Adobe first continues to ask me for a file, I did not.

Similar Questions

• Firewall Windows 7; "Windows continues to ask me for permission allow through firewall application each time.

  * Original title: Firewall Windows 7 problem

  Even after install all windows updates continues to ask me for permission allow through firewall application each time. I mean whenever I run a network based App. can someone tell me what is the problem its very annoying.

  Hello

  Sorry for the inconvenience caused.

  This support article below should help you: http://windows.microsoft.com/en-us/windows/communicate-through-windows-firewall#1TC=windows-7

  Also, some advanced steps of troubleshooting for firewall issue.

  You can reset the defaults in the Windows Firewall with advanced security and check from the link below.

  https://TechNet.Microsoft.com/en-us/library/ff428142 (v = ws.10) .aspx

  If the problem persists, create a local user account and check.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  I hope this helps. Back to us for other queries. We are happy to help you!

• I BOUGHT ADOBE PHOTO ELEMENTS 14 AMAZON I CHOSE A MAC DOWNLOAD DOWNLOADED WHEN I TRIED TO INSTALL TI IT HE ASKED A SERIAL NUMBER WHICH I DID NOT ALL PROVIDED AMAZON WAS AN ACTIVATION CODE OF 26 FIGURES THAT ADOBE HAS REJECTED WHEN I ENTRY IN SER

  I BOUGHT ADOBE PHOTO ELEMENTS 14 AMAZON I CHOSE A MAC DOWNLOAD DOWNLOADED WHEN I TRIED TO INSTALL TI IT HE ASKED A SERIAL NUMBER WHICH I DID NOT ALL PROVIDED AMAZON WAS AN ACTIVATION CODE OF 26 FIGURES THAT ADOBE HAS REJECTED WHEN I INSCRIPTION IN BOXES OF SERIAL NUMBER PLEASE HELP

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• DriverMax update drivers. Among the updates was for audio and subsequently did not sound. Soundcard (?) is Realtek AC97 Audio, XP Pro 32 bit SP3

  original title: no sound

  I used drivermax (for the first time) to update the drivers. Among the updates was for audio and subsequently did not sound. I tried to restore to a date backup earlier, but without success. My soundcard (?) is Realtek AC97 Audio, XP Pro 32 bit SP3

  Bad move!

  PC manufacturers sometimes 'tie' in the drivers for their machines so that the only reliable method to update either directly through their Web sites. DriverMax will detect your audio device and go to Realtek to obtain the driver. Not the solution, unfortunately

  MS Update also not as he says, is up to date...

  Go to the website of the manufacturer of the PC/laptop and find the support page for your machine. Download the audio drivers from here and install it.

  If it is a machine that you have built yourself, go to the website of the manufacturer of the motherboard and do the same thing from there.

  See you soon,.
  Jerry

• My sew creative adobe keeps telling me to renew my subscription but I did not renew until dec 7 2015 because of this that I don't start in photoshop or illustrator

  My sew creative adobe keeps telling me to renew my subscription but I did not renew until dec 7 2015 because of this that I don't start in photoshop or illustrator

  When you say that you need to renew, I'm not quite sure what is the message you get. If the suggestions below do not cover, please indicate the specific message you see.

  If you are prompted for a serial number in the creative clouds,

  See this link:https://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

  If you open an application that belongs to your creative cloud membership and you see a message indicating that you are running a trial, please see this link: why the app launched in Trial mode?

  Guinot

• Windows update installation update 4 of 5 for 2 hours and did not finish. 28/10/10

  Windows update installation update 4 of 5 for 2 hours and did not finish.  28/10/10

  Hi Mandude,

  What Windows version\edition you run the computer?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard > check if installation of update takes place more quickly

  Step 2: You can follow the steps mentioned in the article below, which deals with a similar question

   

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• I have installed Adobe, however, he says in a local block that I did not.  I can't open a file "adobe" I need today.

  I have installed Adobe, however, he says in a local block that I did not.  I can't open a file "adobe" I need today.

  Hello

  Please refer to the following link

  Apps Control Panel does not show installed Adobe Creative Cloud applications

  Pre-installed applications not shown as it is installed

  Not all applications displayed by download | Adobe Creative Cloud desktop application

  Troubleshoot Adobe Creative cloud download, install and update questions

• Windows 7 continues to ask drivers for Canon Rebel _

  Windows 7, asking drivers for Canon Rebel

  How your question is related to Windows Update (compared to the Windows upgrade)?

  Contact the Canon Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Adobe first CC 2014 - audio droping for multicam

  Hi all

  I have a problem with multicam first CC and it seems to fall during the switching of audio mutlicam cameras. I don't understand what causes this because it happens about 4 times by an hour, completely random sequence. Now, I don't see any wrong settings, but with the expanded view, I also see that the waveform is missing:

  

  Any ideas on how to get the sound back, don't know what happened but all ideas are appreciated. I have re-record audio, so I think that it is not a cache problem. The audio is a direct of the mixer and complete contribution without jumping through the video.

  OK I finally thought to it. Apparently the bug occurs if "Fix you" the multicam. Example, I was not happy with the selected camera is returned and re-released it. Becomes a cafeteria Lady 62yo, which is 1 month not be retired and a child said that he does not eat a particular food and she just all repaired and serves it as the first.

  What happens is the 1st time around, I used example 1 camera, did not like it that I saw is returned spent at camera 3, audio for Camera 2 swung first. She has always chosen the third audio was not the video (example no. 2: I used the camera 3 camera 1 first past selected audio from camera 2). I updated the multicam use only the Audio track 1 and the rest are all non-existent, since I wanted to use only audio that has been a direct input of the mixing console not to leave the microphones on the cameras, that's why the fall which happened. Why first done now it's anybody's guess, but the way to solve this problem is to pass on the parts where there is no audio clicking the audio now ALT while going multi-cameras and choose the audio source, as you can see from the screenshots below.

  

  

  

  Of course he left one of the unresolved issues and this is how to prevent this to choose a random reissued multicam clip when you turn off or restart your computer, in other words you can not. So my advice to those who seek to solve this problem is the 1st to find clips that are problematic, then change the source audio and just do the encoding. Except that it can be solved with a small fix, just replace the audio in the original sequence by one you want for each camera, but then a buzz is available in 1 - 2ms whenever you change cameras in my case, working on a rock concert, where most of the time the camera every 3 seconds changes It starts to resemble a bee hive in a few minutes, and I don't have a solution for this at the moment.

• I changed master PW and something went very wrong; keeps asking me for FIPS 140 page does not load. Help

  Today, I changed master PW. I'm sure that I entered old master PW properly and new (twice) correctly entered also.

  Apparently, he did not. Something very wrong. I can not load the page, get the message:
  Required PW: Please enter the m for encryption FIPS 140 pw, key and.

  I write everything down, I tried to go home, but nothing.

  I also remember old master PW.

  IN ADDITION, I CANNOT CLOSE FIREFOX, CONTINUE TO SEE MAC OSX "PINWHEEL"...

  HELP ME PLEASE.

  Hi Cor - El
  I want to thank you for taking the time to write this easy to follow the answer. I went directly to the folder via the specified path, tire/secure the 2 files deleted and found I could enter a new master pw without any problem.
  I also read that this (and the previous) FF master pw modification is not allowed...
  Well, damn. Guess that's why it is important to read the instructions FIRST.
  Thanks again.
  GirlWithDragonTattoo

• I change a clear WOOD to stop my laptop myother now ask me for a passward I do not know the passward

  I have other computer laptop windows 7 and I change of clear wood to stop and now the laptop is asking me a password of windows screen I don't know what can do to go change my laptop back wood I try f2 it did not

  Hello

  You must contact the manufacturer of your computer in order to change the boot priority in BIOS (Basic Input Output System).

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126/en-us

• Hello is possible to get a free license for a month for adobe photoshop cc because I went on vacation and I did not have the opportunity to test?

  Good evening would it be possible to return a free license for within one month for Adobe Photoshop CC because I went on vacation and I do not have has the opportunity to test?

  Hi tay-fun@livefr,

  We are sorry but it is not possible to reset the trial but you can try and use it on another machine with a different identifier (if possible) Adobe.

  -Pierre

• How can I get refund without all the run around. Bought for $23,88 and did not work.

  .

  Hello

  An answer depends on where you bought the subscription for.  Please take a look at your purchase confirmation email.

  a Google Play Store

  Subscriptions on Google Play - game Google Help

  (b) Apple App Store

  Contact Apple - Apple Support support

  iTunes - account & billing - Apple Support

  (c) adobe web site

  Cancel your subscription or membership. Acrobat, services Cloud of Document PDF

  If none of the above answers your question, please contact Adobe customer service directly.  Sorry for the inconvenience.

• I followed the steps for E-learning but did not have an access code

  I have signed up for the microsoft free e-learning, created windows live mail, but did not get the access code I need. How to do it?

  Hi momma05,

  You may need to contact the support of Microsoft E-Learning for help on this one.

  Microsoft Learning Support Microsoft Certification l help l cat l Live Local RSCs

• "Hide extension for known file types" does not work!

  It drives me crazy. I just want to see all file extensions in Explorer, so I uncheck the option on > tools > "Folder Options" and that the "View" tab It does not work! When I apply the changes or select "Apply to all folders" it does nothing even if it takes some time. Yes I closed and reopened the Explorer, even rebooted the system, it did not help. My settings were in fact like this, but I changed yesterday for a while and I now want to reverse the trend, but he would just go back. How to solve this problem? My XP is up to date.

  Hello

  I haven't used this for many years so YMMV.

  Beyond the Hide/Unhide check, there may be individual entries in the registry keys that include the termNeverShowExt

  Backup of the registry.

  Scan of the registry for the term NeverShowExt lokk to these entries and delete the ones you don't want.

  As usual with interferences of registry there no guarantee about what can happen. You do (or not) and take responsibility for the consequences.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  It is provided as is without any warranty and not an entitlement.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET