Advanced Signal Processing Toolkit and cRIO

Similar Questions

• Unknown device named "PCI data acquisition" and signal processing controller in Device Manager

  Greetings,

  Yesterday, my brother, who was running Windows 8.1 Overview on his Asus S400CA Ultrabook fell on a big problem of the NTFS partition corruption that made it impossible to recover through the Refresh Utility Windows 8.1. Given the situation, my brother decided it was better to go back to Windows 8, I had to install Windows 8 on their PCs by using an external DVD drive with a Windows 8 x 64 installer I already buy plenty of detail. The computer never asked me for a product key that I have read is normal in Windows 8 PC now having these embedded in the motherboard. So far an installation smoothly, but he's going to be delicate in the part of pilot facilities. Before you remove the computer I went to the Asus website and did my best to find the specific drivers for my brother's computer and downloaded the key drivers, chipset, audio, intel graphics card, bluetooth, trackpad Wireless LAN, LAN and Asus and installed. I used Device Manager to check that the drivers have been installed and which did not exist. I was able to get most of the drivers installed properly, however, said the Device Manager miss me the pilot of "Data Acquisition and Signal Processing controller PCI. Unfortunately I go to Asus website to see that if I can find the driver however, I can't do this right now.
  Check the attached screenshots for visibility...
  
  
  I also tried to use Windows Update to see if he could find the correct driver and unfortunately it's a dead-end. Because of that I write in this forum to see if someone can point me in the right direction when it comes to this missing driver (and others) indicated in the Device Manager.
  One last thing that I would ask is if I can use a utility like DriverMax to find missing drivers or should I go and install it manually?
  Thank you very much in advance for any help on this matter.
   
  Original title: cannot find drivers for Asus S400CA Ultrabook PCI

  Hi Mike,.

  Please keep us updated on the status of the issue. Please do not hesitate to answer, in case you need help with Windows in the future.

  Good,

  ASUS technical support according to my brother was a bit of a dead end, so I went to another Google search and found the culprit. I was missing the following drivers of ASUS:
  • Intel® dynamic and thermal platform frame driver
  • ASUS Wireless remote control (a driver for you to enjoy the airplane mode (Wireless) On / Off)
  The first pilot took care of the Acquisition of ICP data and Signal Processing controller and all but one of the unknown devices. Finally, the other took care of the last unknown device in Device Manager.
  I never thought that ASUS would use this a strange name for their driver because these names are extremely misleading.
  Other than that, I can finally say with certainty that the computer of my brother is back in business, and I can call this comprehensive process of restoration of Windows 8.
  Thanks for any assistance to Zaki J, I appreciate much all advice through this process!

• Laptop 15-AD129DS: installed Win7 on 15-AD129DS-lack of Driver: Acquisition of PC data and Signal Processing controller

  I recently installed Windows 7 on my laptop HP 15-AD129DS.  In the Device Manager miss me the driver for PC Data Acquisition and Signal Processing controller.   There is also an unknown device without driver right below in the section "other devices."

  I understand that this ususaly installed with drivers from the chipset.  But it didi not install in two different tests when installing Win7.  The Intel site seems to be of no assistance, or their driver utility.

  Can you lead me to the correct drivers?

  Thank you in advance,

  Mark

  Hello:

  Have you tried this driver?

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75506.exe

• HP 15-r212nv (Energy Star): acquisition of ICP data and Signal Processing controller

  There is a device in the device manager that recognizes my phone and I can't find drivers! Acquisition of ICP data and Signal Processing controller.  I searched the web, but nothing.  My laptop is HP 15-r212nv model and I'm under 64-bit Windows 10.

  Thanks in advance

  Hello:

  See if this driver works...

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71262.exe

• PCI Data Acquisition and Signal Processing controller driver

  I installed win 8.1x64 on my HP Probook 450 G2, but miss me the driver of PCI Data Acquisition and Signal Processing controller.

  Can you please help?

  Thank you

  Leontina

  Hello:

  Please see if installing the Intel Chipset driver installs this device.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775 & lang = eng & ProdId = 816

• HP 240 G4-328TX: need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition

  Hello

  Need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition

  Can anyone provide me please the link for download it for windows 10

  Thank you

  Hello:

  See if this driver works...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609938 & swItemId = ob_153701_1 & swEnvOid = 4192

• 15 - ac122tu: PCI of Data Acquisition and the controller driver of laptop HP 15-ac122TU signal processing

  Hi team,

  I just install windows 7 edition integral and peripheral Bluetooth windows 8.1 is not be detectable, when I search for problem that I came across this PCI data acquisition and Signal Processing controller driver is missing and a unknown device driver missing shownup in my result of troubleshooting. Please help me

  Please find the screenshot for your reference

  Thank you

  

  Hello:

  See if these drivers work...

  CQI PCI controller:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the heat of the system
  protection to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71638.exe

  Bluetooth:

  This package contains the installation package driver for Realtek bluetooth in the laptop models running a supported operating system.

  File name: sp71288.exe

  Unknown dev:

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• 15 - r235ne: SM bus controller / IBD DATA Acquisition and Signal Processing controller

  Hello team

  I am facing problem in finding the right driver for material below.

  1 SM bus controller

  2 IBD DATA acquisition and Signal Processing controller

  kindly help

  concerning

  NASIR

  Hi, Nguyen:

  Download and install the Intel chipset installation utility and restart the PC.

  The 2nd driver down on the left is the automatic installation file.

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-?product=1145

• HP EliteBook 840 G3: Impossible to find acquisition of ICP data and Signal Processing controller, memory controller, PCI and SM...

  Hello

  I can't find acquisition of ICP data and Signal Processing controller, memory controller PCI bus controller SM for HP EliteBook 840 G3 running Microsoft Windows 7 Enterprise (64-bit).

  Any help is greatly appreciated!

  Hello:

  See if this driver works...

  FTP://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74152.exe

• HP laptop - 15-ac022ne: pci of data acquisition and signal processing controller

  I have this laptop HP - 15-ac022ne and I got windows 8, evrything has not been totally perfect until I upgraded to windows 10, wireless function no longer works, tried to install the driver and update, it was succsessfully installed in the machine to say, but still not working and PCI data acquisition and signal processing controller driver is missing tried to download the chip set on the driver support page, does not, tried to update the driver through the Device Manager and the message can not find a driver for the device of said...

  Please I need help...

  Hello:

  You need this driver for pci data acquisition and signal processing controller.

  FTP://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72069.exe

• HP 15-AC-650tu: pci of data acquisition and controller hp windows 7 15-ac-650tu of signal processing

  After installing Windows 7 64 bit on my new laptop, HP HP 15 - AC - 650tu, in Device Manager, I see that the following drivers are not installed properly.

  -Ethernet controller

  -Acquisition of ICP data and Signal Processing controller

  -SM Bus controller

  I tried to get the drivers for this HP laptop, but unable to do so. can anyone help please.

  Thank you very much!

  Kind regards

  Mukul

  You are the very welcome.

  Have you installed the Intel graphics driver?

  It would be the only suggestion I can offer.

  In addition, installation of this software that allows some of the Fn keys to work.

  This package contains the HP System Event Utility, which allows the special function keys on the laptop to program models. For example, HP System Event Utility allows users to press the Fn + ESC keys to view system information. This package is provided for the supported models running a supported operating system.

  File name: sp76383.exe

• Signal acquisition of voltage AC using NI 9206 9205 and cRIO

  Hello.  I have difficulties accurately acquire a signal voltage AC using a module OR 9206 and cRIO.  I'm looking to acquire signals of tension of the two types of current transformers Magnelab: divide the rope and the base.  In Labview, I first fill out an array of size 2 500 with the signal of the sensor (DIFF mode), and then calculate the RMS of the table.  For the core of split CTs, I'm able to acquire exactly reading the correct voltage (verified by measuring the match on the line using a power Analyzer Fluke 434 amp.  For the CT string, however, using the same method of table/RMS, I am unable to gain precisely the correct voltage reading.  Measure the amp on the line using the Fluke 434 PA, good the CT string tension should be 0.05v.  Using the 9206 (DIFF mode), the RMS of the array gives a reading of 0.071 voltage.  Now the interesting part is when I measure the voltage by using two different True RMS DMM, I get two different readings.  A multimeter, a Klein CL2000, reads the voltage in 0.05v.  Other multi meter, a Fluke 189 reads wrong to 0.071, the same that I get using LabView and NI 9206 release.  I guess the question is how the Klein interprets the signal differently Fluke 189 and the NI 9206 via LabView module.  A difference between the split-core and rope CTs, is that the rope CTs require a power external power supply 12-30 v AC or DC.  I'm providing 12v DC.  I tried several AC and DC voltages and still get the same wrong result.  I am quite sure that it is not a question of power supply, although perhaps the integrator in the rope is the creation of a single signal.  Any ideas?  I appreciate any input.

  Thank you

  J.Grant

  AK2DM:

  Update - found solution

• HP laptop - 15-r247tu: need driver for PCI and Signal Processing controller HP 15 Data Acquisition - r247tu

  Can't get the driver for the Acquisition of ICP data and Signal Processing controller in my r247tu 15 HP notebook. I am using Windows 10 computer. Please help me.

  Hello:

  Try the chipset directly from Intel driver... the second file is the auto install file.

  https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-

  If this driver does not install the Acquisition of ICP data and Signal Processing controller, must install the chipset driver, download the first file listed above (zip file).

  Unzip and extract the contents in his file.

  Go to Device Manager and click on the above device needing driver.  Click the driver tab.

  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the unzipped driver folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

• Laptop HP 15-ac118tu: pilot unavilable for PCI Data Acquisition and Signal Processing controller

  Hello

  I use Windows 7 Ultimate Hp Notebook model ac118tu. In Device Manager, it shows the yellow mark to the Acquisition of ICP data and Signal Processing controller (the name that appears twice).  What is the use of this controller?

  Yellow mark means that I need to install the driver for this. Please share the link to the installation of this driver.

  Secondly, I want the drivers for the webcam as well. Please share.

  Hello:

  You need the driver for this device...

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the heat of the system
  protection to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71638.exe

  For the webcam you just install this software.

  This package contains the CyberLink YouCam software for laptops models and operating systems. CyberLink YouCam is an application webcam that allows users to capture images and video from a web camera and apply visual effects for video and captured images.

  File name: sp71830.exe

• Missing PCI Data Acquisition and Signal Processing controller drivers

  Hello!

  I have a problem with my Inspiron 11 3148
  Service etiquette: CSFND32

  A few weeks ago, I did a clean reinstall of windows 8.1 using a .iso downloaded from microsoft technical support and put in level to windows 10 in a short time after.

  I don't have my thumb drive installation, where the microsoft .iso image file.

  Since then do a clean install, I had a few questions I'm going to break my best.

  1. lack of drivers for unknown devices & a PCI data acquisition and signal processing controller.

  I had some problems with wifi, so I looked in the Device Manager to check if my card needed a driver update and discovered several other device driver errors, which cannot be resolved by using windows update. The card wifi itself says it is updated.

  

  I tried to use the dell service detect downloaded applet on the page of the Dell driver IE, but it does not seem to function.

  If someone can identify what (s) I might need for these unknowns that would be fantastic.

  2. Wifi issues, perhaps in connection with the missing drivers above.

  -Sometimes does not detect networks.

  -Sometimes cannot connect to the internet when it is on my home network.

  -Is not able to connect to weak points where before he could.

  * Reset the network adapter in the network settings fixes detection and connectivity issues, but does not improve the detection of signals in weak points *.

  3. high (100-96%) HARD drive load for a few minutes after start high and very occasional errors "in areas not paginated page failure."

  -J' lived load disc high enough the last time I got the upgrade of 10 windows the first time, requiring often 5-10 minutes to settle at startup

  -Second time around, I always get high disk load, but it is not too long. The upgrade fee is very 'light', I have very few programs installed and even less to launch at startup.

  -Defects of Page seemed generally coincide with me shortly after you start using Google Chrome. I now use firefox instead and have known only one mistake so far since the permutation

  * I used the windows disk check and ran chkdsk /r for longer check disk to reboot, but both are no problem with the drive *.

  Ok... So usually after I finished writing this post, I came across a solution for the number one problem while browsing the microsoft answers forums.

  I downloaded and installed a driver for the Intel platform dynamic and thermal framework.
  -This solved my problems of missing driver.
  -J' rebooted several times and I am not also problems of wifi the day other than the problem of low task, but what I'll take it!