ADSaccount-> attribute manager UID_ADSAccountManager

Similar Questions

• Where are the attributes stored in the attribute Manager created?

  Hello

  I need to know where new attributes created by the Manager of the VSM 9.0 attribute is stored? In a table (we cannot find) or are there in the other "place"?

  Thank you very much.

  Attributes are stored in the HD_ATTRIBUTE table.

• Change post events for attribute Manager process

  Hello
  
  Can I trigger my piece of code in the post processing handler if one particular attribute is changed to IOM?
  
  Basically, I want to trigger e-mail notifications only when the user changes his password. This email must inform the Manager of the users that the user has changed his or her password.
  
  Thank you

  Yes, that's right, you set the operation in the XML file. There is also a RESET_PASSWORD operation for a reset if you need from the administrator password.

• Fill in the attribute manager using Quick Connect

  Synchronize us user properties of our HR system on ActiveRoles/AD using a display of DB2 and the Quick Connect.  This works very well for all attributes except Manager.  Someone know how to take the information in the view, and copy it into ActiveRoles/AD using Quick Connect?

  Not necessarily.  You can create a rule for the Manager of settlement in the target using a Powershell script as its source.

  Ideally, you have some other attribute coming from HR that allows you to search in AD Manager.

  For example, let's say that the HR system can give you the employeeID of the Manager in the field called "ManagerID.  Assume that the employeeIDs are populated on the side of the AD.

  Here's a code very bare bones to put on the side 'source' from your handler mapping rule:

  # $Srcobj is constructed so as to refer to attributes of the source objects

  $ManagerToFind = $Srcobj ["ManagerID']

  # Look for the target AD Manager

  $ManagerDN = $(Get-QADUser-includedproperties_employeeid-SearchAttributes_@{employeeID=$ManagerToFind}).employeeid

  # Return the value we found

  $ManagerDN

  You would probably add some verification (and possibly notification) here in case nothing comes back, but you should get the idea of this example.

• Management of the SmartView metadata attributes

  Hi all

  I'm trying to handle attribute selection SmartView but no success yet.

  Is it still possible? I want to say is possible to change the assignment of the attribute for membresdans SmartView dim?

  BR

  Vladino

  Hello

  Unfortunately, I think they forgot implement the attribute management in Smart View

• Attribute CFLDAP and Manager

  I have a CFLDAP query I use successfully for updating the user's Active Directory attributes several. However, when I try to update the attribute 'manager' by inserting managers DN, I get the following error:
  
  An error occurred while trying to execute change: [LDAP: error 000020-19 b 5 code: AtrErr: IDDM-03152392, #7: 0: 000020 b 5: IDDM-03152392, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 15000 a (Manager) 1: 000020 b 5: IDDM-03152392, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 15000 to (manager) 2: 000020 b 5: IDDM-03152392, problem 1005 (CONSTRAINT_ATT_TYPE), data 0] [, Att 15000a (Manager) 3: 000020 b 5: IDDM-03152392, problem 1005 (CONSTRAINT_ATT_TYPE) data 0, Att 15000 has (Manager) 4: 000020 b 5: IDDM-03152392, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 15000a (Manager) 5: 5 000020 b: IDDM-03152392, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 15000a (Manager) 6: 000020 b 5: IDDM-03152392, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 15000a (Manager)].
  
  DN the Manager has 6 commas in there, so I think the problem is I'm trying to update the attribute with a multiple entry of the value. Here's the query I am trying to run (Note lowercase as recommended cn):
  
  < cfldap action = 'CHANGE '.
  attributes = "' Manager is cn is Jxx Lxxx, OU = CFO, OR = People, OR = Dallas-Texas, DC = cxx, DC is xxxxxxxx, DC = net" "
  ModifyType = "REPLACE".
  DN = "" cn = Exx Yxxx, OR = IT Infrastructure, OU = SVC - OPS HE, OR = IT Operations, OR = People, OR = Dallas-Texas, DC = cxx, DC = xxxxxxxx, DC = net ""
  Server = "xxx.cxx.xxxxxxxx.net"
  username = 'xxxxx '.
  password = "xxxx" >
  
  I tried the search through forums, google, etc., and although many people have the same problem, I don't see where this has been answered.
  
  If anyone has any ideas or has an answer please share! I have a couple hundred profiles updated with information from the Manager!
  
  I thank all in advance.
  Eric
  

  Eureka! Don't you know, after a week of trying to get this working, I post a message and then understand it!

  For those who are curious, you must use the separator = "" attribute within the query CFLDAP to change the separator to something else than the default comma. " If the default, the Manager attribute value fails A.D.s integrity check. The following has worked like a champ:

  
  ModifyType = "REPLACE".
  DN = "" CN = Exx Yxxx, Infrastructure OR = IT, OU = SVC - OPS HE, OR = IT Operations, OR = People, OR = Dallas-Texas, DC = corp, DC = xxxxxxx, DC = net ""
  attributes = "Manager = CN = Jxxf Lxxxx, OU = CFO, OU = People, OR = Dallas-Texas, DC = corp, DC = sxxxxxx, DC = net"
  Separator =' | »
  Server = "xxxxx".
  username = "xxxxxx".
  password = "xxxxx" >

• Adding attributes of search results page

  Hello

  I'm trying to add the attribute manager in the results page in the console identity IOM.

  

  We can add Manager and other attribute IOM to customization? I tried bin customization to sand, but could not understand how to add an attribute to the search results page.

  Please suggest.

  Thank you

  Hello

  I managed to find a single instance of PS2 and capable of displaying the User Manager.

  Take a look:

  

  But I see that the column name does not appear, so you should be able to hardcode a value 'Manager' in the column,

  Otherwise, you can save a SR with Oracle to confirm correct operation.

  ~ J

• Get the attribute value of a def page table by using el expression.

  Hello
  
  Use Jdeveloper 11.1.2.0.0 and have a requirement like this for which a sample is created. Requirement is as follows...
  
  1. do you have a Taskflow with a readonly employee table.
  2. by clicking on a button called "itinerary" checks if the selected line, the attribute Manager id value = 200 then go to the first page on the other if the value attribute id manager is 200 then go to the second page.
  
  
  Through the def page, if it has the form, then we can access the attributes like #{data.view_FirstPageDef.ManagerId}. In the case of acquisition of the same attribute value from the table using the def page? is what I am unable to get...
  
  Come to the notion of routing using the router on Taskflow activity. But I am unable to get the selected row in a table of employee page def attribute value. Can anyone suggest on the same...
  
  
  Thank you and best regards,
  Olivier G

  On the router, right-click on its icon in the workflow and create a page definition. Then in the file def, add an iterator based on the same view of the table object in the first page, then add a value attribute that is mapped to the managerId in the iterator of the View object. Finally in the router, you can write EL expressions along the lines of #{bindings. ManagerId.inputValue = 200} or #{bindings. ManagerId.inputValue! = 200}.

  CM.

• Can't remove the Manager field in AD by IOM 9.1

  Hello
  I'm removing the Manager for a user in the AD profile without changing the Manager ID in the profile of the IOM. I get error when I try to change the attribute Manager replacing a string NULL below.
  
  LDAP: code error 21-00000057: LdapErr: IDDM-OC090B8A, comment: error in the conversion of attribute operation, data 0, v1db1)
  
  
  I get the same error, even if I'm changing the Manager field in AD without changing the Manager field in the IOM.
  
  I try with the code below.
  
  BasicAttributes a = new BasicAttributes();
  at.put("Manager","");
  context.modifyAttribute(UserDN,2,at);
  
  What could be the reason for this error? Please help guys.
  
  Published by: User_OIM on December 27, 2012 19:06

  Create so first BasicAttribute object and then pass it inside the method could

  BasicAttributes a = new BasicAttributes();
  BasicAttribute ba = new BasicAttribute("manager");
  at.put (BA);
  context.modifyAttribute(UserDN,3,at);

• definition of the attributes in the context of faces.

  Dear all,
  
  Attributes can be set in instance.programatically FacesContext. If so, how.
  I just read a book where I found this.
  

  Finally, note that, thanks to the new custom field feature, it is possible to store
  beans managed within the scope of attributes FacesContext declaring < managed beanscope > # {}
  facesContext.attributes} < / managed-bean-scope > in the XML declaration for
  the bean managed

  how can set the attribute programmatically?
  
  Kind regards
  David
  
  Version of the component
  =========     =======
  11.1.1.59.23 ADF business components
  Java (TM) Platform 1.6.0_21
  Oracle IDE 11.1.1.4.37.59.23
  Support versioning 11.1.1.4.37.59.23

  This is part of JSF 2.0

  Docs [url http://download.oracle.com/javaee/6/api/javax/faces/context/FacesContext.html#getAttributes ()] here

  For example, you can't use it in the current version of the ADF.

  A quick Google confirms it (your book is [url http://books.google.co.uk/books?id=aNRq-8GlRYQC&pg=PA82&lpg=PA82&dq=Finally,+note+that,+thanks+to+the+new+Custom+Scope+feature,&source=bl&ots=U2j1a2lsrf&sig=oUxWgkTuuyzlzpTcRfcB_69e2C0&hl=en&ei=C7yBTZexNsHRhAe0vsGzBA&sa=X&oi=book_result&ct=result&resnum=1&ved=0CBcQ6AEwAA#v=onepage&q=Finally%2C%20note%20that%2C%20thanks%20to%20the%20new%20Custom%20Scope%20feature%2C&f=false]about JSF 2) If you wanted to find out more about How do it, I guess you can read Chapter 13...

  John

• The purpose of programmatic view called several times ExecuteQueryForCollection

  [JDev/ADF v11.1.1.5.0]

  I am trying to create a VO that is not supported by DB, but instead takes its data from an external source (subsequently, a web service, but that's irrelevant to this question). I followed on each sample, I found and have created the VO and all overridden methods. I use this VO to create a LOV list for a VO another attribute, and the values in the LOV will vary based on a value in another attribute in the main volume (this is called LOVs cascading in various places).

  Here's an example, using the HR schema (a little artificial, I admit it):

  -Two your - DepartmentVO and ManagerVO - are defined

  -The DepartmentVO is supported by the DB and a normal EO and VO.

  -L' Manager in the DepartmentVO attribute is set to a supported by the ManagerVO LOV

  -The ManagerVO is programmatic and returns a list of employees who are in the same Department as the DepartmentID in the line of master DepartmentVO. To do this, use a Bind Variable (DeptId) that is set up to take the value of the DepartmentID attribute in the current line of DepartmentVO. This value of binding is used to filter the list of employees referred to only in the same Department.

  -J' replaced the executeQueryForCollection method in ManagerVOImpl. Here, I retrieve the value of the variable DeptId bind parameters passed in object/object2 to the method, and then use to retrieve employees in this Department of my main source.

  So far so good. Presents all works. (He lifts the employees in the same Department and displays them in the popup LOV.) If you change the Department then click to display the attribute Manager LOV, it shows you the list of employees in the new Department.)

  The problem I see is that the executeQueryForCollection method is called several times (2 or 3), causing the recovery of employees in the Department occur several times. For example, the test by running the AM executeQueryForCollection is called when I click the button to display the popup LOV (which makes sense). However, it is said AGAIN when I click the OK button in the popup LOV after selecting one of the values. (This should NOT!) And, if I create a JSF page and drop the data control to create a form and test it in this way, the executeQueryForCollection is called THREE times!

  I have the logic in the class ManagerVOImpl, which checks whether the list of employees has been recovered already, and if so, it's just returns the existing list. However, multiple calls are actually coming from different instances of the VO class, so that they only "see" the list has already been retrieved (because she was retrieved from another instance of the class, not this one).

  So my question is: How can I ADF do not call the executeQueryForCollection several times during the use of the VO as a LOV so that my (very expensive) call in the master repository to retrieve the list of employees is not executed more than necessary?  Is my only option to implement share caching mechanism myself that stores the list of employees of a Department somewhere in memory? I thought that ADF BC will make caching for me at the level VO?

  Thanks for any help that anyone can provide. I have literally been taken with that for two weeks, when I thought it would be a 'fast' to implement! :-)

  I'd be happy to upload/attach the source of my 'ManagerVOImpl' class, if that would be helpful.

  Have you tried to put a conditional statement in your back-end call happens only on your principal of the VO and not on the other 2 forums and see if that affects your functionality?

  that is, if (myIdName == "myVOInstance") {}

  do things;

  }

  I did it with VO this call that some heavy DB stored procedures in the executeQueryForCollection.

• Creating hierarchy in Weblogic Server user

  Hi all
  
  I created users in weblogic server and they assigned to specific roles. I need to create a hierarchy between users. But I could not find the attribute manager for created users.
  How to create a hierarchical users. Kindly help me.
  
  Two Cents,
  Knani

  Hello knani,.

  Hope you work with LDAP Embedded only, if so, then user hierarchy is not possible.

  Best ways would be to create groups and manage the situation.

  Link below might be useful:

  http://docs.Oracle.com/CD/E13155_01/WLP/docs103/users/users.html

  Another way would be to use external ldap and give a try.

  I hope this helps.

• build the hierarchy for delegate/delegate tasks of human workflow

  Hello
  I'm new to human workflow.
  I installed Oracle SOA suite 11.1.1.6 on the windows machine 7.
  I want to build a heirachy, as well as develop a feature for climb/delegate a task.
  For example, to specify a user as Manager and secure then carried forward to this user.
  It does not require any directory server or weblogic application server is sufficient.
  Please let me know how this can be done.
  To achieve this pointers are much appreciated.
  
  With respect,
  Hard

  Hi harsh,

  You'd be fine using LDAP or (for your development tests) to use WebLogic security field.

  My guess is that you watched the WebLogic default security field and noticed that there was no attribute of 'manager' for users as there are in LDAP. Although you cannot use the WebLogic administration console to add a handler for a user, you can do so when you are seeding to users by using an Ant script.

  Here is an excerpt of the XML file in the script, you send:

       
       datwoood
       welcome1
                  Consulting
       [email protected]
       
       Dan
       Atwood
       datwood
                  America/Los_Angeles
       en-US
       100000006
       200000006
       300000006
        
  

  If you have already run the DemoCommunitySeedApp Ant script provided by Oracle for your development environment, you have already some executives put in place for users that you filled with this script. Review the XML code that is run and you will notice that 'wfaulk' is the Director of 'jstein' and 'jstein' is the Director of «jcooper»

  What can be confusing and you, is that even after running the script, you see not the attribute manager for WebLogic security users. It doesn't matter - you will still be able to assign tasks based on a user handler in a human task.

  Dan

• "workflow" Orchestrator for anthentication

  Hello

  I'm new to the Orchestrator, I run some of its workflow to the outside,

  so I would like to know weather orchestrator provides any workflow that will authenticate the average user if I give the username and password of this workflow must take this user name and password as input, and check the weather these credentials match the orchestrator credentials...

  Please help me

  -Alexandre

  Hi Tanvirao,

  I didn't find any possibility in vCO to run the custom Ldap query, but with the Plugin from Microsoft, you are able to get some AD-object attributes (not all). The Manager attribute is also available.

  vCO with different objects handles Ldap-one is LdapUser and is similarly to the MS-Plugin: Microsoft user, with the LdapUser object you can not get the attribute manager, but with him, you get the current user of the execution of workfow runnig LdapUser.

  I wrote two actions which is attached. One to convert the LdapUser object in the MS-Plugin-user object and the other to get a property from the MS-user object.

  With the following script code, you will get the Ldap-object manager using the two actions:

  var objLdapManager = null;

  var objLdapUser = Server.getCurrentLdapUser ();

  var objADUser = System.getModule("com.alstom.vco4.basic").convertLdapUserIntoAdUser (objLdapUser);

  var strManager is System.getModule("com.alstom.vco4.basic").getAdUserAttribute (objADUser, "manager");.

  If (strManager! = null) {}

  objLdapManager = Server.getLdapElement (strManager);

  System.log ("the Director of '" + objLdapUser.commonName + "' is '" + objLdapManager.commonName + "". "");

  } else {}

  System.log ("the Director of '" + objLdapUser.commonName + "' could not be found.");

  }

  I hope this helps.

  Rainer

• Remove a movieclip permanently

  How can I delete a movieclip and then recharge again but the movieclip must have disappeared.

  What happens is that the movieclip will disappear, but when I mouse over the same

  MovieClip appears again.

  It is really only 2 ways. Without access to the JSFL you cannot delete this object since the 'Timeline' flash. I'm being very explicit in saying that. Because you hand-place an object in a layer on the timeline, whenever the playhead goes back to that govern what you are doing is telling Flash to run all the code necessary to place this item on the screen. It's all done Flash .exe. It is re - running the same code to create.

  Now if you did this object using the code yourself in this picture, you can remove a little easier. However what this object is that you did on the timeline (the motion tweens, filters, etc.) are ALL going to need to be re-created programmatically.

  Maybe you can explain your need to remove this point and I could suggest a way to accomplish the simplest possible. You really only try to turn 1 point on or off or are you trying to manage several objects? If it is multiple that begins to get a little more difficult.

  To give you an idea of what I'm probably going to recommend manages just 'State '. For example, on the frame1:

  first time run us the application, set a global variable to display Acid_3 or not

  If (this ["showAcid3"] == null) {var showAcid3:Boolean = true ;}

  General function

  function removeSelf(e:MouseEvent):void

  {

  We remove the Acid_3?

  If (e.target.name is 'Acid_3')

  {

  now, we put State

  showAcid3 = false;

  Now we see it is no longer

  }

  DisplayObject (e.target) .removeEventListener (MouseEvent.CLICK, removeSelf);

  removeChild (DisplayObject (e.target));

  }

  We have reached this frame. Want to be Acid_3?

  If (showAcid3 is true)

  {

  Yes, we want to show

  attribute Manager

  Acid_3.addEventListener (MouseEvent.CLICK, removeSelf);

  do nothing else, it will rebuild the chronology

  }

  on the other

  {

  We don't want to show, hide, and disable

  Acid_3.visible = false;

  }

  I know that sounds like a lot of code, but it's pretty simple. At the first start of your SWF file, it sets a variable (showAcid3) true, which means show Acid_3. If you click never to remove it, it sets this variable to false. When you return to this framework he checks the status (true or false), and if it is true, it assigns a click handler and allows it to be visible, otherwise it is just off its visibility.

  Note: You must have left the chronology where Acid_3 exists before never get back to it. If you do not, you do not return back to frame 1 where Acid_3 is built by the chronology. So, when you remove the Acid_3 by clicking on it, it removes the name of the instance 'Acid_3 '. I think of this in the code, so the code will then break. Leaving frame 1 (from anywhere that there is no such thing as acid_3 on a timeline) and back, you will probably ask Flash to recreate what is needed for this example.