Samsung RV511 win 7-10 win

Similar Questions

• can I mount a t9300 in samsung rv511

  Hi, I have a broken dell d630 with a chip intel t9300

  will fit it in my samsung muni rv511
  an intel p6100 chip?

  Hello

  What operating system do you use?

  I suggest you to contact Samsung support center.

  http://www.Samsung.com/us/support/

• The user profile Service has no connection (Win 7)

  As I see it is a fairly common problem, I read through several suggestions and try my options, but I'm still stuck.

  The challenge is that I can not connect as an administrator. There is only one user, which is also the Director, and apparently it is corrupt. All the solutions I've found seems to start with "first of all, log in as an admin..." - but there is the problem: I can not connect at all.

  I'm ready to start over again and wipe this laptop (Samsung RV511), but I prefer to get with this user if possible.

  Any suggestions are greatly appreciated.

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Unreadable drop-down lists

  I've updated Thunderbird to the 31.4.0, version and now I have strange unreadable drop down (see attached photos). While I move the mouse on the lists, they are acting strange (as shown in photo 2).
  My setup: laptop computer Samsung and Win 7 Home Edition.
  Thank you!

  Alexander

  Just a thought, you have updated your graphics card drivers? My problem with the drop down menus of TB were fixed when I updated my Nvidia driver.

• HP 8760w upgraded with SSD SATA 6gbs does not

  I have a HP 8760w and I put a Samsung 840 Pro 256 GB SSD inside.

  In BIOS SATA is set to 6 Gb / s, but when I enter the program Samsung magician (win 7) its tells me that 6 GB / s is not available.

  What can I do to get 6 Gb / s to work?

  Running win7 and Ubuntu 14.04

  It's a bug! When you select 6 Gb/s its done select 3 Gb/s. When I chose 3 Gb/s its now running at 6 Gbps in win 7 and Ubuntu...

• 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

  When you try to upgrade Windows 7 SP1 to Windows 10 ' 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation "is a problem recurring and none of the solutions posted for a Samsung RV511 work.

  When will there be a solution of Microsoft?

  Concerning

  Hello

  Since Windows 10 is a completely new operating system, the computer manufacturer might still not have designed and developed drivers for it. As suggested waiting for the manufacturer to release the necessary drivers for the hardware and then try the upgrade.

• No sound on my laptop repaired

  Recently, I took my laptop for repair as the CC was broken. After I picked it up from the store and returned the sound did not work on the computer. I tested to see if it was just the internet but when I tried to play the files on my computer, I couldn't hear noise either. I went to the control panel to check and ensure the sound worked and everything was fine. I ran troubleshooting and he said everything was fine. I don't know if they have messed up something, while fixing my computer, but I would really like to have sound working again. I have a Samsung RV511 laptop.

  Hello

  Go to this link Samsung > put in the exact number > Search tab downloads > find the Audio drivers for your operating system.

  You will find probably other drivers there that you need for it, too.

  http://www.Samsung.com/us/support/

  See you soon.

• My internet keeps disconnecting even if the router works fine. He maintains have diagnosed as a DNS error any.

  I have a Samsung RV511 which is only a couple of years.  It has been disconnected from the internet every 2 to 5 minutes or more, but my router works fine.  I got a new power cord, ethernet for her, but the computer continues to disconnect. When I diagnose the problem, it indicates the server DNS does not.  Tried to contact my internet provider, but they couldn't understand why I didn't know every little thing on my computer and made me feel pretty stupid so I'm curious to see if anyone else out there it can help.

  I used to get this problem.  My connection would get a yellow top warning symbol & I could no longer communicate on the internet.  No Windows diagnosis could correct & would only sometimes identify [as a DNS problem].

  I searched for advice, but never really found a convincing explanation or an appeal.  I started using the commands below [that I found in this forum] to restore things.  It seemed most of the working time.

  Several people also suggest just reset the router, but that was irrelevant, because I haven't used one but I tried to remove and then reconnect the modem USB and sometimes helped.

  The problem seems to occur in phases, but I could never understand what was different between the good times & bad times.  I've always suspected the software controlling my USB modem but could never be sure.  I changed the USB modem & the problem went away for months before returning [but less frequently than before].  Now, I have a wireless connection with my mobile phone and use it as my modem for internet connection - 5 months without problem.

  What I did was to open a command prompt [I think he should be executed as administrator], then type:

  netsh winsock reset
  RESTART THE PC
  netsh int ip reset
  RESTART THE PC
  ipconfig/flushdns
  ipconfig/registerdns
  RESTART THE PC

  As I say, this procedure allows to sort out most of the time, but it should reappear later.

• After updating the touchpad drivers, receive press the keyboard it blocks the mouse until I release the keyboard.

  Original title:

  Updated my touchpad on my Samsung RV511 and since then, driver by pressing the keyboard it locks the mouse up to what I called the keyboard, can someone tell me how to solve this problem, I restored to an earlier date, rolled back to a previous driver and reinstalled the driver with no joy

  Hello

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run the built in the convenience store.

  Open the hardware and devices Troubleshooter

  Method 3:

  Reduce the sensitivity for control of palm.

  a. click Start , click computer.

  b. navigate to C:\Program files\Touchpad

  c. go to touchpad setting and uncheck the check the touch.

• I reinstalled win xp on my laptop but impossible to reinstall my printer samsung clp-320 wireless. help please

  I reinstalled win xp on my laptop but impossible to reinstall my printer samsung clp-320 wireless. help please

  Hello

  Thanks for posting this question in the Microsoft Community.

  To provide a proper resolution, I would need more information on your side.

  1. What is the error you get when trying to install the printer?

  2. after the installation of Windows XP, you have installed all necessary drivers?

  3. have you updated to Service Pack 3 installed?

  Please provide us with more information to continue troubleshooting as a result.

  Alternatively, you can also post this question to the Samsung support community: http://www.samsung.com/uk/support/model/CLP-320/SEE

  You can check this article to see if this help.

  Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Thank you.

• Error "api-ms-win-core-errorhandling-l1-1-0.dll" while trying to install Samsung Kies

  Title: in the api-ms-win-core-errorhandling-l1-1-0.dll file

  can all help me I have a Packard bell laptop I tried to download samsung kes he told me that she had not told to uninstal which I don't then my computer said you are missing the file as stated above, I have the loaded file, but do not know had to install. Can someone help me at the end of my rope

  Hello

   
  -Is the issue limited only during the installation of Samsung Kies?
  -You are aware of any changes made on the computer before this problem?
   
  Method 1: I suggest to follow the steps from the link below and check if the problem persists.
  How to solve the problems when you install or uninstall programs on a Windows computer?
  http://support.Microsoft.com/kb/2438651
   
  Method 2: I suggest you to contact Samsung Kies for better assistance.
  Support for Kies
  http://www.Samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00029012&fm_seq=29180
  For DOWNLOAD:
  http://www.Samsung.com/us/Kies/
   
  Hope this information helps.

• Laptop Samsung R60, set to update from Vista to Win 7 Ultimate, now battery is duff WTF?

  Hello

  I have a laptop Samsung R60 (which was under Vista) and I put a larger HARD drive in and DVD intalled a new copy of Win 7 Ultimate and all updates.

  Since the installation of Win 7 my battery lasts now only 5 minutes and the laptop goes off, where as before he would take 2 hours + with Vista.

  If I stick my old hard drive in the laptop battery is now 5 minutes where as the same day installation before sailing, new HARD drive and Windows 7 install battery lasted more than 2 hours.

  It seems Win 7 has killed my battery so I'm not happy, not only that I can't reverse the trend and return to vista and recover from life.

  Others have suffered this fate and can I do like get MS to replace?

  See you soon

  Hello

  I understand that you are facing problems with the backup battery after upgrading Windows Vista to Windows 7.

  I see that Samsung R60 laptop does not support Windows 7 operating system and also the drivers are not available.

  Method 1: I suggest you follow the steps to run the troubleshooter of material from the link and if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-za/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Step 1: I also suggest you trying to install the 'easy battery Manager' under 'Software' Samsung support link in compatibility mode under "Windows Vista / Windows XP operating system and check if the problem persists."

  http://www.Samsung.com/UK/support/model/NP-R60F002/Suk-downloads

  For reference:

  http://www.Samsung.com/UK/support/model/NP-R60F002/Suk-troubleshooting

  Step 2: Follow the steps to install the drivers in compatibility mode:
  a. right click the driver installation file and selectProperties and then tap or click on the compatibility tab.
  b. check in the run this program in compatibility mode for: box.
  c. tap or click the drop-down box and Select a previous operating system, and then press or clickOK.
  d. try to install the driver and verify.

  Method 3: If the problem persists, I suggest you to contact Samsung support for assistance.

  http://www.Samsung.com/UK/support/model/NP-R60F002/Suk

  Hope this information helps.

• When I bought my laptop Samsung Win7 he promised to upgrade to win 8 for $ 15. Why is now $ 39?

  When I bought my laptop Samsung Win7 he promised to upgrade to win 8 for $ 15. Why is now $ 39?

  see this:

  http://Windows.Microsoft.com/en-us/Windows/upgrade-offer

• SoundMax code 41 on samsung NP-X11B under Win XP SP3

  Hi, I have installed WinXp SP3 on a Samsung NP-X11B and installed all the drivers that I downloaded on the samsung website. Everything works well except when I installed the driver for his driver, I get an error code 41. After installing the driver, the system asks for a restart and once restart is completed, a window opens up to the execution of soundmaxPnp.exe (or something like that). I clicked the run button, but nothing happens. I always get the error code 41 and the icon for max sound on the system tray is crossed by saying "not found audio device, sound max could not start)

  I tried to look in the registry using the guides of the Microsoft Knowledge base, but did not find any key upperfilter and lowefilter listed anywhere for this sound key. Please help, my last option resort is to reformat the system and try to reinstall the drivers, I downloaded the samsung Web site form.

  HI, thanks for the response. Hmm, well the laptop is a teaching tool given to teachers of emitted by the Government, and they were strictly instructed NOT to make any software or hardware changes before approvals from the Board of education of the District.

  Even when he is allowed to do that, teachers need to sent the unit to the District Office the it unit. I suspect that the teacher in the case broke this code and since the laptop unit must be returned to the office when a teacher or user retires or is transferred... so... you get the drift.    It has nothing to do with any problem in Windows 7, which is the large BONE, I might add.

  Aznam

• Samsung SCX-4100 wird unter Win 7 nicht erkannt als scan!

  Druck-und Kopierfunktion tadellos, Scannen nicht possible! WER weiss Rat? Die Internet-media von Samsung durch keine Problemlosung tracing, was Universaltreiber. Scanner als der SCX nicht erkannt wird.

  Windows 7 forum - hardware & drivers-German/Deutsch

  http://answers.Microsoft.com/de-de/Windows/Forum/Windows_7-Hardware?tab=all&TM=1360244991484

  Don