Advisor about the replacement of video clip

Similar Questions

• Questions about the replacement of a power supply for a P7-1235

  I decided to do an update on my Pavilion P7-1235. I put in a graphics card and put in power level. After doing some research on this forum and others I know well enough that I need. The only question I have is about the food. I don't know what the original power supply. There is a vent on the side where it however. So I guess that there is a fan on this side of the power supply. This eating plan I get:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139050 & TPK = % 20500% 20% 20modular %2 watt Corsair...

  I noticed that the fan is on top? Now there is no high ventilation in my P7-1235, I worry for nothing? I think that all the supplys to look the same. What is the top of the fan page for? Or can anyone suggest a replacement perfect for my exact Pavilion model?

  Sorry if the questions are stupid, but I'm still learning and want to do what I can myself!

  Hello

  Yes, you can use the power supply the same way. The image is in a vertical position for the convience of the buyer. I have the same with number of power supplies and it was fine. You can check the following links people have set up exact POWER supply in different ways.

  http://pcpartpicker.com/builds/by_part/Corsair-power-supply-cx500m

  However, please be aware of your power supply size and your case. If you have all materials/components in stock for your computer, then it is what it is;

  ATX case:

  : Height 39.4 (15.55 inches)

  Width: 17.5 cm (6.89 in)

  Depth: 40.9 cm (16,14 inches)

  PSU stock:

  (5.9 x 5.5 x 3.4 inches)

  And the power supply you want;

  Corsair size;

  "5.9"x 3.4"x 6.3"

  As you can see the length of the Corsair is considerably larger than your stock of power supply. This could hampor of air or could even make it so the holes of the PSU and the case does not match. However, this is usually not what worry. The height and width that should be worried because the length rarely causes problems, I wanted to just make sure that you knew in advance.

  Take advantage of your power supply; Corsair is a great brand.

• Change in the depths of video clips with button click

  Hi all

  I have a file work on that has 4 different video clips on a layer which, when clicked, will zoom in (made with the Tween span in the timeline panel).

  The question I have, is that when I click on one of them, they are arranged in a way that does not work for what I need. I click on one and it works, but it is hidden by the clip that is above in the hierarchy. Click on another, zooms, but is partially hidden by another.

  My question is: is he still in AS2 to code these so that when it is clicked on, it will be the first place of the heriarchy? While I can encode all like that so that whenever a user clicks on, it goes to the top, so it is not hidden?

  Thank you

  You can also use a number.  for example:

  {mc.onRelease = function ()}

  this.swapDepths (this._parent.getNextHighestDepth ());

  }

• Can I block the recording of video Clips?

  I have video clips (MOV files) on a website that the icons of a PDF file I built can bind to and open (to clarify: the icons are actually just virtual boxes around the icon images that were in the Word doc where it was built). Generally, the MOV files open in a web page (which is quite good), and the user can right click on them and keep them (that's bad). Note: my default browser is Foxfire.

  However, I notice that if I have MS Internet Explorer open (but only if I actually open), the MOV files open in their own window Quicktime (good!), and the user cannot click on them and save them (great!). Is there a way I can force this desired behavior when I build the PDF?

  (Note that the consumers of the PDF will it reside on their local computer.)

  Thanks for your help!

  The only way to prevent a video to be saved locally is to broadcast using a negotiated protocol and a video streaming software on the server (Adobe Media Server, etc.). Any static file on an http (web) server will be downloaded to the hard disk of the user in order to play, regardless of the format or what application he plays. Whenever you play a video remotely in Acrobat or Adobe Reader, the user will display a security command prompt list the URL of the video file, so it is trivial for the user to copy.

  PDF files created in Acrobat 9 and later versions include the readers that are integrated for videos that are hosted online, including the files delivered through streaming servers (URL starting with rtmp or rtmpe), but the implementation of the server is expensive.

• Buttons do not work in the case of video clips?

  Hello, I hope someone can help me here. I am trying to create a portfolio site and I'm running into some problems. I built my main site on the timeline and all my work of fine buttons AS is very simple:

  function goForward(event:MouseEvent):void

  {

  if(currentFrame == totalFrames)

  {

  gotoAndStop (1);

  }

  else

  {

  nextFrame();

  }

  }

  next_btn.addEventListener (MouseEvent.CLICK, goForward);

  But when I do video clips of scenes with buttons in them (kids?) to try and simplify the site, BECAUSE does not recognize the instance name of the button in the Clip. I get an error message:

  1120: access of undefined property next_btn.

  I put an invisible button on the mc and gave it the instance name of next_btn and it works but I want to fix the buttons in the MC properly. I think it has something to do with my children, so I have them knocked all over the place, but it still does not work! (I'm kidding). What the hell are mousechildren?

  Is it better to condense a site in video clips and individual images or I would have just a chronology long steers that spans numerous frames?

  Thank you

  strabismus.

  1009 error basically means that your code is something that he does not frame, is it.  Go to your publication of Flash settings and select the option to enable debugging.  When you run the file again, the error message should include a line number to indicate which line is causing the problem.  Your instance names seem to have changed between the first validation and the second, so make sure that you have things named to be agreed between the code and objects.

• How can I list the instances of video clips if the clip that I am referencing is nested?

  Hello world

  It's me again and I am running into a problem. So I have this clip which is nested in several video clips. I mean Flash to perform an action when this clip from movie hits another video clip in the main timeline. It's just a collision for a game detection using the hitTestObject code. I was thinking of using MovieClip (root), but that won't work because it is so nested. Can someone help me? I would like to know if I need to explain more. Thank you!

  -DJ

  I didn't ' think I can help you without having to upload your file to see what you're doing and I don't download and fix the files unless I'm hired.

  Maybe someone else you download your fla and you help.

• A small question about the replacement of the DVD in a HP Pavilion dv6 - 2057cl

  I need to replace the DVD drive in this dv6, and I wonder if there is room for manoeuvre with regard to the replacement drive.  Can I use another drive to disc HP with a similar model # or am I limited on drive 'identical '?

  Some quick info follows:

  OS = Windows 7 home premieum (32 bit)

  The disk removed from the laptop:

  DVD Super Multi writer

  MODEL: GT20L

  FW: DC05

  HW: A2

  TYPE: AMCK702

  CT: 7AXVK012GY3NRY

  HP mPC REF: 461646-6 c 2

  S/N:
  {Removed privacy}

  MANUFACTURED: OCTOBER 2008

  I found a replacement with the same 'model' and even 'HP mPC PN' but it was made in 2009, and I don't know whether or not the implementation of the SATA connection on the rear of the car fits.

  Any help is very appreciated!

  Thank you

  DaFlash

  It seems that the reference is the same. As long as the part number is the same, it is essentially the same part and should work without any problems. The only time where this part can fail if the part number is different. If a part is different from another part (software, hardware, etc.), it will have a different reference number. Also long that 461646-6 c 2 is identical on both, there is no problem with the disk replacement.

• Question about the replacement of the dilapidated old Airport Extreme

  I have an old Airport Extreme, probably about 8 years old.   There seem to be wonky on me.  I tried everything, including resetting to the factory settings.  In any case, the point is that I have to replace the unit.  However, it is mounted in a box electric wall unit, which is not deep enough to contain the new style 'vertical' Airport Extreme which is meant to sit on a desk. It is about an inch too wide.  This new design really * for my situation.

  So, I'm stuck with a choice to replace it with another employee (or I think that some are still box on Amazon) old Airport Extreme, or with another unit of the brand that does the same thing.  Of course, I prefer to stay with Apple, like all my Airport Express, my Time Capsule airport and all our devices are Apple.

  What is the best choice?

  There is a third choice: install the new unit somewhere else than in an electric box armoured, metal. This is not a good location for any wireless device.

• Satellite A200-1GH. Questions about the replacement of HARD drive

  Someone made about?
  Consider replacing _TOSHIBA MK1237GSX factory-installed ATA Device _ with HDD 320 Gb SATA - II MK3252 _Toshiba GSX_ (120±, 5400 RPM, SATA-II)

  What I'll do with the hidden partition of Windows Vista that is used for the start?
  Is it possible to ignore it?

  Any suggestions?

  > What should I do with a hidden partition in Windows Vista that is used for the start?
  The hidden partition is needed for the repair of the system!
  If something goes wrong with the system, Vista would be able to repair the system using the files from the hidden partition.
  The Vista operating system creates this partition automatically during the installation of the OS!

  After you change the HARD drive, just start using the Toshiba and Vista recovery disk should create the partitions and must run the installer automatically

• Question about to extend a video clip.

  Hello!

  I ask that yo. How can I extend the full clip. Composition setting a setupped for 1 min and 30 sec. My video is 45 sec. How can I extend it to 1.30. When I press Ctr + Alt + T. Its allows me to extend an orange chassis, but without extending the content inside.

  What I can do. Thank you

  
  
  

  These orange layers are nested compositions.  If you want more, you must find them in the project window, open them and change their length in the parameters of the model.

• Question about the replacement of keyboard

  Hello world

  I have a problem with my key number six works do not, but have not cracked, but my games and, therefore, my enjoyment of the weekend are on this laptop.

  How long would take to be done under warranty? Clues would be useful.
  Thank you.

  Hello

  I don't know what model of laptop you have, but keyboard replacement is completed in a few minutes. The problem is how long he wants to takes control again. You must contact the partner in your country. Talk with them. Maybe they have keyboards in stock.

• Question about the replacement of router and new network location. Is this normal?

  Yesterday, I replaced my router with a another router of the exact same brand, model, and firmware version. The only thing that has changed as far as the router will have the MAC address.

  In any case, after that I swapped the router and plugged the network cable, I could use Internet all day very well. This morning when I turned on the computer, introduced me to all of a sudden with the Wizard "Set network location", and Windows has created a new situation "network 2". Everything always seem to work well.

  I want to just make sure that it is the expected, normal Windows 7 behavior after changing a router. I'm just a little paranoid because the network location Wizard pops up only the next day, I replaced the router, and not immediately after I plugged in the cable.

  Thank you!

  Yes. It's normal.  The delay in the command prompt is a little unusual, but I've seen this before.

• Talked about the day differently audio clips

  Hi there, please help - :))

  I have several clips of creations audio .wav for learning project, that I'm building for online customer. However the clips are sounded differently (maybe because they were recorded each in another room). How can I make the most of the features unifying these audio clips?

  Thanks for the replies and advice.

  Yarik

  I'm afraid you can't. It's a problem for the voice-over since they were invented.

  The problem is the human ear is very sensitive to the way sound people and can detect the smallest differences very easily. So if change you even the slightest thing on the way in which it is registered, it will be its different. And here is the differences that you just can't hide, I'm afraid - some people may even make the difference between someone in an identical configuration before and after lunch - what you eat and drink can alter your voice enough for some people to tell.

  The result of this is that if you want a voice-over for the same sound completely, however, you must save all at the same time and make sure that the person making it sipped anything else water at room temperature while making!

  The way that many people move discontinuities is to use a second voice, interspersed with the first, so that they alternate pieces of it. If there are major differences in the record, then even if it does not work.

• The use of video Clips in arrays?

  Hello

  I am trying to learn how to use arrays. Specifically, I'm trying to use a table to control a set of clips ("box1" - 'box8') contained in a clip parent ('boxes'). I looked on the help pages and tried to apply what I learned in my situation. Here is my code, but I don't know if I'm completely missing the mark. There seems to be a problem with how I'm wearing on the elements of the array in my if/else statement.

  Any advice?

  (I use AS2 in CS3).

  var mouseListener:Object = new Object();
  var scale: number;
  var scaleBig:Number = 200;
  var scaleSmall:Number = 100;

  var boxArray:Array = [boxes.box1, boxes.box2, boxes.box3, boxes.box4, boxes.box5, boxes.box6, boxes.box7, boxes.box8];

  boxes.onRollOver = function() {}
  Mouse.addListener (mouseListener);
  }
  boxes.onRollOut = function() {}
  Mouse.removeListener (mouseListener);
  }

  mouseListener.onMouseMove = function() {}
  for {(var boîte: String en boxArray)}
  scale = (scaleBig - (Math.abs (_xmouse - [area] ._x)));
  if(Scale > scaleSmall) {}
  [box] ._xscale = scale;
  } else {}
  [box] ._xscale = scaleSmall;
  }
  }
  }

  use:

  var mouseListener:Object = new Object();
  var scale: number;
  var scaleBig:Number = 200;
  var scaleSmall:Number = 100;

  var boxArray:Array = [boxes.box1, boxes.box2, boxes.box3, boxes.box4, boxes.box5, boxes.box6, boxes.box7, boxes.box8];

  boxes.onRollOver = function() {}
  Mouse.addListener (mouseListener);
  }
  boxes.onRollOut = function() {}
  Mouse.removeListener (mouseListener);
  }

  mouseListener.onMouseMove = function() {}
  for {(var boîte: String en boxArray)}
  scale = (scaleBig - (Math.abs (_xmouse - boxArray [box] ._x)));
  if(Scale > scaleSmall) {}
  ._xscale boxArray [box] = scale;
  } else {}
  boxArray [box] ._xscale = scaleSmall;
  }
  }
  }

• Question about the replacement of the TFT on Satellite 4200

  Hello

  I am new and my English is not very good.
  I want to know if the TFT of 4600 a Satellite is part of a 4200 satellite. My screen is broken and I can buy a screen a 4600.

  Help, please.

  Henk

  Hello

  It s is usually not possible since the 4200 series is a kind of mid-range model in front of the 4600 series which was intended for high-end multimedia at this time.

  Not only the screens were different, the connectors and the FL inverters are also completely different.

  What screen do you have in your 4200? "" Is a 13.3 ", 14" or 15 "size? Maybe you can get some LCD @ Ebay new and cheap...

  Welcome them