Adobe Audition: Help with Hiss audio block

Similar Questions

• Adobe Audition help

  Are there effects on Adobe Audition which will make the song or instrumental play with much better quality?

  I'm going to guess that when you say static, you hear a constant hissing sound (what we would call 'noise').

  If that's the case then the process of noise reduction under the effects/reduction of the noise and the restoration is probably what you are after.  He can't find a sample of only static with no music to get a sample of noise however.  I suggest also that you do not use the default values - rather down the fader to about 20% noise reduction and the amount of reduction up to 10 or 15 dB.  Then make the effect 3 or 4 times, increasing the size of the FFT (in the Advanced menu) and get a noise new printing between each pass.

  However, I must say that this should be a fallback for emergency only - you are better to do some testing to find what part of your string of recording is causing static electricity and repair or replace that.

  If this isn't the sound of hissing and emrecs is right on the cutting/distortion, then frankly there is not much you can do about it.

• Need help with hissing into the exported audio file

  I am trying to guests Records for a new telephone system that requires separate format: CCITT μ-law 8 bit 8 kHz mono

  Audio is recorded in CD quality and I tried a number of different methods to convert (directly record in the format requested, the type of sample conversion and save, conversion of the type of sample and export, then change session settings to match before recording, etc etc.)

  My goal is to save in a high quality format so that I can clean audio (remove no matter what noise, normalize, etc) and then export it to the required compressed format. But I want to do this without adding additional artifact to the sound.

  Suggestions?

  Thanks for the suggestions. I realized what the problem was. To convert the sample type, dithering is enabled by default. This deactivation CONSIDERABLY improves the result.

• Need help with different audio to match in quality

  Hello.  I'll work on a video animation based on the 4 audio clips.

  1, 2, & 3 clips are similar in quality and levels;  Clip 4 sounds more rich and higher levels.

  Re-registration is not an option.

  (Clips 1, 2, & 3 came with a video camera, where the right channel was a lot of noise away from the topic, and the left channel was a lapel mic which was clean but low levels)

  Clip 4 registered only track left and rates are higher and overall quality sounded better)

  I tried to use the hearing to separate into mono tracks, then the right channel where the noise was being dumped.  I then created stereo channels for all 4 clips (just double the left) and added a bit of reverb volume 1,2 & 3 as well as raise closer to Clip 4 - and this ok worked (much better than the originals)

  Below is a video with excerpts from original code 4 (just the left lanes) - would appreciate any recommendations from experienced users in the hearing.  I need to get sound as good as possible before splicing up to do the animation video.

  Also, if I use a main element to make the subitems in Adobe Premiere CS6 and fix then the original clips later in the hearing, these changes to the audio main spread through for subitems - or should I start over with the main audio file enhanced and redo the subitems news?

  Thank you (and I posted this on the forums for hearing on June 30, but did not get a lot of help - thought I'd try here since I use both first and can just if the diving of the subsequent corrections can spread to the subitems)

  It's a shame, but thanks for the reply.

  At receipt of response on the forums of hearing suggesting the "thinness" I heard related to low levels of the low frequency.  Stimulate those with one gets multiband Equalizer close enough varied clips, so should be ready to go.

  Thanks again.

• Help with an Audio Spectrum custom, as I do

  So the plan, I want to do something like this:

  but to do that I need to use the sound keys (which I have) and I don't know how to use it very well so please keep things simple when you reply.
  So, with sound keys, I can make rectangles move to the rhythm of music as here (does not use the audio spectrum in this vid and duplicate, to hear me) they make solid layers of rectangles and make move upward and down to the rhythm of music using the beaches, I know what as the beaches that I need to use in sound keys , but I don't know how correctly do the job of scaling. When I hang up on the scale of the rectangles with the music, it affects both sides, people have said, you must move the pixels rather than scale, then how can I, when I plug it it ends up being extremely small (the rectangles) so I need help to solve these two problems, so please help me don't forget I'm a noob and have no idea how to use equations and stuff. Thank you!

  You need to move the anchor point for your rectangles on one side or the other, so that, when they scale, they will appear only in one direction.

  If you are a "noob", you should really start here: getting started with After Effects. The resources in this link will start your own in a way that will make you able to come up with such things.

• New on Adobe need help with an if then statement

  Hi, I really like what ADOBE Pro 9 can do with forms and neat and everything is included.

  I'm having a problem trying to understand an if then statement for one of my forms and how to make it executable.

  Here is what I have

  I.          Cigna Medical                                           

              (10)       single                                     $  44.00

              (11)       Employee & Child (ren)              $  82.00          

              (12)       Employee & Spouse                 $  99.00                      

              (13)       Family                                     $125.00                      

              (14)       Decline Coverage                         $0.00          Choice: _        Amount: $_

  An employee will be choice an optiopn 10-14 and but that number of choices. After I am about to fill with this number.

  For instnace, if an employee takes option 11, choice: 11 and amount: $ 44.00

  I put the options in a menu drop-down. The drop down menu is titled CignaMedical and Amount_1 title for amount: $_ and I made a text box.  I put this code: if (this.getField("CignaMedical").value == '10') {}
  Amount_1 = 44.00} tab calculation of properties for the Amount_1 of text box on the custom calculation script tab.

  Any help is greatly appreciate

  Yes, you can use an if-else if construction. Something like that (I got the first part because we reuse it):

  CignaMedical = this.getField("CignaMedical").value;

  If (CignaMedical == '10') {}

  44.00 = Event.Value;

  } Else if (CignaMedical == "11") {}

  Event.Value = 82.00;

  } Else if (CignaMedical == '12') {}

  99.00 = Event.Value;

  }

  etc.

• Inability to Adobe to help with the payment failed

  I pay my subscription via PayPal, everything was fine until my payment in July that failed, there was no explanation or reason. I have not contacted Adobe 4 times via their cat because they don't offer phone support for questions of payment? !!!

  Every moment I was told to wait 24 hours and everything will be fine. It is never so I contact them again. They tried to put it down to PayPal with a problem when all my other PayPal payments and subscriptions do not have issues and have PayPal confirm that Adobe have not even tried to take a payment for July.

  I reinstated billing details and implement new agreements of PayPal 8 times, whenever he says it is up to date, but then I don't see the "Oh no!" problem of payment message. I would never give my money so much and Adobe do not seem to consider, or admit that they need to fix something on their end.

  I get given the option of closing my account together and having to create a new account with a different email, how is - this practice or even acceptable? How Adobe can expect from me that loose access to all my files and have to re - download all to use their software when and not even attempt to try to solve this problem?

  Sorry for the mug shot, but does anyone else have any dealing with Adobe on this? How did you fix it?

  Perhaps 800-833-6687.

• Can you Adobe Acrobat help with import of tracking changes and comments in Microsoft Word and convert these annotations and comments in PDF format?

  I have a Word doc huge with more than 3,000 of the changes and comments to track changes. I hope that there is a way that Adobe Acrobat can simplify the conversion of annotations and comments of an annotated PDF file in just a few steps - vs having to do this work manually. Appreciate the tips and recommendations! Thank you!

  Acrobat and Word are quite different types of applications. Namely, Acrobat isn't a word processing application, although many people think that it is and try to use it as such. Therefore, I don't think that this is possible. Annotations in the PDF file are nothing like the changes you can make in a Word file, or vice versa.

• Need help with 3 audio to match a 4th

  Hello.  I'll work on a video animation based on the 4 audio clips.

  1, 2, & 3 clips are similar in quality and levels;  Clip 4 sounds more rich and higher levels.

  Re-registration is not an option.

  (Clips 1, 2, & 3 came with a video camera, where the right channel was a lot of noise away from the topic, and the left channel was a lapel mic which was clean but low levels)

  Clip 4 registered only track left and rates are higher and overall quality sounded better)

  I tried to use the hearing to separate into mono tracks, then the right channel where the noise was being dumped.  I then created stereo channels for all 4 clips (just double the left) and added a bit of reverb volume 1,2 & 3 as well as raise closer to Clip 4 - and this ok worked (much better than the originals)

  Below is a video with excerpts from original code 4 (just the left lanes) - would appreciate any recommendations from experienced users in the hearing.  I need to get sound as good as possible before splicing up to do the animation video.

  Thanks for your suggestions.

  The problem is not the level, because you can just increase the more silent clips to match the rhythm.  The real problem is the difference in quality between the clips.  When you say 4 Clip sounds 'rich', you mean it has the lowest range, more low frequencies, while the other clips sound thin, because they do not have low frequencies.  Keeping in mind that you cannot use an EQ filter to add frequencies that were not registered, my first experience on the 'thin' clips would be to see if a parametric EQ set somewhere around 100 Hz could stimulate the lower part to make them healthier as the good pace.  If this does not work, then maybe you will have to consider deleting some of the low end of the good clip so that it matches what you have in the clips of thin.

• Help with the Mavericks block Photoshop CC & bugs with Illustrator CC?

  I missed an update especially for CC users who have upgraded to Mavericks? Wishing to really I had held off on the upgrade of the operating system - Fortunately my CS4 is still compatible with the update of java, just bought the CC license but wanted to use new applications - now Photoshop CC crashes at launch (have not successfully opened a file in there without having to force to leave it) and Illustrator CC rebounded for a while then stopped. To chance five minutes later the application is started. I left it then reopened to search the GAL seemed even once, good - but then switched between that app and the other, then back to Illustrator CC and took time for her to open. I'm on a 3.4 GHz iMac intel core i7 with 16 GB ddr3 1600 mhz memory, it should not have lag issues and is only a few months old.

  This isn't a crash report, just a report of blocking/freezing (crashes and deadlocks are very different things).

  What this shows is that Photoshop was waiting for the BONE to get police information - and which can take some time if the cache OS font is damaged or incomplete (as you have installed the operating system).

• Need help with an Audio loop with ACE

  I built a graphic in which audio fades out on a button click. I need also the audio loop, but I can't understand how do. I fiddled it of some old code that I had, probably found on the net, and I don't know where to put the parameters in a loop. Everything that it works just like I need to, I just need the looping sound. Can anyone help? Here is the code:

  
  Create sound objects *.

  
  this.createEmptyMovieClip ("holder1", this.getNextHighestDepth ());
  var mySound1:Sound = new Sound (holder1);
  mySound1.loadSound ("yourmusicgoeshere.mp3", true);

  
  action button *.

  necessary variables:
  var onFaded:Function;
  var currentSound:Number = 1;
  var occupied: Boolean = false;
  var counter: Number;
  //

  B2.onRelease = function() {}
  fadeOut (mySound1);
  };
  
  B3.onRelease = function() {}
  fadeOut (mySound1);
  };
  
  bStop.onRelease = function() {}
  mySound1.stop ();
  currentSound = 0;
  };

  
  fade out function *.

  
  function fadeOut(theSound:Sound) {}
  counter = 100;
  busy = true;
  clearInterval (nInterval);
  nInterval = setInterval (adjustSoundDown, 10, theSound);
  }
  function adjustSoundDown(theSound:Sound) {}
  If (counter < = 1) {}
  clearInterval (nInterval);
  theSound.stop ();
  busy = false;
  onFaded();
  } else {}
  -counter;
  theSound.setVolume (counter);
  }
  }

  the best you can do if you are streaming your sound is to use a listener onsoundcomplete to restart your sound when it is finished.

• Help with editing audio in a video with iMovie.

  Hey, how can I change audio in my video removing just the voice of the person talking, but keeping the substantive points? I tried all possible applications for this. Even iMovie. But its still really hard to understand. Please tell me as soon as POSSIBLE. I have a presentation soon. Thanks :)

  If I understand the person talking is on the same audio track as background music.  I'm not aware of any software Smart recognize what is voices and which is music and remove one of them.   Perhaps you could find a copy of the same or similar background music and use it instead of the current audio.

  Geoff.

• Need help with Player audio/video from MPCStar

  Hello! I have mpcstar dvd on my system and after the removal of some drivers to remove programs that I can't watch videos on the files saved., except that the sound can be heard same files. Please can you help me solve this problem?

  [Moved - IE8, XP]

  Hello

  Have you tried to uninstall/reinstall MPCStar?

  There is MPCStar forums at: http://www.cometforums.com/forum/74-mpcstar-general-discussions

  You will probably come from people who know more about the program and get better help there.

  Don

• Pls help with the audio driver

  Hi, I have a Fujitsu Siemens amilo pro v2065, when I installed win7 was not sound, I tried several drivers but failed. the sound chip is AD1986A on Intel 915 pm here's a link to the datasheet:
  I'd appreciate any help really
  Thank you

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/threads

  Link above is "Preparing for Windows 7" Forum.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is Windows 7 Forums.

  Windows 7 questions/answers/suggestions should be directed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• help with source audio tracks in the timeline.

  Why do I get the 8 audio tracks when I insert a clip of my source window on my calendar, when I preset my calendar for only 4 audio tracks

  If your video clips have 8 audio tracks the chronology will add the additional track to make all clean. If your right click an item in the project pane and select Modify/channel audio, you can change the audio configuration.