AE CC Render error output module is not

Similar Questions

• Adobe AE CS3 that Render and output Modules

  OK Buddies

  Using Vista 64 with AE CS3

  I imported a full project (Audio and video) Premiere CS3 for AE CS3, I added all my Fx and etc, and then I went to return that and tried to do my final AVI, I also installed Lagarith Lossless Codec on my system, but made everything is done with NO AUDIO

  then under render I found this article called "Output Module" by default, it has been set to Lossless, I don't know if this refers to the codec lagarith or something else and under the "Audio output" was set to OFF

  so I changed the output to Microsoft DV NTSC 48 kHz module

  is what it means that I no longer use Lagarith as my codec or lossless it was for audio?

  or what is the correct way to set my audio channel ON!

  Thank you

  "Lossless" is the name of a model (IE, a collection of pre-made settings) for the output Module in the render queue.

  On a Windows system, the "Lossless" model defines the video for Windows (AVI) video format as "Uncompressed" as codec.

  There is not a factory pattern for Lagarith, because it is not a standard AVI codec, in the sense of being available in all systems. It is only available once you download it and install it.

  You can use the "Lossless" model as starting point, press the button 'Options of Format' in the output Module and replace the Lagarith codec and then record what a new model (just so that you don't have to choose your codec of choice every time, simply choose your model).

  By default, the audio output is disabled. Again, you can turn on and save a template, which you can for example name "AVI - with audio Lagarith.

  Of course, the Microsoft DV model defines the output module to use the AVI format, with the codec of Microsoft.

  As you can see, a codec must not only be installed on your system, but it must also choose the 'Format Options' dialog box.

  Usually, I am attaching screenshots to illustrate these things, but I am at home on a Mac laptop, so Video for Windows and/or Lagarith is not available as an option.

• To remove the program but the error is module could not be found

  I have the program I want from my computer, but when I go to remove it, I get an error message indicating that the specified module could not be found. If it cannot be found average it is on my computer and how I can remove it.

  Can someone help me

  Because it is a spyware...

  http://www.spywareremove.com/removeMorpheus.html

  .. .follow the manual removal if you do not have to purchase the software.  You can also try to...

  http://www.Malwarebytes.org/

  .. who's free little I don't know if he's going to remove it.

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• After that effects lead stalls with ProRes Codec - output Module is not

  Hello world

  I have an AE full working file I've worked for the last month and today, it is shocking, an export through the queue of rendering with Apple ProRes 422 crashed on the first image.

  I have troubleshooted by removing the preferences of 2015 for CC AE, AE CC 2015, resettlement through the CC uninstall app.  Reduce the project, made test files to different codecs and determined that it is indeed the ProRes Codec, because made without loss of product and file Codec Animation without any problem.

  I think I have an idea as to what has caused this, I have another concert, requiring some FCP X for certain exports and I installed it, not realizing that he would blow away my FCP 7 Suite.  I had to spend some time, reinstall 7 FCP FCP X alongside earlier this week and went through the trial stages.  I confirmed earlier that the ProRes codec exists because I returned to ProRes in FCP X, but I wonder if this may have damaged something with the codec for AE.

  Curious to know if anyone has any suggestions, I'm on a 2011 17 "MacBook Pro 2.5 GHZ i-7, running all the files on a server RAID Thunderbolt TB 12 8 GB of Ram.  Before you reinstall, all cache files were redirected to the RAID server for performance, now, after the relocation of the media Cache model (shared between SOUL / body / AE) remains on the raid, however, the Disk Cache resets to default Mac library location.

  Plugins for the AE file are all standard plugins, I have Trapcode and a few other standard plugins installed, but do not use them for this project.  I am particularly pleased to provide more information, just ask and I'll get back to you.  Thank you!

  Last updated - FIXED:

  So, do not know what happened, I'm guessing that FCPX / FCP7 introduces some quirks with the package ProCodecs from Apple.  After execution permissions on my server, repair permissions YASU (yet another system utility), I finally made it and then gritted my teeth with the software update - not usually something I do in the middle of something.  Updated software provided a specific to FCP X update ProCodec which seems to have solved the problem.  So yay me.  Thanks for listening.

• After effects CC output Modules to render only Machines

  Hi there, I have a problem with the custom output Module Templates and my cluster:

  After Effects CC 12.0.0.404 (also showing up-to-date cloud Creative)

  Mac OS X 10.8.4 (Mountain Lion last version)

  Mac Pro 2.93 GHz, Radeon 5870 8-Core, 32 GB RAM and with Blackmagic Decklink Extreme 3D +.

  Remote Machines (there are four) are Mac Pros (Quad-core, running 10.7.2 with 16 GB of RAM), by using the ae_render_only_node.txt file in their folder of user Documents.

  The exact error:

  aerender ERROR: no output to the name module model were found.

  I try to get a cluster working with After Effects CC (see exact version above). Unfortunately, I need custom output modules, and I can't seem to get the slaves made to recognize. I found older sons on this particular issue, but no solution has been found.

  I use commandline aerender in OS X terminal to start a render with a basic test scene.

  To simplify things, I tried to test this on a single machine, rendering both slave... Same result everywhere.

  Here is what I tried:

  I have exported a file of .aom of my main machine (where I have my desired custom output Modules) and attempted to bring on the slaves of rendering. However, because the slaves of rendering are return only, (they ae_render_only_node.txt in their Documents folder), the ability to import Modules output is disabled in After Effects (it opens as the rendering engine of the effects after and modify > Templates menu is grayed out).

  Then, I thought I would try to copy the main machine (user) /Users/ / Library/Preferences/Adobe/After Effects/12.0 folder to render slaves, thinking that would get any other file in preference to them to define the output modules. No luck. Launched After Effects (which loads as renderer after effects) and reset my preferences to disk cache (so they were not always of the main machine). Tried again aerender... no luck. Same error:

  aerender ERROR: no output to the name module model were found.

  After that, I thought it would be a good idea to log out of Adobe Creative cloud on the main machine and try connecting the machine slave made with my UserID and password and temporarily remove the ae_render_only_node.txt file. Then I would import the .aom file in the full version of the AE... I tried this and success! The work of renders... they find the output without problem Modules. Only it is, as soon as I log out and switch between using the ae_render_only_node.txt file, the output Modules are not found. Don't know what's going on--if the output Modules are currently disabled by the ae_render_only_node.txt file? Or maybe signature out of my Adobe ID is to remove preferences that determine the output Modules? Don't know where the output Module preferences are stored to be able to tell.

  Next attempt: I thought that I would try my preferences with creative cloud sync. I made sure to check synchronization preferences after effects to ensure that the output Modules are configured to synchronize. I did a sync where I transferred my preferences of the main machine. Then, on the slaves of rendering, I ran synchronization preferences and chose to download preferences. Works when connected, but not when it is used as a single render node. When it comes to a single node returned, he even invites me to download synchronization preferences and exit the Application, which I do, but nothing seems to happen. I retry aerender and still the same error:

  aerender ERROR: no output to the name module model were found.

  I can't seem to find any info on where the output Modules are actually stored (apparently they are not anywhere in the user/Library/Preferences/Adobe/After Effects / folder?). Visited only nodes not allowed to have custom output Modules? Not even for something as simple as the multi-machine with an action sequence post-render set enabled Proxy?

  Any help is greatly appreciated!

  Thank you.

  Today, we released update after effects CC (12.1), which fixes this bug.

  Let us know how things work out for you in the updated version.

• QuickTime export error: "an output module has stopped responding."

  I feel an odd export error when I use the Quicktime codecs:

  "After effects error: an output module is not responding." The file may be damaged or corrupted. You may need to restart After Effects. »

  Similarly, Adobe Media Encoder crashes when Quicktime codecs. No program does any progress at all before the blocking does not happen. At this point, I have to manually "end task" to exit. In addition, it seems not to matter of what I'm trying to export. For example, in the SOUL, I can just try to convert one video format to another and do hang, so I don't think that the problem is due to a problem with the settings of the source or the effects. Also, I'm not all multiprocessing since I did not really enough RAM for it. Other work of output modules, so I export only image sequences for now.

  System Specs:

  Windows 7 64 bit

  Intel i7 - 2600 k processor

  8 GB RAM

  GTX 580 GPU

  Software:

  Adobe CS6

  AE Plugins include Tracode Suite 12 and optical flares

  QuickTime 7.7.3

  Any ideas on that? I have seen very few references to this error in other places and not really found a solution that seems to apply to my situation. Thanks in advance for your help.

  Josh

  http://myleniumerrors.com/2013/01/11/26-142-5/

  Read it and the links that lead from there, then to understand what is blocking communication with QT.

  Mylenium

• CC bridge - output modules Installation does not

  (This was in a 'answered' response. Try as new question).

  Hello

  I have a problem with having the output Module works as well.

  According to the instructions I did everything correctly. Install Adobe Output Module

  I:

  1. Copy the folder Adobe Output Module (not the folder AOM_Package_ [OS]) in the bridge CC Extensions folder in the appropriate location:

     • Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions

  2. Copy the file AdobeOutputModule.workspace in the folder of workspaces under the bridge CC Extensions folder.

  When I place the bridge workspace file AdobeOutputModule.workspace doesn't stand at all. If the Module is in the same folder as the BridgeCC file, then there is no change in whether or not the bridge works.

  In addition, I do not. ['-$$ $AdobeOutputModule.workspace "in the name of \Users\[user] \AppData\Roaming\Adobe\Bridge CC\Workspaces folder. All I see are

  1. !! -$$$ Essentials.workspace
  2. !! -$$$ LightTable.workspace
  3. !! -$$$ Navigator.workspace and
  4. !! LastMenu.workspace

  Help please. Other ideas.

  Thank you

  Mario

  DEKRA, if you do not see the! -File $$$ AdobeOutputModule.workspace, which means the output module is not properly installed on your machine.

  I suggest you:

  • To check if you have the administrator rights on the computer, if not, log in with the admin account and.
  • Bridge Reset workspace: in Bridge, choose window > Workspace > reset Workspace
  • Download the appropriate package of 32bits or 64bits AOM and be sure dé-compresser or extract. Have seen issues like these, if users do not extract the files.
  • Now copy the folder Adobe Output Module (not the folder AOM_Package_ [OS]) in the bridge CC Extensions folder in the appropriate location:
    • Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
  • And now to copy the file AdobeOutputModule.workspace in the folder of the workspaces in the bridge CC Extensions folder.
  • Launch bridge and check if you get the message "the extension of the"AdobeOutputModule"bridge has been added to the bridge.
  • Also, make sure that the user has full permissions read/write on the folder C:\Program Files\Common Files\Adobe.

  Let me know how it goes.

  ~ David

• Several causes of rendered output modules to fail?

  Is that someone else's difficulties with the use of several modules output in sequels?  Let me explain: I'm working on a 3d movie, and my workflow is to simply work with the images side by side in a simple model (we are in HD, so the size of the model is 3840 x 1080).  Very often, I need to trigger a quick render to show the Director.  Most of the time, I just make the left eye by cropping in this area of 1920 x 1080 in the output module.  Other times I need to deliver both eyes, so instead of cropping up to 1920 x 1080, I resize the image in the output module 1920 x 1080.  Yes, we lose half of our horizontal resolution, but this isn't a big deal for us when working just on amenities.

  Here's the thing: sometimes I want to export several variants of this at once (ie the module output to the left eye), one for the right eye and one for the shrunken left-right-by-side video.  Whenever I try to the release of several modules with quicktime, it fails.  Every time.

  When it goes down, I get two messages: the first (a warning) said "after effects WARNING: last image was written to one or several modules, but not all output! (26: 153) »

  The second (error) message appears once for each output module: "after effects error: rendering error while writing to the file 'C:\blahh blah blah\whereIputmyfiles\the_render.mov'.» An output module is not.  The file may be damaged or corrupted. (- 1610153464). "Once he goes down, I can't exit in quicktime at ALL (several modules, output or not) without having to restart After Effects.

  I tried out several modules as a PNG sequence... and that works great (so "slow as hell" can never be called 'fine' ... but it worked!)

  I tried out multiple formats, I tried with an output module by rendering point (rather than having a single item of rendering with several modules) as quicktime, and has very good work (of course... it takes N times longer but... for the N number of outputs).

  I'm on Windows 7 64 - bit... short after effects CC 2014... I never had this problem where I was working on the CC version (not cc 2014... version is too complicated...).  However, I have just returned and tried with the older version, and it no longer works there either!  What gives?

  With the release of quicktime, I use the h.264 codec.

  And before anyone suggests, no I can't just use SOUL because who can not resize the video (it forces you to keep the proportions, through black bands) or crop the video.

  What version of AE and OS to the last comma?

  Out of Quicktime h.264 is buggy and should not be done. Have you considered using Adobe Media Encoder by dragging your compositions completed in a model of rendering? Even when you use the output Module, it is a better and faster to make the option of resizing of the model in the output module.

  Most likely guilty is the Quicktime h.264. Never, it should appear as an option. It does not yet well in Quicktime Pro or Final Cut...

• "CustomTimer" module is not installed

  I create a module with the name "CustomTimer", but if I run my project, main.qml not loaded, error 'CustomTimer module is not installed.

  It's my applicationnui.cpp

  /*
   * Copyright (c) 2011-2013 BlackBerry Limited.
   *
   * Licensed under the Apache License, Version 2.0 (the "License");
   * you may not use this file except in compliance with the License.
   * You may obtain a copy of the License at
   *
   * http://www.apache.org/licenses/LICENSE-2.0
   *
   * Unless required by applicable law or agreed to in writing, software
   * distributed under the License is distributed on an "AS IS" BASIS,
   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   * See the License for the specific language governing permissions and
   * limitations under the License.
   */
  
  #include "applicationui.hpp"
  #include "timer.hpp"
  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  
  ApplicationUI::ApplicationUI(bb::cascades::Application *app) :
          QObject(app)
  {
      // prepare the localization
      m_pTranslator = new QTranslator(this);
      m_pLocaleHandler = new LocaleHandler(this);
  
      bool res = QObject::connect(m_pLocaleHandler, SIGNAL(systemLanguageChanged()), this, SLOT(onSystemLanguageChanged()));
      // This is only available in Debug builds
      Q_ASSERT(res);
      // Since the variable is not used in the app, this is added to avoid a
      // compiler warning
      Q_UNUSED(res);
  
      // initial load
      onSystemLanguageChanged();
  
      // Create scene document from main.qml asset, the parent is set
      // to ensure the document gets destroyed properly at shut down.
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      // Create root object for the UI
      AbstractPane *root = qml->createRootObject();
  
      // Set created root object as the application scene
      app->setScene(root);
      // Register the Timer class in QML as part of version 1.0 of the
          // CustomTimer library
          qmlRegisterType("CustomTimer", 1, 0, "Timer");
          // ...
  }
  
  void ApplicationUI::onSystemLanguageChanged()
  {
      QCoreApplication::instance()->removeTranslator(m_pTranslator);
      // Initiate, load and install the application translation files.
      QString locale_string = QLocale().name();
      QString file_name = QString("TraffictLight_%1").arg(locale_string);
      if (m_pTranslator->load(file_name, "app/native/qm")) {
          QCoreApplication::instance()->installTranslator(m_pTranslator);
      }
  }
  

  and this my timer.cpp

  /*
   * timer.cpp
   *
   *  Created on: May 14, 2014
   *      Author: Valdi
   */
  #include 
  #include "timer.hpp"
  
  Timer::Timer(QObject* parent)
       : bb::cascades::CustomControl(),
       _timer(new QTimer(this))
  {
      Q_UNUSED(parent);
  
      // If any Q_ASSERT statement(s) indicate that the slot
      // failed to connect to the signal, make sure you know exactly
      // why this has happened. This is not normal, and will cause your
      // app to stop working
      bool connectResult;
  
      // Since the variable is not used in the app, this is
      // added to avoid a compiler warning
      Q_UNUSED(connectResult);
  
      connectResult = connect(_timer,
                              SIGNAL(timeout()),
                              this,
                              SIGNAL(timeout()));
  
      // This is only available in Debug builds.
      Q_ASSERT(connectResult);
  
      setVisible(false);
  }
  
  bool Timer::isActive()
  {
      return _timer->isActive();
  }
  
  int Timer::interval()
  {
      return _timer->interval();
  }
  
  void Timer::setInterval(int m_sec)
  {
      // If the timer already has the specified interval, do nothing
      if (_timer->interval() == m_sec)
          return;
  
      // Otherwise, set the interval of the timer and emit the
      // intervalChanged() signal
      _timer->setInterval(m_sec);
      emit intervalChanged();
  }
  
  void Timer::start()
  {
      // If the timer has already been started, do nothing
      if (_timer->isActive())
          return;
  
      // Otherwise, start the timer and emit the activeChanged()
      // signal
      _timer->start();
      emit activeChanged();
  }
  
  void Timer::stop()
  {
      // If the timer has already been stopped, do nothing
      if (!_timer->isActive())
          return;
  
      // Otherwise, stop the timer and emit the activeChanged()
      // signal
      _timer->stop();
      emit activeChanged();
  }
  

  and this is my timer.hpp

  /*
   * timer.hpp
   *
   *  Created on: May 14, 2014
   *      Author: Valdi
   */
  
  #ifndef TIMER_HPP_
  #define TIMER_HPP_
  
  #endif /* TIMER_HPP_ */
  #include 
  #include 
  class QTimer;
  class Timer : public bb::cascades::CustomControl
  {
      Q_OBJECT
  
      Q_PROPERTY(bool active READ isActive NOTIFY activeChanged)
      Q_PROPERTY(int interval READ interval WRITE setInterval
                 NOTIFY intervalChanged)
  
  public:
      explicit Timer(QObject* parent = 0);
  
      bool isActive();
      void setInterval(int m_sec);
      int interval();
  
      public slots:
          void start();
          void stop();
  
          signals:
              void timeout();
              void intervalChanged();
              void activeChanged();
  
      private:
          QTimer* _timer;
      };
  

  Please help me, thanks before

  You register your type after the staging, try to move the line to the top of the constructor qmlRegisterType().

• On 2015 (6.3) bridge output module - Windows 64-bit

  I realize there is a thread for the same problem on OSX - I just want to make one for Windows users.

  I can't load the module output in bridge - I downloaded the ZIP file that is necessary for 6.3 and installed the file/folder, as I have always done (as it reads) when necessary.

  I even had the pop-up within Bridge at the opening of this new after the update- but the output module is NOT displayed.

  I hope that this is addressed soon!

  Thank you.

  Hi Kevan,

  Please make sure that you have followed the below the article carefully.

  How to install Adobe Output Module in bridge CC

  Please copy the folder Adobe Output Module (not the folder AOM_Package_ [OS]) in the 2015 CC bridge Extensions folder to the appropriate location:

  • Windows: C:\Program Files\Fichiers Files\Adobe\Bridge CC 2015 Extensions

  Then copy the file AdobeOutputModule.workspace into the folder of workspaces under the bridge CC 2015 Extensions folder.

  Kind regards

  Gerard

• Output module installation bridge CC

  I recently installed bridge CC and it works fine, but I want to add the module 'exit '.  I downloaded the files from the page http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html but when I go to copy the files I can't locate a "bridge Extensions Directory.  How to get the module output installed and works?  I see people say to bridge CC of uninstall and install Bridge CS6 then reinstall bridge CC but I can't find Bridge CS6 either.  I really don't want to install an older version to get a newer version to work, there must be a better answer.

  Thank you

  I thought about it, it that the instructions from Adobe did not clearly (in my opinion) was 'what library' the top of the page to go to on your MAC computer.  If you go to your finder and select 'All my files' then go to 'Library', you will NOT see the bridge extensions directory and the output module does not work even if you make this directory and insert the files.  the directory will look like this:

  

  But if you go to the hard drive to the system level "in library", you will see a directory structure that looks like:

  

  Once at this place, copy files and restart the Bridge software and it will work, in any case on my MacBook Pro, this is the required no. CS6 case and it looks like this:

  

  Make sure that you are in the system directory (root level) or it won't work.

• I'm unable to install Adobe Output Module on my CC from ADOBE

  I do not see a path or file labeled Adobe Bridge Extensions CC, as the instructions state - what should I do?

  I see the output as an option because I added the file in my folder of the workspace. However there is nothing due to the

  the fact that my Adobe Output Module is not in the right place. Any help is appreciated! Thank you - Robbie

  Screenshots

  

  

  

  

  

  Hi Robbie,

  There are 2 different libraries. If you use the Option key pressed when you click GO, it takes you to the user's library. The other library requires that you start Macintosh HD in your list of drives. After clicking on Macintosh HD, you choose the library. It is not the same as the user's library. From there, it is Application Support > Adobe > CC bridge Extensions. He has record No. bridge before this record.

  > Unfortunately, the customer just takes me in circles and recommended that I post a message in the forums that I do. >

  Unfortunately, I've heard that many times before. You have to be absolutely certain that you are in the library of Macintosh HD and not the user library (that Apple is trying to hide).  If you copy the path of yohanna exactly, including slash, without Option-click on go, you should be in the right place. If she is not there, then I think it's something wrong with your installation.

  Is not not Adobe staff, who know far more about me, my next step would be to create the file, being very careful not to copy the name exactly, but that's because I've done this before in different circumstances and I couldn't say that it would be the right move this time. After you create the folder, I would follow the rest of the instructions for the download to install correctly. That's just what I'd like to try, because I don't have a lot of faith in customer service help, either. It works or it doesn't, no harm to your system by train.

• Script for the output module template load

  Is it possible to load the .aom with a script file?

  Or a way to create the new model output with a script module. There is saveAsTemplate() command, but how do I set up a template?

  From 2014 CC, you have access to the render and output Module settings. The details are here:

  http://blogs.Adobe.com/AfterEffects/2014/04/new-changed-after-effects-CC-2014.html

  Dan

• Error message @ boot Win 7 Pro "it was Aproblematique from C:\programdata\ofpviaowu.dat - the specified module could not be found."

  Error message @ boot Win 7 Pro "there was a problem starting C:\programdata\ofpviaowu.dat - the specified module could not be found."

  This error message appears whenever I have start my computer and windows starts (Firefox doesn't start up). 15.01 Firefox work properly otherwise.

  This started after I installed the 15.0.1 patch.

  I uninstalled and reinstalled Firefox but the problem remains. Search Google for "ofpviaowu.dat" came with "2012-08-29 Firefox version 15 startup Crash Report" as the only listing.

  Is this a Firefox problem?

  My system has this file: C:\ProgramData\Mozilla\logs\. I don't think that Firefox or update service should write directly to the root of C:\ProgramData\. It could be a configuration error, or it could be completely different.

  You may be able to remove your boot sequence problem .dat file using Microsoft Autoruns utility: Autoruns for Windows. If you find an entry, can describe you it?

• MSG for error in Windows 7: "unable to load DLL 'Gpib - 32.dll': the specified module could not be found."

  Hi people, I have a project in VB. NET (VS2010 specifically), which has been updated from an old VB6 project. The old project

  use Niglobal.bas and Vbib - 32.bas to communicate with the GPIB plugged into one of our litters.
  Now in the 64-bit Win7 with the Niglobal.bas and the Vbib - 32.bas converted to Niglobal.vb and Vbib - 32.vb,.

  I get an error when debugging to

  Public void RegisterGPIBGlobals()

  in the Vbib - 32.vb, the error msg says:

  Unable to load DLL 'Gpib - 32.dll': the specified module could not be found. (Exception from HRESULT: 0x8007007E)

  It seems like this Gpib - 32.dll, that I found under SysWOW64 on my Win7 is not designed for a 64-bit application and when I copy this dll file on

  C:\Windows\System32, the msg of error becomes:

  An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)

  So I think my question is double: 1. the drafting of my own app in VB. NET can I still use Gpib - 32.dll (including the Niglobal.vb and Vbib - 32.vb)?

  2 Will the application I am writing with .NET work in x 64 Windows 7?

  The Almighty gurus and Mods please help. Thank you!

  Hi Joel, thanks for the answer! I have the 3.0.2 driver.

  I was looking around for a while after I posted here and further in the use of NI4882 manual, page 4-4, I found this:

  «To bring an application in an environment 64-bit requires the application to migrate the NI4882 API and be recompiled.»

  So I'm ditching the gpib - 32.dll (vbib - 32 & niglobal) and currently I am using NI4882.dll and restructuring of my project.