15 - ba016na: M.2, adding to 15-ba016na sata

Similar Questions

• The mSata 32 GB drive is usable after adding a 256 GB Sata disk as a boot disk? Dell XPS 8700 desktop computer.

  Hello

  I plan on adding a 256 GB Sata Drive in a desktop Dell 8700 to use as your windows startup disk. I will then use the ordinary 2 TB HDD as a data reader. I've read some posts on this and think that I can do. I'm still a bit fuzzy where to find iso Windows 8.1 I need though.

  I want to know if I can still use the 32 GB mSata reader as it was planned, with Intel Rapid Storage? If this is not the case, how can I to use?

  Thank you

  Gord

  PS: I am computer enough to get me into trouble :-)

  Hello

  mSATA reader uses the SSD technology to make the system faster. If you add an SSD technology TSRI functionality could be cancelled.

  However, to use the SSD on the system please change the SATA mode in BIOS to AHCI TSRI. Once you add the mSATA card can be used by car from additional data. You will need a reinstall the operating system to install on the system drive. You can use the link below to place a request to reinstall operating system drive (us. only).

  http://Dell.to/TmYffg

  If you are not able to make a request to the disk from the link above, then please send me a private message with serial number of the computer, name registered in the purchasing system and email address so that I can check out what we can do. To send a private message, click on my name and send private message.

• Try adding card h8 Startech Sata III - 1360t

  Okay, I need help. I have a H8 - 1360t I'm in perpetual on upgrade mode. Currently, I have stock HDD and two Sandisk Extreme 240 GB SSD hybrid Seagate Momentus xt 750 GB disc. I had to move the stock HARD drive in a drive bay with a switchable dock hot, because of the single holder holding three discs. I also maxed out the RAM to 16 GB and have added a GTX670 4 GB video card. The system is used for games and video editing.

  Long story short, I need another port SATA 6 Gbps. I tried to order a card Startech out of Amazon, a PEXESAT, with 2 internal and 2 external ports 3221. I put the riders for in-house, in accordance with the instructions, and my PC would not boot at all. I still had no video to see what type of error it was, as appropriate. PC stops after 10 seconds, don't try again, no luck. Take the card everything starts normally. Check the drivers, also those on the cd, even trying to download the most recent on the site of Startech. Nothing works. I have for a Highpoint RocketRaid, which came yesterday. Problem is, it has the fat PCI-e connectors. No luck on that front, either. They finally reached Startech technical support, he said probably a chipset compatibility issue. I'm supposed to check with my HPE-250 based Iona. One thing I noticed is that drivers will appear not as being installed, and my Board of Formosa was built with Intel Sata, who appears in Device Manager. What is the conflict? Will be that the Platinum support third party RAID card? My ultimate goal is to change put the hybrid with a SSD pro Samsung 840. I do a lot of video editing, so Sata 3 is a must,

  Where I am now, it's that I found another Startech card on the HP store. This is the PEXSAT32, which has only two internal ports and not riders. He also said he uses native Windows drivers, as opposed to their. This will help? Or is the root cause of built in RAID Intel? Thanks for any help you guys can provide...

  Yes! Who did the trick. It is the conflicting chipset. I had the PEXSAT32 this afternoon and it was immediately recognized. Only problem I had was that Windows said she doesn't have a driver for the Marvell chipset. I found it on the site of Startech. He ran and he was running. I goof and hooked my SSD who had BONE top pay-per-view, which resulted in a "training"not accessible "error.". Switched around and it loaded right up. Haven't really run of a landmark, but all my programs seem to run faster than ever out of the map.

  Here is the driver for the card, in case someone needs it: http://www.startech.com/Cards-Adapters/HDD-Controllers/SATA-Cards/2-Port-PCI-Express-SATA-6-Gbps-Controller-Card~PEXSAT32#dnlds

  Thanks for all your help. Now I will go to 32 GB of RAM, (I bought a Windows7 Pro update today) and the Samsung EVO. Think I might try to upgrade the PSU, the 600 stock me kind of worried about being hungry juice. I think a 850 watts. Have a great day and thanks again! Brian

• Adding second DVD - Rom SATA HP Pavilion with only 2 SATA power connectors.

  Try to add a second SATA DVD Rom but do not see more SATA power connectors?  I tried to discuss with Tech, desperate!  Don't understand.  The system came with a SATA hard drive and a SATA DVD/BlueRay so both SATA power connectors are used.  I do not see another SATA power connector in the system, but there are at least 2 connectors SATA DATA more on the system board.  You can even add the old style DVD of as the connectors on the system board do not exsist for the old style DVD ROM.  What they do a converter to SATA power adapter or am I missing something?  Strange.

  If there is not a spare SATA power connection, maybe sometjhing like this would help:

  http://www.satacables.com/HTML/Molex-to-SATA-power-15-pin-ADA.html

• Adding disk hard BIOS setting

  I added the 1 TB SATA drive.

  Now things are going wrong after reboot without initial flaw. No USB, slow performance. Starts at W8.1, but something wrong with the USB devices.

  I see a short menu at startup. says press ctrl-I to define the two hard drives. However, this brings me to any hardrive settings.

  I looked in the BIOS setting and the disks are configured in RAID. Is it OK? I haven't changed anything!

  Thanks, nice to hear that my settings are good. FYI the SATA drive was an ext SATA disk with only data, not bootable. I'm not going to change anything more. However the Sharkoon had a USB connection too that I had to use when my system recovery with Norton disk recovery disc. But the last time was already a long time and now I have True Image as a backup utility.

  But end good all good.

  Thanks again for your support in this matter.

• Speed of Gbps Max SATA motherboard A8M2N-(NodusM3) in m7750n PC?

  HP Pavilion Media Center TV m7750n desktop PC;
  with: A8M2N-(NodusM3) motherboard;
  Features of HP online: "Serial ATA; Each connector supports 1 disk serial ATA-150. »
  Comes with 1: 400 GB SATA-HD;
  Add 1: 1.5 TB SATA HD that works @ 3 GB/s.
  New State to the HD instructions (paraphrase):
  "If you add / 3 GB/s HD to 1.5 GB/s motherboard, must add jumper to slow HD 1.5 GB.
  Issues related to the:
  (1) what is the maximum speed SATA GB/s taken in charge by the motherboard A8M2N-(NodusM3) in m7750n PC?
  (2) what Gbit/s speed is the original 400 GB SATA - HD (supplied with the PC)?
  (3) is there another thing RE: adding 1.5 TB SATA HD that I need to know?
  Thank you ahead for answers to any of these!
  [For not wasting time of the Council, have looked through all the available HP online features, but may have missed or misunderstood something.]
  w_hp-pc
  [email protected]

  Be aware that some systems will not show 3.5 the 4.0 GB due to a 32 bit OS.

• Suddenly V. slow start-up - how to remove the 'mouse Microsoft & detection (USB) keyboard driver?

  OK, I have a common problem with starting my PC under Windows 7 64-bit. It was all pretty quick start for the last month or so that I had installed. Then it started to freeze for several minutes (anything from 5 minutes to 10 minutes) during boot to the Windows loading screen.

  Since then, I tried different things so he can start normally once again, including the tings which should theorectically not affect him as they have all been there before this problem started and starting very well, this includes:

  Looking at these latest material changes such as I added HD
  Change the SATA disks on (I've got 3)
  Get startup in MSconfig to use cores max (this is a quad core) & memory (4 GB)
  By looking at the files bootlog (Nothing don't jump other than I apparently trying to load a couple of drivers twice - I have listed this morning at the bottom of this message for reference bootlog)
  Recovering to a point a month before the problems started in the hope that it will be possible to uninstall the newer drivers that might be the problem, and that's where I noticed what I believe could be the cause, as seems to be the point where it went wrong.

  I had added a Microsoft Mouse and keyboard and the WU offered an optional update from:

  Microsoft Microsoft mouse - other hardware - & detection (USB) keyboard driver

  After installation of this I'm pretty certain that the softstart right down, so I tried to uninstall it. Only I can't find a way to do it. Like when I do a restore of the system to a point before the driver install and the problem that occur, this is not the driver, that just seems to keep. I then uninstalled Intellipoint mouse and keyboard and re-installed mouse PS2 standard. At the same time, I removed my Microsoft Mouse Wireless USB keyboard &, all without effect. I restored my system again and I'll be back to what, according to me, the problem is who is the...

  Microsoft Microsoft mouse - other hardware - & detection (USB) keyboard driver

  But with no obvious way or to withdraw, I can't confirm that.

  Other notable points:
  During the startup, the HD access is constant, so it works like crazy.
  The keyboard will be insensitive to things like capslock or numlock if for the first six months of waiting, when NumLock is on and for the second half of waiting, when NumLock is off. I think that my default setting is for numlock off the coast.

  Help, it's torture, especially when you see that the sub boots 10 seconds on the web.

  Cheers, Jamie.

  For reference: ntbtlog.txt
  Microsoft (R) Windows (R) Version 6.1 (Build 7600)
  10:33:29.421 1 11/2010
  Loaded driver \SystemRoot\system32\ntoskrnl.exe
  Loaded driver \SystemRoot\system32\hal.dll
  Loaded driver \SystemRoot\system32\kdcom.dll
  Loaded driver \SystemRoot\system32\mcupdate_GenuineIntel.dll
  Loaded driver \SystemRoot\system32\PSHED.dll
  Loaded driver \SystemRoot\system32\CLFS. SYS
  Loaded driver \SystemRoot\system32\CI.dll
  Loaded driver \SystemRoot\system32\drivers\Wdf01000.sys
  Loaded driver \SystemRoot\system32\drivers\WDFLDR. SYS
  Loaded driver \SystemRoot\system32\DRIVERS\ACPI.sys
  Loaded driver \SystemRoot\system32\DRIVERS\WMILIB. SYS
  Loaded driver \SystemRoot\system32\DRIVERS\msisadrv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\pci.sys
  Loaded driver \SystemRoot\system32\DRIVERS\vdrvroot.sys
  Loaded driver \SystemRoot\System32\drivers\partmgr.sys
  Loaded driver \SystemRoot\system32\DRIVERS\volmgr.sys
  Loaded driver \SystemRoot\System32\drivers\volmgrx.sys
  Loaded driver \SystemRoot\system32\DRIVERS\intelide.sys
  Loaded driver \SystemRoot\system32\DRIVERS\PCIIDEX. SYS
  Loaded driver \SystemRoot\System32\drivers\mountmgr.sys
  Loaded driver \SystemRoot\system32\DRIVERS\atapi.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ataport. SYS
  Loaded driver \SystemRoot\system32\DRIVERS\amdxata.sys
  Loaded driver \SystemRoot\system32\drivers\fltmgr.sys
  Loaded driver \SystemRoot\system32\drivers\fileinfo.sys
  Loaded driver \SystemRoot\System32\Drivers\PxHlpa64.sys
  Loaded driver \SystemRoot\System32\Drivers\Ntfs.sys
  Loaded driver \SystemRoot\System32\Drivers\msrpc.sys
  Loaded driver \SystemRoot\System32\Drivers\ksecdd.sys
  Loaded driver \SystemRoot\System32\Drivers\cng.sys
  Loaded driver \SystemRoot\System32\drivers\pcw.sys
  Loaded driver \SystemRoot\System32\Drivers\Fs_Rec.sys
  Loaded driver \SystemRoot\system32\drivers\ndis.sys
  Loaded driver \SystemRoot\system32\drivers\NETIO. SYS
  Loaded driver \SystemRoot\System32\Drivers\ksecpkg.sys
  Loaded driver \SystemRoot\System32\drivers\tcpip.sys
  Loaded driver \SystemRoot\System32\drivers\fwpkclnt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\volsnap.sys
  Loaded driver \SystemRoot\System32\Drivers\spldr.sys
  Loaded driver \SystemRoot\System32\drivers\rdyboost.sys
  Loaded driver \SystemRoot\System32\Drivers\mup.sys
  Loaded driver \SystemRoot\System32\drivers\hwpolicy.sys
  Loaded driver \SystemRoot\System32\DRIVERS\fvevol.sys
  Loaded driver \SystemRoot\system32\DRIVERS\disk.sys
  Loaded driver \SystemRoot\system32\DRIVERS\CLASSPNP. SYS
  Loaded driver \SystemRoot\system32\DRIVERS\cdrom.sys
  Loaded driver \SystemRoot\System32\Drivers\Null.SYS
  Loaded driver \SystemRoot\System32\Drivers\Beep.SYS
  Loaded driver \SystemRoot\System32\drivers\vga.sys
  Loaded driver \SystemRoot\System32\DRIVERS\RDPCDD.sys
  Loaded driver \SystemRoot\system32\drivers\rdpencdd.sys
  Loaded driver \SystemRoot\system32\drivers\rdprefmp.sys
  Loaded driver \SystemRoot\System32\Drivers\Msfs.SYS
  Loaded driver \SystemRoot\System32\Drivers\Npfs.SYS
  Loaded driver \SystemRoot\system32\DRIVERS\tdx.sys
  Loaded driver \SystemRoot\system32\drivers\afd.sys
  Loaded driver \SystemRoot\System32\Drivers\aswRdr.SYS
  Loaded driver \SystemRoot\System32\Drivers\aswTdi.SYS
  Loaded driver \SystemRoot\System32\DRIVERS\netbt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\wfplwf.sys
  Loaded driver \SystemRoot\system32\DRIVERS\pacer.sys
  Loaded driver \SystemRoot\system32\DRIVERS\netbios.sys
  Loaded driver \SystemRoot\system32\DRIVERS\serial.sys
  Loaded driver \SystemRoot\system32\DRIVERS\wanarp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\termdd.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rdbss.sys
  Loaded driver \SystemRoot\system32\drivers\nsiproxy.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mssmbios.sys
  Loaded driver \SystemRoot\System32\drivers\discache.sys
  Loaded driver \SystemRoot\System32\Drivers\dfsc.sys
  Loaded driver \SystemRoot\system32\DRIVERS\blbdrive.sys
  Driver loaded \SystemRoot\System32\Drivers\aswSP.SYS
  Loaded driver \SystemRoot\system32\DRIVERS\tunnel.sys
  Loaded driver \SystemRoot\system32\DRIVERS\intelppm.sys
  Loaded driver \SystemRoot\System32\drivers\dxgkrnl.sys
  Loaded driver \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Loaded driver \SystemRoot\system32\DRIVERS\HDAudBus.sys
  Loaded driver \SystemRoot\system32\DRIVERS\Rt64win7.sys
  Loaded driver \SystemRoot\system32\DRIVERS\usbuhci.sys
  Loaded driver \SystemRoot\system32\DRIVERS\usbehci.sys
  Loaded driver \SystemRoot\system32\DRIVERS\parport.sys
  Loaded driver \SystemRoot\system32\DRIVERS\i8042prt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\kbdclass.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mouclass.sys
  Loaded driver \SystemRoot\system32\DRIVERS\serenum.sys
  Loaded driver \SystemRoot\System32\Drivers\GEARAspiWDM.sys
  Loaded driver \SystemRoot\system32\DRIVERS\CompositeBus.sys
  Loaded driver \SystemRoot\System32\Drivers\RootMdm.sys
  Loaded driver \SystemRoot\system32\drivers\modem.sys
  Loaded driver \SystemRoot\system32\DRIVERS\AgileVpn.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rasl2tp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ndistapi.sys
  Loaded driver \SystemRoot\system32\DRIVERS\ndiswan.sys
  Loaded driver \SystemRoot\system32\DRIVERS\raspppoe.sys
  Loaded driver \SystemRoot\system32\DRIVERS\raspptp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rassstp.sys
  Loaded driver \SystemRoot\system32\DRIVERS\RimSerial_AMD64.sys
  Loaded driver \SystemRoot\system32\DRIVERS\swenum.sys
  Loaded driver \SystemRoot\system32\DRIVERS\umbus.sys
  Did not load driver \SystemRoot\System32\drivers\vga.sys
  Loaded driver \SystemRoot\system32\DRIVERS\usbhub.sys
  Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
  Loaded driver \SystemRoot\system32\drivers\RTKVHD64.sys
  Loaded driver \SystemRoot\system32\drivers\ksthunk.sys
  Loaded driver \SystemRoot\system32\DRIVERS\monitor.sys
  Loaded driver \SystemRoot\system32\drivers\luafv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\aswMonFlt.sys
  Loaded driver \SystemRoot\system32\DRIVERS\aswFsBlk.sys
  Loaded driver \SystemRoot\system32\drivers\WudfPf.sys
  Loaded driver \SystemRoot\system32\DRIVERS\irda.sys
  Loaded driver \SystemRoot\system32\DRIVERS\lltdio.sys
  Loaded driver \SystemRoot\system32\DRIVERS\rspndr.sys
  Loaded driver \SystemRoot\system32\drivers\HTTP.sys
  Loaded driver \SystemRoot\system32\DRIVERS\bowser.sys
  Loaded driver \SystemRoot\System32\drivers\mpsdrv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb10.sys
  Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb20.sys
  Loaded driver \SystemRoot\system32\drivers\peauth.sys
  Loaded driver \SystemRoot\System32\Drivers\secdrv. SYS
  Loaded driver \SystemRoot\System32\DRIVERS\srvnet.sys
  Loaded driver \SystemRoot\System32\drivers\tcpipreg.sys
  Loaded driver \SystemRoot\System32\DRIVERS\srv2.sys
  Loaded driver \SystemRoot\System32\DRIVERS\srv.sys
  Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
  Loaded driver \SystemRoot\system32\DRIVERS\asyncmac.sys

  OK a 2 TB disk format seems to cure the problem, or really a partial format because I got bored with the format after 6 hours as she possessed only at 3%, so I canceled and then quick formatting. Spin checkdisk on it now.

  Boot times are back to void / 1 min. Hooray!

  Incidentally. Once I have re-installed the keyboard and mouse wireless MS, sneaky win 7 is gone and automatically downloaded driver USB again of him is own agreement. Well.

  Thanks for your help,

  Jamie.

• Windows Disk Manager XP SP3 sees no no new hard drive

  I added a new slave SATA drive.
  The BIOS recognizes the drive.

  Connected to the computer as the local administrator.
  Manager displays the drive.
  Windows Explorer shows the drive.  When I click on the drive, the system responds with "access denied."

  Question: The Windows DISK management does not display the drive.  That's why I'm unable to format the drive.  Help!

  I swapped the drives and tried another new hard drive.  Still having the same problem.  Is there a registry setting?  or something that prevents this?

  The BIOS must be set to SATA or RAID. Default settings don't

  include both, generally, in "Advanced chipset" nec IDE SATA &, if cela of

  the case. If nec either and have the xp installation cd, boot the pc on a cd, press F6

  key when you are prompted, install floppy SATA/RAID (provided by mfg or get to the controller)

  MFG web site), choose the setting, auto racing, reinstall, select setting, let it run, then press

  Enter the key, on the menu for the xp cd, press r for recovery console, select 1 for C: press on enter

  password, type: DISKPART DISKPART in DiskPART, select new SATA hd, create a partition,

  Press the key type, ESC: /NTFS D: (D: being hd SATA), once its format thru:

  OUTPUT

  Let xp boot, open diskmgmt.msc in msc, new L.click hd, take action, all, select

  'activate', close msc.

  In addition, the disk must be a MS-DOS floppy disk format, then install the SATA/RAID

  free software...

• HPM9265: HPM9265 AHCI support for SSD

  Y at - it a reliable update for the 'Intel Matrix Storage manager Option ROM v 7.6.6.1002 ICH9R' which will allow my SSD running with AHCI?

  You are the very welcome.

  Trim is not supported in your PC, as it is.

  Unfortunately, I do not know what the consequences are for not having not TRIM support.

  I cannot say if adding a third party sata controller would be better than what you have now.

  There are several different cards to choose from, but which is the right one for the scenario that you are?

  I have seen that some say 'support for SSD.

  Who didn't tell me much.

  Some people say that the PCIe x 1 slot slows down the drive.  Others say it's faster.

• NMH305 cannot start Media Server

  I just bought a NMH305 and have updated the firmware to 3.18.4. I implemented such that provided and all right and the Media Server worked and could be detected by the media players on my local network. I then added a second 500gig SATA drive and it was quickly recognized. I put the linear Raid 2 configuration (for a total of 930gigs). I was able to move files on the disk configuration and everything seems OK.

  However I'm unable to activate the Configuration Server / media to on. When I click on activate the media server small pop - up appears, but the options to "Find media shared on my network" is grayed out. If I then click 'Submit' nothing happens for a few moments and then upcomes another popup saying ' Media Server is disabled. GoTo settings/Services to enable your media server... "

  I can enable and disable the itunes, ftp and other options in the page configuration, one Server - the only Media that interests me really wont one more.

  Can anyone offer any help?  Thank you very much

  Thank you, Wilins377, that did the trick. The machine has reset itself to factory firmware, and my files are all intact. I can now update the sile system and the media server is running. The system is asking me to upgrade the firmware later, but since everything seems OK, I'm inclined to leave well alone.

  Thanks again.

• Error code 19 IDE CD-ROM drives BUT NOT USB CD-ROM

  I tried all the solutions online that I can find - uninstall the drivers, removed the CD rebooted and reinstalled and rebooted... no matter what I try, I can't shoot to work. I honestly don't remember what might have changed since I use often (family system). The system is entirely up-to-date via Windows Update of Windows XP. It's a DELL 4700. Since the purchase, I had to wipe/reinstall with non OEM XP, due to a virus problem at the beginning. I have a 2 to 4 GB upgrade memory. I added a second internal SATA drive. Recently, I installed an external USB on optical drive EZ-writer-it works very well. I would be grateful for any guidance for rethinking the role of the registry or to debug the original disks. Kind regards...

  Hello

  Run auto Locksmiths and verify.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Look for a red or yellow bangs in Device Manager and send back the same.
  Reference:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_dev_mgr.mspx?mfr=true
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

  May you enjoy a look at the article below.
  http://support.Microsoft.com/kb/310123

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Copying files vmdk, checksums do not match

  I'm under esxi 4 currently, and I'm going to migrate my vitrual servers into an esxi box 5. I added a stand alone SATA Server esxi 4. I stop the virtual server and copy the files from the old data store (a raid 5 array) on stand alone drive (data store). The virtual server has several readers and I so 4 vmdk files to copy. Initially, I copied the vmdk files using the data store Navigator. Once the copy is complete, I used the md5sum command to verify the integrity of the copy from the original and the checksums do not match. I then attempted to use the CLI and issued the-i vmkfs command to copy the files individually (one at a time). Yet once checksums do not match. The size of the blocks on the two data stores is the same (4 MB), so I'm not sure why my checksums do not match after copying. Is this normal? The server has no snapshots etc.

  I used this link for the correct procedure-

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 900

  It might be possible that there is bit errors that occur during the copy.  I've seen this happen even with high end RAID controllers usually get fixed with firmware updates.  You can check if there are updates for your controller.

  To find out if you have bit errors, try the following:

  Make a copy of the chart on the single disc and check the md5 on the single disc.  He notes down.  Make a second copy (probably the same) of the table on the single disc and check the md5 second on the single disc.  If the two s md5 on the match single disc, then there is something in the copy mechanism that is edit the files slightly and causing a different md5 of the original on the table.  If they do not match, then it is likely you have found errors of bit of the controller.

• Need hardware for VMware ESX5

  I'm a beginner to VMware, I wanted to install Wmware ESX5 on my laptop to practice for my review. Please someone guid me the procedure for the same thing.

  Thanks in advance,

  Concerning

  Samy

  Your laptop will probably work if it is fairly new, but then you lose the ability to run Windows directly on the hardware of your laptop. If you choose to use your laptop computer, back up the data on computer portable th. and burn the iso image fo ESX 5 on the disc.  Then put the ESX disk in your laptop and boot.  You will blow out Windows in the process, but you might have an ESX Server, when you are finished.  I say maybe because VMWare does not directly support laptops.

  Since you said that you were studying at the review, I recommend that you buy a dedicated VM server.  You can then install vSphere client on your laptop and have access to your dedicated server.

  If your budget allows, pick up a Dell PowerEdge 1950 off ebay for around $200.  Put at least 16 GB of memory in it.  I added a 1 TB SATA hard drive to mine.  Other brands of servers also works, but the PE of Dell 1950 was the least expensive way (that would go ESXi 5.0) I found to go about this when I started studying for my VCP.  HP works well too, but then you enter generation specifiic questions... for example, DL380 G3 wont 5.0 ESX but a DL380 G7 desire.  They are always the same machine, but different versions.  It becomes confusing.  That's why I stuck with Dell.

  I now ESXi 5.0 is installed on the hardware, and then inside that I'm running (2) ESX 4.0 servers and a Windows 2008 Server for vSphere.

• Dell XPS 410 memory capacity

  Hello

  I have a XPS 410 aging badly need of an overhaul.  It is a great machine that I have maintained quite well for the past nine years.  Currently, it has 3 GB of RAM installed (1 x 2 GB and 512 MB x 2), but I wanted to start with the RAM upgrade.

  The motherboard has been replaced 2 years ago, and the person who repaired told me that it would be useful to simply upgrade of components if I have the skill.  When it was sold in 2005/2006 he says he has a maximum capacity of 4 GB RAM, but I've seen many posts (which are a few years, btw) it could contain 8 GB (4x2Go RAM modules.  I was wondering if it can be improved to 12 GB (4 x 2 + 2 x 2) or even 16 GB also (4 x 4 GB).  I guess it comes down to, you can install a 4 GB RAM module? or is too high to 2 GB?

  Intend to do a small upgrade RAM, adding SSD or readers, another small upgrade RAM, replacement of processors and perhaps eventually adding a map interface SATA if it would be beneficial.  In the end, the only original thing to this device would be the card reader, network card and the case!  Thank you for any advice you can give me.

  You can not go to 16 gig.  8 GB is possible but only with compatible non buffered non ecc non registered Ram of LOW density.   DDR2 is dead or missing since the retail channel.  If you get a Precision T3500 opportunity that uses DDR3, you're more likely to keep it for a few years.  The max ram is the same precision 380 or XPS400.  You have 4 slots, 4 x 2 gig is possible as well as 4 x 1 gig.  You can find a T3400 precision with 4 GB or more of ram is the same as the cost of 8 GB of ram only.

  http://www.eBay.com/Sch/i.html?_nkw=Dell+T3400

• Configuration of the bios/add another SATA drive

  I just added a 500 GB Sata Drive in my Dell8300. I cloned it with the info of the Sata 120 GB drive came with the system.

  I left the orig. cable/HDD attached as he was to the Mboard and plugged the new drive in the free sata connection.

  When I go into the bios, the only way I can get the new boot disk is to turn off the device of the orig. If this isn't the case, it will boot to the old drive.

  I guess I have to swap the cables on the sata connector of Mboard for him to start again disc? Or, can I I put in place in the Bios to do? (I tried, but in vain)

  Also, when I get it started properly, how can I do to get Windows XP to show both drives in Explorer? At present, if I have two drives is enabled in the bios, it will start on the old disk, but not to show new disc in Explorer...

  Just a guess here, but I wonder if, because the old drive has been cloned on the new drive, I have to rename the drive letters to get to show?

  Motherboard is Dell 0W2562 and BIOS: Dell Computer Corporation A03 19/09/2003

  TIA

  J