VSS 8194 ID event after installation of 4.6 STRUCK

Similar Questions

• See 4.5 SSL fails after installation of the certificate

  I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5

  I set up the environment and everything worked without problems.  Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work.  The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections.  I had previously enabled connections not secure so that both connections use http still operate.

  The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA.  I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).

  After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.

  Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.

  The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.

  Hello

  > I had previously enabled connections not secure so that both connections use http still operate.

  The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.

  Because you have disabled this option, only the connections non - ssl will work for both.

  Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.

  -Noble

• Thunderbird crashes after installation of vn 38.4. Solved. Cause - bad record?

  (This question was published only because I could not respond to existing similar questions without registering first.)

  Problem was apparently a Thunderbird randomly hanging after automatic update to 38.4 on Windows 7 Enterprise. The process of dropping out/no response took place a few minutes after start of TB, compose messages, send or download of IMAP mail.

  Shortcut to the final solution - probably corrupted files or folders at the OS level.

  For those who are conducting similar research I also watched the references linked below.

  En route to the solution, various obfuscation were met, all of which were interesting but NONE OF THESE solved the problem of the suspension, namely:

  -back to Thunderbird 38.1 extracted from Mozilla's FTP repository

  -Disable all modules in SafeMode as suggested in posts below

  -deactivation of reminders on calendar, pop ups and sounds like suggested in the posts below

  -turn off sounds (in the systray) as suggested in posts below and new mail alerts

  -Discover, finally, only one of the half-dozen or so synchronized account IMAPs has caused the problem, which is an account Exchange-synced via the excellent DavMail (Davmail upgrade to the latest version was another diversion)

  -assuming that the compaction of TB was not his work and that he is too much vacuum/zombie files left lying around, leading to a redundant cleanup using Thunderfix (http://www.parhelia-tools.com/products/thunderfix/thunderfix.aspx), was nevertheless his cleaning of employment but not a solution

  What worked then...

  The procedure of backup profiles recommended TB in Thunderfix and elsewhere led to discover that the copy of Windows has won at least one file during the copy. Suspecting lower level corruption, I ran chkdsk D: /f (since all data are on D: and not on C: with the operating system). No major problems found aprt of 4 files analyzed once again.

  I resorted to the use of SynckbackSE to do the backup instead, noting that one of the failures was Junk.msf. That and the knowledge that the account linked to Exchange was the likely to be the culprit, I restarted and deleted everything in IMAPmail\localhost\ (DavMail connects via localhost stored files).

  Restart Thunderbird (always on 38.1) and connect via DavMail pulled back all messages and folders from the source Exchange to resynchronize records localhost TB successfully. No need to use backup or same setting of TB.

  Will probably now improve return to 38.1 after a period of stability.

  After years of use of Thunderbird of the dowry of the year, it's nice to know that it was not primarily at fault.

  REFS:

  Thunderbird starts by does not respond after the update to version 38
  https://support.Mozilla.org/en-us/questions/1073169

  Thunderbird crashes, hangs, or freezes often and seemingly randomly
  https://support.Mozilla.org/en-us/questions/1062142

  Why Thunderbird freezes my computer after installation of exit 38 RESOLVED:

  hardware acceleration = suspended new pop ups (bug message notification

  1186755)
  https://support.Mozilla.org/en-us/questions/1068495

  Thanks for the info

• Windows 10: After installation

  9 days ago I installed Windows 10 successfully on my iMac end-2012. I wonder since if I still need to keep my USB Flash drive plugged after installation. I have kept in just in case wherever she would break something and tried to find an answer but decided to ask here. So basically what I have to keep the flash drive in my iMac or will I still be able to run Windows 10 unless it is plugged. Thanks for all who will read this and help me with this problem.

  I see no reason to keep the flash drive is plugged.

  Was this a new installation or an upgrade of Windows 10? Your order of brightness of the keyboard (and other features on the row of function keys) work? Cam sex? Touchpad?

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• After installation of the latest version of firefox on the homepage still says that I don't have the latest version

  After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• Boot problem after installation of Linux Mandrake 10

  Hello!
  I installed Mandrake 10 on my computer toshiba tecra S1 laptop.
  But after installation and restart, the laptop stops in sequence starting with the toshiba logo.

  I tried the F12 key to select the boot device, but it does not work.

  If you have a solution to this problem please tell me.

  Thanks in advance.

  Hello

  It is not easy to tell what the problem may be, but it is possible that the boot manager not properly installed.

• How to initialize automatically Firefox immediately after installation

  I install Firefox from the repositories Fedora YUM via Kickstart. After installation, the .mozilla directory and its subdirectories do not exist. Even though I have the Firefox configuration files that I want to install, I don't have a place to put them. And since Firefox seems to create a directory .mozilla/firefox/*default with a random name, I can't easily just create the directory and then insert my files. Is there a way to do this fully automatic?

  You can put files in the default templates folder (by default / / profile) in the program folder to make them appear automatically in a new Firefox profile...

  See also:

  • http://KB.mozillazine.org/user.js_file

• can I uninstall MS Office 2008 AFTER installation of MS Office 2016?

  Can I uninstall MS Office 2008 AFTER installation of MS Office 2016 without causing a problem?

  Yes you can. Also, what follows has information on uninstallation of 2008 that can help: http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macstart/how-do-i-uni nstall-office-2008-now-that-im-using/147...

• I accidentally deleted iPhotos after installation of El Capitan and were not able to download or reinstall.

  I accidentally deleted the iPhoto app on my new mac after installation of El Capitan and are not available for download, except the updates, which obviously doesn't work. How can I get that back?

  You can probably not - most likely, you will need to switch to Photos (what would happen sooner or later anyway)

  Have you looked under purchases in the app store?  Can't update iPhoto because it is not available in the App Store

  If it is not there you can try reinstalling iPhoto 11 of the original source and the upgrade to 9.6.1 but I doubt it will work

  Or you can try to restore your backup from just before you shape did this error

  Good luck

  LN

• My seagate drive external drive keeps ejecting properly after installation of OS El Capitan

  My seagate external hard drive keeps ejecting properly after installation of OS El Capitan, it locks also towards the top and turns off, the ext drive when using, I have to restart my IMac 27 inches.  I have two ext hd who does very well for years before the installation of the operating system El Capitan

  If you have installed the Seagate Software, please delete and see if there is no change.

  Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.

  Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.

  I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.

  Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.

  Back up all data before making any changes.

  Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.

  If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.

  Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.

• No 1110ea audio envy 15 after installation of windows 8 64 pro

  No sound on my 1110ea envy 15 after installation of windows 8 64 pro.

  Maybe the audio drivers hp are repaced by victory 8 drivers?

  ass pls

  Hello

  Try the driver from the following link and see if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & DLC = in & softwareitem = ob-113849-1

• My favorite toolbar after installation of El Capitan is on the left.  How to get to the top when I open Safari?

  My favorite toolbar after installation of El Capitan is on the left.  How to get to the top when I open Safari?

  Chances are you have the sidebar option.

  

  To hide the side, go to view and click the Hide sidebar

  

• Get windows error blue screen after installation Service

  I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

  I tried to install GO twice and got the same error.

  Awating for your valuable review

  Hi piZviZ,

  Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

  (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

  (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

  (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

  I recommend just update to the latest going TO if possible.

  Kind regards

  Joseph

• Does not start after installation of the graphics driver

  After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?

  If the minimum driver was SP2, then you must have installed. I recommend that you have installed SP3 so that all the latest patches and security patches are in place.