Aerial images

What software Adobe is best suited for describing the properties and other sites (roads, lakes, rivers, etc.) on aerial images?

Photoshop is the gold standard bitmap editor, but a certain adobe programs can do.

Tags: Adobe

Similar Questions

  • Apple TV screensaver plays same aerial images repeatedly instead of rotate images

    News aerial Images as my ATV-4 play like screensavers, but instead of turning the images he continues to play the same ones again and again of love.  Sometimes it will rotate between two different aerial images and sometimes some times the same.  Called Apple support and they had me restart the ATV, but always shows the same images.

    From my understanding, the ATV has roughly 3-4 at a time. According to the frequency that you define new downloads, you will see the same 3-4 until the next download. That is, if you have defined for each day, you should get 3-4 new a day who write 3-4 yesterday.  But if you set it for every month you will have the same 3-4 every month.  My assumption is due to download the size and limits of the ISP. About 600 MB per download, it may be more some want to devote to "screen saver" rather than the music/movies...

  • Aerial footage shot with F55

    Hi all

    Here is a sample of aerial images, that I shot on NYC & Boston using my F55. The camera is mounted on my air exhibitions gyro stabilized platform in a Bell Jet Ranger helicopter. The last clip of the aircraft in flight was pulled from my previous camera (Varicam). I can shoot video air in the Northeast for those who need it and also have to sell or rent stabilization systems.

    Page 81 of the 3rd edition of CineAlta Magazine has an article and additional images of the helicopter and the system. See the link below.

    http://Issuu.com/sonyprofessional/docs/cinealta_issue_3__issuu?e=10444591/8709225

    Kind regards
    Arnie Itzkowitz
    (973) 838-4153

    http://youtu.be/R7leTn-svhw

    www.aerialexposure.com

    You should have downloaded the 4K on YouTube!

    What lens did you use? How do control you the zoom?

  • How to set a transparent color?

    I have a black and white linework (pdf plan of engineering) and I want to superimpose an aerial image and line it up so that show the black lines on the aerial map.  I can work with the transparencies of the layer, but what I prefer is to put white in the plan b & W at bottom transparent or transparent.  In the contrary case, it kind of gray on the antenna. Is there a way to just put a transparent color? I think I could do it before, but can't remember.

    If I understand you all what you need to do is use the advanced properties of layer. Double click on the plan B & W layer and use the mixture if slider to get the white background. Here's a red square on a white background, by adjusting the sliders on the right that the white background is removed.

  • Why the tool pen decided to stop letting shapes on the tour?

    I am tracking a series of squares of aerial images of buildings. After I updated my illustrator, the pen tool decided to stop to let me do this in a clean way. For example, I'm doing a sketch for a shopping centre, a floor plan based. I draw a square, my next shape is a rectangle. I hold SHIFT key to allow the tool pen anchor immediately above one of the anchors of the place. Previously, I would, and everything would be fine. Now I'm doing it, and the second that I create my next point, it forces the anchor first outside the anchor of squares. It also leaves not the features overlap each each other. He moves. So instead of having two squares which affect, suddenly 1pt. Where they touch is now 2pt because moving automatically forms without saying me it. So I get my tool of choice to move the points back where I had originally placed. I have no slam on. In fact, it feels almost as if it is anti slam anchors. With glance on this subject makes it even worse. What is going on?

    Here's an example, let me remind you that all these places are supposed to be of the same width and with a uniform wall. The stylus moves my anchors in all directions.

    Screen Shot 2014-09-29 at 4.02.25 PM.png

    Here is an example of how the front worked pen tool I have updated. Each section is an individual shape. But they overlap with ease.

    Screen Shot 2014-09-29 at 4.05.41 PM.png

    How can it be a bug in Rectangles to live when he said that it is using the pen to create the forms?

    Mr Nagoo, I suspect it is because you have "" Align new objects to the grid of pixels"turned on (see the wheel of Transform Panel menu).

  • crop the rotated video

    Hello

    We have a few aerial images taken by drone I needed to cap the horizon.

    IM new edition so used turn to correct.

    We were hoping not to have to increase the scale, so I was wondering what other approach, we could take?

    It seems that the question is how you can trim & video rotated the screen size? Lets say I have 10 degrees rotation, when I select to crop gets cropped with the angle of 10 degrees.

    Hope it makes sense.

    Thanks in advance

    Nesting the clip turned and harvest adds this nested sequence.

  • Insert "illegal" characters in file name for label printing?

    Hey all (Happy New Year)

    I actually see people here who have helped me with this there is responsible for so many years (Hello 'x'). Sort of, I use this .js file for annotate aerial images before printing, and I know just enough about scripts to make changes to the basic layout as the need arises - so far. A new retentive mgr rather anal don't like the replacements I did for some "illegal" characters that windows does not allow in file names. For example, the file name used for the annotation is:

    001 0003 1in = 660ft CFL 154_074 01-01014 503 - 013.tif

    But Mr. Bishop love not in, the ft and the use of the _ instead of a period (.), so what I need is a change that goes something like (and note that I DO NOT code, so stop laughing).

    "Find and replace by", find ft and replace by "and search for _ and replace by," so the final annotation written in the image is: ""

    001 0003 1 "= 660' CFL 154,074 01-01014 503 - 013.tif"

    My current .js is lower, I'd appreciate any help. Thank you! TLL

    ------------

    CREATE NEW CANVAS W/SPACE ON TOP

    var deltaW = 0; Add a "n" pixels to the width

    deltaH var = 150; Add "n" pixels to the height

    var anchor = AnchorPosition.BOTTOMCENTER; anchor point to resize canvas

    SET the FONT TYPE AND SIZE - use GetFontName.js to get the exact name

    fontName = 'ArialMT '; var

    var fontSize = 18;

    Check if a document is open

    If (documents.length > 0) {}

    var originalRulerUnits = preferences.rulerUnits;

    preferences.rulerUnits = Units.PIXELS;

    try {}

    var docRef = activeDocument;

    docRef.resizeCanvas (docRef.width + deltaW, docRef.height + deltaH, anchor);

    Create a layer of text on the front

    var myLayerRef = docRef.artLayers.add ();

    myLayerRef.kind = LayerKind.TEXT;

    myLayerRef.name = "Filename";

    var myTextRef = myLayerRef.textItem;

    ADD the FILE EXTENSION, change the n y below

    var ShowExtension = "n";

    myTextRef.size = fontSize;

    myTextRef.font = fontName;

    COLOR of the TEXT PUT in RGB values

    newColor var = new SolidColor();

    newColor.rgb.red = 0;

    newColor.rgb.green = 0;

    newColor.rgb.blue = 0;

    myTextRef.color = newColor;

    SET TEXT POSITION - PIXELS left first, then the top.

    myTextRef.position = new Array (30 110);

    Set the blending Mode of the text layer. The name must be in UPPERCASE

    That is to say NORMAL change to the DIFFERENCE.

    myLayerRef.blendMode = BlendMode.NORMAL;

    Select opacity in percent

    myLayerRef.opacity = 100;

    The following code deletes the extension and wrote tha text layer.

    fname = filename only

    Use the extension if the value

    If (ShowExtension == 'y') {}

    fname = docRef.name;

    } else {}

    di = (DocRef.Name). IndexOf(".");

    fname = (docRef.name) .substr (0, di);

    }

    myTextRef.contents = fname;

    docRef.flatten ("n");

    } catch (e) {}

    An error has occurred. Restore units of the rule, and then spread the error return

    to the user

    preferences.rulerUnits = originalRulerUnits;

    throw e;

    }

    Everything went well. Restore units of the rule

    preferences.rulerUnits = originalRulerUnits;

    } else {}

    Alert ("you must have a document open to add the file name! ');

    }

    Here is the replacement code:

    The following code deletes the extension and wrote tha text layer.
    fname = filename only
                   
    fname = docRef.name;
    fname = fname.replace(/in/, ' "') .replace (/ pi /, ' '"); "

    remove the extension if needed
    If (ShowExtension! = 'y') {}
    fname = fname.match (/ [^.] + /) [0];
    }

    fname = fname.replace (/ _ /, '.');

    myTextRef.contents = fname;

    I sent the entire file by PM. This should work if there aren't any typos.

  • Degraded mode tool Hue

    I have a bunch of aerial images that have a blue tint, rising to the top of the image, because of the atmosphere. Here is an example: http://imageshack.us/photo/my-images/146/img0431oo.jpg/

    Any suggestions on how to remove this blue tint? I tried to use the gradient tool in color mode, but instead of make a gradient, it seems to change the color of the entire image also. Thanks in advance.

    I hope you have some raw versions of this image, because I do not see any detail of color in the blue parts of the image.

    So, assuming you have the version with some info of color in the blue parts:

    Hue/color/whatever of 1Nouveaux adjustment layer

    2. Add a layer mask

    3 draw gradient in the layer mask / hand painted

    On a sidenote: personally I would not try to remove the plaster. It is normal for such images. It's a kind of casting that you have yet to see.

    If you do not want to once again, I suggest to dig into uv/colour/nd filters when you do another series of such images.

  • How to record dynamic images (RSS feeds) theme?

    Where does Windows 7 store the images of the dynamic theme?  I want to back up to an external hard drive.

    The topics in question are dynamic Bing and Bing aerial maps.

    Thank you

    Hi Bob

    The theme Bing aerial, the images are stored in a super hidden folder.

    The only way to access this folder is:

    1. open Windows Explorer.

    2 copy the following path:

    %UserProfile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\Enclosure

    3. paste this into the address bar and press ENTER.

    4. when the folder opens, you will see a folder with a long alphanumeric number. Double-click this file to open it.

    The images that have been uploaded will be in this folder. You can copy the images to another location from there.

    Note: You will see a warning of a possible dangerous file security. This is normal, since the source of the file is the internet.

    A better idea is to simply right click on this folder, select copy, and then paste it on the desktop. From there, you can rename the copied folder and place it where you want.

    Kind regards.

  • Strange question on export: time-lapse images fades after export

    I'm doing a video where I speed up a bunch of images 1000 to 2000%. When I play in the timeline, it seems normal. After that I exported it, however, it's blurred.

    In the export settings and clip, "Interpolation of time" has the value of aerial survey.

    The layer source footage is h.264 QT 29.97 FPS, export file is the same.

    Anyone know what is happening?

    You export the file as an interlaced (upper or lower field order)?

    If so, try to export the file in progressive format (order of progressive value fields).

    MtD

  • Merge multiple images into a single file

    Hi all

    I am writing because I need to merge multiple images into a single file and do not know how.

    I need to create a large table with several aerial photographs, so I didn't need to create a panorama, but I would like to use an automatic procedure to merge the images because they are many.

    Can you help me??

    I tried photomerge but it creates more levels without ordering the photos...

    If all the files are the same size, there is a script "File Stitcher" @ http://www.ps-bridge-scripts.talktalk.net/

  • Insertion of images of 1280 x 720, with stabilizer chain, sequence of 1920 x 1080?

    I'm editing a short documentary using the premier CS6 and 1920 x 1080 images. I want to insert sequences aerial that is shooting at1280x720 and I used the warp stabilizer to reduce shake them. What is the best way to insert these images stabilized in the sequence of 1920 x 1080? Thank you.

    Stabilized sequence of 1280 x 720 in a 1920 x 1080 nesting works very well.

    Create a 1280 x 720 clip sequence using the "new sequence of the clip.

    apply warp to the clip stabilizer.

    Drag the sequence in the project of sequence of 1920 x 1080 Panel. You can right click on the sequence and select "adapt to the size of the image" to fill the frame entirely.

  • How to chop each fifth image (or even the motion)

    I have a large collection of cheap real aerial sequences, but most of the clips have a strange problem, and acquired the images also, so they can't fix it.  (Apparently I'm the first person to notice the problem).  Every fifth image is a repetition of the previous image, there are four images facing forward, then stop, then four other executives forward.  The slow footage is not very sensitive (I can see it yet, but regular viewers don't seem to notice), but on more rapid motion, he gives him a nervous look that is distracting.  I would like to delete the redundant images, and I hope I won't have to make a frame at a time by hand.  (After the frames are removed, of course, the clips will be 20% shorter, so if necessary, I will then slow down and let AE re - interpolate the movement.)  The question is: does anyone know of automated way to remove the images?

    I have AE CS4 (and Premiere Pro CS3, if it's any help with this), running on Windows XP.

    I agree with the previous poster. Looks like a pulldown has been introduced in the wrong way. Try the respective options in the dialog film interpretation, leaving the rate at 30 or 29.97 fps, but by choosing a model drop-down menu, then place it in a model of 24 fps or 25 fps. I don't know that it will disappear with the help of one of these combinations. also give some attention to questions of possible field.

    Mylenium

  • Problems with still images

    Hi all!

    Since upgrading to FCP 10.2.3, 80% of my images still in the movies and work, the other 20% weird color lines to this topic, see the image below.

    I tried to re - register and again add the media to the event, etc. and also deleted the files generated rendering library that did nothing.

    Thank you

    This means that your gpu is unable to manage these photos. Try to use the smallest size photos if possible. If you don't need to zoom in on them there is no need to use photos that are much larger than the size of the image. Tell us your details specific mac and os and fcpx version.

  • Apple Watch (1st version) flashing background image

    I have a first generation of Apple Watch.  I recently did the upgrade to the new operating system for watches.  I have a picture as my background.  Since the update, when I turn my wrist to me, to "turn on" the face of the watch, it a little 'flash' thing she had ever done before.  It's a quick way, irruption of the image of the picture on my watch that then remains on the image.  Has anyone else seen/noticed does this?

    Hello

    The following steps may help:

Maybe you are looking for