After 12.2 terribly slow effects

Similar Questions

• My IPhone 5 is glitching like crazy, it is up to date in the software, but is terribly slow. When I go to type or press an app he refuses entery, instead he types something I never wanted to or goes into a format or a different application. It freezes con

  My IPhone 5 is glitching like crazy, he refuses to penetrate me app I press and does not allow me to type. Instead, it goes into another framework or format or type something I never wanted, otherwise keep it delete or reset. It freezes constantly and is terribly slow and driving me crazy. The software is up to date and I tried resetting the phone, turning point market and removing unnecessary applications... what should I do?

  Make an appointment on the Apple store nearest to have rated iPhone.

  Once the diagnosis is made, staff will explain your options.

  Make a Genius Bar reservation

  http://www.Apple.com/retail/Geniusbar/

• My new HP Pavilion with windows 7, I bought recently is terribly slow download?

  I recently upgraded to Windows 7 and bought a new HP Desktop Pavilion. It's terribly slow download.  So slow, the computer falls asleep before the download ends.  Windows 7 sucks. Is there a solution?

  58elmer wrote: I tried to download "Speed test" yesterday and there never load.  My computer would go to sleep before downloaded it.  I have "Snipit", but need to learn how to use it.  Thanks for the info. Elmer

  Hello 58elmer, you could try go to Control Panel Power Options, Information of Performance tools and select it in the top left of the screen, change when the computer sleeps. Put forever.

  Then select choose when turn off the display. Indicate what ever.

  Then to close these windows, and on the desktop, right-click on the desktop and a menu will appear which shows a screen saver. Click on the screen saver and select None.

  All these parameters will keep your locking system and can allow you to run the speed test and also to use the tool captures Windows 7, which can be accessed at the beginning, all programs, accessories, Snipping Tool.

• Muse 2015.2 work terribly slow

  Hello!

  This is my second post today, while I solved my first problem, this is bugging me for a while now. I use Muse a lot, I design themes of muse and Web sites for the company that I work. Recently, I switched to an iMac 27 "a lot more low spec PC. I thought that it would speed up the process and I can design Web sites for the FHD screens. But the first time I run Muse on iMac, it worked terribly slow. Even slower than before on the Windows PC. I looked at this issue and some suggested that Muse is not optimized to use the high resolution. So, I stopped using it full-screen, what actually makes a difference. Everything is lag if I use Muse to full screen, but not if I do smaller. The more I do, smooth, it works. But still doesn't work, it is slow as the iMac is powerful enough to manipulate Muse.

  Now I feel another kind of slow. A page with just a single image and text takes a long time (at least 3 minutes) to refresh. The file of Muse is just 42 MB in size with 17 pages and only 54 images in total. I also have another problem. Muse does not connect with the FTP server. There is no error when trying to connect, the guard just icon spinning. Please help me to solve the problems.

  Thank you!

  You seem to have several problems with Muse, and it seems that they are not related.

  Please send me your Adobe ID, location, and phone number on a private message. Click on my picture and use the Message button. We will contact you to help.

  Thank you

  Preran

• Terrible slow short captured SBS2003. I really mean sloooooooooow

  Recently, I captured a SBS2003 for testing purposes. The vmdk files are 67 GB and 256 GB in size and are stored on a USB3.0 HDD (2 TB)

  I run the VMworkstation on Win7x64 8 GB Ram-8core-Intel7.

  The SBS is configured as 1 processor, 2-wire, 2 GB of RAM, I unplugged all the serial ports and set a new virtual network.

  Whan I start the machine takes so long, graphic move terrible slow and twangy, locking even my mouse to him take a long time. I can't work like this. Any hint why this happens? Is the size of the disk for the virtual machine too?

  How do "capture you" SBS2003?

  Windows uses the correct HAL?

  There is no problem with the sizes of virtual disk, but the 2 TB USB drive is probably you slow down here.

• Blur of the lens not no projection in after the release of 2014 effects CC

  Hello

  As I am new to After Effects - environment video Copilot I can't understand this is why, after the plugin in the effects folder I do not blur lens Effects > blur and sharpen > Lens Blur?

  I'm working on the project named ParticleDesign which can be found here. How can I solve this problem?

  I see that Camera Lens Blur as the only close effect Lens Blur blur...

  There has not been a lens blur effect in After Effects for several versions. It has been replaced by the Camera Lens Blur years effect.

• Web server on ESXi terribly slow! same fee install works uber quickly on a single physical server.

  I have created a virtual machine and allocated 4gig of RAM, 2 cpu and no limit on the CPU usage.

  Freshly installed Centos5 and LAMP. Installed joomla with default content.

  Browsing the site is TERRIBLY slow... I'm talking molassas.

  Now, until people start blaming joomla, I had exactly the same fees installed on a physical server with less specs (only 1 GB of ram and 1 cpu) and it is lightning fast.

  Both are on the exact same network. And the ESXi server has only a current PBX VM to run other then the Web server. I have hordes of resources left and available on the ESXi server.

  I can not quite understand what the problem is or could be. She has available resources and doesn't have 1 million waiting to go through the server process. My Network (2) cards are defined in tandum (I guess that the combination of network cards?) this should not be a problem?

  It's just the way the esxi manages the inbound and outbound traffic? Is this normal? The only thing I can reduce to is 1) the esxi way itself works. (2) the esxi way treats my network cards and or traffic

  What are the specifications of the ESX Server - hardware and CPU? Are there other virtual machines running on ESX Server? Have you tried running with one virtual CPU virtual machine?  It is advisable to start with a single vCPU and add vCPUs only if it is necessary, or if you have empirical evidence that it is necessary - it has to do with how the virtual processors are programmed.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Is there a difference first and after the Performance of the effects in terms of CPU intel or AMD?

  Is there a difference first and after the Performance of the effects in terms of CPU intel or AMD?  Forget about the speed issue, assume that the processors are of comparable speed and also assume that the system is built beyond recommended configuration.  When it comes to reliablility and performance of each processor, work and managing data with CS5 is there a difference?  I am looking to build a computer with several CPU i7 so if outside as well (unless you can convince me that don't have a single processor is better than building with multiple) thanks for reading and I look forward to any help you can give me!  Bow.

  The test of disk i/o is 59; 58; 00, the MPEG2-DVD test is 2; 36; 04 and H.264 test - BR is 52 00

  What does it mean in real life? Hard to say how to look your timelines of real life and how leading practice comparisons, but I think that the H.264 timeline is much more demanding that 95% of users would meet. If you have CS5, you can download the ZIP file and take a look at all the effects and transitions used with alterations of Bezier curves in many and with all the different formats used in a single edit.

  There is one thing that you should keep in mind. The MPEG2-DVD H.264 - BR are directed to display the CPU/GPU performance and memory, but in real life, exporting to BRD involves also large (20 + GB) exports the disk, one of the things not measured in these two tests. This means that the high score of Juggernaugt in the H.264 test is only part of the story. We must also study the performance of disk i/o when exporting large files.

  My disappointing score on the H.264 test is caused by the lack of carrots, the memory and the cache limited on the 920. OTOH, price/performance wise I know that I prefer my setup the Juggenaugt.

• HP ENVY tilted 23-k000a Touch: terribly slow internet wifi after upgrade to win8.1 - ENVY tilted 23-k000a Touch

  I bought a few weeks ago.

  After upgrading to win8.1, I noticed the speed of internet was slow, I'm on a connection "Ultra-fast VDSL" yet all downloads by wireless are 15 to 25kbs max.

  If I connect the cable to the modem and disconnect the wireless connection, I get 200 to 300 kbs as I should, but then my game of Ryan box can't find my computer, as soon as I reconnect wireless it can.

  OK, maybe two questions here, but to start I would like to help to get the connection wireless operating at the speed it should.

  Thank you, John

  Maybe I should say kBs...

• updated my iMAC 7.1 with 4 GB of memory with the intention to go to El Capitan, but after reading how it slows down the speed, I was wondering if going to Yosemite is a better choice.

  Updated my iMAC 7.1 with 4 GB of memory with the intention to go to El Capitan, but after reading the slowness becomes the MAC, it would be best to go with Yosemite?

  If you upgrade the amount of RAM your iMac should be able to handle El Capitan nicely.

• MacBook Pro mid-2014 terribly slow

  My mac has been slow for the past 3 weeks at least.

  For example, the key of the train and take a long time to appear when I type them or resize a window accuses as well.

  1 month ago I diagnosed an activity monitor and found that a cloud of Photos.app synchronization process uses all the RAM. I killed him, and my mac was running super smooth again. But he returned to be slugish, and now I can't find what it is :/

  I did an Apple hardware test, found nothing.

  I created a second user account, it is trolling.

  I never installed MacKeeper (ugh!).

  I think it might be the GPU or RAM.

  Here is the log from the Console

  http://pastebin.com/5fUPrjrV

  And here's the Etrecheck

  http://pastebin.com/KKnd4mFj

  Clues?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The procedure is easy to do right, but it is also easy to do wrong, so I had very detailed instructions. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "GitHub") in Safari. Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

     Test started

    Part 1 of 4 done at: … sec  …  Part 4 of 4 done at: … sec

    The test results are on the Clipboard.

     Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• After problem pressure pen Wacom effects CC...

  Hello Experts :-)

  I'm having a problem with the function of painting in after effects CC 2015.3 when you use a Wacom tablet. Basically, the pressure of the pen does not work.

  Please note, that only happens in After Effects, Photoshop and illustrator are fine with the Wacom pressure sensitivity and work as expected.

  So far, I have:

  • Removed and reinstalled the drivers Wacom - no effect.

  • Trashed after effects Prefs :-(- no effect

  • Tried a new wacom - still the same

  • Has tried the new Pen - still the same

  OS: I'm on a new (end 2013) Pro Mac under OS X El Capitan

  Feature: The Tablet is a Wacom intros Pro

  Software: After Effects 2015.3 CC

  Any help to solve this is greatly appreciated.

  Thank you

  Good news Wacom have to get in touch and sent a link to a more stable older driver, which has solved the problem of the pressure of the stylus in After Effects and so far no problem in illustrator! Hope it stays like that.

  Link to the driver

  Link to Pdf on how to uninstall the old drivers

  If this does not work I suggest you get in contact with Wacom, the driver they send may be specific to your configuration of software / OS.

  Good luck!

• After the camera of the effects on the curve

  Hi all I was wondering how I had to pass a camera after effects along a curved line line or orbit around a sphere.

  There are a lot of techniques. To place in orbit a camera, you can use the built-in commands menu layer > camera > create orbit Null then comes to animate the rotation of the null value. It's basic AE stuff and you'll find a bunch of more resources if you type camera animer animate using EI search scope, see the resources of the community.

  Here are some videos I've done which will give you some very simple techniques:

  And this one which shows how to use a mask path to a path of the camera:

• Voiceover first clip of bad quality, after export only. Audio effects involved. How can I fix it?

  All the sound quality is as desired in the timeline panel during the first edition. After export, the first clip in voice-over ONLY, now has a dominant white fuzzy noise. If I delete this clip and export, the clip that was the second, but now first, inherits the problem.

  The video below has the original "first music video" removed, to show that the problem persists in the new video for first, which was previously the second and previously sounded very good. Each "phrase" or an "expression" is on his own audio clip, on the same track.

  Also note that the sound quality of the music is great in each. In addition, the quality of the voice is perfectly fine in all the remaining 3 minutes of video.

  From what I can tell, it's like audio effects have not been applied to the item first, after export. I use DeNoiser, dynamics and Volume of the channel in the whole of the audio track of the set (as opposed to each individual clip) voice. When I apply effects to each of the first 3 clips and place them on a separate track, and export, all 3 clips have the problem of white noise.

  I guess that the effects take some time to 'register' and so when effects are applied to the entire track this should happen only once. But just who does not sense that this is a permanent problem or every video ever made by creating using DeNoiser and dynamics would have this problem!

  What Miss me? There must be a way to solve this problem.

  Here is a screenshot:

  

  I use version creative Cloud, Adobe first Pro CC 2015

  I exported with the following parameters:

  H.264

  Format AAC, AAC Codec (tried MPEG and Dolby as well)

  48000 Hz

  Stereo (tried MONO as well)

  High quality

  320 kbps bitrate

  Bitrate priority

  Make maximum use

  
  

  Thank you.
  

  WORKAROUND SOLUTION:

  I used both your advice to a solution that WORKS. Simply, I moved all the audio on this track 5 seconds back and insert an audio clip arbitrary at the beginning of the track. I then exported audio on one. WAV file. I imported the. WAV file in the project and trim the beginning (with the arbitrary clip) back to what is supposed to be the beginning of the audio.

  The arbitrary clip inherited the problem and the remaining clips are great. They reside on a track that has no effects applied, as the. WAV files retain the proper sound quality.

  Also, I've read just after this operation that checking the box "Freeze" can cause the denoiser to apply instantly. I've never tried, but if it works, it's probably a simpler solution.

  Thank you.

• After the responsiveness of space effects

  Hello

  I have currently updated to CC2015 and since then I had problems with the naked head of reading/space reactivity in AE. I somethimes must press space 3 times to stop the playback head. Very annoying. Seems that there is someone having the same problem in first CC2015:

  CC2015 - responsiveness of the SPACEBAR

  But there's no solution. Someone else?

  It seems that AE reacts, because the 'RAM game' and fps in the Info Panel meter meet the SPACEBAR (soon disappear, as if the playhead stops. "But the reading head is run).

  I'm running on Win8.

  Assumptions?

  The corrections after effects CC 2015 (13.5.1) update is available, with great difficulty to previews and more: http://adobe.ly/1Il5JYe