Terrible slow short captured SBS2003. I really mean sloooooooooow

Similar Questions

• My new HP Pavilion with windows 7, I bought recently is terribly slow download?

  I recently upgraded to Windows 7 and bought a new HP Desktop Pavilion. It's terribly slow download.  So slow, the computer falls asleep before the download ends.  Windows 7 sucks. Is there a solution?

  58elmer wrote: I tried to download "Speed test" yesterday and there never load.  My computer would go to sleep before downloaded it.  I have "Snipit", but need to learn how to use it.  Thanks for the info. Elmer

  Hello 58elmer, you could try go to Control Panel Power Options, Information of Performance tools and select it in the top left of the screen, change when the computer sleeps. Put forever.

  Then select choose when turn off the display. Indicate what ever.

  Then to close these windows, and on the desktop, right-click on the desktop and a menu will appear which shows a screen saver. Click on the screen saver and select None.

  All these parameters will keep your locking system and can allow you to run the speed test and also to use the tool captures Windows 7, which can be accessed at the beginning, all programs, accessories, Snipping Tool.

• My IPhone 5 is glitching like crazy, it is up to date in the software, but is terribly slow. When I go to type or press an app he refuses entery, instead he types something I never wanted to or goes into a format or a different application. It freezes con

  My IPhone 5 is glitching like crazy, he refuses to penetrate me app I press and does not allow me to type. Instead, it goes into another framework or format or type something I never wanted, otherwise keep it delete or reset. It freezes constantly and is terribly slow and driving me crazy. The software is up to date and I tried resetting the phone, turning point market and removing unnecessary applications... what should I do?

  Make an appointment on the Apple store nearest to have rated iPhone.

  Once the diagnosis is made, staff will explain your options.

  Make a Genius Bar reservation

  http://www.Apple.com/retail/Geniusbar/

• That really means the vertical range? And the gain factor?

  The NI PXI-5102 digitizer: that means vertical range really means, it is the range of voltage of the signal to be measured or the signal to the ADC input terminal?

  How to control the gain of the digitizer? And what are the factors that can affect the gain?

  The portrait is located between the valid entries range of the digitizer on that channel.  If you set the interval to a value that is not valid, it will be converted to the next highest value.  This is the way you control the gain of the digitizer.  It is easier to define the vertical range on the maximum expected range of your input signal and allow the driver to NO-SCOPE compel the beach to the next highest value.  This allows you to use your code effectively with more than one type of digitizer (5102 and 5112).  For example, you know that your input signal has a range of 3 v (+/-1.5V).  Set the vertical range at 3.  OR-SCOPE that will force to 10V, the next beach valid more high for the 5102.  You can find the valid vertical beaches for your device in the folder of Documentation OR-SCOPE in your Start menu or online.

  Mitigation on your scope probe will affect the vertical range of the device.  If you have a 10 X probe and defined the vertical range to 10, the actual vertical scale will be 1.  You can have NO-SCOPE figure that out for you by setting the mitigation of the probe with vertical Configuration.

  More information on the routes of entry, and gains are available in NO-SCOPE help about using vertical configuration.

• Muse 2015.2 work terribly slow

  Hello!

  This is my second post today, while I solved my first problem, this is bugging me for a while now. I use Muse a lot, I design themes of muse and Web sites for the company that I work. Recently, I switched to an iMac 27 "a lot more low spec PC. I thought that it would speed up the process and I can design Web sites for the FHD screens. But the first time I run Muse on iMac, it worked terribly slow. Even slower than before on the Windows PC. I looked at this issue and some suggested that Muse is not optimized to use the high resolution. So, I stopped using it full-screen, what actually makes a difference. Everything is lag if I use Muse to full screen, but not if I do smaller. The more I do, smooth, it works. But still doesn't work, it is slow as the iMac is powerful enough to manipulate Muse.

  Now I feel another kind of slow. A page with just a single image and text takes a long time (at least 3 minutes) to refresh. The file of Muse is just 42 MB in size with 17 pages and only 54 images in total. I also have another problem. Muse does not connect with the FTP server. There is no error when trying to connect, the guard just icon spinning. Please help me to solve the problems.

  Thank you!

  You seem to have several problems with Muse, and it seems that they are not related.

  Please send me your Adobe ID, location, and phone number on a private message. Click on my picture and use the Message button. We will contact you to help.

  Thank you

  Preran

• What this really means that something is "unsupported"?

  There is something that is possible to do so (for example using Tech Support Mode on ESXi 4.0) but is considered "not supported".

  It is obvious that Vmware does not recommend to do these things. My question is what does this really mean?

  If I'd a configuration not supported on my host - the crowd will become "not supported"?

  And that would mean - is that Vmware will refuse to help not at all or that they are unable to guarantee that a certain problem can be solved?

  Well, you'll get certainly VMware support if you make changes via the Tech Support mode. However IMO resolution would depend on the damage is done (changing the configuration, the corruption of data, etc.) on the server, if things are irreparable you could end of relocation or losing configuration data.

  Kind regards

  F10

  VCP3, VCP4, HP UX CSA

  http://KB.VMware.com/

• Web server on ESXi terribly slow! same fee install works uber quickly on a single physical server.

  I have created a virtual machine and allocated 4gig of RAM, 2 cpu and no limit on the CPU usage.

  Freshly installed Centos5 and LAMP. Installed joomla with default content.

  Browsing the site is TERRIBLY slow... I'm talking molassas.

  Now, until people start blaming joomla, I had exactly the same fees installed on a physical server with less specs (only 1 GB of ram and 1 cpu) and it is lightning fast.

  Both are on the exact same network. And the ESXi server has only a current PBX VM to run other then the Web server. I have hordes of resources left and available on the ESXi server.

  I can not quite understand what the problem is or could be. She has available resources and doesn't have 1 million waiting to go through the server process. My Network (2) cards are defined in tandum (I guess that the combination of network cards?) this should not be a problem?

  It's just the way the esxi manages the inbound and outbound traffic? Is this normal? The only thing I can reduce to is 1) the esxi way itself works. (2) the esxi way treats my network cards and or traffic

  What are the specifications of the ESX Server - hardware and CPU? Are there other virtual machines running on ESX Server? Have you tried running with one virtual CPU virtual machine?  It is advisable to start with a single vCPU and add vCPUs only if it is necessary, or if you have empirical evidence that it is necessary - it has to do with how the virtual processors are programmed.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• New machine install, terribly slow response

  I hope someone can shed some light here, I recently built a new NLE for CS5.5 and the thing incredibly slow to load, encode or even responding to an export order.

  A few specs on the new machine:

  Dual Xeon 3.47 GHz 6 core CPU, total 12 hearts, in total 24 logical cores

  Supermicro X8DTL motherboard, intel 5500 chipset

  Registered 24GO RAM in triple channel mode

  Win7 Pro 64 bit with all updates

  Matrox MXO2 capture/playback

  NVIDIA GTX 580 4 GB video card

  Intel LSI MegaRaid SATA raid controller

  Matrix RAID 5 7TB on the RAID card

  Installed software is 5.5 CS suite, Avira anti virus and the Firefox web browser.  In addition, it is a clean installation

  Now for my problems.

  First usually takes about 2 minutes to load from the desktop and is slow to respond after that.  I loaded a second HD 40 consisting of 2 video clips XDCAM HD timeline and a piece of stereo music.  When I export this simple timeline it takes 3 minutes for encoding options to appear, and then once I selected BluRay HD for the screening and the queue, it takes 3 minutes before the launch of Media Encoder.  At the time I write this Media Encoder has been coding for 30 minutes and it is only about 50% done with this second 40 timeline.  For comparison, my old laptop dual core with its unique internal drive takes about 30 seconds to launch the first (CS4 in it's case) and it encodes the same timeline in 4 minutes approximately.

  Something is very wrong here; I hope it is something simple like a bad setting.  The computer itself seems to work very well, and index Windows benchmarks 7.8 outside a C drive slower, to settle at 6.  All material of the project is on the RAID and the programs and the BONES are on the C drive.  Someone at - it ideas?  I'll have to get started on a great project soon and I can't imagine doing on this machine as it is.

  Scott Cooper

  Seehorse video

  Well, I'm getting there with the support of Matrox.  The horribly slow response seems to be largely corrected by disabling the sound surround in the encoder as detailed here:

  "If you find that the switching export format in the export settings dialog box.
  box sometimes takes a lot of time, such that when you switch from Microsoft
  AVI in MPEG2-DVD, rename the SurCodeWrapper.vca file on your system
  (for example, rename the SurCodeWrapper.vca.bak file). This file is
  usually installed by Adobe Premiere Pro in the following folders:
  $ Files\Adobe\Adobe first Pro CS5\MediaIO\codecs\
  $ Files\Adobe\Adobe Media encode CS5\MediaIO\codecs\
  Be aware that after you rename the SurCodeWrapper.vca file, you will not be able
  to export the audio SwCode Dolby Digital, but you will still be able to export
  Audio Dolby. (Ref # 55279 and Adobe Ref # 2603943) ».

  Fortunately, I didn't need a surround sound, I'm not really thrilled to have to eliminate option however.  I still have a few other questions; I hope that I will get to the bottom of them as well.  Oh, I found MAJOR problems with the latest Nvidia drivers, causing a complete corruption of the video screens.  Roll back to version 280.26 solved these problems.

• 7 iPhone very slow camera capture

  Hello world. You already have the iphone Go 7 256 1 week. I find the camera focus speed is acceotable but a bit slower than 6 sec. However, what I find most disturbing is that after I pressed the shutter release button it takesa very long time to capture the image of which lack the coup my kidd or blurry images. I compared it side by side with the iphone6 more. Then 5s snd 5. The results are disturbing. Even my 5 captured images faster 4 years together with a speed more slow focusimg

  Did a reset using itunes on pc NDS installation again and also using recovery as suggested by cat from apple. Always the same. searched on youtube on speed tests and note 2 reports that canera 7 is laggy. Anyone with questions? Is it hardware or software? Please notify. BTW also on the latest ios 10.0.1

  Sounds like a problem with the hardware for me since it has been restored. I suggest you to take over an Apple Store for testing. I have a 7 128 GB and my camera is not giving me any questions.

• End of 2015 iMac is slow Lightroom / Capture 1pro 9

  Hello

  IM find in Capture one Pro and especially Adobe Lightroom (all the current versions) these programs are extremely slow preview and it is actually slower then my model 2012 end to work on.

  I'm running out of ram 24gig, 3.3 GHz Intel Core i5 and AMD Radeon R9 M395 2048 MB model of retina.

  FCPX is a lil months aswell

  Is it the El Capitan issue or something else?

  I bought this ill thought save time of editing a fly through my files, but need me more time!

  Someone at - it ideas?

  See you soon

  Scott

  Open Applications-> Utilities-> activity monitor.  Check the memory usage,

  CPU utilization, disk, and network activity and post your findings.

  Seems something is supported of the resources of your system for some reason any.

  El Capitan does not in itself and ask your question.

• That means 'samples to read' really means

  Hi all

  I use a capture of data PCI-6259 now card to read data from multiple channels. However, I don't really understand the "sample to read" node in "DAQmx read.vi.

  In my opinion, if I use the DAQ to sample multiple channels, this "sample to read" would be the number of samples per channel.  But I don't know if sampling is at the same time or not? If not, how do simultaneous samples for different channels? According to the user mannual, data acquisition must support a simultaneous sample of channels of the difference, or I was wrong?

  Kind regards

  Rui

  There are three parameters that control the time of an acquisition in DAQmx:

  Sampling frequency

  This control hurries samples are taken.  This is specified with respect to the samples per second.

  

  Samples per channel

  For a finite acquisition, it is the total number of samples that will purchase your program.  For a continuous acquisition, it is just used to help determine the size of the buffer.

  

  To read samples

  It is a setting on the DAQmx Read VI.  This allows to determine how many samples per channel is returned whenever VI Read is called.  The value '-1' returns all samples that are available.  If the specified number of samples are not available with the VI Read is called, reading VI hangs until the samples are available, or until the time which is connected to the terminal "timeout" runs.

  

  Thus, for example, if we have an application with the following parameters:

  Samples rate = 1000 s/s

  Samples per channel = 5000

  Samples to read = 100

  Then the application will gather 5000 total samples at a rate of 1000 samples per second.  The total acquisition will therefore 5 seconds.

  We will need to call playback VI 50 times, because whenever we call the VI, it is up to 100 samples available.

  Inter channel time-out is controlled by the property of the clock to convert frequency I.  The smallest value, for it can be programmed is the sampling rate overall maximum reverse for your motherboard.  The default rate is 10 to allow for extra time, unless your sampling frequency is greater than 100 kech. / s, in which case, we use the smallest possible value.

  So, for example, my PCI-6289 has a sampling rate overall maximum of 500 kech. / s (as indicated by the specifications).  My inter channel a minimum period is so opposite of 500 kHz, or 2 uS.

  You can set the clock frequency to convert HAVE using the DAQmx Timing property node:

  

  I hope that clarifies things!

• Is someone can you please tell me what the 'I' attribute file 'Content not indexed' really means? I found countless contradictory explanations for it.

  After doing a system restore, I have questions using being hidden files that should not be and is not being hidden files indexed. Nothing seems to work for unmasking files. The file properties dialog box doesn't help, so I'm looking (once again) to use the attrib-H command. Wondering if the - I would help me as well, but I can't find any MS doc that really explains the attrib. This means the file that IS NOT indexed or that the file cannot be indexed?

  Kind regards
  then missing XP

  Here is the documentation for Microsoft

  http://msdn.Microsoft.com/en-au/library/ee332330 (v = VS. 85) .aspx

• After 12.2 terribly slow effects

  I'm having a lot of trouble with after effects 12.2.

  Performance is excruciatingly slow. I can barely open the project now, I receive the message: ' opening... 100 percent complete "-sometimes it allows me to see the project at the end of 10 minutes or the project just stops responding." Save this project (which includes simple compositions, I use AE for motion tracking and calibration of color, not much else).

  Here are my system details:

  MacBook pro with Intel Core i7 2.7 GHz processor

  16GB 1600 MHZ DDR3 memory

  Graphics NVIDIA GeForce GT 650M 1024Mo

  I'm currently running OS X 10.8.5 and forced creative cloud AE.

  If you have any advice, I would be really grateful!

  See my response to your double post it here:

  http://forums.CreativeCOW.NET/thread/2/1045383#1045393

• MacBook Pro mid-2014 terribly slow

  My mac has been slow for the past 3 weeks at least.

  For example, the key of the train and take a long time to appear when I type them or resize a window accuses as well.

  1 month ago I diagnosed an activity monitor and found that a cloud of Photos.app synchronization process uses all the RAM. I killed him, and my mac was running super smooth again. But he returned to be slugish, and now I can't find what it is :/

  I did an Apple hardware test, found nothing.

  I created a second user account, it is trolling.

  I never installed MacKeeper (ugh!).

  I think it might be the GPU or RAM.

  Here is the log from the Console

  http://pastebin.com/5fUPrjrV

  And here's the Etrecheck

  http://pastebin.com/KKnd4mFj

  Clues?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The procedure is easy to do right, but it is also easy to do wrong, so I had very detailed instructions. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "GitHub") in Safari. Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

     Test started

    Part 1 of 4 done at: … sec  …  Part 4 of 4 done at: … sec

    The test results are on the Clipboard.

     Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Wi - Fi unexpectedly terribly slow

  Last month, when I started to get malware on my computer Windows 10, it does not. Then I started installing Windows on my iMac to get the best since my old PC running AMD and my unibody slim iMac runs OS X 10.11 and is a 1 TB hard. It is not my Mac Pro (which is super fast) and since then, I've lost 4 GB of RAM, and my PC is so laggy and terrible Wi - Fi. Can you help me please?

  Here is a great troubleshooting guide for problems of WiFi, courtesy of our own elcpu:

  Suggestions for Wi - Fi problems