Adobe Premiere Pro / timeline

Similar Questions

• How to add video effects to images in the timeline in Adobe Premiere Pro CS6?

  Hello

  Can anyone help me please with the following? I use Adobe Premiere Pro CS6, and I have a sequence of images which I imported it in video editing. I want to apply the effect 'Chained' to all the images, but I'm not able to add the effect to all images at once? I can do one at a time without problem, but it is of course very time consuming when it comes to the thousands of images.

  I've tried highlighting all and CTRL + C, CTRL + V with no luck. Any help would be appreciated, thank you very much.

  Before putting pictures on the timeline, use "Automate to sequence" with the cross dissolve as the default transition. Cross dissolve is not an effect, but a transition.

• Makes me nuts. Adobe Premiere Pro CC - Mp4 fine but Choppy in playback and export.

  It's driving me crazy. I can't find anything about my situation.

  I transfer all my VHS tapes & tapes Hi8 using Blackmagic Media Express. They fired to the mp4 format, but the sound was a little out of sync so I went to fix this in Adobe Premiere Pro CC because I'm adding titles in any case. The original mp4 file works perfectly. But when I import it into Adobe CC he plays rough AND when I export, the new ground thus plays file. I tried using a converter that makes the works, but the video does not look more good. This is my first post so I apologize if I lack info.

  I have a...

  Mac Pro (end 2013)

  Processor 3.5 GHz 6-Core Intel Xeon E5

  32 GB 1866 MHz DDR3 ECC memory

  Start drive Macintosh HD

  Graphics AMD over-pants D700 6144 MB

  Any help at all will be greatly appreciated. Thank you!

  The problem is obvious, as the sequence frame rate and the output is 14.985 when be 29.97

  I wonder if the mp4 clips captured with the good rate, but first he misinterpreted?

  MediaInfo is a free downloadable software that shows all the technical features of the file source video. First, right-click on a clip in the tray, and then select Properties - what does say for pace?

  Try this - open a new project, import your mp4 clips captured. Right-click and select change > interpret footage and if the pace is not 29.97, change it to 29.97

  Now click with right button and select new sequence of the Clip. Add the clip to the timeline and play, how is it? Check sequence > sequence settings and make sure it is 29.97, and the output should be as well.

  If you have already done a lot of editing and of course don't want to start over, try this. Make a copy of your project. Create a new sequence DV NTSC. Do the thing of frame rate change on source clips in bin. I think that you may be able to select multiple and modify several at a time. Go to the original sequence with published clips and do CTRL + A to select all, then CTRL-C to copy, then go to the sequence of NTSC DV you did and paste with Ctrl + V.

  If all goes well, he takes the work you have already done and make a beautiful sequence of 29.97, you can then export to 29.97 and everything is fine!

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Adobe Premiere Pro CC - Visual works, no audio with MOV

  Help, please!

  I have a clip on the timeline that the signal is not triggered, but the Visual works.

  The file is a MOV and appears gray, not blue like other clips.

  This is my first time working with Adobe Premiere Pro CC, so I'm a novice at this program, but not video editing.

  All suggestions are welcome!

  Is there a work around?

  Thank you!

  JANNET

  

  Hi Jacob,

  You have not inserted the audio for this element.

  Click A1 as V1 is highlighted (in blue) once done drag the audio on the timeline and check.

  

  Vinay

• Audio playback altered in Adobe Premiere Pro CC2014Sequence

  We started the Assembly of a draft standard CC2014 - we work with the cloud and all our software are up-to-date Adobe said CC

  The project implemented to the point - we've added an audio track - all played back fine.

  As we finished the project we have had to add a second layer of audio as the last piece will be narrated by 2 narrators one until the customer decides who will read what to keep two audio in the timeline panel, and disable the file on the right. (We did this in the past without problem projects.)

  That's where the problems are developed - poltergeist any as re-read us the sequence we hear various audio ghosts (for lack of a technical term) as - hear us the audio stops playing below at a lower level and distortion - but even more strange - audio playing under another part of the timeline is - so if I turned on the file below , I could now hear 3 track audio playback - 2 turned on and to place and one 3rd-audio lower flat and distorted.

  Troubleshooting steps so far:

  I think that hmm... perhaps it is an audio or a 3rd party software problem - I did so to disable all my audio playback software and send the audio to the desktop - problem still there

  I think hmm... maybe it's a corrupted file - so I open a new project file and import the sequence - problem still there.

  I think that hmm... the second audio is maybe a problem - so I delate all the sound elements to add - a single layer of the audio in the project - now the problem there re-routed self to give me the same problems, but always using the audio line in the sequence.

  I think hmm... maybe it's a problem or a question of platform - I played this sequence back on 3 different computers, ranging from OS 10.8, 10.9 to 10.10

  Some with and without 3rd party software. -problem still there

  After 45 minutes on hold with Adobe - they agreed it needs to be examined by a specialist software - connect and chat - they ask to connect to the desktop - and unfortunately we are disconnected - no call back as of yet.

  Anyone with ideas - I've heard of and seen a lot of problems with 3rd party but I trust, I ruled that - I too confident that this isn't a platform or a conflict of OS.

  It really looks like a corrupted file or a bug in the software.

  Audio files are a standard .mov file is saved with Adobe Premiere Pro 2014 CC capture mode.

  Video files are nothing out of the norm for us - variety of photos, graphics, videos, assembled in a deliciously funny and wonderful way.  Wish just that we could get the audio to work.

  Hi valeriav80637310,

  Welcome to the Adobe forums. We regret the inconvenience that you are currently experiencing with Premiere Pro.

  Please try these steps and let us know if it works:

  1. go in the preferences > media and clean the cache and re - open first to check on the issue.

  2. create a new sequence of a clip that you used in the project by right-clicking and selecting 'new sequence of the clip.

  -erase the media in the new sequence

  -Copy all the files from the original sequence and paste them into the new sequence

  Check on the issue and please let us know more communication.

  Concerning

  Anand Sachan

• Sorry, that a serious error has occurred which requires Adobe Premiere Pro stop. We will try to save your current project.

  Whenever I have put a video in the timeline of the sequence, this error message appears, "Sorry, a mistake that requires Adobe Premiere Pro to stop. We will try to save your current project. "and then the first crashes.
  
  I tried to uninstall all of the products and then reinstalling, and the problem is still there.

  What can I do to fix this?

  @RoninEdits, thanks for the reply.

  But yes, I have tried both the Mercury Playback Engine GPU acceleration AND software only and it is the same problem with both.

• How to properly configure a graphics card for SpeedGrade, Adobe Premiere Pro and After Effects?

  Okay, so I have the following system configuration:

  2 NVIDIA Geforce GTX 970 s

  5960 X CPU

  MSI X 99 game 7 motherboard

  32 GB DDR4 RAM

  256 GB and 1 TB Samsung 850 Pro SSD

  Basically, even if I have the whole system built together, I'm not sure how check and know whether or not Adobe Premiere Pro is in fact using the map graphic or not.  I know it has to be using some of them, otherwise it would not run correctly (as I discovered a recent experience).  However, I don't know if there is, perhaps, some settings in the NVIDIA Control Panel that must be configured so that Premiere Pro can use the card to its full potential.  Here's an example of what I'm talking about:

  

  In other words, they are (I'm sure) all of the default settings of the Control Panel applies to Premiere Pro.  However, I don't know if there are any parameters here that I should change or not.  So what I'm looking for an answer to this question:

  • What parameters, if any, should change for Premiere Pro (as well as other adobe applications that can use all the force of the 970 GTX)?
  • How can I check the GPU activity it is applied during rendering?  (For example, I can check with the Task Manager, CPU usage while I made to see that it is used at 100%).
  • If, perhaps, something goes wrong and even with the right settings, say that the card still is not fully used, what other settings can I change to ensure that the GTX 970 is fully used by Adobe first Pro/After effects/SpeedGrade CC 2014?

  If you want a reference point to measure the performance of Premiere Pro to your: drive system, GPU and CPU use our first Pro BenchMark (PPBM)

  When you finish running the test and then run the script, you will get this report

  

  In this case the result of my laptop (with a GTX 765 M GPU and SSD drives)

  1. The disk performance are explicit.
  2. Number 2 is a very complex timeline of seven layers with heavy assistance from CPU and GPU, without hardware acceleration GPU (processor only) should be longer than 1350 seconds.
  3. Three above is a measure of a chronology exaggerated using many, many GPU MPE accelerated effects and characteristics using a GPU to 99% of load (54 seconds above) and an export-only CPU of the same timeline (802 seconds).

  If you want to compare your results to others, that you need to register on the site PPBM7 to see the results.

  EDIT! I corrected the number 2 above originally, I said 900 seconds, but he was really longer than 1350 seconds

• Satellite A100-906 does not load Adobe Premiere Pro 1.5

  I installed Adobe Premiere Pro 1.5 in my notebook Toshiba A100-906.
  During the loading of the Adobe Premiere Pro 1.5 a blue screen appears and the system restarts.
  I guess that's a conflict with my sound card, but if this is the case, is a solution?

  Thnx in advance
  Novip

  PS. The Adobe Premiere 6.0 works very well

  Hello

  He s strange
  I searched on the site of Toshiba knowledge (you can it end to the title of the homepage of support) and found something useful
  I put t know if this Toshiba technical support document wants to help you but check this link.

  Running Adobe Premiere Elements 2.0 laptop freeze or crash
  http://support.toshiba-tro.de/KB0/TSB6401FS0007R01.htm

• 0xc000001d error occurs while open Adobe premiere pro application

  0xc000001d error occurs while open Adobe premiere pro application

  KB2999226 is listed in the installed updates?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You will find support for Adobe Premier Pro in this forum-online https://forums.adobe.com/community/premiere

• Is Adobe Premiere Pro download or cloud based only

  I work real estate with my wife and almost everything is cloud based but have questions about Adobe Premiere Pro. Is this program downloaded on my pc or should I sign online to access and download clips to create a video and make adjustments? I have dsl service and concerned about the fact that when we're on the whole line & or I lose my internet connection, I lose access to Premiere Pro. Sometimes, in our House, 3 of us may be onto something and he'll hang up or freeze. If I sign up and that's the case, I'm wasting my time. Can someone explain how this works? I use LR6 but I paid for the program and its on my pc so I do not understand how it works. There's a program that I use is called successive Animoto that is cloud-based, I connect, download videos or images and create my video. Its very time consuming downloading videos and images, if Adobe Premiere Pro is similar, I might have to rethink to use it. Thanks for all the assistance provided, hoping to get some answers... jp

  The software is entirely resident on your computer as long as you pay the monthly cost.  You don't have to be online to use it, but from time to time you have to connect.  I have a computer that is in my office who is not onllne except in very brief circumstances for a few minutes every few weeks.

• Why this happens in Adobe Premiere Pro 2015.3 cc?

  I hope someone can help me with this problem.

  I import a video green screen and I start making my adjustments in the effects of Ultra keying and when I adjust the choke and soften in the cleaning of the Matte, the preview screen becomes black. That's when I had the problem and I did it a couple of times and it always seems to start when I start to adjust the choke or soften. I still have sound, but it becomes black. The video of the project also becomes black when hovered over with the mouse.

  This is a new computer with Windows 10 Pro, the graphics card is Nvidia GeForce GTX 1080 with the latest version of the video driver 372.54, CPU is Intel Core i7 - 6900K and I have 64 GB of Ram. My monitor is a Viewsonic VP2780 - 4K, and the resolution is set to 4096 x 2160. I adjusted the display settings, but it made no difference, and so I'm not sure why it happens in Adobe Premiere. Here is a link to show what it does:

  Issue in Adobe Premiere Pro CC 2015

  There is no sound in the video, but it is to illustrate that the preview screen went black and when you move the videos in the projects, the videos are also black.

  Is there some settings that must be configured in Adobe Premiere Pro CC 2015.3 to prevent this? I use a Logitech mouse and a Logitech keyboard. They are also new. I am very surprised that I would still have a problem with Adobe Premiere, but I don't know if that's a problem with Windows 10 Pro, map video, monitor, or foregoing. Any help would be much appreciated. Sad to spend so much on a computer system nice and Adobe first does not work with the system.

  Thanks in advance for the help!

  Tim

  You can put in a report bug here!

  Feature request/Bug Report Form

• Bass on Adobe Premiere Pro CPU utilization

  Hello

  I'm dealing with low CPU utilization on the export of videos with Adobe Premiere Pro. The use is between 40 and 50%. My equipment should not be the problem.

  Well... tells us a part of your question, is that your writing export is part of which slows things down. Note that when you write the file much smaller, which unless disk activity to do this, your CPU usage increases.

  Yes... you need several discs with your project better laid out. As suggested.

  Neil

• GeForce 830M and Adobe Premiere Pro

  Hello. I'm a newb. The Nvidia Geforce 830 M (http://www.geforce.com/hardware/notebook-gpus/geforce-830m/specifications) is compatible with Adobe Premiere Pro?
  Because it is not listed here: https://helpx.adobe.com/premiere-pro/system-requirements.html
  
  But I've seen a Geforce GTX 650 TI works with Adobe Premiere Pro, and it is not too much.
  I have read that works in Adobe with CUDA and the 830M also works with CUDA.
  Thank you

  creation http://blogs.adobe.com/premiereprotraining/2011/02/CUDA-Mercury-playback-Engine-and-Adobe--pro.html

  If your nVidia card at least 1Gig ram video, it should work

• Can I edit 4 K images in Adobe Premiere Pro?

  Can I edit 4 K images in Adobe Premiere Pro? I am looking to buy a Sony A7s mk2 and I was wondering if it was possible to edit in the APP? Thanks in advance.

  Short answer: Yes.

• Hello! I am encouraged to uninstall Adobe Premiere Pro but ERROR: DW040 is displayed. What can I do? Thank you

  Hello! I am encouraged to uninstall Adobe Premiere Pro but ERROR: DW040 is displayed. What can I do? Thank you

  Reinstall the pre pro to restore your uninstall program.