ADSContainer - IT operating data

Similar Questions

• Non-operational data to Smartphones blackBerry service

  I downloaded the free update for Shazzam and now get the above message when you try to open the App World.  I deleted Shazzam and still get the same message.  Any help would be appreciated.  Thank you.

  The phone has rebooted after deleting Shazzam, but I guess that it does not work as well as pulling on the battery.  It works now.  Thanks for the help.

• BlackBerry smartphones unavailable data Services & data of non-operational service

  I have a sim card, but I blocked the internet and I only use WiFi to surf the internet through my phone. And recently, I bought a BB Curve 9300. However, whenever I try to go to BB app world via wifi he'll tell non-operational data and service everytime I try to log in to msn it will say not available data services. My question is, I need data plan to use both apps?

  Hello!

  Indeed, Yes, this is a paid service.

  You can check the activation of the BIS by seeing the "EDGE" symbol on your home screen of your device.

  I hope that solves your problem!

  If your problem has been resolved then would you be asked to click 'Like' and accept as a 'Solution' that other advisors invest it times on this Message more.

  Thank you.

• IT operating characteristics

  Hi all!

  I would use the data of the Department with the combination of the definition of the operating account associated with a service to create an AD account in Active Directory dynamically assigning Department to a person through dynamic role. IT of exploitation of the data of a Department would put the account on the right container. AD

  But when I create account definition without specifying a container inside (via HE operating data) accounts are created in the upper container. But I want to clarify the container appropriate through the Department of data management using the specification of the domain.

  How to do this?

  And one more thing, is - that IT periodically operating data reapplied after that I have change for example the container either manually or programmatically? Or is IT data just for the initial setup of operation?

  Thanks John

  I'm not shure that I understand but to assign the AD Department container you must go to Settings Configuration and TargetSystem\ADS\ADSContainer\ITDataFrom the Department value.

  

  If that's not enough then look at the model UID_ADSContainer@ADSAccount and change it to your needs.

  Denis

• Data login Cellurar on iPad 4

  I have an iPad 4 and I'll have the data cellurar connection. I tried to remove the sim card and I have reset the iPad (clear content and settings) and there is no change. The internet connection does not work and sometimes I'll have a very limited connection inform notifications (from the bbc, cnn, which I subscribed). I can't navigate when I use safari. I joined the service provider (Airtel Malawi), but they were not able to find the solution. I'm IOS 10.0.2 operating data problems cellurar started when I had updated to IOS 9 and, before that, cellurar data were not a problem.

  Please help me.

  Lusekero.

  Cellular data are provided by your provider. You have to work with them.

• Is it possible to recover data using the Eloqua API web service for submission of form?

  I want to recover the data of contact of a form. I couldn't find examples on the webhelp API, and therefore, do not know if this is possible.

  Hello Shashank!

  Yes you can certainly do with the API.  You must save the data report to send a form as a saved report. You can then use Eloqua DTS (data transfer service) wsdl to generrate a url that is a link to the report.  Your system can then consume the URL and get the data in the report.

  The applicable methods are

  Overview of the operations data Export

  InitializeDataExport

  DataExportStatus

  GetDataExportURL

  I hope that helps!

  If you want more etailed information please submit a ticket to support, and we will be happy to help you.

  Best regards

  Dave Seaton

• Avoiding the TRUNC as a condition of setting for the date of transaction

  I've never noticed this before, but tonight I have tested a query and made a trunc (mmt.transaction_date) between April 1, 2012"and 20 April 2012 ' in TOAD and I noticed it was taking a long time to run.
  
  If I remove the trunk and use mmt.transaction_date > = 1 April 2012 ' and mmt.transaction_date < 21 April 2012 "the query ran a lot faster and the explain command plan was also much better."
  
  Then I read that this truncing the date of the operation will be used the index on this field in the table when searching it.
  
  But if I change the setting so that the condition is set to add - it to the parameter, it does not work and maybe someone can help you. This is probably an obvious solution that I just think not.
  
  I created the discoverer as conditions:
  The operation date > =: Start Date of Transaction
  and
  The operation date < = (: Start Date of Transaction + 1).
  
  But I get an error "one of the arguments of the function has an invalid data type.
  
  Or maybe I'm wasting my time trying to avoid using the TRUNK on the date of the transaction?
  
  Kind regards
  Jerry

  Hello

  You should be OK with the condition:

  The transaction date > =: Start Date of Transaction and the Transaction Date< to_date(:transaction="" start="" date)="" +="">

  Rod West

• Apex 4.0 in the Date de Validation bug

  Hi friends,
  
  Im trying to validate a date picker component. In this sense, means what validation I've done. Booking_start_date must not be less than sysdate.
  
  Type: sql expression
  
  Expression1 validation:
  

  : P2_BOOKING_START_DATE > = SYSDATE

  but validation above does not work as it is throwing an error like
  

  ORA-06503: PL/SQL: Function returned without value
       Error      ERR-1023 Unable perform validations.
  OK

  While this may be a bug in APEX?
  
  
  Brgds,
  Mini

  Mini wrote:
  Hi friends,

  Im trying to validate a date picker component. In this sense, means what validation I've done. Booking_start_date must not be less than sysdate.

  Type: sql expression

  Expression1 validation:

  : P2_BOOKING_START_DATE > = SYSDATE

  but the validation above does not work as it is throwing an error like

  ORA-06503: PL/SQL: Function returned without value
       Error      ERR-1023 Unable perform validations.
  OK
  

  While this may be a bug in APEX?

  N ° all APEX elements are stored as strings. Explicit conversions are required when Oracle is unable to perform implicit conversions before operations date/number, for example when items have default format masks:

  to_date(:P2_BOOKING_START_DATE, 'DD-MON-YYYY HH:MIPM') > SYSDATE
  

  It is advisable never to rely on an implicit conversion in all circumstances.

• With the help of expdp/impdp in pump data

  Hi all
  
  I am newbie in oracle database through the use of data import and export oracle data pump. I use Oracle 10 g 2 on Windows 7
  
  After you create the directory object 'test_dir' and the granting of read, write privilege to user scott, I connect like scott to the database and create the table 'test' with two rows.
  
  Then I run expdp command prompt as follows:
  
  C:\users\administrator > expdp scott/tiger@orcl tables = happy test = all = TEST_DIR dumpfile = test.dmp expdp_test.log = logfile directory
  
  Export: Release 10.2.0.3.0 - Production on Monday, June 13, 2011 20:20:54
  
  Copyright (c) 2003, 2005, Oracle. All rights reserved.
  
  Connected to: Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - production
  tion
  With partitioning, OLAP and Data Mining options
  Departure 'SCOTT '. "SYS_EXPORT_TABLE_01": scott/***@orcl tables = test content.
  = all = TEST_DIR dumpfile = test.dmp expdp_test.log = logfile directory
  Current estimation using BLOCKS method...
  Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
  Total estimation using BLOCKS method: 0 KB
  Object type TABLE_EXPORT/TABLE/TABLE processing
  . . "exported"SCOTT" TEST' 0Ko 0 rows
  Table main 'SCOTT '. "" SYS_EXPORT_TABLE_01 "properly load/unloaded
  ******************************************************************************
  Empty the files together for SCOTT. SYS_EXPORT_TABLE_01 is:
  D:\DAMP\TEST. DMP
  Job 'SCOTT '. "" SYS_EXPORT_TABLE_01 "conducted at 20:21:02
  
  My question is why data pump seem to export the table 'test' without lines (that is to say the line: exported 'SCOTT'.) ("' TEST ' 0Ko 0 lines)? How can I do it with the associated export lines?
  
  
  I dropped the table test, then I ran the command impdp as follows:
  
  C:\users\administrator > impdp scott/tiger tables = content test = all = TEST_DIR dumpfile = Test.dmp impdp_test.log = logfile directory
  
  Import: Release 10.2.0.3.0 - Production on Monday, June 13, 2011 20:23:18
  
  Copyright (c) 2003, 2005, Oracle. All rights reserved.
  
  Connected to: Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - production
  tion
  With partitioning, OLAP and Data Mining options
  Table main 'SCOTT '. "' SYS_IMPORT_TABLE_01 ' properly load/unloaded
  Departure 'SCOTT '. "" SYS_IMPORT_TABLE_01 ": scott / * tables = happy test = all
  Directory = TEST_DIR dumpfile = Test.dmp logfile = impdp_test.log
  Object type TABLE_EXPORT/TABLE/TABLE processing
  Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
  . . imported 'SCOTT '. "' TEST ' 0Ko 0 rows
  Job 'SCOTT '. "" SYS_IMPORT_TABLE_01 "carried out at 20:23:21
  
  
  Then, after selection * test. No rows returned
  
  Please someone with an idea to this topic... What I expected after operation data in table view pump it could export and import table with the data if I'm not mistaken.
  
  Concerning
  Sadik

  Sadik says:
  He had two rows

  Export is disagreeing with you.
  have you COMMITTED after INSERT & before export?

• BC ADF11g CRUD operations

  Hello
  Environment: 11g ADF RichFaces, BC
  I have a simple form where to save data on database emp. And I have an ADF table to display the list of PMCs with update and delete operations.
  
  To update a record, I need to select the record to make changes, click on run what seems update the buffer and then when we click the button of the data validation are persisted in db.
  
  Please suggest if we combine both perform and engage in a single operation. (data persistence during the click on "Execute" itself) (without using a managed bean)
  
  Thanks in advance
  RAM

  Delete the "Update" button and change the label of the button "Validate" "Update."

  John

• How combine tdms files

  Can someone help please...

  My compact rio records in recent weeks, and to avoid loss of data (power failure etc.), the connected tdms files are divided into segments of 10 MB. The trouble begins when I try to attach the files to back up. The only way that I can find is to drag all the files in the tiara browser window, and then use the copy data view operations data table for each section of the file block - make a note of the new total line as the original file increases in length. It is a very boring and repetitive task.

  Does anyone have a script function to perform this task in batch?

  Concerning

  Karoline

  The most effective way to do this is actually through the shell:

  copy /b "C:\temp\merge tdms\test 0.tdms" + "C:\temp\merge tdms\test 1.tdms" + "C:\temp\merge tdms\test 2.tdms" /b "C:\temp\trash\blah.tdms"
  

  It is safe to concatenate the files TDMS_INDEX, also a long time that you concatenate them in the same order. It is also safe (and more practical) to remove them. Tiara will be re - generate.

  If you plan to use wildcards so for example to merge all files in a folder, you may need to find a way to make sure that they get concatenated in chronological order. Windows do not by default.

  Herbert

• Locking enum value

  Hey all,.

  I want to lock an enumeration with a specific value, and essentially make a constant. Basically I want the enum to keep a value I select when registering whenopening and closing of VI. Maybe that I want just the code for too long, but is there a simple way to define a default value for the enumeration, which is not the first or last value in the list?

  Thanks a bunch!

  You can make any value by default, but it requires an operation of "Save" to store the new settings. Simply right-click the enum and "operation data... make current value by default".

  It should not be operated at run time, making this option disabled.

  If you need only on the diagram, change it to a constant of diagram instead.

  Sometimes it is easier to store values in a configuration file, in this way, the value can be set externally to the VI.

• Serial port to XL

  I want to read data from the serial port and write in an excel sheet.  Looking for example screws 'basic series read and write' and 'write table to XL', I think it can be done by replacing the table in the second by the buffer in the former. When I try to do, I get an error saying that "you have connected two terminals of different types'" they cannot be wired together as their data types (digital, string, array, cluster, etc.) do not match. " View the contextual help window to find out what type of data is required. The source type is a string. The type of the sink is a 2D-string table.  How can I solve this? Is it possible to write the reading bug (which consists of numbers only) in a table? Or can I convert the string to string in array 2D?

  If you have two options

  (1) convert the string to a 2D array and give it to the Table.

  (2) or see the VI that takes the 2D as an input table. I guess it's a variable variant and the will except any operation data. So change this vi and a control to the string instead of wire Table

  Guru

• VSS 8194 ID event after installation of 4.6 STRUCK

  I've seen this with some customers separated now.  The error ID 8194 event appears on the Hyper-V with the installed HIT 2012 hosts. Has anyone seen this?

  The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface. HR = 0 x 80070005 access is denied.
  . This is often caused by incorrect security settings in the process of the writer or the applicant.

  Operation:
  Data collection of Writer

  Context:
  Writer class ID: {e8132975-6f93-4464-a53e-1050253ae220}
  Author name: System Writer
  Writer Instance ID: {c4cafe6b-9e92-49e6-b95e-35b7cd4c0cac}

   

  The forum below intimates that existed previously and the achievement points.

  http://social.technet.Microsoft.com/forums/en-us/c66d3ab4-44D7-4a24-bb4b-9b20b3ed56d1/backup-of-HyperV-2012-CSV-intermittent-fails-with-error-0x80042301?Forum=dpmhypervbackup

   

  It seems a solution is to configure removing access to the network service account, it does really is to stop the call to VSS, so no access not denied error is reported. The double \ is the result of the export of registry and is required.

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VSS\VssAccessControl]
  "NT Authority\\NetworkService" = DWORD: 00000000

• Installation of BlackBerry App World on Simulator

  I try to install App World on a BB9300 Simulator. I open the web browser and follow appworld.blackberry.com OTA installation and the application installs fine. However, when I go to run it, I get the message:

  "The non-operational data service.

  I'm testing call world app of my application, so users can easily upgrade to the paid version. Any ideas how can I get app world working on a sim card (no matter what sim will do).

  BlackBerry App World is not supported in BlackBerry smartphone Simulator.  You will need to test this on a real Smartphone BlackBerry.