Adobe InDesign CC 2015 - program has stopped working
After you apply the updates on CC in 2015 the customer Cloud Creative yesterday, Adobe InDesign 2015 requests no longer works. He launched the splash screen, and a few seconds later, an error message indicates the following:
The Windows Event Viewer displays the following text:
I tried to uninstall and reinstall the application restarts in the meantime and cleaning directories of InDesign, I could find. I completely uninstalled, rebooted and reinstalled the VC Redist on the MSVCR120. DLL file. Ran SFC/scannow as well. InDesign CC 2014 works very well. No other application 2015 CC has any questions.
OS: Windows 7 Enterprise 64-bit Edition SP1
Any help on this would be greatly appreciated. Thank you.
It is the incorrect permission on preferences, probable cases. See replace your preferences for path.
Most of the time if fixing permissions does not work (user and system with total control), copy files to a user to work will work. Just be sure to remove or rename the wrong files first because you have to replace the entire file, not to merge a new.
Tags: InDesign
Similar Questions
-
When I open photoshop and then I click on new and I press ok and then he said: this message? Adobe Photoshop CC 2015.5 has stopped working.
You are able to access the preferences? (Edition > Preferences (PC) - Photoshop > Preferences (Mac))
If so, in the general tab, click Reset preferences on exit, then close and relaunch Photoshop.
-
Adobe Photoshop CC 2015.5 has stopped working!
Hi friends
I need to help you!
Open Photoshop ok!
Open the file and after > > Adobe Photoshop CC 2015.5 has stopped working!
Windows 7 edition update
HP = updated graphics = ATI Radeon 6770
I have tried opening run as administrator. Not
Malware. Not
Thanks and greetings
Claudio
Hi HAL,.
The failed module name: LavasoftTcpService64.dl
Please see the article P Digital.Anarchy.backdrop.Designer.v1.1.for.adobe.p crashes with Lavasoft Chrome installed extension below
Kind regards
Assani
-
Adobe PremierePro CC 2015.1 has stopped working
First execution of Adobe first Pro CC 2015.1 translates into an error message "the application could not start properly (0xc000001d). Click OK to close the applictation.
The details of the problem are:
Signature of the problem:
Problem event name: APPCRASH
Name of the application: Adobe first Pro.exe
Application version: 9.1.0.174
Application timestamp: 564dce25
Fault Module name: DNxHR.dll
Fault Module Version: 2.1.0.9
Timestamp of Module error: 55352343
Exception code: c000001d
Exception offset: 000000000000f4c9
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 4105
Additional information 1: b14f
More information 2: b14f0bb255ff1fda75b2218f14e23e1b
3 more information: 1a8d
Additional information 4: 1a8d695bd80513a1d5d2f39f3606178d.
It is difficult to evaluate the software if it does not work in the trial version.
Any ideas beyond stopping and restarting CC?
You can also check out link below:
-
Photoshop CC 2015.5 has stopped working error
When I try from PS I get the message "Adobe Photoshop CC 2015.5 has stopped working" no other information or number error message is presented.
Yesterday, I upgraded to Windows Pro 10 for updates later, all the CC app to the latest version and update of Norton anti-virus and PS has worked all day.
Today (24/09/16) I had to update Norton AntiVirus with an update that requires a restart. I don't know if it's related to Norton (I don't) and I now GET the message that it has stopped working.
I took the measures following, based on suggestions from the forum
-re-installed PS
-disabled graphics card
-run cccleaner.exe
s ' install sniffer.exe desktop
-rebooted PC many times.
-ran creative cloud as an administrator
-Rename the file librarylookup
-tried to start in safe mode with network
-connected with the new user account
Any of these would start the PS eventually. Any suggestions?
Have you tried disabling Norton?
Go to the Windows search bar and type "Reliability monitor" and choose "view reliability history" (control of configuration\systeme and Security\Security and Maintenance\Reliability monitor). Find the most recent crash of Photoshop, then choose "show technical details." Copy and paste the report here in its entirety.
-
Adobe flash player 11.4r402 has stopped working.
Original title: soundcards will close the program.
I get this message. Adobe flash player 11.4r402 has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify if the solution is available
Hello
This can help you:
Download and run the Flash Player uninstaller program.
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:
http://get.Adobe.com/flashplayer/?promoid=BUIGP
If the problem persists, you may want to ask in the Forums of community Flash Player:
http://forums.Adobe.com/community/flashplayer
See you soon.
-
Adobe first Pro CC2014 20141 has stopped working
Whenever I try to launch the program this message 'Adobe Premiere Pro CC 20141 has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is not available"I tried to uninstall and re install the program like 2 or 3 times already, can't find anything on the Internet can help me either. Please if you have any suggestions made me know.
Here is a screenshot.
Hello
Can you please check if you have Service Pack 1 installed for Windows or not. My guess is that it is the first cause of crash.
Concerning
Dorin
-
I got a message from someone I know who included an attachment that did not open. When I tried to delete the message several times, the program has stopped working and when I reboot Mail message is still there. Any ideas?
Hello
1. What is the exact error message?
2 have you made any changes to the computer before the show?
3 What is this problem only occurs with email?
4. what service provider or of the E-mail client that you are using?
5. what version of windows are you using?
I suggest you to provide more information about the issue. -
Catalyst Control Center window will appear to indicate that the program has stopped working properly
Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.
Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx
Jim
-
"dsca.exe program has stopped working".
At startup I get an error message indicating "dsca.exe program has stopped working" how to fix this?
dsca.exe is a Dell program used with, it of the support center and is not necessary to run at startup. Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and download, install and run Autoruns. Pass the all tab. Check all the items until you find the one who mentions dsca.exe or appears related to Dell (check all the items in the list because there may be multiple entries). For each entry, uncheck the box to prevent it from start to start, and then click OK. Restart the message should be gone (and you not have lost all functionality to your system by doing this).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Original title: error message:
When I try to open one of my programs, I get an error message states that my program has stopped working, Windows is looking for a solution
Hi SheilaFrenchman,
· Are what program you referring?
· Did you do changes on the computer before the show?
· What is the full error message?
Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
-
Original title: notice of work stop Windows
Hi JoeBuono,
Follow the steps below:
Method 1:
Start your computer in a clean boot state and see if that fixes the problem.
See How to solve a problem by performing a boot in Windows Vista or in Windows 7
Note: Do not disable any program startup list Kodak when you perform the clean boot.
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
Uninstall and reinstall the Kodak Home Center of your computer and see if that fixes the problem.
See also: troubleshooting install or uninstall programs
Method 3:
See:
Message: "AiO Home Center has stopped working" when editing and printing photos
-
Yesterday I connected my laptop and when I tried oppening a program a window pops up say "program has stopped working". I opened the control panel to start the troubleshooting, and another appeared window "Control panel has stopped working". I tried to open microsoft word and another window popped up, it is true, that you guessed it "word has stopped working". Does anyone know why all of a sudden nothing works?
Hello
try a SafeMode system restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
PrintMaster "this program has stopped working".
I used PrintMaster12 for several years without problem. I don't use it often, the last time I used it may have been as early as last summer. When I tried to get into it recently I got the "this program has stopped working", Microsoft will notify you if a solution is found, the message.
Purchased PrintMaster 18 so I thought that it is perhaps a problem with an earlier version and has the same problem. There is urgency to solve what I need to access the files I have created in the program and printed and distributed in the coming days.
I tried a clean boot of Windows and turn off Data Execution Prevention, without change to the message that I get.
I would be very happy to get help to solve this issue. I installed a variety of small games BigFish downloads in the past year, but again, no other program that I can remember.
Details about the error in Event Viewer: "failing application pmw.exe, version 4.0.0.1011, time stamp 0x3c15e253, failed module mxdwdrv.dll, version 0.3.6002.18005, time stamp 0x49e0378e, exception 0xc0000005, fault offset 0 code 00071238, process id 0 x 780 x, start time of application 0x01cb172b3bbefe17.»
Brand and model of the printer?
Failed application pmw.exe - pmw is associated with PrintMaster from Broderbund Properties LLC
Therefore, uninstall PrintMaster completely.
Use Revouninstaller or Utility Windows Installer Cleanup if necessary to remove the traces of the program.
Reinstall PrintMaster in administrator mode (right click and run as admin)
Uninstall printer software/drivers and reinstall everything whole again.
-
I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
So I appreciate any help you can offer.
Hi luv2shop,.
This problem may occur because of the conflict by the present security software on the computer.
I suggest you try the following steps:
Step 1: Disable security software, follow the steps mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important: Activate security software once everything is done.
Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:
Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.
In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product
Description of the Windows Installer Cleanup utility
http://support.Microsoft.com/default.aspx/kb/290301
Step 3: Set the clean boot computer and try to install the program
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Important: n ' forget not the computer to start normal follow step 7 in the link.
If the problem persists, you can check with iolo for known problems
http://www.iolo.com/customercare/
Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Need to maintain the icon in line with end of line to write on behavior
Need to keep an icon that is aligned with the end of the line of movement 5 write on behavior I used speed custom behavior to write on to keep the time between specific waypoints proportionally compared to the times of real satellite data. However, I
-
How in the filter to extract the attachments?
I want to do the filter that will automatically extract attachments to the special folder (for example, c:\MyFolder).The program of "The bat" I can do it easily. But in Thunderbird, I can not find how do. Maybe there are some plugins? Best regards, R
-
Any help you can give me would be great.
-
Qosmio G40-108: bad quality video/DVD playback
I have new Qosmio G40 108 loaded with Vista Ultimate and am very disappointed with the quality of video/DVD playback compared to the older machines loaded with XP. Seems insipid depth bland, not really the color and not too strong. I tried another la
-
UK site does not mention the availability of BT
Hello. I have no particular problem but a general question. I read specifications of most mobile phones on the United Kingdom and Polish Web sites (cause I live in Poland) and I discovered that the site Polish Toshiba always tells whether or not a la