Help with an Audio Spectrum custom, as I do

Similar Questions

• Need help with different audio to match in quality

  Hello.  I'll work on a video animation based on the 4 audio clips.

  1, 2, & 3 clips are similar in quality and levels;  Clip 4 sounds more rich and higher levels.

  Re-registration is not an option.

  (Clips 1, 2, & 3 came with a video camera, where the right channel was a lot of noise away from the topic, and the left channel was a lapel mic which was clean but low levels)

  Clip 4 registered only track left and rates are higher and overall quality sounded better)

  I tried to use the hearing to separate into mono tracks, then the right channel where the noise was being dumped.  I then created stereo channels for all 4 clips (just double the left) and added a bit of reverb volume 1,2 & 3 as well as raise closer to Clip 4 - and this ok worked (much better than the originals)

  Below is a video with excerpts from original code 4 (just the left lanes) - would appreciate any recommendations from experienced users in the hearing.  I need to get sound as good as possible before splicing up to do the animation video.

  Also, if I use a main element to make the subitems in Adobe Premiere CS6 and fix then the original clips later in the hearing, these changes to the audio main spread through for subitems - or should I start over with the main audio file enhanced and redo the subitems news?

  Thank you (and I posted this on the forums for hearing on June 30, but did not get a lot of help - thought I'd try here since I use both first and can just if the diving of the subsequent corrections can spread to the subitems)

  It's a shame, but thanks for the reply.

  At receipt of response on the forums of hearing suggesting the "thinness" I heard related to low levels of the low frequency.  Stimulate those with one gets multiband Equalizer close enough varied clips, so should be ready to go.

  Thanks again.

• Need help with creation of legend custom pass/fail

  Hello

  I need help in creating custom legends of success/failure to Quiz questions. Here, I enclose the screenshot for your reference, how I wanted to.

  Thanks for your help in advance.

  Thank you

  Ajay

  The question is that whatever color of the upper-left pixel of the image, the color will be considered transparent.  If the BMP image for this custom caption can have the upper-left pixel as white, then any place in the legend that is white will appear transparent.

  I recommend that the change in developer top left pixel of the image in Photoshop to roses or bright green, a color that does not appear anywhere else in legend. Then, it should look as expected. For images with rounded corners, it's pretty easy.  For images that have square corners, you may need to add a 1 or border 2 pixels around the image and brand that border the transparent color.

• Adobe Audition: Help with Hiss audio block

  Hey guys, it's perhaps a question of novice, but hey, im a beginner. I don't have much experience with the hearing aid, but im me needing to use it on a project im working on find. Im trying to keep the end of an audio clip going for a certain period of time then I was copying it and pasting on the back part of my audio wav. The only thing is, whenever the indicator time hit him pasted a sound, it has a redundant hiss him so it sounds copied... is anyway to get around that? I tried things like DeClicker but nothing seems to happen that I need. Anyone has any advice for me so it resembles a transition smoothly from one clip stuck to the other? It also seems that the pasted clips get stronger as the idicator of time gets closer to the end of my sound wav.

  Well.I have played around with it and could not understand what went wrong, so I took a wide lightsaber buzz of Internet and it mixed with the sound of ignition of the file I posted here, and that seems to work very well. So we'll leave it just as unanswered. Thanks for trying guys. I appreciate the quick responses.

• Need help with 3 audio to match a 4th

  Hello.  I'll work on a video animation based on the 4 audio clips.

  1, 2, & 3 clips are similar in quality and levels;  Clip 4 sounds more rich and higher levels.

  Re-registration is not an option.

  (Clips 1, 2, & 3 came with a video camera, where the right channel was a lot of noise away from the topic, and the left channel was a lapel mic which was clean but low levels)

  Clip 4 registered only track left and rates are higher and overall quality sounded better)

  I tried to use the hearing to separate into mono tracks, then the right channel where the noise was being dumped.  I then created stereo channels for all 4 clips (just double the left) and added a bit of reverb volume 1,2 & 3 as well as raise closer to Clip 4 - and this ok worked (much better than the originals)

  Below is a video with excerpts from original code 4 (just the left lanes) - would appreciate any recommendations from experienced users in the hearing.  I need to get sound as good as possible before splicing up to do the animation video.

  Thanks for your suggestions.

  The problem is not the level, because you can just increase the more silent clips to match the rhythm.  The real problem is the difference in quality between the clips.  When you say 4 Clip sounds 'rich', you mean it has the lowest range, more low frequencies, while the other clips sound thin, because they do not have low frequencies.  Keeping in mind that you cannot use an EQ filter to add frequencies that were not registered, my first experience on the 'thin' clips would be to see if a parametric EQ set somewhere around 100 Hz could stimulate the lower part to make them healthier as the good pace.  If this does not work, then maybe you will have to consider deleting some of the low end of the good clip so that it matches what you have in the clips of thin.

• Need help with an Audio loop with ACE

  I built a graphic in which audio fades out on a button click. I need also the audio loop, but I can't understand how do. I fiddled it of some old code that I had, probably found on the net, and I don't know where to put the parameters in a loop. Everything that it works just like I need to, I just need the looping sound. Can anyone help? Here is the code:

  
  Create sound objects *.

  
  this.createEmptyMovieClip ("holder1", this.getNextHighestDepth ());
  var mySound1:Sound = new Sound (holder1);
  mySound1.loadSound ("yourmusicgoeshere.mp3", true);

  
  action button *.

  necessary variables:
  var onFaded:Function;
  var currentSound:Number = 1;
  var occupied: Boolean = false;
  var counter: Number;
  //

  B2.onRelease = function() {}
  fadeOut (mySound1);
  };
  
  B3.onRelease = function() {}
  fadeOut (mySound1);
  };
  
  bStop.onRelease = function() {}
  mySound1.stop ();
  currentSound = 0;
  };

  
  fade out function *.

  
  function fadeOut(theSound:Sound) {}
  counter = 100;
  busy = true;
  clearInterval (nInterval);
  nInterval = setInterval (adjustSoundDown, 10, theSound);
  }
  function adjustSoundDown(theSound:Sound) {}
  If (counter < = 1) {}
  clearInterval (nInterval);
  theSound.stop ();
  busy = false;
  onFaded();
  } else {}
  -counter;
  theSound.setVolume (counter);
  }
  }

  the best you can do if you are streaming your sound is to use a listener onsoundcomplete to restart your sound when it is finished.

• Help with editing audio in a video with iMovie.

  Hey, how can I change audio in my video removing just the voice of the person talking, but keeping the substantive points? I tried all possible applications for this. Even iMovie. But its still really hard to understand. Please tell me as soon as POSSIBLE. I have a presentation soon. Thanks :)

  If I understand the person talking is on the same audio track as background music.  I'm not aware of any software Smart recognize what is voices and which is music and remove one of them.   Perhaps you could find a copy of the same or similar background music and use it instead of the current audio.

  Geoff.

• Need help with Player audio/video from MPCStar

  Hello! I have mpcstar dvd on my system and after the removal of some drivers to remove programs that I can't watch videos on the files saved., except that the sound can be heard same files. Please can you help me solve this problem?

  [Moved - IE8, XP]

  Hello

  Have you tried to uninstall/reinstall MPCStar?

  There is MPCStar forums at: http://www.cometforums.com/forum/74-mpcstar-general-discussions

  You will probably come from people who know more about the program and get better help there.

  Don

• Pls help with the audio driver

  Hi, I have a Fujitsu Siemens amilo pro v2065, when I installed win7 was not sound, I tried several drivers but failed. the sound chip is AD1986A on Intel 915 pm here's a link to the datasheet:
  I'd appreciate any help really
  Thank you

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/threads

  Link above is "Preparing for Windows 7" Forum.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is Windows 7 Forums.

  Windows 7 questions/answers/suggestions should be directed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• help with source audio tracks in the timeline.

  Why do I get the 8 audio tracks when I insert a clip of my source window on my calendar, when I preset my calendar for only 4 audio tracks

  If your video clips have 8 audio tracks the chronology will add the additional track to make all clean. If your right click an item in the project pane and select Modify/channel audio, you can change the audio configuration.

  

• Need help with Audio Spectrum Max Height!

  So I have an audio spectrum I want to stop when it gets to a certain height in the computer and not just go on the top and out of sight.

  I thought maybe I could do layer that covers the audio spectrum, but not the other objects in the model.

  Any help?

  Here's and example of what I mean

  https://youtu.be/yiqznDG-uE0?t=25s

  At roughly 0:27 you will see the stops of the spectrum at a certain height and go any higher.

  Snap out with a mask or a linear wipe.

  Mylenium

• Help! No audio output device is installed on a gateway with Vista problem

  I searched and nothing found which strives to resolve this problem. There the cirlce Red w / White x where is the volume control button.

  -J' tried to update the driver but it says that it is up-to-date
  -J' tried something with restart of audio and audio endpoint in services

  The computer is a Gateway laptop model: mt6723
  Sound, video and game controllers: Sigmatel High Definition Audio CODEC, unsupported Standard Game Port

  If anyone has any info that can help with will be greatly appreciated
  Thank you

  Alfred

  These hardware scan sites are a waste of time, better to look manually as shown above.

  Sound Device arise under the sounds?

  Otherwise:

  REBOOT - under sound click right panel where it says no Audio devices installed - check Show
  -Show hidden devices - disabled devices highlight speakers - lower right properties - turn on the device

  What are the drivers for your direct gateway system

  You can have this one - check under Device Manager sound

  32-bit Vista SigmaTel Audio Driver Version: 6.10.5365.0 - 05/10/2007
  HTTP://SUPPORT.GATEWAY.COM/SUPPORT/DRIVERS/GETFILE.ASP?ID=21535&DSCR=SIGMATEL%20AUDIO%20DRIVERVERSION:%206.10.5365.0&UID=242736959

  If you need it - download - SAVE - go to where you put it - RIGHT CLICK - RUN AS ADMIN - after restart
  each installation of the driver.

  Don't forget to compare versions in device - sounds like audio often rollback - so do drivers Manager
  of course, the installed version is 6.10.5365.0 - Run - Reboot - check until this version presents itself.

  Then repeat with this last one - Vista 6 - 10.5939
  HTTP://SUPPORT.GATEWAY.COM/SUPPORT/DRIVERS/GETFILE.ASP?ID=22199&DSCR=IDT/SIGMATEL%20AUDIO%20DRIVER%20VERSION:%206.10.5939.0&UID=242738947

  Don't forget to compare versions in device - sounds like audio drivers Manager often rollback
  Run - Reboot - check until this version presents itself.

  If the driver will update just don't use this method then reinstall (and later check the version).

  How to do to reinstall IDT (was Sigmatel) audio driver on the Vista system migrated
  http://www.IDT.com/content/Vista/HTML/index.html

  To find the only other drivers online gateway for your mt6723
  http://support.gateway.com/support/drivers/ddaStep.asp?tab=all

  Another thread with a possible fix
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/b5e3250b-2ffc-443e-8e67-4b0feaf6612e/

  ---------------------------------------------
  Pipersmyst last nights number you can try the above in my 1st message or do a system restore
  up to a point before the problem however, you will need to update your drivers for installing SP1.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Microsoft Vista SP1 update is not available because the audio driver
  http://www.IDT.com/?app=Knowledgebase&ContentId=4836

  Rob - bicycle - Mark Twain said it is good.

• Need help with HP8050 custom made size

  I would like to print photos of 8 x 12 inch on my Photosmart Hp8050.  Pls tell how to set up the printer for this custom setting. I'm on Mac OS10.6.8.

  Thank you.

  With your help, I now understand the "custom" option and provided a custom option 8x12in. "."

  Ive tried to test this custom functionality by inserting a sheet of A4 (different size than 8 x 12)... and get the following error message:

  Paper size error: the custom paper size specified is not supported in the selected tray.

   

• help with audio! As soon as possible!!!

  If the audio on the monitor of the program does not play but his reading in the source monitor please help? How he resided in the program monitor.

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  Exactly what version of the program do you have problems?

  Specify the name of the program that you use, so a moderator can move this message to the correct forum

  This Cloud forum is not for help with problems of program... program would be Photoshop Lighroom or Muse or?

• (HELP) When you export sectors with no audio sound glitches

  I have a problem when I have a video and a song and there's a cut at the end of the audio where the video plays without audio. The problem is when the video export audio playback very well until he reaches the part with no audio, once he gets there he plays than spazzes out until the end of the video. I export the audio like this:

  -Format: AAC

  -Sample Rate: 48000 Hz

  -Channels: stereo

  -Audio quality: high

  Update to 2015.2.