Adobe Premiere Pro CS5 - CPU

Similar Questions

• MOV files in Adobe Premiere Pro CS5 - XDCAM (MPEG) MPEG 1/2 (xdvc) resp.

  Description of the problem:

  I got a bunch of MOV files on a disk formatted HFS + for editing on Premiere Pro CS5 (5.0.3). When I import to Premiere, first said "Codec missing or unavailable. Paragon HFS + is used to manage the disk formatted HFS +. I copied the data to a disc formatted NTFS before use.

  Research, I gave the following indications:

  I tried to play in Quicktime and Quicktime said that I would need additional software to play the .mov file. But I could run the detective movie and it shows "XDCAM EX 1080i 50 (35 Mb/s VBR).

  VLC plays (!) and says it's a "video Mpeg 1/2 (xdvc)"

  MediaInfo said "MPEG video (XDCAM).

  The sound is PCM (L) according to inspector mov programs.

  The MPEG2 format seems to be supported by first (also in HD), forum entries tell me that I should be in version 5.0.2 as it Adobe supports the MOV container. So now my question: what am I missing?

  I have no idea on the camera used to film, but it could be a JVC, as it says that the JVC writes mov files.

  OK, let's go:

  1. Get an accumulation of static electricity of FFmpeg here: FFmpeg Windows builds of HawkEye. The 32-bit version is fine.
  2. Open the file from archive downloaded and go to the folder "bin"; ffmpeg.exe extract to a folder containing your SBDAs.
  3. Create a new text document in the folder with FFmpeg and the media, called 'mov2mp4.bat' files by making sure that you change the .txt extension to. bat.
  4. Open the text document and paste the following text:

     @ECHO OFF
     for %%a in (*.mov) do ffmpeg.exe -i "%%a" -vcodec copy -an -f mp4 "%%~na".mp4
     

  5. Save the document (even once, ensuring, it has a .bat extension), double-click it in the Explorer. The batch file runs and every MOV in the file processing and repackaging it in a MP4 container. It is lossless (there is no transcoding) and should go relatively quickly. Note that this is not also copy the audio, so you do not have the video files only. The resultant MP4s will perfectly be important in first.

  Let me know how it goes!

• How can I capture video on a dvd disk in Adobe Premiere Pro Cs5?

  Hello! I'm an amateur, I'm trying to restore a video on a vhs tape in first Pro Cs5.  I have Pinnacle Studio 14 Pro, Moviebox Plus USB hardware, Sony dvd player software and a Panasonic VCR.  I have captured vhs for Pinnacle Studio 14 Pro video and burned on a dvd.  I connected the Moviebox Plus to my computer via usb and connected at the entrance and exit for my Sony dvd player.  I opened the first Pro Cs5 and went to the file and clicked on the capture.  I push the game on dvd player and nothing happened in the capture window.   I noticed at the top of the window to capture were some info.  The news said: "the Capture device is in offline mode.   I went in first Pro Cs5 to edit and preferences.  I changed the brand of the Sony device and the Type of device to the standard.   So far, nothing has been captured.   I would like to know how I can solve this problem.  I know it's a lot of information, but it's the only way to assert my setup and what has been done.   Thank you.

  Gerald SR.

  The simple way is with the DVD in the optical drive of your computer, use Explorer to navigate to the Video_ts folder and you'll find the VOB file

  If you do not see the file extension highlight the folder and right click, select properties and in the Tools menu select options records then view uncheck Hide extensions of known file types.

  Then you will see the. VOB file extensions.

  Copy the large VOB on your hard drive then click on it and select Rename.

  Rename it. VOB to .mpg and use this file.

  There are some freeware VOB2MPG who does the same work but more easy.

  Regarding learning PP visit Web Creative Cow and it and are looking for video tutorials, there are a lot of beginner absolute in full on expert.

  Take advantage of PP

• 5.1 audio in Adobe Premiere Pro CS5

  I have a sequence (5.1 audio). I checked "Match sequence settings" in the "Export settings" window when I was at the exit of the final video. The problem is that in the "export settings", he says:

  1920 x 1080... etc...

  ...............

  48000 Hz, stereo

  STEREO? This means that I can NOT RELEASE A VIDEO WITH 5.1 AUDIO?

  If I can not really out there, then what preset should I choose? Or do I have to change a software? What of all the films under the direction of Premiere Pro?

  If I can, then why it says "Stereo"?

  Do I need some extensions?

  BTW, 5.1 audio in After Effects and Soundbooth?

  To export audio 5.1, you need the plugin Minnetonka Surcode. You have three tries before you need to buy it.

• Premiere Pro CS5 Production Suite: can only transcribe English?

  I have CS5 Production Suite in German language. Unfortunately, I see only an option transcribe in English

  schould I install an addon or how aktivate other languages? (I need German!)

  Thank you!

  Get them here:

  discourse analysis | Adobe Premiere Pro CS5

• Bass on Adobe Premiere Pro CPU utilization

  Hello

  I'm dealing with low CPU utilization on the export of videos with Adobe Premiere Pro. The use is between 40 and 50%. My equipment should not be the problem.

  Well... tells us a part of your question, is that your writing export is part of which slows things down. Note that when you write the file much smaller, which unless disk activity to do this, your CPU usage increases.

  Yes... you need several discs with your project better laid out. As suggested.

  Neil

• Why this happens in Adobe Premiere Pro 2015.3 cc?

  I hope someone can help me with this problem.

  I import a video green screen and I start making my adjustments in the effects of Ultra keying and when I adjust the choke and soften in the cleaning of the Matte, the preview screen becomes black. That's when I had the problem and I did it a couple of times and it always seems to start when I start to adjust the choke or soften. I still have sound, but it becomes black. The video of the project also becomes black when hovered over with the mouse.

  This is a new computer with Windows 10 Pro, the graphics card is Nvidia GeForce GTX 1080 with the latest version of the video driver 372.54, CPU is Intel Core i7 - 6900K and I have 64 GB of Ram. My monitor is a Viewsonic VP2780 - 4K, and the resolution is set to 4096 x 2160. I adjusted the display settings, but it made no difference, and so I'm not sure why it happens in Adobe Premiere. Here is a link to show what it does:

  Issue in Adobe Premiere Pro CC 2015

  There is no sound in the video, but it is to illustrate that the preview screen went black and when you move the videos in the projects, the videos are also black.

  Is there some settings that must be configured in Adobe Premiere Pro CC 2015.3 to prevent this? I use a Logitech mouse and a Logitech keyboard. They are also new. I am very surprised that I would still have a problem with Adobe Premiere, but I don't know if that's a problem with Windows 10 Pro, map video, monitor, or foregoing. Any help would be much appreciated. Sad to spend so much on a computer system nice and Adobe first does not work with the system.

  Thanks in advance for the help!

  Tim

  You can put in a report bug here!

  Feature request/Bug Report Form

• Adobe Premiere Pro CS6 funcionar dejo

  Hola, I hope someone can help me. MI first Pro CS6 without is abre desde hace unos dias, nor ingresar desde el icono en mi tratando barra tasks or open directly los proyectos tratando. El message are Adobe Premiere Pro CS6 funcionar dejo, eso is, me comenta una respond TR buscara Windows are y no me ha notificado nada. Are yo eliminate restore el programa, plots of Windows y nvidia, restore previo a las plots, problems of compatibility solucionador sistema y nada works. Lo mas reciente than I made previo a este problema con Adobe fue fornuis tarjeta grafica, ago that estaba tiendo problems of "pantalla azul" (watchdog) por no tener ultima version (eso are to various).

  Los datos mi equipo:

  P55 - A Satellite Toshiba laptop

  Intel Core i7-4700MQ CPU @ 2.40 GHz

  8 GB RAM

  8.1 Windows 64-bit x 64

  NVIDIA GeForce GT M 740 (version 362,00)

  Please, if someone can help me, is lo agradecere muchisimo.

  Hi Ingridt,

  Please see if there is an update available for video drivers:

  Drivers - Download NVIDIA drivers

  Check the logs of events from the Windows Event Viewer.

  Open event - Windows Help Viewer

  What are the information in event logs? (Event Viewer) - Windows help

  Thank you

  Ilyes Singh

• Adobe Premiere Pro CS6 has stopped working

  Please, I need help. My software does not work for a few days. I tried to uninstall and install Adobe Premiere Pro CS6, windows and updates from nvidia, System Restore, resolve compatibility issues, nothing works

  The Windows message do not specify the problem. I can't open my files or adobe first

  My laptop:

  P55 - A Satellite Toshiba

  Intel Core i7-4700MQ CPU @ 2.40 GHz

  8 GB RAM

  8.1 Windows 64-bit x 64

  NVIDIA GeForce GT M 740 (version 362,00)

  I don't know what to do

  Hi Ingridt,

  Please see if there is an update available for video drivers:

  Drivers - Download NVIDIA drivers

  Check the logs of events from the Windows Event Viewer.

  Open event - Windows Help Viewer

  What are the information in event logs? (Event Viewer) - Windows help

  Thank you

  Ilyes Singh

• Adobe Premiere Pro project transfer between Windows and Mac

  Currently, all my projects Adobe first Pro (CS5) published are published on a windows computer. If I buy Adobe Premiere Pro for my mac at home, it would be simple just copy the original project save file and my attention, audio, images etc. (from the windows software) on my mac fixed?

  Thank you very much

  Jazz

  Hi Jasmine,.

  The best way to make a backup of the entire project, including all automatic recording, project & media files is by using the "project manager" option inside the first.

  Learn how to use the project manager:

  1 adobe Premiere Pro help. Consolidate, transcode and projects archives

  2How to use Premiere Pro project manager: lynda.com tutorial - YouTube

  Kind regards

  Navdeep Pandey

• I get this message error - "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project".

  So I had [already] CS5 on my computer. I wanted to move to the new first Pro CC. So, until I did research on the passage, I just uninstall old Adobe all files my computer to ask a table open for my new download [first Pro CC].

  I am a beginner with the 30 day free trial, then initiate the payment once the trial is over. I did everything what I had to do to install the latest version of Adobe first Pro CC.

  Whenever I click the first Pro CC icon, it starts to launch upward, and about 5 seconds and it gives me the error "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project"and stops immediately...

  I have a 27-inch iMac [2014] new nice.

  I have enough memory and ram.

  What is causing this error? For more information on this would be greatly appreciated.

  

  -Justin

  I have resolvet

  Hi Jose,

  Seems that it crashes when GPU processing.

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which select "remove previews."

  Try these steps and see if it works.

  Kind regards

  Navdeep Pandey

• I just installed CC Adobe Premiere Pro and it crashes all the time!

  I just installed CC Adobe Premiere Pro and it crashes.  I tried to create a new project, open an existing project - nothing works.  I can start a new project and get as much as import clips in the project window, but at the time wherever I try to play a clip or create a sequence from it, it crashes.  I'm running off a new laptop (3rd generation Lenovo X 1 carbon) 8 GB of Ram, processor i5, best of everything I could get on this specific machine.  Any thoughts?

  The files that I open a new project are a gopro camera MP4 files.  The existing project was a CS5.5 file he tried to update to CC - in fact, he finds all the files fine and as soon as he arrives to the workspace with everything laid out, it crashes.  Let me know if I can provide more information.

  I contacted Adobe support and they helped to solve the problem!

  Apparently projects are set to use the Mercury playback engine by default if you need to disable this feature.

  Go to file > project settings > General.

  In the general tab change the video rendering and playback of 'accélération GPU (Open CL)' to ' Software Only '.

  This fixed the problem for me, even if I don't have to review a project widely.

  I hope this helps!

• How to properly configure a graphics card for SpeedGrade, Adobe Premiere Pro and After Effects?

  Okay, so I have the following system configuration:

  2 NVIDIA Geforce GTX 970 s

  5960 X CPU

  MSI X 99 game 7 motherboard

  32 GB DDR4 RAM

  256 GB and 1 TB Samsung 850 Pro SSD

  Basically, even if I have the whole system built together, I'm not sure how check and know whether or not Adobe Premiere Pro is in fact using the map graphic or not.  I know it has to be using some of them, otherwise it would not run correctly (as I discovered a recent experience).  However, I don't know if there is, perhaps, some settings in the NVIDIA Control Panel that must be configured so that Premiere Pro can use the card to its full potential.  Here's an example of what I'm talking about:

  

  In other words, they are (I'm sure) all of the default settings of the Control Panel applies to Premiere Pro.  However, I don't know if there are any parameters here that I should change or not.  So what I'm looking for an answer to this question:

  • What parameters, if any, should change for Premiere Pro (as well as other adobe applications that can use all the force of the 970 GTX)?
  • How can I check the GPU activity it is applied during rendering?  (For example, I can check with the Task Manager, CPU usage while I made to see that it is used at 100%).
  • If, perhaps, something goes wrong and even with the right settings, say that the card still is not fully used, what other settings can I change to ensure that the GTX 970 is fully used by Adobe first Pro/After effects/SpeedGrade CC 2014?

  If you want a reference point to measure the performance of Premiere Pro to your: drive system, GPU and CPU use our first Pro BenchMark (PPBM)

  When you finish running the test and then run the script, you will get this report

  

  In this case the result of my laptop (with a GTX 765 M GPU and SSD drives)

  1. The disk performance are explicit.
  2. Number 2 is a very complex timeline of seven layers with heavy assistance from CPU and GPU, without hardware acceleration GPU (processor only) should be longer than 1350 seconds.
  3. Three above is a measure of a chronology exaggerated using many, many GPU MPE accelerated effects and characteristics using a GPU to 99% of load (54 seconds above) and an export-only CPU of the same timeline (802 seconds).

  If you want to compare your results to others, that you need to register on the site PPBM7 to see the results.

  EDIT! I corrected the number 2 above originally, I said 900 seconds, but he was really longer than 1350 seconds

• Adobe Premiere Pro Crash CC

  System

  --------------------------------------------------------------------------------

  Manufacturer Hewlett-Packard

  Model HP Pavilion dv6 Notebook PC

  Total amount of system memory 8.00 GB RAM

  64-bit operating system type

  Processor Intel Core i7-3610QM CPU @ 2.30 GHz

  Number of processor cores 8

  OS version

  --------------------------------------------------------------------------------

  Windows 7 Home Premium SP1

  Graphics

  --------------------------------------------------------------------------------

  View the card type Intel(r) HD Graphics 4000 (version 9.18.13.3523 driver) / nVidia GT 650 M (335.23 driver version, after accident start updating 337.50)

  1920 x 1080 resolution main monitor

  DirectX version DirectX 10

  Network

  --------------------------------------------------------------------------------

  Network adapter Realtek PCIe GBE Family Controller

  Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n network adapter

  Premiere Pro Windows Journal

  --------------------------------------------------------------------------------

  Name of the failing application: Adobe first Pro.exe, version: 7.2.2.33, time stamp: 0x532c3999

  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24

  Exception code: 0xc0000374

  Offset: 0x00000000000c4102

  ID of the process failed: 0x4c8

  Start time of application vulnerabilities: 0x01cf63bb08698583

  The failing application path: C:\Program Files\Adobe\Adobe Premiere Pro CC\Adobe first Pro.exe

  The failed module path: C:\Windows\SYSTEM32\ntdll.dll

  Report ID: 80d6a886-cfae-11e3-a18d-a0b3cc46aee7

  --------------------------------------------------------------------------------

  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: Adobe Premiere Pro.exe

  P2: 7.2.2.33

  P3: 532this 3999

  P4: StackHash_8d32

  P5: 6.1.7601.18247

  P6: 521eaf24

  P7: c0000374

  P8: 00000000000c 4102

  P9:

  P10:

  Attached files:

  C:\Users\MV\AppData\Local\Temp\WERD1FE.tmp.WERInternalMetadata.XML

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Adobe first P_4bdfc3fcb77f3a49c355ba877951ede689fe99cb_03a8df37

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 1b054554-cfb3-11e3-96cb-a0b3cc46aee7

  State: 1

  --------------------------------------------------------------------------------

  < name of the provider = 'Error of Application' / >

  < qualifiers EventID = '0' > 1000 < / EventID >

  < niv.2 > < / level >

  < task > 100 < / task >

  < Keywords > 0 x 80000000000000 < / keywords >

  < TimeCreated SystemTime = "" 2014-04 - 29 T 14: 40:13.000000000Z "/ >"

  < EventRecordID > 12941 < / EventRecordID >

  Application of < channel > < / Channel >

  < computer > MV - NB < / computer >

  < security / >

  < / system >

  < EventData >

  < data > Adobe first Pro.exe < / data >

  < data > 7.2.2.33 < / data >

  < data > 532this 3999 < / data >

  ntdll.dll < data > < / data >

  < data > 6.1.7601.18247 < / data >

  < data > 521eaf24 < / data >

  c0000374 < data > < / data >

  < data > 00000000000c 4102 < / data >

  < data > 2394 < / data >

  < data > 01cf63b8adfad553 < / data >

  < data > C:\Program Files\Adobe\Adobe Premiere Pro CC\Adobe first Pro.exe < / data >

  C:\Windows\SYSTEM32\ntdll.dll < data > < / data >

  < data > 2ba83196-CFAC-11e3-a18d-a0b3cc46aee7 < / data >

  Plugins part 3

  --------------------------------------------------------------------------------

  Giant red universe - uninstalled

  Film

  Crash

  --------------------------------------------------------------------------------

  When I choose graphics nVidia only, the crash of the body at the start, when I try integrated, agency open but crash within minutes

  I already try to change Mercury Playback only software but keep the crash.

  Sorry for my bad English.

  I know this post is a little older, but maybe I can help someone else. Because I just had this problem! AND IT FIXED!

  This problem occurs when a file in system32 is broken or something like that

  After a lot of various other attempts, I replaced the file 'ntdll.dll' in 'C:\windows\system32 '.

  You can find this here filen: ntdll.dll download - DLL - files.com

  I wouldn't recommend to do in the first place. As a final option instead.

  I realized that it is actually older than the version I had and an update will probably replace him once again, but for now it works.

  And don't forget to make a backup of the old file, rename 'ntdll.dll - old' just

• Adobe Premiere Pro has not found capable video game modules...

  When I open Adobe first Pro CC I get this error message:

  "Adobe Premiere Pro can't find capable video game modules. Please update your video display drivers and start over. »

  I checked and my NVIDIA GPU is updated

  I build this computer from new components:

  CPU: Intel processor 3,4 GHz (with Intel HD Graphics)
  GPU: EVGA NVIDIA GeForce 650Ti BOOST (2 GB).

  RAM: 16GB DDR3 1333

  I tried to make sure the first uses only instead of Intel NVIDIA card, but it does not work. This could be the key to solve the problem. But I don't know how to do this.

  PS Please do not comment «I also have this problem...» "WITHOUT some kind of help. It does not help anyone. I noticed that this is a problem with the people of AMD GPU. BUT the help with NVIDIA.

  I HAVE NO IDEA WHY THIS WORKS, BUT IT THE FACT.

  I clicked "Properties" and then clicked on 'Compatibility' and under 'Compatibility Mode', I ticked the box: "run this program in compatibility mode for:"
  and choose 'Windows Server 2008 (Service Pack 1)'. He ran as administrator and it works. He freakin ' works...