After 10 minutes, my computer seems to go into the mode "sleep" for no reason.
The monitor power light starts to Flash. The computer seems to be running, but it does not start back upward. I have to re - start the machine by turning it off and back on. I wonder if it's a software problem or virus?
Hello
I suggest you to follow these steps and check if that helps.
Method 1:
I suggest you try to run this under fixit and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems
Method 2:
Also, try to update the latest drivers for the graphics card and check if it helps:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
It will be useful.
Tags: Windows
Similar Questions
-
I made all the necessary adjustments to get the computer automatically go to sleep after inactivity but now it not to do so. It is used to do. I have Windows 7.
Hello
Maybe this will help:
Windows 7 is not going to sleep<-- check="" this="">-->
http://support.Microsoft.com/kb/976877----------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------
More that might help.
References to Vista also apply to Windows 7.Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
Modem and so on.Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htmTroubleshooting Windows Vista sleep and Hibernate (also Windows 7)
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
(also Windows 7)
http://support.Microsoft.com/kb/950686Sleep and extended: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questionsMay need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Standby Mode Vista and a solution (also Windows 7)
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730
How to restore the default settings of the power Plan in Windows 7
http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html
How to change the power Plan settings in Windows 7
http://www.SevenForums.com/tutorials/778-power-plan-settings-change.htmlHow do I change the sleep settings in Windows 7
http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx
How do I change the sleep settings in Windows 7 (including hybrid sleep)
http://www.brighthub.com/computing/Windows-platform/articles/60294.aspxPanel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)May need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Hello..
After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)Hello
1 windows operating system is installed on the computer?
2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?
3. What is the number of brand and model of the computer?
Method 1:
If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.
Windows wireless and wired network connection problems
The link applies to the Windows Vista and Windows 7 operating system.
Method 2:
Check the link and try using the network troubleshooter to fix the problem.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
See also:
Use Network Troubleshooter event logs to solve network problems
Method 3:
See the link and check if it helps.
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Let us know if it helps.
-
SP U400 - cannot return to the desktop after entering in the mode 'sleep' by closing the lid
Satellite Pro U400 V-11 I used for a week. I don't know if this is a problem or I did something wrong. My setting of closing the lid is recording mode "Eve" in Vista.
When I close the lid and open a few minutes later it's ok, I see the password login screen. But if the computer is in "sleep" for a while it does not return to the office when I lift the lid. The screen is black. Fan started working then quiet several times.
The first three LEDs on the left are green. Keyboard does not respond. And also switch / stop does not work either I press once on or hold it. And only after I unplug the power adapter and press the power, it works. But it restarts the system and Windows could not close correctly the error message is displayed.
Is this normal or something wrong with the mode 'sleep'?
Thank youHello
I read on some of the similar problems regarding "standby" mode and the black screen.
Someone suggested to update the BIOS and the display driverSo I highly recommend it too much
See the European driver of Toshiba page, choose the model right for laptop and try to update the BIOS, then the display driver.Reboot the laptop and see if the problem still occurs.
Good luck
-
P2715Q, Windows size and location change after the mode 'sleep'
Hey
After that the monitor wakes up fashion 'sleep', all the windows are in the upper left corner and in different size just before going to sleep. It makes me crazy. Did not help. Found a few registry hacks key, but it can't be that difficult.
I use following:
View P2715Q Dell, Windows 10 Pro GTX 1070
Everything is up-to-date.
Really hope you can help me!
#update 1
It has something to do with how long the mode 'sleep'. I set the Sleep mode function 1 minute, whereas the display 'falling a sleep' and woke up after 30 seconds or more. Everything was in place.
This isn't a question of monitor. It is a video card driver problem. Tiles from 1920 x 1080 uses two P2715Q sewn together by the video card driver to get the resolution of 3840 x 2160. So if the video card driver is slow to initialize the awakening from sleep mode, all open windows and icons are tossed at top left. We see this issue "tile" on AMD and Nvidia drivers. All you can do is to continue testing video card drivers latest when they are released.
Workaround solution =
* Spend 90% of your icons to the taskbar or the far left background
* Close all open windows before allowing computer standby modes -
When I open a web page any using firefox, its ok for a few minutes, then he opens another page saying it is redirected for no reason at all, the homepage remains open, but the other page start for no reason at all in another tab
It's very consistent, he arrives a few minutes? In this case, I suggest this test:
To find out if one of your extensions is the culprit, could you test mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.
You can restart Firefox in Mode safe mode using either:
- button "3-bar" menu > "?" button > restart with disabled modules
- Help menu > restart with disabled modules
Not all add-ons are disabled: Flash and other plugins still works
After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).
Any difference?
-
L750D-1DQ satellite - black screen after the mode 'sleep'
My new laptop L750D 1DQ does not start correctly after the return of the mode "Eve".
The screen is very dark, I can't seem to clear up.I tried the combination FN + F7, but it does not work (and other shortcut keys do not work ether).
When I restart, the screen works again.What must I do, so I can start to work after returning from the mode "sleep"?
Hello
You are able to change the brightness in Power Options Win 7?
Check this box:
http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htmYou can choose a power plant that is enabled in the profile of power you use.
You will see the option to adjust the brightness of the plan.
Set the control to the right to increase the brightness. Do this for setting battery and area settingIn addition, you should go to advanced-> display settings
Here, you must choose the brightness of the display and need to change the value of %. This defined the default display brightness when battery and AC power running -
keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium
keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium. I received once posted this question, an answer of "fix" to a thread that has worked. Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything. Could someone please re - send the wire? I promise you that I'm deleting it this time.
Thank you very much
E-mail address is removed from the privacy *.
Hi RICH0214,
Follow these methods.
Method 1: Follow the steps in the article.
Device Manager does not display devices that are not connected to the Windows XP-based computer
http://support.Microsoft.com/kb/315539 (applies to Windows Vista)
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Create a new user account.
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.
Hello
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html============================================
After the foregoing: a Fixit for Hibernate
How can I enable hibernation on my Windows Vista computer?
http://support.Microsoft.com/default.aspx/KB/929658How to reactivate the lack of Hibernate Option in Windows Vista?
http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/-------------------------------------------
More if necessary:
Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlPanel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / offMay need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
HDD turns off after the mode 'sleep'?
I would like to know if the hard drive would turn out or not after the mode 'sleep'.
Does anyone have any suggestions?
Thanks in advance for your suggestions :>
The computer do not hibernate unless it stops the disc after writing the hibernation file.
Mode for similarly low-power stop discs 1
-
If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?
Hello1. have you made changes on the computer recently?
Method 1.
Type these commands in the start menu, run a dialog box:
Here's how:
a. Click Start.
b. in the run box, type the following commands one by one and press to enter.regsvr32 dfrgsnap.dll
regsvr32 dfrgui.dll
Method 2.
I. to resolve this problem, follow these steps:a. Click Start, run, type % Windir%\Inf, and then click OK.
b. right-click the dfrg.inf file and then click on install.ORII. Alternatively, you can reinstall Disk Defragmenter using the following command:a. Click Start, run and type that the following command and press ENTER.Rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\dfrg.infI hope this helps. -
Have Vista Home Premium. When I put the computer on the mode 'sleep', it closes and moves to the State of low consumption with the screen. But in a few seconds without touching the key or mouse it starts again. What is going on?
Hello
See if this information helps you:
"How to restore the default power Plan settings in Vista"
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
"How to solve a problem of Mode Vista or Windows 7 sleep"
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html
See you soon.
-
ulitmate local Vista only after the mode "sleep" loses the IP address each time.
Ulitmate Vista wired ethernet. After the mode 'sleep', 'local only' on awake. Loses to IP address each time. IP address needs to be reset.
Hi C.Jaye,
You can check out the following link and try the steps to solve the problem:
You can also read the following article and check if it helps:
Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I have all the Adobe Creative Suite with all the programs installed on my mac, I bought a new mac and go to sell the need for others, but I have to get the programs on the new computer and I also lost the serial number for it, what can I do about it?
-
Computer won't turn on after the mode 'sleep'
My computer acted funny lately when it goes into mode 'sleep', and I have to reboot it until I can do something new. I know I'm not the only one having this problem, I've read the other posts on this problem. Anyway, my keyboard has a sleep button that I brush occasionally, that causes all this to happen. However, I brushed it today, and instead to go just in a coma, the computer entered into mode 'sleep' (the light was orange, noise died down), then woke up to the top in a way where the fan on, but the light went off. I've forced to close and then turned back on. Now when I turn it on, the light and fan both going on, but the monitor remains off, and none of the lights on the keyboard lights up. Is there a simple solution to this, or it will need repairs?
Hello
Were there any changes (hardware or software) to the computer before the show?
Perform the steps from the link below.
The problems of wake the computer from sleep mode
Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.
Reference link provided below for more information:
BIOS: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions
Hope this information helps.
Maybe you are looking for
-
iTunes freezes when iPod Classic is connected
Today, I put music on my iPod Classic 160 gb... the files transferred and I just change some information in iTunes at the same time and iTunes froze and then I had to reboot the computer... now two things happen: 1. the music on my iPod has been clea
-
Purchase new mac pro, processor speed or hardrive book size?
I am looking to buy a new mac book pro with the retina. I was curious, I have to spend money on a bigger hard-rive (ssd 128 256 or 512) or switch on the processor speed 2.7 or 2.9?
-
Help. Cannot open all windows programs
I don't know what happened, but everything that I try to open on my laptop gives me the message "Windows cannot open the specified device, file, or path. May not be the appropriate permissions for access you to them. »All use or advice would be appr
-
Black screen - cannot run Explorer.exe with Task Manager
Hi guys I've been Googling the answer to that for the last day and nothing seemed to work. Basically, my portable was working fine until this morning, when I restarted. After the home screen, just a rear screen with the mouse. CTRL ALT DEL and everyt
-
14/01/2016 of each update has failed me
Original title: update 01/14/2016 of each update failed me , I do not know what's going on , but I'm really weird.