Data warehouses do not appear on all of the hosts even though storage devices appear on all hosts

Similar Questions

• Windows 7 - date/clock will not automatically be synchronized with the internet time

  Windows 7 - date/clock will not automatically be synchronized with the internet time

  Please help me solve this problem...

  every time I can't manually change the date and time...

  If the time server internet will not synchronize the clock, select 'Change settings' and choose a different time server from the drop-down list.

• Since the last refresh of my payment for Adobe enjoy cloud data, I was not able to use the software, not Eve open one of the applications, even the payment has been made and saved to my banck account. I have been a month without service and I

  Since the last refresh of my payment for Adobe enjoy cloud data, I was not able to use the software, not Eve open one of the applications, even the payment has been made and saved to my banck account. I have been a month without service and I've not found a way to communicate directly with any responsible for Adpbe, nor received any satisfactory support of any kind. How can solve this problem? Is it possible to have a personal contact to have a personal support, instead of a jungle of pages on the web that will lead you to more of the same pages?

  The CC is waiting for bank payment, if payment is declined then CC will be suspended.

  Concerning

  Stéphane

• Windows cannot access file you will not have permission to access the item path or specified device.

  Windows cannot access file you will not have permission to access the item path or specified device.

  I have windows7 OS, I try to open any application above the display of error messages.

  Please help me...

  Thank you!!!

  original title: Windows cannot access

  another user account works fine.

  Then, your profile is corrupt.  Create a new user, copy documents and other profile corrupted on the new profile.

  Do not copy * all *-only things you have created.  (Except the shortcuts).

  Is the user profile damaged an administrator or standard user?

• My center network and sharing, says I'm not connected to the internet, even though I'm

  Windows 7 professional 64-bit.

  Just got a new modem/router DSL which is wired connected to my office.  I have access to the internet by opening Internet Explorer my network and sharing Center says that I am not connected to the internet, even though I am. There is a red cross between my computer and the internet in the network and sharing Center.  Also, on the lower right part of my office internet connection symbol has a red x.  I had a home network before this new modem/router.  Now, I can't put my home network since the system says that I have no network connection.  How can I fix it?

  Hi cpark3,

  Thank you for writing to Microsoft Communities. The problem description, I understand that you receive a message from the network and sharing center that you are not connected to the internet. Provide the following information:

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Windows wireless and wired network connection problems

  How can I troubleshoot network card?

  So, you can read this article for more information.

  How to reset the Protocol Internet (TCP/IP)

  Let us know if you need more assistance. We will be happy to help you.

  Thank you.

• Why CF CV data warehouses are not visible in VCAC

  Hello

  We have after installation

  ESX/VC 5.5 (GA)

  VCAC 6.0 (GA)

  We are able to see all the warehouses of data, local, FC, and NFS in VC.

  We have added VC as an endpoint in VCAC, but we are not able to see the VCAC CF data warehouses.

  Anyone can throw some light on it?

  Thnaks

  Jeannine

  In fact a server in the cluster could not see these CF data storages, solved the problem by removing the server from the cluster

  Jeannine

• Software installed on the data card does not appear in the menu "applications".

  I installed Ultralingua in data card in my Centro. (Data files have been great to store in the Centro himself). It does not appear in "applications".  I can launch by clicking on applications, then the files, and then find the CPP Ultralingua and launching.  Is there a way to get ultralingua and other applications on the map appear in "applications"?

  Thank you

  Hello modemjunkie.

  The Palm OS Launcher does not analyse applications of SD (.prc files) who live in the/Palm/launcher folder on an expansion card.  If you want the Launcher Palm OS stock for you to show the applications installed on the expansion card, you must press the Home button and select your card from the drop-down at the top of the screen.

  Alan G

• Charger data warehouse does not write data

  Hello
  
  I need to know which products are the most popular, I know the tables to store this information
  and ARF_QUERY ARF_QUESTION. I already have the charger running data warehouse module, if anyone knows
  Why data warehouse loader does not write data in the database, I thank you.
  
  I thank.

  The planner should treat the logs on a daily basis (by default the calendar begins charge to 22:00 and ends at 6:00). If you want to call the treatment yourself simply call the method loadAllAvailable of the SearchQueryLoader component. You can do this via the dyn/admin.

  -Andrew

• Data store is not mounted automatically after updating the Firmware of the LSI

  I've recently updated the card RAID LSI firmware on my ESXi 5.5 system (patched and update top of page)

  When I rebooted, took place the following:

  1. the associated VMFS volume RAID was mounted

  2. the data on the volume store was not mounted

  I mounted the data store manually and restarted my VMs

  Do I have to re-signing the Volume and/or the data store to raise it properly.

  Steve

  The command should be ok and do the same thing as the command esxcli esxcli storage vmfs snapshot mount -l label|-u uuid (for details, see http://kb.vmware.com/kb/1011387).

  André

• I can find driver for my dvd writer dose not work Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) _ dvd writer ad - 7530 has ata thanks

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• My Acer Aspire 9410Z (Vista) is not read my 4 GB SD card, even though I have a SD host adapter. Help?

  As stated above, it does not appear that this is on my computer. I am very confused because I have been asking this question for some time and received many answers, but none of them went around. A host adapter is different from having a SD driver? I'd like to think, it is, but I'm really, really confused. ^3^;;;

  I need to get music on my SD card for my DSi. :/ A 2 GB SD card would be better?

  Hello

  This SD card has already worked on your computer?

  Method 1: Check the status of this card in Device Manager.

  See the links below for help on Device Manager.
  
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Method 2: Try to use the same SD card on another computer and check.

• I can not get access to my serial number even though I have an electronic receipt for Acrobat Pro XI.  Help!

  Hello

  I bought Acrobat Pro XI online and received an acknowledgement by electronic mail.  When I went to download it, I was unable to complete the process, because I was not provided with a serial number.  I followed the instructions to get one on the site, however I still couldn't get a!  Immediately, a message appears indicating that I am not recognized.  My husband went from Verizon Fios Cat-5 on a coaxial cable for our internet connection between my purchase and my attempt to get the serial number.  Could he have made a difference?  Be that as it may, what should I do?  It's extremely frustrating!  I need to use the software and I have not been able to for the last two days even if I have to pay for it!  Help, please!

  Jennifer

  Thre is no serial number for a subscription. The way it is supposed to work is, you sign in with the SAME Adobe ID code and he knows what you paid for.

• Not able to connect to the host ESX 3.5 by VC so customer VI

  The host ESX 3.5 has been disconnected from the VC, and we are not able to connect customer using VI as well. The virtual machines on the host are running without any problem.

  Got the message when tried to restart/start services of Mgmt. below

  # Service mgmt-vmware restart

  stopping VMware ESX Server management services:

  VMware ESX Server Host Agent Watchdog

  VMware ESX Server host agent

  Starting VMware ESX Server management services:

  Agent Host VMware ESX Server (background)

  Availability report startup (background)/etc/init.d/mgmt-vmware: fork: Resource temporarily unavailable.)

  # Start of Service mgmt-vmware

  From the VMware ESX Server management services:

  VMware ESX servre Agent Host (background)

  Availability report startup (background)

  status of service mgmt-vmware #.

  VMware-pass is stopped

  hostd.log - entries

  /etc/init.d/sshd command failed

  Didn't the /etc/init.d/sshd fork: Resource temporarily unavailable.

  Let us know the fix for this problem other than restarting the host.

  To know how to clean it, please read KB1007887 - defunct cimservera of process on VMware ESX 3.5 hardware management agents run and follow the instructions.

  André

• Date page does not appear first drop the bar down

  Just downloaded the new ios and found that the Notification Center page appears first when you use the new bar drop down. I have to keep pulling down then drag to the right to display date apps, weather, news, etc.

  How can I configure it so that I can view the main page widget first, when you pull down the drop to the low bar and not the notification page?

  Thank you!

  Just drag to the right at the beginning.  No need to blow first.

• Data merge do not pick up all the fields of data

  Hello

  I had a problem, posted here: http://forums.adobe.com/thread/1217090

  Essentially, I used the "CSV2Tables" script to pre-populate arrays of simple column 2 with information from a CSV data source.

  The tables consist of a title and a block on this specific topic. Many of the blocks of information that I am importing also contain the tag (< < DataTag > >) data

  The plan is to use CSV2Tables to populate the tables, then change the data source and run an ID data merge to replace all < < flags > > normal in the tables with the information from a second source of CSV data.

  The problem is, CSV2Tables is important data and tables very well pre-load, but data tags that are found in each body text are picked up in plain text (as Peter Spier has pointed out, they are being requested by a plain text stream rather than drag since the merger Panel and direct mail) so when I try to run direct mail ID , none of the fields are in my document.

  My question is - is there a method, or a script available out there that can essentially do a find/replace in a document and replace the text that appears as the < < PlainText > > with a data that is recognized by ID, label that will allow me to run a data merge?

  Told me to check out some of the available commercial plugins out there, but registration and establishment of demo would force me to contact our it supplier for each, and it would be a comprehensive process.

  Any help is very appreciated.

  Hello

  As far as I know it actually takes a script to replace "plain text" with dataMergeTextPlaceholders.

  a small example;

  Array.prototype.find = function (string) {
      for (var s = 0; s < this.length; s++)
          if (this[s] == string) return s;
          return -1;
      }
  
  var mFile, mDoc, mFields, mFieldsNames, mStory, mPlainTxt, mNameToCompare, mField_ID;
  
  // edit this with proper .csv path
  mFile = File(Folder.myDocuments + "/" + "Merge.csv");
  mDoc = app.activeDocument;
  mDoc.dataMergeProperties.selectDataSource(mFile);
  mFields = mDoc.dataMergeProperties.dataMergeFields;
  mFieldsNames = mFields.everyItem().fieldName;
  
  // script assumes a text box with "plain texts" to replace is selected
  mStory = app.selection[0].parentStory;
  app.findGrepPreferences = null;
  app.findGrepPreferences.findWhat = "<<.+?>>";
  mPlainTxt = mStory.findGrep(true);
  for (var k = 0; k < mPlainTxt.length; k++) {
      mNameToCompare = mPlainTxt[k].contents.slice(2,-2);
      mField_ID = mFieldsNames.find(mNameToCompare);
      if (mField_ID > -1) {
            mField = mFields[mField_ID];
          mDoc.dataMergeTextPlaceholders.add (
              mStory,
              mPlainTxt[k].insertionPoints[0],
              mField
              )
      mPlainTxt[k].remove();
       }
      }
  

  At this point, you can run a "normal data merge.

  This should work for related managers (the one selected) or a table inside the selected image

  I hope it could be useful for more complex tasks

  Rgds

  Jarek

  Post edited by: Jump_Over ==> added media because if last statement