I need your urgent help

I need help to solve a problem, I met when working on a laptop of Omatek that had a problem starting. So I decided to format, but the CD ROM drive had a problem so I decided to format it with a computer toshiba laptop, install the same operating system that was windows XP and it worked, but it created another problem when I took the hard drive of the laptop Omatek bak, he refused to start completely as it will start the start and turns off because it displays an error message that he met a problem. So I decided to fix the CD ROM drive in the laptop of Omatek to reformat, but every time I start the sytem and try to format, it will tell me that it cannot find any disk hard even if my configuration also shows that it clearly identifies my hard drive and the CD ROM drive

The Windows installation CD is ill-equipped to deal with SATA drives, and this is why it does not recognize the HARD drive.

You will need to enter the BIOS on the system and temporarily change the access mode to the HARD drive to something that includes the installation of XP CD, install your XP, then you can change the BIOS settings back to what they were before you changed.

This means that if you make settings of the BIOS, you must write them, so you can change them back.

Here are my instructions for general use for these situations:

When you see messages like this:

Setup cannot continue.  To quit Setup, press F3.

or

Setup did not find any hard drives installed in your computer.

Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct.  This number involves running a diagnosis provided by the manufacturer or the installer.

When you see a message like this, obviously the XP installation starts to load, but then when the installation program needs to go out and find your hard drive is not find the hard drive.  It means not necessarily your hard drive is defective and if it worked before, it's probably still plugged.  It simply means that the installation of XP is not able to find it.

Looks like you need enter the BIOS on your system by pressing the 'Delete', F2, F10 or F12 key (what the key is good for your system), find the section where the types of hard disks and hard disk interfaces are configured and temporarily change the setting so the XP installation is able to find the hard drive.

Where to find the accommodation and how to change depends on your system manufacturer and the version of the BIOS, so you end up having to look at her.  If you know your system brand and model, we can probably help you find a job.

You must locate and change the interface mode to your hard drive in the BIOS so that when installing XP loading, it will be able to locate the hard drive.

Before making adjustments, you should take note of what are the current BIOS settings, so you can change when you are finished.

The adjustment varies so here are some examples that I have accumulated:

The adjustment is done in the BIOS and could be in Integrated Peripherals, Configuration of SATA, SATA Mode device.

Make a note of what the current settings are so you can change them back if things get worse before making any changes.

After you make the changes, save them and see how things look now.

If you find that the mode is set on the RAID/SATA mode, change the IDE mode.

If you find that the mode is set to SATA, change the IDE mode.

If you find that the mode is set to SATA, SATA mode off.

If you find that the mode is set to AHCI, change the ATA mode.

If you find that the mode is set to AHCI emulation Mode, change the IDE emulation mode.

If you find that the mode is set to SATA, SATA mode off or change the ATA mode.

If you find that the mode is set to SATA Native Mode, disable the native SATA Mode.

If you find that the mode is set on AHCI/RAID Autodetect, change the combination mode.

If you find that the mode is set to automatic RAID/AHCI, change it to RAID Auto / ATA

The WWW says it works on some Dells: "I had to put my SATA ATA instead of AHCI operation."

After completing the settings, ACCEPT and SAVE changes and reboot the system and see if it will now boot on the CD from Recovery Console.

Here are some additional ideas on changing the BIOS to recognize the SATA drive to boot and install from CD:

http://www.mydigitallife.info/common-troubleshooting-methods-when-OS-install-unable-to-detect-SATA-harddisk-drive/

Tags: Windows

Similar Questions

  • Pls need your urgent help - DVD player is broken

    In my laptop LG was broken device, model - Toshiba sd-r9012 DVD-CDRW, it has only 9.5 mm thick, ultraslim, and I can't find the place to buy it in Moscow.
    Would you like to sell me this device or compatible with it devices (dvd - rw or dvd-cdrw internal) advice?

    Best regards
    Evgeniy Pavlov

    [Edited by: admin August 20 05 14:13]

    Hello

    You can contact the SAV Toshiba partner in Moscow. I'm sure they can order this disc for you. Otherwise you can contact the manufacturer of the laptop computer and ask them which drives are compatible with it.

    Check out these pages
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true
    http://www.Toshiba-Europe.com/EU/contact/details.asp?group=by+country

    Good bye

  • Adobe Acrobat Pro DC: impossible to validate the serial number. [was: NEED of URGENT HELP]

    I recently bought Adobe Acrobat Pro DC ( order number: 12152877759) for Mac. I followed the steps to download the program. When I got to the page of the serial number in the installation steps, a yellow massage appears at the top of the page with: «we are unable to validate the serial number of Adobe Acrobat.» PLS, contact Customer Service"before I get the serial number. When I entered the number sent by e-mail at the front desk, the same threshold of top massage of the page without any progress.

    I have tried several times to uninstall all files related acrobat, reboot the system and download the program of link Download Pro or Standard versions of Acrobat DC, XI or X But same problem repeated itself. I also changed my Adobe account & used a new and still the same problem accrued. I have raised the issue of yesterday & had been connected with meenakshin83966505 Employee throughout the day without any solution progress & it you end up with this massage (if you get the error message, you must Contact Customer Services.) Sign in using your Adobe ID and then select your product from the list. Then select chat option under "still need help? Contact us"). Since last night, so far I have had no response or connected with someone to help solve this problem.

    I paid US $ 450 to buy this product and can not use it to unknown and no problem supported with it!

    I need to get an answer, how to solve the problem and that the program works. or els I have to repay my payment. Fast action is much appreciated.

    Thank you

    Hi Rajshreeb,

    They have already called & solved the problem online. It was really very useful.

    Thank you very much for your positive support, I really appreciate it.

    REDA

  • Need your expert help...

    Hello

    Untitled.jpg

    The screeshot above shows a gap. At the top of page 2 (front), there is a permanent single line of the paragraph on page 1 (arrow in attachment). I need a script to identify such cases throughout the document. It is possible find and alert pages use this kind of orphans by Javascript. He was aware of a paragraph if single line comes in the document.

    I'll take the no. page 1 lines and can compare with page 2, if all lines are from page 1, then count the lines, whether it will be greater than 1, then alert orphan. Maybe that's what I think about it for the script.

    I expect a solution to this problem on your part.

    Thanks in advance

    Hmm, works very well for me. Either your document contains something that I have not taken into account, it is related to the changes made between CS5 (you seem to be running) and CS3 (which I am still on) which would be difficult for me to solve the problems. Oh and the new code replaces the old code entirely, do not put the old and new versions in the same file.

  • BlackBerry smartphones, I have NEED of URGENT HELP *.

    MY BLACKBERRY 2 HAVE THE SAME PIN, AND I NEEDED LUCK FORMER BB PHONE PIN CODE TO A NEW... HOW CAN I GO?

    Two devices cannot share the same PIN. Each device is assigned its own unique PIN code before leaving the factory. If you have two devices with the same PIN, one of them is a counterfeit device.

    See you soon.

  • Need urgent help with the startup of the database

    Hi all

    I use oracle 10g on 32 bits of windower server.

    I try to start my database today and it gives me error, and that's my production database.
    I need very urgent help you. (I have no rman backup, and data are not n6cessoires so, since it is the practice of the student).
    SQL> startup open
    ORACLE instance started.
    
    Total System Global Area  524288000 bytes
    Fixed Size                   790180 bytes
    Variable Size             250343772 bytes
    Database Buffers          272629760 bytes
    Redo Buffers                 524288 bytes
    Database mounted.
    ORA-01110: data file 34: 'G:\ORACLE\DATAFILES_ACADEMY\ACADEMY'
    ORA-01115: IO error reading block from file 34 (block # 1)
    ORA-27070: async read/write failed
    OSD-04016: Error queuing an asynchronous I/O request.
    O/S-Error: (OS 23) Data error (cyclic redundancy check).
    Kind regards.

    Maahjoor wrote:
    Hi dear,

    I need further assistance on your side, I restarted the server, but the same problem.
    as there is a way to drop and re-create a system tablespace? given that the 34 file belong to the tablesapce system.

    concerning

    N °
    So just create a new database. Who will have every ten minutes. And to say that your students to create new storage spaces. Who will be the two minutes.

  • Please, I need urgent help. I can not install applications, the site says I have not produced, but I pay every month!

    Please, I need urgent help. I can not install applications, the site says I have not produced, but I pay every month!

    Hi Jose % 20Dieciseis,

    I checked your account via email that you used to register on the support Forum, it shows not all subscription registered on your Adobe account.

    could be a possibility that you used an e-mail to subscribe to the composition.

    If there is no trouble finding that-

    Please contact Adobe customer care http://helpx.adobe.com/contact.html

    • Remember that you are logged on the page with your Adobe ID.
    • Select your product and what you need help with
    • Click on the blue box "still need help? Contact us. "
  • Hi, I paid the subscription to muse, received confirmation 7 hours ago, but the subscription is only showing on the site not on the creaitve cloud. I need urgent help for a period

    Hi, I paid the subscription to muse, received confirmation 7 hours ago, but the subscription is only showing on the site not on the creaitve cloud. I need urgent help for a period

    Hi Se80799442,

    Adobe trial and purchased applications are same, if you are showing that the trial has expired it would be a mistake to solve this, you can check the link below:

    ( Make sure you use the same Adobe ID / Email ID that you used to purchase the subscription )

    Download the creative application of cloud from here: Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

    Connect and disconnect activate Cloud Creative applications

    If it does not help him follow the link below

    Adobe Creative Cloud apps back in test mode after 2015 set CC to update

    * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it then just turn off the firewall for awhile disconnect you and you connect on the creative application of cloud and check.

    Let us know if that helps.

  • Unable to open gmail and other google account services. Need urgent help. Firefox version is 29.0.1. Erasedeverythingcache/history + reset without addons.

    Unable to open gmail and other google account services. Need urgent help. Firefox version is 29.0.1. Deleted all cache and history + wiped without addons. Urgent help please. Same problem in other browsers ie opera/IE. Other Internet sites without problem.

    Personally, I've never had problems with ABP, but questions about ABP would be better answered in the AdBlock Plus forum where there are people more suited to respond as we only deal with technical support from Mozilla (e.. g the Fx of Firefox, Thunderbird, for Android)

  • Yahoo mail compose page announced the Indian Railways. Same is the case with some Gmail site. For this reason, it is difficult to compose mail. I need your help to clear advertising so that I can compose mail on the blank page, cordially. Maes

    Yahoo mail is normally empty. One can type mail in the blank part of . In my case the Compose page has rail logo. because I can't type my mail. Even if there is no problem in gmail-INBO isn't the case with Gmail site "A Google approach to email" or make up may site.
    For this reason, it is difficult to compose mail on yahoo mail. I need your help to clear advertising logo so that I can compose mail on a white page, cordially. eldiablo kumar

    You can also try to install Adblock Plus with Easylist subscription and check

  • yesternight I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please

    Yester night I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please.

    Seems that Apple has temporary problems with their activation servers. Many users report similar problem on older devices.

    Latest news: If you can not activate your iPhone, iPad, or iPod touch after installing iOS 9.3 - Apple Support

    r http://www.IMore.com/Apple-Working-iOS-93-Fix-Older-iPhone-iPad?utm_medium=Slide & utm_campaign = navigation & utm_source = im

    lder-IOS-devices-affected-by-bricking-bug/ http://9to5mac.com/2016/03/24/Apple-releases-New-Build-of-iOS-9-3-for-Users-of-o

    Hoppefully Apple will highlight the top soon.

  • buy an iphone 5s by amazon and I came with iCloud blocked an account... {I called the seller and does not that I do that I'm from Venezuela please need your help}

    buy an iphone 5s by amazon and I came with iCloud blocked an account... I called the seller and does not that I do that I'm from Venezuela please need your help

    No one here can help you. The device is locked activation. Since you have made the purchase by Amazon, you can check with them to see if they will stand behind it. No one on the forum, or Apple can help you remove the lock. Only the previous owner can do this. I suggest that you demand a refund, so let's start a claim with Amazon about this dealer.

  • Please I need your help in the next issue.

    Please I need your help in the next issue.

    I'm trying to change a driver of function generator to perform the following operations:

    starting with the initial value (for example 1 MHz) for some time (for example 10 sec.) and turn off the output for another time (e.g. 20 seconds) and then start again but this time with the frequency increment value (for example 1 MHz + 0.1 x n MHz = 1.1 MHz for n = 1, 2, 3,... n).

    The function generator model is ag33xxxGPIB and the link of the driver is http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9066659CE034080020E748...

    There is no modifications are required for the driver, although there might be an example that you can edit. You use the function of the frequency set in a loop with a shift register. Initialize the registry to offset with the frequency of your departure and each iteration of the loop, add the value of the step. Exit the loop when the stop frequency is reached. Try to write something and after back if you have any problems. Fix what you wrote.

    It's pretty basic LabVIEW code. Did you do the online tutorials?

  • Pavilion 15-n200nx: I need your help

    Hello group HP I need your help on activatin windows I update my laptop for windows pro 8.1 build 9600

    but is not yet activate every time I open my computer laptop theres always notification that I need to activate my windows

    notification require a product key... I have need of your immediately

    Thank you.

    Hello
     
    The key is in the BIOS of your machine, please use the following tool to get:

    http://www.Belarc.com/free_download.html

    When running this tool, it produced a report, scroll to the section of software management. Product key Windows 8 or 8.1 is there.

    You can also use the following tool to discover:

    https://www.magicaljellybean.com/KeyFinder/

    Kind regards

  • I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

    I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

    Hi ddbowers01,

    The other shortcut keys work?

    Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

    Check the setting below:

    a. in the Control Panel, click user accounts.

    b. click on change the way users log on or off the power.

    c. Click to uncheck use the screen of welcome for a quick and easy connection.

    d. click OK.

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Error when you work with Devicenet in cRIO

    Hello I am trying to use codes for example for industrial Communications using DeviceNET. I have the 9882 OR on a chassis NI 9114 and 9014 controller. I have all the drivers for DeviceNET, RIO, Realtime/FPGA, ect. When I try to run any sample project

  • Bing Maps Australia does support American mapping. If so, performance depends on the distance between MS data centers in the United States?

    Some countries of Bing Maps support US better than others mapping... just trying to figure out why the same address would generate different responses in different countries...

  • Make XP P2P shared folders

    I have two computers on a network using the P2P architecture.  I created shared folders on both computers.  Why only administrators can access the two shared folders on XP? Users generally are able to see one way the two will not both.

  • LDAC on Xperia Z3 technology

    The Indian model of xperia z3 D6653 does support Sony LDAC bluetooth technology? Anyone please respond. IAM planning to buy Sony srs x 55 bluetooth speaker. That supports the LDAC bluetooth technology.

  • WUSB54GC rev.1 failed on Windows 7 x 64

    Hello I installed Windows 7 x 64 and used my WUSB54GC rev.1 with Windows drivers by default, until... I moved it to the other USB port. Windows could not find the drivers. I tried a lot of things. The native drivers on the disk, installed the drivers