ADS Instant HDTV PCI problem

Similar Questions

• ADS Instant HDTV PCI has a driver problem. Its used to play through the speakers of HDTV. Now he doesn't.

  I have a Sony VAIO laptop that I have previously connected to a TV high definition using the HDMI cable with success (sound and video broadcast by the TV).

  I use Windows Vista home edition.

  A few months ago, the noise ceased to play through the TV speakers.    I recently used a program of automatic correction of Microsoft and got the following error message: "ADS Instant HDTV PCI has a driver problem.  Can offer you a solution?  Thank you.

  Hello

  See the link below, he talks about the similar issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/audio-device-ads-instant-HDTV-PCI-cannot-start/00bb256f-cf91-44A3-8a66-733ad0a4cdfa?LC=1033

• Audio Device ADS Instant HDTV PCI cannot start (Code 10)

  I have a Toshiba computer installed with Windows Vista Home Basic and it worked well until 2 months ago. It was cracked sound coming out of my speakers and so I went before the restart. Yet, when I restarted, I saw a red cross next to the sound icon and the bottom of the screen (bar). I tried asking for help and made the instructions given by the assistance & > troubleshooting > tips for solving common audio problems > I hear sound from my computer. It did not work. I just shut down my computer to a disappointment, and when I turned it on again a few days later, it worked! And the next day it failed. Until he was operating and once on Board again. Until the day, don't worry too much. I restarted my computer will stay virtually from 20 to 30 times, until I really got to work. It worked a few days also. I failed. Sometimes, the Red Cross does not appear, and he showed that it was scientifically, but it was not. I couldn't increase the volume, or pull it down. He worked these last days until today, it hasn't made me very annoyed.

  Any advice?

  Hello i-Caramel,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Minitour dc5100 - installation nvidia geforce 6200 PCI - problem

  Hello
  
  I have an old HP Compaq DC5100 minitour, and I wanted to put in a graphics card instead of using the onboard gfx

  as windows kept alert me that I was running on system resources, and video memory.
  
  So after hunting around the net for a PCI card (PCI-e not that I do not have a slot on the motherboard for it)

  which are very few and far between, but I managed to find a Nvidia Geforce 6200 256 MB PCI card: Nvidia Geforce 6200
  That I jumped into one of the PCI free slots on the motherboard and has pulled up the PC... after a second fans
  closed and the PC started her off 4 short beeps (with a red light flashing in time with the beeps located under)

  the power button on the front of the pc), then stopped for a few seconds and then repeat the 4 short beeps.
  and then continued to do this until I turned off the machine.
  
  So I took then the video card back and put it in the second PCI slot, but the same thing happens again.

  Now, I had to take the graphics card and just plugged my monitor on the port of gfx on board.

  Does anyone know why this graphics card stop the pc to start?

  Or is there something I need to do to get it working?
  
  FOR INFO. I can't even get into the BIOS, so impossible to verify anything in there.

  Also, here is a picture of my motherboard and the two PCI ports:

  

  I had a quick glance for the beep codes but cannot determine what BIOS mine is in the list here:
  Beep codes HP

  The only information I could get from my pc has been;

  [Information BIOS]
  
   Provider string: Hewlett-Packard
  
  Version string: 786 2 v01.07
  
    Release date: 25/08/2005
  
        Size of the ROM: 512 KB
  
  [Information on motherboard]
  
    Manufacturer: Hewlett-Packard
  
  Product range: 09E0h
  
  Version string:
  
   Serial number: CZC6071MT0

  Good news!

  After taking all the USB devices on my machine and try again once I had no joy as it is the same with the 4 beeps and the PC shut down.

  So I headed upwards in my attic and after opening 3 old PC I got lucky and found an another PSU ATX which had the same dimensions and was a high-end with maximum capacity of 640 watts, so I it inverted and put the graphics card back in and connected USB devices , and then press the power button...... ..  .  This time there was no beep and the computer =)
  
  This is certainly the graphics card needed more energy than the 300 Watt who was originally in the machine.
  
  Thanks again for your help to solve this problem.
  
  Kind regards
  
  Mark

• HP Envy 4500: Instant ink cartridge problem

  I just registered to instant ink HP.

  All new Instant cartridges have been installed on January 28, 2015, I printed just 2 pages.

  I turned on at the time of the printer and the message on the screen says:

  

  I followed by using the line, contacted HP cat, cannot get assistance UK on phone, cleaned the contacts of the printhead as suggested on the help section of the software, removed and re inserted the cartridge approximately half a dozen times but still no joy.

  Instant ink cartridges are installed:

   

  After sending an e-mail to HP ink I asked a new cartridge.

  What is likely to happen or is there anything else I can do?

  Any help would be appreciated.

  Hi @scifijunky73

  Welcome to the Forums of HP's Support. I understand that you are having problems with one of the instant ink cartridges you have.

  My recommendation is to contact HP customer care on 0207 660 0596 (indicating your call is on the program of instant ink) Monday - Friday 08:30-18:00 (except holidays). It is best that you contact team of instant ink for your cartridge problem.

  Please let me know if you are unable to contact the team of instant ink.

• Instant Client connection problem - Excel 2007 for Oracle 10 g

  Dear users,
  
  I want help to connect Excel to Oracle.
  I use Excel 2007 (32-bit) on Windows Vista Enterprise 64-bit. I want to connect to a database 10g to Oracle through our local network using ODBC. I need to retrieve data once in an excel sheet.
  There is no firewall or connection between my current computer problems, problems as I can connect to my machine, using SQL developer as a local client to the Oracle database that is located on another machine on the network.
  I tried to make an ODBC connection, but Oracle is not listed as a driver.
  In my view, what ODBC is the best way to do it, but please correct me if I'm wrong.
  
  It is an Oracle 10 G database.
  I downloaded instantclient-basiclite - 64 - 11.2.0.2.0.zip a windows.x
  I also downloaded the additional ODBC components: * Instant Client Package - ODBC: extra to allow ODBC applications libraries.
  
  I unzipped in a folder called C:\instantclient_11_2
  The system path include one. I checked after reboot.
  I placed my tnsnames.ora (that I copied from the server) in this folder.
  I got it from the server: D:\Oracle\Ora10gR2DB\network\admin\tnsnames.ora
  
  I ran the exe "odbc_install" and he told me that the ODBC has been successfully intalled.
  
  When I went to the Control Panel, administrative tools, ODBC
  
  On the user dsn tab
  
  I added a new entry. I chose the Oracle driver (previously it was not in the list)
  
  Use the following values
  
  Data Source name: OracleL
  123 description
  The TNS Service name: I chose for my prod environment drop-down list. (There are two entrances with the name of the production, one uppercase and one lowercase)
  
  
  UserID: my user name
  
  I tried the connection Test and got this:
  
  Unable to connect
  
  SQlState = S1000
  [Oracle] [ODBC] [Ora] ORA-12545: Connect failed because target host or object does not exist
  
  
  Any suggestions please.
  
  Thnaks in advance.
  
  
  A.
  
  
  
  
  
  
  
  
  
  
  
  Thanks for all your help in advance.
  
  Akajohn.
  
  Published by: user12282521 on May 19, 2011 13:47

  user12282521 wrote:
  I want help to connect Excel to Oracle.

  I use Excel 2007 (32-bit)
  I downloaded instantclient-basiclite - 64 - 11.2.0.2.0.zip a windows.x

  If Excel is 32-bit (2007a) and the Oracle client libraries are 64-bit, it will not work. needs 32-bit 32-bit.
  You should probably remove current ic packages and get the 32-bit instead.
  Start over.

  When I went to the Control Panel, administrative tools, ODBC

  On Windows x 64, to run the 32 - bit ODBC DSN/drivers, we need run the Windows\SysWoW64\odbcad32.exe tool.

• VMDK + instant cause performance problems?

  Can think VMDK w / snapshots causing problems of performance by any chance?

  I'm on vSphere 4.1 (esxi)

  vmchr1s wrote:

  Can think VMDK w / snapshots causing problems of performance by any chance?

  I'm on vSphere 4.1 (esxi)

  Yes and no.

  Let's say you have VM - 1.  VM-1-snp (snapshot)

  If you have a database running on a virtual machine, and you create a snapshot, the data is READ in VM - 1.vmdk and WRITES to VM - 1 - snp.vmdk but databases need an AREA of IO, so go back and fourth could cause a problem.

  Otherwise performance is not normally a problem with the shots... space is the issue, and the time to commit data is the biggest problem, because your discs/SAN will take a major during the snapshot delete / validate the data.

• Pavilion dv7-1135nr, Win 7 home premium 64-bit OS. I can't correct 2 peripheral problems in Device Manager

  1. ADS Instant HDTV PCI, error code 10, I upgraded vista to win7 recently and reinstalled the drivers of HP technical support web. Are these proposed pilots accurate? I have installed TV tuner.

  HP has drivers for a TV for this model or a USB tuner or tuner Expresscard.

  More that likely that the driver Vista are not compatible with Windows 7 and HP does not offer any for W7.

• HDTV tuner card instant ads with a code 10

  I have windows vista Home premium package with media center. I did a full charge of vista and for some reason any I can no longer watch TV in windows media center. in Device Manager there is a yellow exclaimation point next to the map of pci ADS instant hdtv. I tried updating the driver and uninstall and reinstallation of the tuner, but nothing works. I keep getting a CODE 10 error, cannot start. I tried same physcaly withdrawal of the card and starting the computer and then put it back. NOTHING HAS WORKED, AND NO ONE SEEMS TO HAVE AN ANSWER FOR IT! Help, please!

  Hello.  I'll explain how I solved this problem.  I recognize that this may be different, but who knows.  I'm running on Vista x 64 premium.  I had the same exact error you described on the exact piece of material.  The part that can be different, is that I know what caused my hardware to stop working, I had turned off inadvertently.
  Here's how I fixed (I tried update driver, points of restoration system, uninstalling and reinstalling and kept receiving error code 10)

  1. go in Control Panel
  2. choose Classic view, and I chose "sound".
  3. I right click with my mouse when my devices are all listed and selected "show disabled devices" and "show disconnected devices"
  4. after that, my hardware reappeared and I allowed him and it works fine.

  I know that maybe it's not what happened to you, but I thought I'd try in case it was

  ~ J

• I lost the sound on my desktop PC I use windows vista, everything is properly connected

  I lost the sound on my PC at the beginning I had problems with the 9300GE Nividia G E Force which would not update & now I have a message that there is a problem with the ADS Instant HDTV PC1 driver?

  Check the easy things first.
  The sound is muted?  :)
  Is the volume up?  :)
  Can you do a system restore to a point where the sound is working and then go from there?

  You can have a conflict between the pilots.

  I suggest going to Web sites of the sound and video card manufacturers and get the latest drivers for both components.  If the sound is integrated on the motherboard you can obtain this driver from the manufacturer of PC as Dell or HP or the manufacturer of the motherboard if it is a homebuilt machine.
  That's all that I can say without more details.

• Satellite L35 (US) with Atheros AR5005G wireless connection problems

  I have a Toshiba L35 (Windows Media Center Operating System) with the software WiFi Atheros AR5005G. This machine was purchased in the United States.

  While in the United States the Wi - FI connection to a router (Linksys) using Windows to configure was instant without any problem.

  I am now in England and when I try to connect to a Modem/Router (3 com), use Windows to configure, connection is spasmodic with what makes a connection on every five attempts. Several times I have to use the repair connection device trying to connect. When it connects the connection is good. When you use the repair it shows unable to renew your IP address if it connects. On other occasions, I use the network connection Panel and 'disable' then 'activate' then most guarantees a connection.

  The laptop provides instant connection when you use a card PCMCIA WiFi with Windows to configure. While the card is inserted the s computer WiFi connect instant however when the card is removed and the computer restarted the same problems occur for a computer, free WiFi!

  Other laptops have no problems to connect to my Modem/Router. I am convinced that it is working properly.

  All regional/language settings in the control panel have been updated with the United Kingdom.

  No undates are available for the Atheros Driver or BIOS.

  Anyone can help identify the problem/possible settings to change?

  Hello

  Satellite L35 is a portable American designed for the American market. BIOS and drivers should be downloaded from the Toshiba site we and not on Toshiba Europe site.

  However, the error message Impossible to renew your IP address is known to me and my brother had the same problem with the Intel card. I just updated the WLan driver and used the Intel Proset utility for WLan configuration.

  I see that you have the Atheros card. The Atheros also provide an Atheros WLan client utility. Try to use instead of the clean Windows configuration.
  In addition, place check WLan card properties. You will find energy saving option. Please turn it off and check the Advanced tab

• Office Jet 4630: Instant ink

  I plan to sign up to page 50 per month plan. My question: what constitutes a printed page?  In others, if I print 10 pages each page consisting in 2-3 lines only, this is '10 printed pages'?

  Hello

  He has no lines or characters, there are line pages so 1 or 100 lines in a single page counted as one page.

  http://m.HP.com/UK/en/ads/instant-ink/FAQs.html

  http://support.HP.com/us-en/product/HP-cloud-services-ink-subscriptions-series/5264756/model/5401249/document/c03917913/

  http://support.HP.com/us-en/document/c03767640

  Kind regards.

• BlackBerry 10 problems with quick keyboard input?

  Curious to know if the owners non - Q10 this experience? If you do not have a Q10, try the following actions that stir up trouble (typing while receiving a text or BBM, message or by immediately typing affter hit send) and I would like to know if the behavior is not the same on the Q10?

  I type very fast on my keyboard of Q10. Often the time when entering text, say in a text message or conversation of BBM, I will hit enter to send and to start writing again. With any iPhone or Android, you would just keep typing. Half the time, I need to re - select the area to keep hits again, or he starts to enter a few characters are echoed to the screen and the unit freezes during a seecond and then the text box is empty, even if the phone works normally after that. Is it a known issue for BB10 lock up like that, and is the duty to select the text box again after sending the default behavior? I have not found a way to disable it and it is very annoying.

  P.S. I'm the only person who can manage almost never hit the X in the circle on the browser to clear the url? I have to remove most of the time...

  Solved... apparently WhatsApp is to blame. Found a tip in the classic BlackBerry users forum which could be related to a memory leak. Deleted and instantly all my problems were solved... hmm...

• Help, please. Start Windows7 very long.

  I recently got a new computer with a SSD 840 Samsung Pro, processor i5 3570 k, ASRock Z77 Extreme4 Mobo, Corsair Vengeance DDR3 1600 RAM; When I started windows 7, he ran fast and getting started fast. Now, after installing all the updates for the first time on this computer, it takes several minutes. The last time I started, I've timed it to 9 minutes. Once it starts, everything else on the SSD starts instantly, without a problem. So no problems with the SSD. This leads me to think, that he had something to do with updates for windows 7 that I just installed. All this took place in a single day, yesterday 02/03/2013. Please help to find an answer to the setting of my time for windows 7 starter.

  (USB) Universal Serial Bus controller
  PCI\VEN_1B21 & DEV_1042 & SUBSYS_10421849 & REV_00\4 & 37A73C8A & 0 & 00E7
  The drivers for this device are not installed.

  Install this driver - ASMedia USB 3.0 driver ver: 1.10.1.0
  http://www.ASRock.com/MB/overview.asp?cat=download&OS=Win764&model=Z77 Extreme4

  There is an update of the BIOS.

• instantink for 4500

  I just bought a printer from 4500 desire and wish to register to the instantink program. I have registered with HP, but then a page myself to connect with Snapfish. I do not have a password with Snapfish and the 'forgotten password' page keeps telling me I you will receive an email with a temporary password. This email never arrived (I tried 10 times). How can I get poassed this boring page? I don't want Snapfish. I just sign up for the instantink program. Any help will be appreciated!

  Hello videomen:

  Welcome to HP forum. Here is the link for the moment HP ink. http://www8.hp.com/us/en/ads/instant-ink/overview.html?jumpid=ps_r11400_us/en/special/IPG/_ps_b_instantink/InstantInkGeneric&k_clickid=AMS: 13 | 73943 | 2337b443-fe70-ab89-839b-00004ca231bb  You can buy a plain purchase. Yes, you save your printer with HP company that was for printers of one year, the warranty is required so that it can start the count down.

  I do not blame you for not wanting to break fish. HP has made a mess with almost all to all these updates HP Web sites. I don't understand not why you landed on the pages of Snap fish is a third-party site. If something you need to go to this link https://h30495.www3.hp.com/c/46372/US/en/?jumpid=in_R11549%2FSC&did=C410&from=h20563.www2.hp.com your printer has it as well. HP eprint center.

  Check your progams see fish Snap is listed and expand file see if he has enumerated Unistall. He maybe called HP Photo creation witch does not work any more it is I uninstalled. I think they went to Snap fish now. You will want to remove Internet Explorer setting any fish Snap add on or icons in the toolbar.  Have you tried using ink instant pasword and connection Snap fish log in page? Sites Web of some HP uses the same password and logins no matter where you register frrw in.