Advanced Forum signatures - automatic text

Similar Questions

• Can not see the Forum Signature

  The whole issue is that I do not see the image I created for one of my signatures. I find this strange but because it's only MY signature in this particular forum (the official Sims 3 ones) that I can't see. I see everyone, and I don't have this problem on another forum or website. However, I can see the signature when I look at the forum using my phone or another browser on my computer. There is this: the signature will appear suddenly after that I have post a photo in a real post, but as soon as I refresh the page or go to another, a large white space will be where my image is supposed to be. I asked others, and they all say that they can see it properly. I tried to reset Firefox, but it changed nothing.

  There have been problems reported in Firefox with images stored on Photobucket.
  
  Would be easier to host images with another image, hosting company.

  This issue seems to be caused by the default value of text/html Firefox sending accept header instead of an image request and this causes Photobucket redirect to a HTML page with the image and not the image that is requested.

  • [981195/questions/981195]

• BlackBerry Q10 Auto Signature for text Messages...

  Auto Signature is added to my E mail accounts... Now how to add the automatic Signature to the text Message?

  Thanks and greetings...

  Well sorry to tell you, that your Q10 is not the functionality.

• Copy of the generator of forms at the forum in plain text

  Hello

  When I try to paste a shape builder (6i) code, it comes inside a table in the forum, and a lot of unwanted lines is added, as well as the content is not displayed correctly. Same thing happens when I paster option in plain text.

  There is no work around for this?

  Manu.

  Unlock again that it is the correct space Timo.

  OP,

  The editor of the forum has a lot of "features", some which are beneficial and others who are a pain.

  When you copy your code on the forum it may contain tab characters and other formatted as the editor of the forum is interpreted as something that must be pasted into a table, rather than as plain text.  Is an error in the forum, but there is not much that can be made on this issue at the moment because it's the 3rd party software Forum.  The admin are looking to see if they can provide a custom in future editor to help solve many of the features that the 3rd party company seems unable to provide, but we have to wait and see when it happens.

  In the meantime, if you paste your code into something like Notepad first to remove its "behind the scenes" formatting and try that (you can for find and replace tab characters too), then to paste the best advanced a forum where you can then use the editor to set the font to something like Courier New , or use the option of formatting Code as you wish.

• Dynamic action in Apex - automatic text field display based on the definition of value

  Hello

  I have two text elements. Need to create dynamic action for what follows,

  1 Order_number

  2 Order_type

  When a user enters an order number starting at 1, the order type should type should automatically posted as CONSUMER.

  
  

  When a user enters an order number starting with 2, the order type should type should be automatically displayed as COMPANY to another display null.

  Can anyone help please have solved this issue.

  Thanks in advance!

  Hi 2932464,

  2932464 wrote:

  Please change your login username of "2932464" to something meaningful. Reference: Video tutorial how to change username available

  I have two text elements. Need to create dynamic action for what follows,

  1 Order_number

  2 Order_type

  When a user enters an order number starting at 1, the order type should type should automatically posted as CONSUMER.

  When a user enters an order number starting with 2, the order type should type should be automatically displayed as COMPANY to another display null.

  Can anyone help please have solved this issue.

  Hereby you mean something like this: https://apex.oracle.com/pls/apex/f?p=52380:11:129938442406997:

  If Yes, then create dynamic action as follows:

  • Create a dynamic action on the Order_number change event say. P11_ORDER_NUMBER.
  • Event-> change, Type of selection-> item (s), article (s)--> P11_ORDER_NUMBER Condition-> is not null
  • Real Action-> to run the JavaScript Code
  • JavaScript code:

    var ordernum = $('#P11_ORDER_NUMBER').val();
    var startdigit = ordernum.substr(0,1);
    if (parseInt(startdigit) === 1) {
      $('#P11_ORDER_TYPE').val('CONSUMER');
    } else if (parseInt(startdigit) === 2) {
      $('#P11_ORDER_TYPE').val('BUSINESS');
    }
  

  I hope this helps!

  Kind regards

  Kiran

• Automatic text feature.

  I was wondering if there is a way to disable the AutoText feature when I type a text. A few times I mistyped world the purpose of shortening the text, but it automatically corrects a completely different word. I hate the feature. I checked all the settings message and just can't find it.

  Thank you. My settings were a little different, but you pretty much there. All I had to do that was different was after...

  Menu > settings > language and keyboard settings

  I had to go into the input method and change of multitouch to Swype keyboard and that worked.

  Thanks again. Wouldn't have discovered with you get me that far.

• BlackBerry Q10 Signature in text Messages

  I just changed to the Q10 of the 9930.  On my 9930, I was able to add my signature to any message by typing 'Sig' because I saved my signature under this abbreviation.  Is it possible to define also upward on Q10?  I mean that I put it on the BIS recording there website.

  Any help would be apprciated.

  Nevermind, I figured out what to do.  I forgot that I had gone in and added a word substitution for "sig" so whenever I type "GIS" in a text is written my signature.

• Signature of e-mail for the blackBerry software: is it possible to have my signature automatically added to my emails and responses?

  Just installed Blend.

  Win7, familly edition SP1, fully updated

  BBZ10, fully updated

  Connected w/USB or WiFi

  The mixture is a great piece of software.

  Is it possible to automatically add my signature to outgoing messages e-garlic? Again, responses and transfers?

  Thank you

  Lucky Luke ;-)

  Proud owner of a BBZ10

  Hello

  If your question is about sending email through mixture? Or other means? Difficult to understand, I have to answer that in two ways.

  On the device interface, you can have a GIS of email which is auto-appliqué to every email you send. But that function isn't (again, we all hope!) apply to the use of mixture as the interface for the e-mail account on the device.

  Good luck!

• Automatic text at the end of messages blackBerry Smartphones

  At the end of every message I send from my BB, the following text is displayed:

  Sent via BlackBerry from T-Mobile

  Can I change this text?

  Thank you.

  Thank you! What you suggested did not work for me exactly, however, it at least tells me what to look for and I could solve the problem.  When I logged on Tmobile.com, I saw any kind of text to open a session as an ENCORE, even after the search of that text string.  Instead, in the dialogue of your Blackberry Curve box, I clicked on accessories, then in charge of the next page, I clicked in the dialog of resources on the right, select Set Up Blackberry Internet Email.  My email accounts both came with options to edit, add filters or Delete.  If I click on change, the signature box and I can change it.  There may be several ways to get to this screen, it's just the method that worked for me.  Thanks for the compliment "handle" too!

• BlackBerry Smartphones how can I change my signature & other texts on my outgoing emails sent from my mobile?

  When I bought my Blackberry Torch 9800 (2 years), I managed (somehow) add text by giving my name, my 2 companies Web sites & so that it appears at the bottom of every outgoing e-mail.  At the same time, I've removed the text that says something like "message sent from my Blackberry".

  Now I need to change the message (& also want to restore it's my Blackberry because it is what explains a brief answer when necessary.)

  I don't think that I did all the settings on the mobile.  I think that this has been done "somehow" on my main computer.

  Any ideas?

  Thank you

  Hello christinebennett

  Please refer to this Knowledge Base to change your signature.

  KB29458 : How to change the signature for an address of electronic mail on a BlackBerry smartphone

   

   

  Good luck.

• Correction of automatic text of blackBerry Smartphones

  When I type a word on an e-mail or a text message that is not in the dictonary units, the phone tries to suggest a word he thinks im trying to type for example when I tape "chippy" the suggested word is "rough" I don't want to use, but when I press the button space phone change automatically in "restless".

  I tried changing several things and can not know to stop this without losing the suggested word cause my spelling is not the bast and could do with it!

  dicko69

  Nice action, CHEERS!

• Automatic text of blackBerry Smartphones

  How and where can I create August text for my Blackberry 8900? I would like to try this for power but a signature on my text.

  Does anyone know if it will work?

  Jodster

  Yes it will work (I don't see the point in it...) SMS (SHORT Message Service) is intended for short messages, and a signature that goes against. Someone that you send a text to know who it's from.

  Options > AutoText.

  Good luck.

• Auto signature for text messages blackBerry smartphones

  Does anyone know if it is possible to have an auto signature on SMS?

  I'm not aware of such a feature in the basic text messaging app.  AppWorld has many applications related to text messaging and look under IM & Social Networking > Instant Messaging could give some results.

• How to create an automatic text field - has a date of three years from the current date?

  I'm trying to create a PDF form that is automatically entered a three-year expiration date in the future of the current date in a created text field.

  Text field name: ExpDate

  Text field format: mm/dd/yy

  So far, I entered in the following in the Page Properties-> Actions-> Add Action (trigger = Open Page, Action = run a JavaScript script):

  var ExpDate = new Date();

  ExpDate.setYear (ExpDate.getYear () + 3);

  var f = this.getField ("ExpDate");

  f.Value = util.printd ("mm/dd/yy", ExpDate);

  We will attend the correct expiration date the day where I do the certificate (i.e. There will be 07/06/16, June 7, 2016), but when I open it the next day will be always ready 07/06/16 instead of 06/08/16. I'm sure it is something simple that I need to change. Any ideas?

  If she says ' 07/06/16"on 7 June 2016, which means that it does not work properly, either, as it does not add 3 years to the date of the day... It should show ' 07/06/19.

  You see error messages in the console (Ctrl + J) JS when you open the file?

• Automatic text in the form resizing does not work

  I've recreated just a form to fill in Acrobat Pro ms. In the past, I was able to have the police automatic resizing if the information is too long for the size of the test to white. I have the font size set to "auto", but it does not automatically resize when filling in text as it was in previous versions. Is there something else I should do to get there?

  Thank you!

  You must make sure that the option "Allow formatting rich text" under Properties - Options is disabled.