After a distance of 10 feet of wifi router Broadcom in Dv6-6121tx does not work
I have a pavilion DV6-6121tx with a Wifi Broadcom 4313, which connects to a router Linksys G 2. It only works within 10 feet of the router and when moved to another room or behind a wall, it loses the connection. Tried everything but nothing works. Is anyone else facing similar problems with their card Broadcom?
Hello:
You have installed the latest Broadcom driver for your laptop? I have the 4313 in my dv6810us, and I must admit that its range is slightly worse than the card Atheros 5007, I replaced (because I wanted a N WLAN card).
However, mine is not as bad as you say. He gets 'a bar' less away from the router then did my Atheros card. I can go anywhere in my house and outside without any problem.
I can't send you the link for the latest driver because I don't know what OS you are running.
Did you open the bottom and make sure that all the antenna cables are firmly connected to the card? You never know.
If you are running Windows 7, this is the latest version of the driver:
Paul
Tags: Notebooks
Similar Questions
-
WiFi link for printer EPSON-750 does not work
WiFi link for printer EPSON-750 does not work. In spite of reset the WiFi on the printer and reset the EPSON 750 as default printer on the IMac, the connection between the iMac and the printer does not work
Have you also tried to restart the router?
-
After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?
This was the solution! The works of vpn as $ 1 million now. I followed the instructions above to enter the uninstall program and selecting the repair option. I rebooted the machine, then used the troubleshooting on vpn software compatibility option. Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.
Thanks, Nick!
Rick
-
I have a Pavilion dv6 laptop Notebook with Windows 7 64 bit Home Premium edition. After formatting the computer's hard drive, I reinstalled Windows 7 64 bit Home Premium edition.
Now it cannot connect to the internet through wireless. I tried all the basics: by pressing the button to turn on the WIFI on my keyboard, restarted my computer, which allows to disable the internet connection in the network area, etc..
In Device Manager I see 2 devices linked to the internet wireless:
1. other devices > Network Controller - it has a yellow warning sign then him - the error is to have no driver installed.
2 network adapters > Realtek PCIe FE Family Controller - "this device works properly."
Here is the hardware ID's for the network controller is not working: PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
PCI\VEN_10EC & DEV_8176 & CC_028000
PCI\VEN_10EC & DEV_8176 & CC_0280What should I do? How can I get my Wi - Fi to work again?
Thank you...
Hello:
Here is the link for the driver you need for your Realtek RTL8188CE 802.11b/g/n WiFi Adapter.
Paul
-
WiFi Driver HP Dv6-6c63sl does not work after frech windows install
Hello
After a frech Windows 7 64 bit install, I installed the Wi - Fi driver I found on the page drivers of my PC HP DV6-6c63sl:
But the 'red light' switch Wi - Fi is always on, I didn't encounter this problem before.
Could you please help or give me a driver for my WiFi card
Thank you in advance.
Hi Huntrz,
Thank you for visiting the Forums HP's Support and welcome. I have read your thread on your HP Pavilion dv6-6c63sl Notebook and not able to download WiFi. Here is a link to theHP Support Assistant. The HP Support Assistant will help you in the wireless and other items that were not installed properly with the new installation of Windows 7.
Hope this helps you.
Thank you.
-
Phone will now connect only via wifi to otherwise the web network does not work
My Motorola xprt is less than 1 week old. At first, that everything worked well. I got internet connection etc. So I connected to my wifi at home and it worked fine, then my wifi secure at work. but now I can't connect to the internet without wifi. There is no 3G signal activity. I tried to help out with a representatitve of Sprint and after trying to make an update to profile 3 times in vain, he recommended I take it into a store and maybe get a new phone. Prior to this, however I tried to solve the problems of the site via a USB connection with the drivers properly installed (I think) and he was not able to detect my camera. Don't I have some settings wrong? I'm going crazy because I like the phone but can not use wifi all the time.
In fact the question on the data connection helped because I went to my settings and the title of the data management 'enabled data' has not been verified, now everything is ok - I have my 3G back. It seems that the Sprint guy should have just over my settings rather than suggesting that I might need a new phone. Thanks again.
I have another question, but I'll start a separate discussion.
-
I have a hp430 laptop with Windows 7 64 bit ultimate. After having a kind of pilot/virus that froze my computer, even once, I reinstalled my laptop with windows 7 64-bit ultimate.
Now it cannot connect to the internet through wireless. I tried all the basics: by pressing the button to turn on the WIFI on my keyboard, restarted my computer, which allows to disable the internet connection in the network area, etc..
In Device Manager I see 4 devices linked to the internet wireless:
1 > 1 other devices > network controller
2 > pci device
3 > pci simple communication controller
4 > Sm bus controller
-all the features above then have a yellow warning sign-the error is to have no driver installed.
What should I do? How can I get my Wi - Fi to work again?
I found a solution
go through that link above just enter #ven in the name of the Salesperson box and #dev in the dev on search button vill box.click a list of devices .go through the device u pc download of the combination of this vill...
for #ven and #dev, we need to click on 'network controller', which need drivers in Device Manager.
Then click on the Details tab. In the property drop-down list, select the second element (Hardware ID).
We can get to the #ven and #dev of the first string you see in the window...
hope this helps others...
-
I have a HP Pavilion g7 - 1205ev laptop with Windows 7 64 bit Home Premium edition.
I bought a new hard drive, so I had to reinstall Windows.
After installation, the laptop cannot connect to internet by wifi or Ethernet. After trying the troubleshooting it says that windows do not detect a network card installed properly.
In the Device Manager, I see that there is an exclamation to these exact components:
Standard VGA graphics card
BCM20702AO
Ethernet controller
Network controller
PCI device
PCI Simple Communications controller
SM Bus controller
Download all these somewhere? And of course I'll upload them to another PC that my laptop will not at all online.
I also tried to run Ubuntu from a flash drive on my laptop and the Ubuntu uses the Internet very well. (If this information is useful at all)
Can someone tell me what to do? I'd appreciate any help. Thank you.
Hello:
Here are links to the drivers you need...
First, install the smbus controller driver and restart.
Then, install the graphics driver and restart.
Ethernet controller:
Network controller:
BCM20702AO:
Comms Simple PCI:
Dev PCI:
-
Please let me know what are my options.
Thank you!
Daniel
Hi Daniel,.
Please visit the following link to solve this problem: https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
However, I believe that Acrobat 7 is not compatible with windows 10.
Kind regards
Rahul -
Communication satellite U500 wifi switch control does not work
Hello
I have problem after update of the operating system from Vista 64 bit to win7 64-bit. The problem is in the wireless communication switch command before notebok. When I was with win vista, it works fine, post off - wifi off and post-wifi on (without restarting). But when I updated to win7 and install all the drivers of toshiba upgrade dvd, my wifi switch works as follows:
When I turn on notebook with wifi off button - its turned off all the time and the wifi does not work and fn + F8 (shortcut key for wifi) does not work too. I have to restart the PC with wifi switch in position-the wifi works fine and fn + F8 is able to turn on and turn off the wifi. But that put the material do not react to pass and - diode LED is always on (in case when I start the pc with position control on and in the case where is when off wifi LED is not clear and switching does not work).
I've updated wifi realtek drivers but still it does not work. IAM verry sorry for my English. I was looking into Toshiba diagnostic tool and there is no modem device, but yes, wifi is perhaps problem here?
Thank you very much for the reply. Tom
Hello
Different Satellite U500 (and other models) supports various wireless network cards, and that's why you'll find also different WLan card drivers.
Your U500 seems to be equipped with an Intel Wlan card and here you can also download the right Intel Wlan card driver for this card:
http://APS2.toshiba-tro.de/WLAN/Welcome them
-
image capture does not work with the epson scanner after macOS sierra upgraded
Image capture no longer works with epson scanner v800 after upgrade. I installed the new drivers from epson, and it still does not work. Just says: "waiting for scanner", but nothing ever happens.
Drivers Epson macOS 10.12.x specific https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=256062 & infoType = Do wnloads & platform = OSF_M_X12 do not work?
-
My apple pencil does not work after the 9.3.4 update.
My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.
< re-titled by host >
Greetings RechargeableJam,
Welcome to the communities of Apple Support!
I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.
First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:
Force a nearby application on your iPhone, iPad or iPod touch
Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.
Best regards.
-
Satellite S50T-B950 - touchpad does not work after update of Windows 10
Hello "Toshiba."
After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work
Please help me solve this company of Toshiba problem
The same theme has been already discussed and resolved in this thread:
https://Forum.Toshiba.EU/showthread.php?83885Then please follow the proceedings in the other thread to avoid misunderstandings
by the way: here is the link to pilot site Toshiba win 10:
http://win10upgrade.Toshiba.com/swup...SPX?region=TEG -
Satellite U920T - function keys does not work after update to Win 10
Hello, good morning / evening...
I use (U920T satellite) and recently updated my Windows 10 Tablet
but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!I tried to restore the system and update the driver software but nothing has worked...
I use these keyboard shortcuts all the time and now it's really hard without them!
What is the problem? What should I do?
The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
http://win10upgrade.Toshiba.com/swup...SPX?region=TEGMaybe you can try the drivers released for other models of portable Win 10 supported...
I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try... -
normal flash camera does not work after the update of Marshmallow to lenovo turned vibe
after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable
but when open video camera flash is working and also with any another application to camera is working normally
How can fix this?
reset the camera settings after Flash open ligt
Maybe you are looking for
-
My iPad will not normally charge. I tried different cables and Chargers.
-
Why Mozilla blocking presenting some ideas?
Feedback about Firefox is highly biased. The positive comments are welcome, but negatives are blocked. There is also a block against the shipment of certain types of ideas. I'm trying to submit an idea on the display of the text in the address bar, a
-
Camera gives a black shadow & drivers Win7 for Satellite A350-13 has
Hellowould you help me with my problems? 1 - my camera sometimes after the launch of gives a shadow black and after a while, it works normally, but generally it works correctly. 2 - my os is vista and I want to replace it with Windows 7. So, I have n
-
capture audio from an old tape recorder.
Dear Sir. I wear it in front of you I have connected an old tape recorder with me to my PC to capture audio from the recorder. I did not understand how to capture the audio later. Kindly advise me appropriately if possible through a video in order to
-
Cannot start Windows Task Manager printer spooler, Service.
When I try to start the spooler printer of Windows Task manager, it gives me an error message - operation failed. I need to get this started to launch my new brother FAX/printer. Help, please. Thank you. JoB