Advanced action not updated on the click box update

Similar Questions

• Shares advanced with effect applies on the click boxes

  Hello!

  I could use some help troubleshooting one of my projects.

  I use a couple of clickboxes that perform distinct advanced actions - by clicking on the first clickbox (CB1) shows a picture, a text caption and click box (CB2) that appear with a fade-in effect apply (see the + ApplyEffect). Then, once everything is displayed, CB2 makes all melted (ApplyEffect only). It's like a pop - up glorified that fades in and out. It works very well... once!

  The problem is that if CB2 hides everything stated by CB1, I can open and close until the cows come home. However, as soon as I replace Hide to apply effects (fadeout) in advanced actions, he won't again. I click on CB1 but nothing happens.

  What I think is that CB2 is not hiding anything (only fades them out of sight) and when I click on CB1 the second time, it displays them, but I don't see it because they are always made disappear.

  I tried to add assign rdcmndGotoFrameAndResume with v_startframe at the end of advanced action of CB2, but nothing helped. Simply, he jumps the fadeout and go to the first image.

  Is it possible to delay my last action? Or maybe I do not have that sense. just started using advanced actions.

  Thank you!

  First define the variables two user I've been using: v_start and v_fadeout. No need to give them a default value.

  On the slide, in the properties, Action on enter, accordion panel you choose entitled and in the drop-down list, you select v_start and then you will need to type in the system variable $$rdinfoCurrentFrame$ $. I find it easier to make a standard advanced trigger action on enter, because in the dialog shares advanced, you can also select this variable system instead of having to type it. With this action, the value in the v_start variable will be the first image of the slide number.

  For buttons, unlike the click boxes, you can time the point of suspension in the properties, timing Accordion Panel. Here, you can type in 6 to "Pause after '... You can display two buttons during the rest of the slide (CTRL-E).

  It will automatically return to the first image, that's what makes the rewind button: assign rdcmndGotoFrameAndResume with v_start.

  There is no possibility of time in a tip action.

  Explanation of Expressions: in the first expression, I calculate the number of frames corresponding to 6 seconds. the variable rdinfoFPS system automatically gives the number of frames per second, default value is 30. If the first expression will result in 180 frames. But I have to navigate to the absolute number of this framework from the beginning of the project. That's why I add the number of the first frame of the slide that is stored in v_start.

  Lilybiri

• My button overrides the properties in the click box

  
  I have a slide with a box, click on it and it is linked to a URL.  In properties, I checked the "project of break up to what the user clicks on" because the user must check the URL before you continue.  I have it set to display text stating you must click on the link again and again before you continue.  It works well with the following exception:

  I have a button at the bottom of the slide even for purposes of recognition and button properties are set for the user to go to the next page when you click the button.

  When I save/publish my project, the project allows me to click on the button and move to the next slide without first clicking on the click box and display of the URL.  It's almost as if the blade is in 2 sections.  If I click around the area of click, but not in it, I get the failure message "you must click on the link and review the document before you continue.  But if I go inside the same Blade (further away from the click box) and click on my button, I don't get the failure message and I go to the next slide.  The button is the substitution of the rule of the area to click on it.

  Any suggestions on how to solve this problem would be greatly appreciated.

  Thank you!

  If it were me, I would hide the properties button. Then I would create a tip Action that is assigned to the click box. Configure the tip Action to display the button and open the URL in a new window.

  See you soon... Rick

• The playback controls replace the click box

  Hello

  This applies to both Captivate v4 and v5

  I have a project with playback controls that include the Pause/Play.

  I want to add two click boxes on a blade that the learner must click ' before being able to move to the next slide.

  When the slide reaches the first click box, the control Pause/Play display changes from Pause to play and the user can simply click on the "Play" option to work around the click box and move to the next slide, click point on the slide box, click 'replay' and then move to the next slide without having to go through the boxes click the slide.

  How can this be avoided so that the learner has to go through the slide via the boxes to click and do not use the set of playback controls option?

  PS. Playback controls Pause/Play are essential for the entire project, so do not show are not an option in this case.

  Noel

  Hi Noel,

  The simplest is hide the playback bar upon entering this slide and show again to the next slide. It is not possible to hide a button.

  Hiding on this slide:

  For action on enter to this slide, choose assign cpCmndShowPlaybar with 0

  Display the next slide

  For action on enter to this slide, choose assign cpCmndShowPlaybar with 1

  Lilybiri
  

• Buttons and version 5.5 using the Click Box

  Using Captivate 5.5, in the same blade I try to use a box click to access a URL, but also to pause the slide with a button continue. When the click is selected, the URL is displayed, but the Captivate project moves to the next slide. My goal is to have the project on hold and require the participant to click continue to go to the next slide.

  With the above said, if I deselect the option to continue playing the project on the click box, continue it button does not appear.

  Can anyone help?

  Hello again

  With my suggestion, the script might look like this:

  Click on the image to enlarge

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• A4: The Click Box and feature button

  Hello

  I am creating a slide of summary in a project of capitvate users will consider before taking a quiz.  I would like this slide contains hyperlinks on various documents.  I want users to have and an unlimited number of time to look these over, and then click all they are interested in and then click a button to continue the quiz.

  No matter what options I put the click box, the project will continue for the quiz when a user clicks one of the hyperlinks!

  Here is an example of this tutorial (just the blade of the review and the first quiz slide): https://mywebspace.wisc.edu/lfschmidli/Captivate/sample.swf

  And here are the settings I have for hyperlinks and the click box and the button:

  Hyperlinks (ie: "of the INDEX Module 3'): https://mywebspace.wisc.edu/lfschmidli/Captivate/hyperlink.PNG

  Click box (which is transparent and sits on top of the button "Take the Quiz"): https://mywebspace.wisc.edu/lfschmidli/Captivate/clickbox_takethequiz.PNG

  Button "Take the Quiz": https://mywebspace.wisc.edu/lfschmidli/Captivate/button_takethequiz.PNG

  I would be grateful all solutions!  It drives me crazy!

  Thank you

  Laura

  Hi Laura

  From what I have seen that you have specifically selected off the options to pause the movie until the user clicks. So now you're stuck as to why the film is not a break.

  Try to activate the option to pause. You can also view the page on the link below: more precisely point 13.

  Click here to see

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• Problem opening URLS in the click box

  Hello
  
  I cannot start a file from a click box. I enter the url and deselect contine, running project. I have test the link in the preview and it works fine. However when I publish the file of the click box does not work. I click it several times and finally all that happens is the next slide appears. Something that should not happen at all.
  
  I tried using the buttons instead, again it works in preview, but not when I publish the course. I also tried selecting and deselecting her continue running Project box.
  
  Someone at - it had a similar problem? Know of a solution?

  Hi ntompkins

  Often we see problems when you try to run the project to your local computer. Could be Flash security settings. If this is the case, see if the tutorial below the help link.

  Click here to see the tutorial

  Note that this affects only playback on the local PC. If you have decided to copy the files on a web server and your users will run from there, you have nothing to worry about. If your intention is for each user to copy the files to the C: drive and run from there, then you concerns. But there are solutions if this is the case.

  See you soon... Rick

• can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

  Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

  I found this in another thread that you created [*]:

  I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

  I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

• Button on the printer does not appear in the PageSetupDialog box.

  Hi all

  We use the instance of PageSetupDialog which works very well under XP, but we run our application in Win 7 Print button does not appear in the dialog box how to back this printer button

  Hi vaibhav,

  1. what application you are faced with the question?

  2 are you facing this problem with a specific application or with other applications too?

  3. do the printer works fine on your system?

  Please re - write your question, this time make sure you have all the necessary information to help you better on this issue.

  Suggestions for a question on the help forums

• When I place my svg file is not displayed in the dialog box

  When I place my svg file is not displayed in the dialog box

  Hi Hernanv24680251,

  Muse so far don't show any dialog box when you place an SVG in it. Please see the link below which explains more using SVG in Muse.

  With the help of Graphics SVG in Muse

  Kind regards

  Vivek

• When I start typing in the upper right search box, after a few letters are typed, a menu drops down with choice. When I click on a choice, it does not appear in the search box and I have to type it myself.

  When I use the search box at top right and start typing a word/words when the menu of possible choices appears and I click one I want, nothing happens. It is not automatically put in the box as he used to and I have to type everything.

  You have the extension installed Google toolbar?
  
  If so, try disabling it.

• using advanced actions to determine if the correct keys have been selected

  I use Captivate 5 on Windows 7 to create a quiz that will test the ability of the users to select inappropriate e-mail parts by clicking on them.  So far, I have set up the scene and left buttons to image for each item in the email.  Each sentence, the address line, the subject line, etc it's own image button.  The goal is to create a user by clicking on the item of electronic mail and it highlighted red (selected).  Once the user has highlighted all the elements that they think is inappropriate, it will be then click on the ' send' button (button image), that will calculate if the correct image buttons have been selected.

  Here is an example of the stage with all image buttons:

  

  My question is how I would start setting up advanced actions 1) select each button when you click it, and then turn off highlight when clicked again) 2 calculate if the correct buttons are selected when you click on the button send 3) the user to correct or incorrect slide, based on their selections

  Thanks in advance for any help you can provide.

  FOR INFO.  The right answer for this mail would be if

  Button_15

  Button_17

  Button_18

  are selected and

  Button_12

  Button_16

  Button_19

  Button_20

  Button_21

  Button_22

  are not selected

  OK, an example of file which seems to work. I created in Captivate 6 but the workflow will be the same in 5.5. Avoided using the new features. I used boxes to click on text fragments. I was wondering if you want to limit the number of fragments which can be clicked (is not in the scenario):

  • Enter by clicking on the parts of text, their labeled CB1_NOK, CB_2OK,... even if it is not so important if she'll give a score or not. I had 3 good.
  • To correct, click boxes, I added a score (5) in the accordion reporting, audited include in Quiz and add to the Total. to bad I did nothing in this accordion; Click on boxes have a break before the break of the button check, I've shortened their duration at 2secs, while check button stops at 2.5secs
  • I put a partially transparent rectangle on each fragment of text that has been set to invisible at the beginning (properties panel), marked their HL1, HL2,...
  • Created a variable user for each area of click with an initial value of 0: v_cb1, v_cb2, v_cb3...
    
  • Created a conditional action advanced for each box, used two decisions (but Then/Else was also possible), labeled them even as a click box (is possible if the click is first box). Here are the screenshots as an example of the second click box; ATTENTION: the sequence of the first and second decisions is important:
    

  

  • The Check button triggers another conditional action, where I check the variable cpQuizInfoPointsscored of system and branch to the appropriate slide. I used a slide "Correct" and "Incorrect":
  
  
  

  Lilybiri

• Bounded task flows does not appear in the dialog box

  I use JDeveloper 11.1.2.3.

  I have a jsf page, called main.jsf, which has a button that calls a workflow bounded like a dialog box.

  When the homepage is called without the extension of jsf, as https://adf-tmp.xxx.com/receiving/faces/main and the button is clicked, everything works and the stubborn workflow appears as a dialog box.

  But the stubborn workflow does not appear if the homepage is launched with the jsf extension, like https://adf-tmp.xxx.com/receiving/faces/main.jsf.

  When the button is clicked to start the flow of stubborn work, just nothing happens.

  What is the cause of this?

  Thanks in advance.

  Hello

  the reason is that you call the physical page out of context in the workflow. Because the popup is a workflow feature you must ensure that the workflow is referenced, which is not if you call the physical file only (in which case would be sent to the underlying JSf, but not the workflow)

  Frank

• Use the Click Box several times

  Hi all

  I have seen several posts on very similar topics but I'm looking for advice on my particular problem. I have a slide that contains multiple images. I would like to have the learner click images and an explanation of the image both written and spoken. I finished this ok using the standard box click a speech of fixation to the legend of success on. I would like to provide several opportunities to see the content of the learner. Out of the box, click boxes seem to work only once. I saw a few other messages that refer to advanced actions and the ability to reset the time that the object was used. Can you please direct me to either a lesson on this particular issue, or post a solution here...? I discussed intensively on the internet and found nothing so far. I use 6 Captivate.  Thank you!

  Daniel

  Very well, if you think that this question is answered, could mark you like that?

  Lilybiri

• Bean method < a4j:commandButton > backend is not called on the click event.

  I use code below. It seems back end bean method is not called when I click on the CommandButton. I think it has something to with the rendering.
  
  
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  < html xmlns = "http://www.w3.org/1999/xhtml".
  xmlns:UI = "http://java.sun.com/jsf/facelets".
  xmlns:h = "http://java.sun.com/jsf/html".
  xmlns:f = "http://java.sun.com/jsf/core".
  xmlns:A4J = "http://richfaces.org/a4j".
  xmlns:rich = "http://richfaces.org/rich".
  xmlns:CDM = "http://mportal.com/cdm" >
  < ui:composition >
  < rich: panel >
  < a4j:form id = "RefreshPropertiesInstanceForm" >
  < id of the table = "RefreshPropertiesTable" width = "100%" border = "0" >
  < b >
  < td width = "35%" align = "right" >
  < div class = 'fieldLabel' > filename property: < span
  Class = 'requiredField' > * </span > < / div >
  < table >
  < style td = "margin-top: 15px;" "padding-left: 15px ' nowrap ="nowrap ".
  align = "left" > < rich: comboBox id = "combo".
  value = "#{testPropertyRefreshHelper.selectedPropertyFile} '"
  enableManualInput = "false" >
  < f: selectItems value = "#{testPropertyRefreshDetails.propertyFileNameList}" / > "
  < a4j:support = "onchange" event
  reRender = BypassUpdates "RefreshPropertiesInstanceForm" = "false".
  ajaxSingle = "true" action = "#{testPropertyRefreshHelper.getPropertyFileContentFromRemoteServer}" / > "
  < / rich: comboBox > < table >
  < /tr >
  < b >
  < style td = "margin-top: 10px;" "padding-left: 100px" align = "left".
  colspan = "3" > < h:inputTextarea id = value = "#{testPropertyRefreshHelper.propertyFileContent"firstTextArea"} '"
  lines = "21" cols = "150".
  style = "overflow-x: auto;" "Overflow-y: scroll '.
  rendered = "#{testPropertyRefreshHelper.selectedPropertyFile! =" choose from downstairs "} '"
  Disabled = "#{testPropertyRefreshHelper.selectedPropertyFile ==" choose from downstairs "}" >
  < / h:inputTextarea > < table >
  < /tr >
  
  < b >
  < style td = "margin-top: 10px;" "padding-left: 400px" align = "left".
  colspan = "2" >
  < a4j:commandButton id = "refreshPropertyButton" value = "refresh."
  image = "#{imageManager.imageMap ['REFRESH_BUTTON']}" "
  rendered = "#{testPropertyRefreshHelper.selectedPropertyFile! =" choose from downstairs "} '"
  action = "#{testPropertyRefreshHelper.updatePropertyFileContentInRemoteServer} '"
  reRender = "RefreshPropertiesInstanceForm" >
  < / a4j:commandButton >
  < table >
  < /tr >
  < /table >
  
  < / a4j:form >
  < / rich: panel >
  < / ui:composition >
  < / html >
  
  Everything works perfectly. But when I click on the command button "#{testPropertyRefreshHelper.updatePropertyFileContentInRemoteServer}" backing bean method is not called. Other components are working properly.

  try what it says the article linked: do your session bean scope.

  NOTE: when working with Ajax I tend to do the session bean to support extended to have fewer problems with partial and such updates. If you are using JSF 2.0, you could do it view extended to get the same result.