Advice needed w / BlueScreen crashes & other questions

Similar Questions

• Vista bluescreen crash dump stop error 0x0000008x

  I didn't know anything help for my bluescreen crash dump error stop: 0x0000008x (0xc0000005, 0x82056FA6, 0x8c08BA24, 0x00000000)...

  also very often my screen freezes and I get a black screen.  I have to manually restart my time computer serveral before I get to where it works again.  None of the info in that I looked is very useful.

  Ideas, suggestions... don't want to use because of the entire installation and updates restore point that I did was done through online.  Too much work involved to get all updates re-installed.  I have Vista Home Premium 32 bit, HP Pavilion a6130n.

  Thank you

  Teresa

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...

  
  

  You can learn more about BSOD here

  You will learn how to test your memory here 

  
  
  
  
  Team Zigzag3143.com  

• Advice needed: 11.1.1.5 or 11.1.1.6?

  We have a situation where our systems of production/acceptance are WLS 10.3.5
  I, as a developer was not aware of this and I have developed in JDeveloper 11.1.1.3 because our testmachine is WLS 10.3.3. We cannot upgrade this because the forms will also run on this machine and the customer is unwilling to upgrade forms. Playoff acceptance/forms on a WLS so different, it is not a problem.
  We decided that for now developers will modernize JDeveloper to develop to WLS 10.3.5 (and I think that ADF 11.1.1.5) and jump to test until the new machine has been installed.
  
  My question is: is it advisable to install JDeveloper 11.1.1.5? I read on a major bug (notes 1321896.1) and I also downloaded the patch for it. I can't install 11.1.1.6 but as facilities in case the 10.3.5 existing should also upgrade, I'm wrong?
  
  My other question is: the ADF-version on the WLS 10.3.5 has this bug as well? We have not run into this because we have no restorations still in production, but we go to the next request. Should it be corrected?
  
  Anyone can answer these questions?
  
  Thank you!

  Wendy,
  Apart from the information you already have can I add the following:
  If you want to use 11.1.1.5.0, you should patch. I'm sure that you hit the bug mentioned in the near future. It is not sensible don't not patch you need to test your applications in any case if you upgrade to another version.
  I would use 11.1.1.6.0 and jump 11.1.1.5.0. I can't think of a reason to go only to 11.1.1.5.0. You will miss some features again introduced in 11.1.1.6.0 in this way.

  As I said before you can test your applications under the target anyway. Simply recompile them and see what happens. I guess, as you just 11.1.1.3.0, you will see some compile time issues. There are certain things that have been authorized in the 11.1.1.3.0 which are now (11.1.1.1.5.0 or 11.1.1.6.0) reported as errors. We found some differences in drag them and drop behavior (can't find what exactly this time) and some of our special components needed an overhaul. In summary, you will need to do a throughout the testing of applications anyway.

  For the side server, I suggest to install a WLS 10.3.6 and the new ADF 11.1.1.6.0 runtime environment. Keep all version numbers.

  Timo

• I need to reset my security questions of my apple ID

  I need to reset my security questions of my apple ID

  If you have forgotten your security questions, you will need to make sure and contact Apple for resetting your security question! Here is the link where you can contact them to resolve the issue you are experiencing.

  https://support.Apple.com/en-us/HT204169

  OR if you are unable to call because you are not located in one of the countries mentioned in the link above, feel free to fill out and send it to them in this way, you are on the road to get reset your security questions

  Make sure you be patient! Here is the link below for the form.

  https://www.Apple.com/EMEA/support/iTunes/contact.html

  You can also try to visit this page to see how reset your own security questions, however if this option is available to you, you will need to follow the links above.

  https://support.Apple.com/en-us/HT201485

• I need to reset my security questions

  Hello..

  I need to reset my security questions, because I'v define the answers five years ago and I forgot them.

  But the choice in my Apple ID account (forget your answers? send reset email security info to... com)...

  is not displayed! so, what can I do?

  I really need to reset my security questions

  Thank you

  If you get the reset link to your account, then you don't have an e-mail address of relief on this subject (a secondary email address is different), you will need to contact the Support of your country for the reset of questions: Contact Apple for the Apple ID account security support

  If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html

  When they have been reset then you can add an email address to relief for possible future use: manage your ID primary Apple, rescue, replacement and notification e-mail addresses

• I need to find my secret question answer

  I need to know my secret question I know my password but ive forgotten how I wrote my first dogs name and the reason why I need it is ive for had my password emails business because it was on automatic connection until someone he messed up I really need his urgent because the secret answers are the same

  Hello

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  Also see link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Fan replacements + other Questions of material

  Well, I got an error message when starting today on my fan having problems. I noticed very high temperatures, with the fan being fort/loud in general. It is a renovated Pavilion dv6 6185nr

  It is not initially loaded running Windows 7 64 bit, instead, it now runs Ubuntu Linux LTS 13.04.

  Nothing was changed to what is material. Software wouldn't this effect, but once more the BIOS/boot detects a problem.

  In any case, this form factor is what? Can what type of replacement I get? Any recommendations? How to open this thing up to change the fan, or to all the least clean?

  Hello Lepetitdoudou2010,

  I understand that you are wanting to change your fan, is that correct? I'll try to help you.

  Here is the Service Manual for your DV6, instructions on the removal of the fan are on page 91.

  This is the part number for the fan that fits your system. (640425 001)

  I hope this information is useful, let me know if you have any other questions.

• Adobe Flash and other questions about Flash crashes

  There are several cases of Adobe Flash crashes if I use Firefox, IE or Google Chrome - browsers and simply reload the page corrects this BUT repeats again and again.

  I am running Windows 8.1 64 bit in which the Flash program comes apparently integrated in the operating system as a hybrid 32/64 bit. When I inspect the add-on version Flash in Firefox, and an audit of the update, Adobe points out, correctly, that my system is 64 bit, English, Firefox Windows. Then when I do the same thing in Windows Internet Explorer, by checking the version shipped, I get a message that KB2999249 is available as a download fix Flash problems in Internet Explorer. Since this installation, the Flash has collapsed in IE [yet].

  So my question is: How can I be certain that when Firefox reports that Flash is "day" that he is indeed a version 64 bit compatible? Note that the download from Adobe site identifies only one version available for Firefox, IE and Google - the current version is the 15.0.0.152 file: NPSWF32_15_0_0_152.
  The "32" in the file name part suggests that it is a 32-bit application and, if so, where can I find NPSWF64_15_o_o_152 [if exists]?

  edited the title of this thread to reflect questions

  I check my addition of the Manager of ons regularly, even obsessive. I still have the last flash.

• Advice needed on improving the system

  Forum of expensive equipment,

  I built a computer 5 years ago (mainly based on the advice of evil ) who has worked for me since then. However, I just built a system (small) (I5, MB: 6.0 Gb/s SATA gates, etc.) to a member of the family and it is so much faster that my old I took him wanted him and decided to upgrade my system.

  My current system:

  1. Motherboard: ASUS P6X68D Premium
  2. Processor: Intel Core i7 930
  3. Chipset: Intel X 58 / ICH10R
  4. Memory: 24 GB (DDR3)
  5. Graphics card: MSI GEFORCE GTX 970 (NVIDIA)
  6. Motherboard ports:
     • 6 x SATA 3.0 Gb/s at HDs 5 and 1 OD
     • SATA 6.0 Gb/s on front eSATA port
     • SATA 6.0 Gb/s to hot box switchable front panel

  (The system is on an individual disk.  E and F are "Work" and "Scratch" each consists of two drives in RAID 0. All discs are 1 TB, SATA II).

  New system (I think):

  1. Motherboard: ASUS Sabertooth X 79 LGA 2011
  2. : Core I7 - 3930K Hexa-Core processor

  Other components of the old system would be used.

  Issues related to the:

  1. This system would be "a lot" faster (not a specific question for a physicist ) than the current one?
  2. I would RAID?
  3. Would be the SSD anywhere (but not all!) in the system to fix even more?

  I would appreciate any advice.

  Thank you

  LACI.

  Of course, it all depends on the budget available, but if I upgrade now an i7-930, these would be my main ingredients:

  • CPU: i7-5930 K or i7-5960 X. Not the i7 - 5820K as suggested above because of the limitation of only 28 PCIe lanes, which closes off the coast of expansion capability.
  • Mobo: Asus X99E-WS
  • Memory: GSkill Ripjaws 4 F4-2666, 32 or 64 GB
  • Disc of BONE: Samsung SM951 SSD, 256 GB m2
  • Extra PCIe card: card PCIe M2 Addonics ADM2X4 for
  • Media / disk cache: Samsung SM951 SSD, 512 GB m2

  and continue to use the GTX970 and the current HDD on SATA 6 G ports. I would certainly like to overclock the CPU at about 4.5 GHz.

  If you have still a few available budget, I would add that some Samsung 850 Pro 1 TB SSD on SATA 6 G ports for media and projects and delegate 1 TB for backup HARD drive.

  That way you can later add another Addonics card when the Samsung SM951 NVMe m2 readers reach 1 TB of capacity and possibly a second GTX without running out of lane PCIe 970. If you were to go in the direction of 'cheap' with the i7 - 5820K, you would have used 16 (video) + 4 (m2), 4 (ADM2X4) = available 28 24 lanes PCIe, leaving no room for a raid controller or a second video card.

  An i7 - 4790K is not an option, because it's only a 4-core, which is only marginally faster than the i7 - 930 (certainly not twice as fast, as claimed in the previous post), he is severely handicapped by only 16 available PCIe lanes used by the video card has no crack m2 on the mobo and you can reuse only 16 GB of your existing RAM except if you have sticks of 3 x 8 GB, in which case you would need one extra to get to 32 GB identical bar. 24 GB is not an option on a mobo 11xx due to the memory controller.

• Advice needed - graphics card for After Effects and Premiere Pro

  Hi all

  I did research of PC in the hope of making an investment in the most powerful PC, I can afford without breaking, and I need some advice.  According to my research online, it would seem that the best configuration for video editing would include an Intel i7 processor and an nVidia GeForce GTX 590 graphics card.

  The problem is that each computer I see who has this combo is significantly more expensive than other computers that have an Intel i7 and GeForce GTX 570.  The best bang for my money, I found was HP - he had an Intel i7 processor but only use a GeForce GTX 550 graphics card.

  You all have my question is this: how much difference do these graphics cards in terms of actual speed and reduce the working time & time in After Effects and first Pro CS5/CS5.5 rendering?  Is - what value the extra $300 - $400 to get the GTX 590?  Or who would only drop a tiny minutes rendering time / performance of the software?  In addition, could get away with high speeds and times of rendering with a GTX 550?

  To give you an idea of what I use this software for: I'm working on wedding HD DSLR video, sometimes with several layers of courses on the effects and transitions; I'll work on videos ranging from a few minutes in length of more than 45 minutes in length.

  I appreciate any input anyone has.  Thank you in advance and Kindest regards!

  -Michael

  Beware of HP systems. In general, they are unperpowered from a perspective of power supply, they use custom PSU which can not be exchanged for something else that HP, they use custom for the power supply dimensions, so it is impossible to replace one yourself and they are anything but attractive from a perspective of RE-ENGINEERING. They are very hard to overclock or not at all and are nothing more than mediocre artists or performers.

  Specifications you gave shows that he is a misconfigured system. An i7-2600 system should have 8 or 16 GB of memory, not 12 GB. It must use the 4 DIMM connectors, not 3. The power supply is low in power for this video card. Primary drive is too much for OS & programs and a complete waste of space. On a well-tuned system 150 GB is more than enough. 2 TB is not appropriate. You miss the 3rd and 4th hard drive, you will really enjoy for the performance.

  In short, these specs look like a waste of money.

• Advice needed on scanning and organization of large amounts of family photos

  I have about 4000 photos, I need to digitize and organize, and would appreciate information on the experiences of people with similar projects - specifically what scanners and software editing/organization work well (or not) and why. I am interested in scanning experience, naming, entering in the metadata tags / and storage on an external drive (or drive possible cloud) as effective as possible. I have a MacBook Pro towards 2012, running OS X El Capitan 10.11.6, processor 2.9 GHz Intel Core i7 with 8 GB 1600 Mhz DDr2 memory

  I waited for someone to answer, but no luck so far.

  I think that, maybe, the question is too broad, but you hit on a lot of issues that I tried to respond in support of my own digitization projects. These are essentially old photos and family concert tickets, I've gathered that I want to geocode instead and add an event date to sort the pictures correctly in my reader, I now use pictures all to also store the main images in the form of files in folders.

  One of the first things that you need to consider what is my final use, how will be I be display these carelessly or what their final destination, that is to say: the screen or print. Next, you will need to examine and decide what are your basic quality standards.  Is it an archiving project where you might want to get the maximum resolution to capture your images or you are looking for very high resolution - pixel specific pick - and go deep with it.  What types of files you save; jpg or RAW or another.

  Don't forget the file type is like a box and the picture is in the box, you can have the same image quality in each type of file and each has positive points and negatives, jpgs are the most common, can display high-quality, but at the root with loss.

  It is to you and how you want to store, manage and share.  You could take a sweeping super high ground - better as your scanner may take - and a large jpg copy for sharing, etc.

  Depending on how you answer the above, in terms of desired scan quality, will affect what kind of scanner that you buy. I used several descent average range flat scanners, a versatile case and a wand at a crossing through of dock that I just got.

  I decided quite a while that I'm not in the business of archive I'm in enjoy it there and share business. IF they look good in an email or on Facebook or on my big screen as screensaver, even for the large TV. Then, I have what I need. It is for me. Others feel differently. For me in the end, it's the time it took to take a sweeping super high quality in order to get an image, which overwhelms my screen and has a huge file size. You have to play and see what works for you.

  I just got this scanner wand 1200 dpi with a dock charger and it quickly arranged a pile of concert tickets at its highest quality of scanning. I was happy with the initial results and I can't wait to make some pictures.

  There are a lot of details, you can enter each of these topics, but here you say basically software that controls the scanner. On a flat bed I hope you can scan several small images at once by selecting them in the program. You select the output resolution, file type, and can perform a variety of other adjustments to the image, which some will be dictated by the source.  As the digitization of old photos 'black and white' in color.

  You will need to consider certain issues of workflow here, the scanner software will generally look to create file names to sequential access to what you are scanning. If it's a large image at a time, you can name each or there may wish to work through a lot of dimensions and similar features and then mess with the baptism and the meta data later.  You will find what works best for you as enter you.

  You have now all these files. For me, it was ticket_1 - 90.jpg who had to have their date, time and locations adjusted. I've been messing around with photos of geocoding for years and so far my favorite geogocder and meta-data tool is called photolinker http://www.earlyinnovations.com/photolinker/ that I started using it because I was using a geo - stay with my regular camera and I wanted to match the Geo-trail of the recorder for pictures and this tool does that very well , with tools for helpsync the time of the image and geolog times. or you can give it an address or a city or a block and he will score as many images you select. It will give them a geocode latitude and longitude (altitude in some cases) as well as the metadata for the region city of the State, etc.

  It also gives you quick access to metadata, including tiles, descriptions, keywords, etc. and I do as well of this titration and marking here as I can. as well as the geocoding.  Dates are a very special case that I will come back soon.

  So analysis stuff you give a whole bunch of files and you need to decide how you want to sort and store them. My family photos I usually sort in events and it is pretty easy because the images were of particular type of event and then something holidays. So I in my folder of photos folders called things like:

  1909 - Granma baby pictures

  1931_12_25-moms first Christmas.

  1952_07_21-dad comes from the service.

  etc with this kind of naming structure. months of the year and day, if I know that it and the event.

  The photos then if there are few have specific names for files. If it is more like '1986_07-Florida_ #1-72' and let the meter. If I can be precise date in each event, I try to do, since we are talking about scans and no pictures of digital cameras, if the clock is set right and phones that capture this info.

  The deal with dates, as I mentioned earlier, can be a mess and I have found no real primer on how best to define and manage the dates on scanned images, but here is a part from what I understand. First of all remember that the dates of creation and modification in your finder associated with the file that contains the image, but not necessarily the image itself. Each image also has various sets of metadata that is stored with the images, called EXIFdata, this is where you find the geocoded and other data type keyword, you may be added, such as discussed above.

  As I said I have use pictures formerly iPhoto to see my images now and it does not always play nice with dates, but I think I understood now that it uses a date edit EXIF, to place images in the long scenario.

  Other non-traditional software I use for batch file renamed and full playback and editing of EXIF data are GraphicConverter 10 adata-and-more-on-your-mac/ https://www.lemkesoft.de/en/image-editing-slideshow-browser-batch-conversion-met

  This should be a lot of things to get started, I've always wanted to write that down and happy to now have at hand. Many men of straw - for people to start to sting to, assisting us on the tools and means better or different. I hope. I also hope that this help find you your first steps. Good luck.

• R100: FDISK - simple advice needed...

  Hey peeps, need for basic assistance on obtaining a R100 Tosh started, she came back to me after Win2k on it by a former user and im trying to rebuild on XP.

  I have FDISK would be the drive because there is sensitive data present and created a primary partition of C, start the Xp Cd brings to the top of the blue screen of death after going through the normal configuration bits.

  I tried spinning round with a USB plextor nothing helped, so I need to get the boot from cd pcmcia r100 and so he can go through the xp install everything without crashing.

  Of course, this is a common question but could not find a reference to it here, appreciate all responses pointing me in the right direction...

  Thank you Neil'os...

  Hello

  As far as I know this camera comes with Windows XP Home edition Professional. You have the original recovery CD and Toshiba PCMCIA reader eternal? On this path, the installation will be easy. Otherwise, it can be very complicated. Original restore CD contains the correct driver for the external device from Toshiba.

  If you have two partitions on the HARD disk are trying to copy the facilities on the second CD and start from there.

• Satellite P100-307 Exchange HARD drive help/advice needed

  Hello

  Thanks for your recent advice on exchanging my 200 GB HDD in to a 500 GB Sized HDD.

  Can you please let me know what I should do with the new HARD disk, so that my P100 can recognize (I format etc.)? I would like the existing to the new mirrored HDD... How does go?

  Sorry to bother you with this beginner Questions...

  RGDS

  Windows will recognize a new hard drive (I assume that you will start the machine from cd) and it has need of formatting it will tell you. You will then need to change the format to FAT32 to NTFS - Windows Help will tell you how to...
  If you are keen on the old disk to the new disk of mirror image, then I think that google some research is in order for example "mirror new portable drive ' there are older versions of disk imaging programs available for free download that will handle NTFS. to search for names include Norton Ghost and Acronis.
  How do you think 'connect' the old and new readers - for example, external usb box on a network, set up two disks on a pc.
  You can copy all the files using the DOS command xcopy with the selector include hidden files/folders.
  Your old drive has a hidden for purposes of recovery partition and you must decide how you manage it.

• Failure of HD or another problem - troubleshooting advice needed

  MacBook Pro 15 inch, early 2011 running OS X El Capitan 10.11.1

  About a week ago I started to notice a considerable following during the time delay of opening the programs, files, and even typing... everything freezes for 2-3 seconds, then I get the beachball for a few seconds to more than a minute. I used the disk utility and checked everything (not verified, no repair required). As I obviously have a problem, I made a Time Machine backup to a WD 1 TB hard drive external and downloaded EtreCheck-2... I ran it at least five times in the course of a few days and whenever he found between 20 and 109 errors and I get unable to drive! Message. If there is a chance the drive is NOT the issue, I want to help out but don't know where to start... since I was a backup Time Machine recently can I wipe the drive and reinstall? Space seems to be a problem... plan to move photos from k 8 currently on my machine to the external hard drive. Also removed apps that I don't use, but I see pieces on the EtreCheck that I can't purge (Motorola, Jaksta). Any advice would be helpful... Most recent EtreCheck shown below.

  EtreCheck version: 2.6.6 (226)

  Report generated on 06/12/15, 21:18

  Hardware Information: (Does that mean?)

  MacBook Pro (15 inch, early 2011)

  MacBook Pro - model: MacBookPro8, 2

  1 2.2 GHz Intel Core i7 CPU: 4 strands

  4 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 618 - SN = D863372R1EKDGDLBC

  Video information: (Does that mean?)

  Intel HD Graphics 3000

  Color LCD 1440 x 900

  AMD Radeon HD 6750M - VRAM: 1024 MB

  Software: (Does that mean?)

  OS X El Capitan 10.11.1 (B 15, 42) - since the starting time: 9 hours

  Disc information: (Does that mean?)

  Hitachi HTS725050A9A362 disk0: (500,11 GB) (rotation)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 498,88 (Go 372,89 free) - 109 errors

  Drive failure!

  Storage of carrots: disk0s2 499.25 GB Online

  MATSHITADVD-R UJ-898)

  USB information: (Does that mean?)

  Computer, Inc. Apple IR receiver.

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  / System/Library/Extensions

  [no charge] com.motorola - mobility.driver.MotMobileUSB (1.2.2 - 10.5 SDK) [click for support]

  [no charge] com.plantsense.plantsmart.codelesskext (1.0.1d1) [click to support]

  /System/Library/Extensions/MotMobileUSB.kext/contents/plugins

  [no charge] com.motorola - mobility.driver.MotMobileMS (1.0.0 - 10.5 SDK) [click for support]

  [no charge] com.motorola - mobility.driver.MotMobileMTP (1.2.2 - 10.5 SDK) [click for support]

  [no charge] com.motorola - mobility.driver.MotMobileUSBLAN (1.2.2 - 10.5 SDK) [click for support]

  [no charge] com.motorola - mobility.driver.MotMobileUSBLANMerge (1.2.2 - 10.5 SDK) [click for support]

  [no charge] com.motorola - mobility.driver.MotMobileUSBSwch (1.2.2 - 10.5 SDK) [click for support]

  Startup items: (Does that mean?)

  Jaksta: Path: / Library/StartupItems/Jaksta

  Startup items are obsolete in OS X Yosemite

  Launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [loading] com.coupons.coupond.plist [click to support]

  [out] com.motorola.MDMUpdater.plist [click for support] [click for more information]

  [operation] com.motorola.motohelper.plist [click to support]

  [loading] com.motorola.motohelperUpdater.plist [click to support]

  [loading] com.oracle.java.Java - Updater.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [loading] com.malwarebytes.MBAMHelperTool.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  [operation] com.motorola - mobility.mmcfgd.plist [click to support]

  [loading] com.oracle.java.Helper - Tool.plist [click to support]

  [loading] com.oracle.java.JavaUpdateHelper.plist [click to support]

  User launch officers: (Does that mean?)

  [loading] com.adobe.ARM. [...]. plist [click for support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist -/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert: Executable not found!

  [loading] com.google.keystone.agent.plist [click to support]

  Items in user login: (Does that mean?)

  Google Drive hidden UNKNOWN (missing value)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)

  SmileboxTray hidden UNKNOWN (missing value)

  Other applications: (Does that mean?)

  [ongoing] com.etresoft.EtreCheck.46752

  [ongoing] JP.co.Canon.cijscannerregister.80352

  Plug-ins Internet: (Does that mean?)

  JavaAppletPlugin: Version: Java 8 update 60 build 27 check version

  npRevTraxPrintMyCoupon: Version: RevTraxPrintMyCoupon_x86_64 1.0.0.0 - 10.9 SDK [click for support]

  CouponPrinterPluginMac1.0.0.7: Version: CouponPrinterPluginMac 1.0.0.4 - SDK 10.7 [click for support]

  Unity Web Player: Version: UnityPlayer version 4.1.2f1 [click to support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.0.11 [click for support]

  AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

  FlashPlayer - 10.6: Version: 19.0.0.245 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.10411.0 - 10.6 SDK [click for support]

  WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 19.0.0.245 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 7.0 - 10.7 SDK

  SharePointBrowserPlugin: Version: 14.5.8 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

  CouponPrinter-FireFox_v2: Version: 5.0.7 - 10.6 SDK [click for support]

  GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [click for support]

  DirectorShockwave: Version: 11.6.3r633 [click to support]

  User Plug-ins internet: (Does that mean?)

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 [click to support]

  npBcsMcTcIO: Version: Unknown [click for support]

  Safari xtensions: (Does that mean?)

  Add to the list of Amazon gift

  3rd party preference panes: (Does that mean?)

  Flash Player [click for support]

  Flip4Mac WMV [click for support]

  Java [click for support]

  PlantSmart [click to support]

  Time Machine: (Does that mean?)

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Macintosh HD: Disc size: 498,88 GB disc used: 125,98 GB

  Destinations:

  My passport [Local]

  Total size: 999,83 GB

  Total number of backups: 3

  An older backup: 05/12/15, 22:08

  Last backup: 05/12/15, 23:39

  Size of backup drive: adequate

  Backup size GB 999,83 > (disc 125,98 GB X 3)

  Top of page process CPU: (Does that mean?)

  10% systemstatsd

  7% WindowServer

  1% kernel_task

  1% fontd

  0% com.apple.WebKit.WebContent (2)

  Top of page process of memory: (Does that mean?)

  Kernel_task 468 MB

  348 MB com.apple.WebKit.WebContent (2)

  Mail 106 MB

  Mdworker (5) 98 MB

  WindowServer 94 MB

  Virtual memory information: (Does that mean?)

  325 MB free RAM

  3.67 GB RAM (1.27 GB being cached) used

  18 MB used Swap

  Diagnostic information: (Does that mean?)

  6 December 2015, 11:54:30 self-test - spent

  You will need to replace the hard drive.

• Advice needed on the laptop hard drive data recovery.

  Hello

  I was wondering if someone could provide some advice on the recovery of data from an ACER laptop which was held in Microsoft Vista?

  The laptop broke due to the 'PIN' inside the power supply's cable breaking. PC World said that it would cost hundreds of pounds to repair.

  I have some important files saved on the drive hard (backup files conveniently failed too!) and I'd like back them.

  What are my options? Should I seek professional IT useful to do? Or I can try to get files back myself? I currently have a Toshiba laptop that works under XP.

  Hello Chris,

  I by removing the hard drive and put it in a USB enclosure. There are 2 types of one HD is IDE the other is SATA. You can buy one from Newegg.com for less than $ 15. You may need to take possession of the disc and its files if you do this. Here are the steps: to take ownership of a file or a folder how to appropriate a file you must have owner of a protected file to access. If another user has restricted access and you are the computer administrator, you can access the file to appropriate.

  To take ownership of a file, follow these steps:

  1. Right click on the file that you want to take control and then click Properties.
  2. Click on the Security tab, and then click OK in the security message (if one appears).
  3. Click Advanced, and then click the owner tab.
  4. In the name list, click administrator, or click the Administrators group, and then click OK.
     The administrator or the Administrators group now owns the file.

  To change the permissions on the file that you now own, follow these steps:

  1. Click on Add.
  2. In the list enter the object names to select (examples) , type the user or group account that you want to have access to the file. For example, type administrator.
  3. Click OK.
  4. In the group or user names list, click the account you want, and then select the check boxes of the permissions you want to assign to this user.
  5. When you're done to assign permissions, click OK.
  6. You can now access the file.

  How to capture a record you must have ownership of a protected folder to access. If another user has restricted access and you are the computer administrator, you can access the folder by taking possession.

  To take ownership of a folder, follow these steps:

  1. Right click on the folder that you want to take control and then click Properties.
  2. Click on the Security tab, and then click OK in the security message (if one appears).
  3. Click Advanced, and then click the owner tab.
  4. In the name list, click your user name, click administrator if you are logged in as administrator, or click the Administrators group. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects .
  5. Click OKand then click Yes when you receive the following message is displayed:
     You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?

     All permissions will be replaced if you click Yes. Note folder_name is the name of the folder you want to take charge.

  6. Click OK, and then reapply the permissions and security settings that you want for the folder and its contents.

  Let us know whether, if that helps you. Make it a great day!

  "In the end, the love you take, is equal to the Love You Make"