After cancellation of Vista all the files locked by TrueSuite
A while back, I drove back into Windows Vista to an earlier date and thus all my files locked by TrueSuite became corrupted and I can't open them, move, delete, etc.
I tried to remove it from the command prompt, but that no longer works.
Is there a way I can remove it?
Thanks for any help.
Hello
Have you tried to delete these files once the TrueSuite has been uninstalled?
I think that it s worth a try.
Remove the TrueSuite of the system, reboot the laptop, clean the BONES and the registry using the CCleaner and reboot the laptop again.
Then check if the locked files can be deleted again.
Greetings
Tags: Toshiba
Similar Questions
-
"Backup canceled because all the files were ignored"
Hello
I'm performing backup of database by using the following command:
Run {}
allocate channel c1 device type disk;
database backup incremental level 0 more entered archivelog delete;
output channel c1;
Validate restore them database;
}
While they inspected the RMAN newspapers, it ends, and I can say that it is a good backup. I can also list the components of backup that has been backed up. After this step, I want the flash_recovery_area on a backup tape, I used this command:
Run {}
allocate channel t1 device type sbt;
BACKUP RECOVERY AREA;
REMOVE the TYPE of DEVICE OBSOLETE sbt;
output channel t1;
}
When I do that, I get this message from the newspapers, and I see not all tape backup:
-NEWSPAPERS-
allocated channel: t1
channel t1: SID = 503 device type = SBT
channel t1: Oracle Secure Backup
From 23 July 11 backup
Specification does not match any newspaper archived in the recovery catalog
Specification does not match any data file copy in the repository
Specification does not match any backupset in the repository
backup cancelled because all the files were ignored
Backup finished July 23, 11
RMAN retention policy apply to the order
RMAN retention policy is set to 7 days recovery window
not found obsolete backups
output channel: t1
RMAN >
I don't understand why I get this message when in fact, I archivelog and datafile backupset saved in my FRA. Any ideas?
Thank you!CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK to 'C:\oracle\flash_recovery_area\PROD\AUTOBACKUP\%d-%F ';
CONFIGURE CHANNEL DEVICE TYPE DISK MAXPIECESIZE 2 G FORMAT 'C:\oracle\flash_recovery_area\PROD\BACKUPSET\%d-%T-%U ';When you specify a FORMAT, Oracle takes this format as the backup location. It may happen to be physically identical to your FRA, but it is not logically the same as your FRA.
A BACKUP RECOVERY AREA is not 'find' these backups because they are not logically in the FRA.You will also find that Oracle automatic management of the FRA (where it automatically removes OBSOLETE etc backups) will not work against these backuppieces - once again, because they are "not in the FRA.
A good backup RMAN that goes to the FRA relies on 'db_recovery_file_dest' (and "db_recovery_file_dest_size"). This is set up, a simple "BACKUP DATABASE" (or "BACKUP AS COMPRESS BACKUPSET DATABASE") will create BackupSets in the FRA. It will automatically create the appropriate folder structure (each day is a new folder). Controlfile AutoBackups, too, should use the FRA.
See the Oracle support Article: 'configuration correctly the box Flash recovery to allow the release of recoverable space [ID 316074.1] ".
Hemant K Collette
-
computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how to do it, in simple terms,
Thank you.
If by "computer of new beginning" you mean that you have started your recovery or disk restore factory set and reinstalled Windows, then the ability to recover your files is practically zero. You can try a utility like Recuva (http://www.piriform.com/recuva) but since you have rewritten the entire hard drive, it is highly unlikely that anything will be recoverable.
-
I have just re-installed Windows Vista and I can't find all the files he supposedly saved.
I recently reinstalled vista (yes I know I should have bought mac) in any case I can't find all the files I've supposedly saved. any ideas? Thank you
original title: Reinstall vistaHello
You don't say how you have reinstalled or how or where or by which program or process, you saved your data...
A relocation normally will wipe away the old operating system and all data during the resettlement process.
You can try this free program to see if it can recover your data:
http://www.Piriform.com/Recuva
See you soon.
-
I am currently using Windows vista. I face a problem that I can't remove all the files in the form of MPEG-4. And the error with code 0x800704C8. What should I do so that I can delete these files? Please kindly help me to solve this problem. Thank you.
original title: Code 0x800704C8...Hello
Did you change your computer?
Method 1:
Step 1:
I suggest you follow the link and check.
What are the permissions?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions
Step 2;
Why can't I delete a file or a folder?
http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder
Diagnose and repair Windows files and folders problems automatically
http://support.Microsoft.com/mats/windows_file_and_folder_diag/
Method 2:
I suggest to download and install the Microsoft safety scanner and run the scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate
-
Hi all,.
Today, I started my JDeveloper and was rather surprised that I can't edit any file in any project that I opened. All files have a small lock in the upper left corner.
Here is a screenshot of the indication.
I use git as my vcs. Git does not support file locks, but a svn. Maybe something gets mixed upward...
Anyway that it blocks all the files in the projects that do not use the vcs.
Thanks and greetings
Lukas Wagner
What is in the .jdeveloper folder?
I suppose that you have created a new record of system12.1.3.0.xx.xx.xxx in this way. It is save to assume that the problem was the system folder. Check out my blog https://tompeez.wordpress.com/2011/11/21/save-most-of-your-changes-to-the-jdeveloper-ide/ which give you some tips where the most change is stored. You may be able to recover the information in the record of the official languages.
Timo
-
My computer crashed and after the purchase of another, I used the Migration Wizard to copy all the files to the new computer. Everything was going well until I tried to launch LR6. It was two weeks ago and a search for many pages of the Adobe Web site. I think I've exhausted all the remedies listed without success codes error A12E5 to questions cloud creative, Manager of Application and error 1: Configuration problems. I'm ready to reformat my computer and try again with Time Machine. Help would be greatly appreciated before I waste more time on this task. Any further suggestions?
Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files
Sign out of your account... Uninstall... to run vacuuming...
-non-Cloud programs, to disable the service before uninstalling
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-using the vacuuming after uninstalling and before reinstalling is often necessary
-https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-Restart your computer... Sign in to your account... Reinstall
-
Hi friends, after upgrading to Windows 10 in my PC, my CC of Photoshop does not work. It is also not far. I want to uninstall Adobe CC and reinstall everything from scratch after you delete all the files. Please guide me. Thank you...
You can uninstall creative cloud, CC of Photoshop and other Adobe programs you want to remove "Programs and features" in the Panel
Execution of other http://download.macromedia.com/SupportTools/Cleaner/win/AdobeCreativeCloudCleanerTool.exe
Then reinstall Creative cloud link below
Download Adobe Creative cloud apps | Free trial of Adobe CC
Register and download the programs you need
-
When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
will have no sound. (but in the contact box everything its fine) Why is this?Why is this?
Because you forgot to patch source audio track.
-
I completely deleted Firefox and deleted all the files. After installing fresh Firefox, Firefox sees that it has been installed previously? "Looks like you have reinstalled Firefox. Want us to clean for a fresh experience and as new? »
I uninstalled Firefox (so-called) "completely" using the guide here: https://support.mozilla.org/en-US/kb/uninstall-firefox-from-your-computer
Why the new installation of Firefox recognizes that it has already been installed? Uninstall tool to uninstall Firefox COMPLETELY. As it is, can someone tell me what is the appropriate procedure for removal COMPLETE?
All right, thank you in any case obtained.
I removed all of these places:
-
-
C:\Program Files (x 86) \Mozilla Firefox C:\Users\Chris\AppData\Roaming\Mozilla\Firefox C:\Users\Chris\AppData\Local\Mozilla\Firefox -
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Mozilla Firefox.lnk -
HKEY_LOCAL_MACHINE\Software\Wow6432Node\Mozilla\Firefox HKEY_CURRENT_USER\Software\Wow6432Node\Mozilla\Firefox 50.0 Firefox HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\Mozilla (x 86 en - us) -
ApplicationIcon HideIconsCommand ShowIconsCommand ReinstallCommand Installation directory PathToExe PathToExe Components Plugins ApplicationIcon HideIconsCommand ShowIconsCommand ReinstallCommand Mozilla, please take note and to integrate them in your current "uninstaller" tool. Thank you.
-
I want to change the view and see all the files. Reason is to move files from one hard disk to another instead of doing the method of file transfer.
Go to start / Control Panel / folder Options / view and scroll down and check the box to show the hidden files and folders. In addition, uncheck to hide system files. In addition, uncheck to hide extensions of known file types (the last because it can be useful and worth while you're brings other changes). Your problem should be solved.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I'm unable to save all the files on my pc which runs with Vista Ultimate operating system
I'm unable to save all the files in any application. The dialog box type of flickers in the background, but nothing happens.
Happens if I am recording a chart on the web using a web browser. Happens when I create a file in Excel or Word, Paint, and Serif (possibly other applications which I am not using at the moment) and then click on "Save as."It happens if I opened a pdf file from any source (be it on my drive hard or on the web) and click on "Save as" to save another copy.
It happens when I'm using a web-based e-mail service, and if I want to add an attachment, as soon as I click on the Upload button, nothing happens.
It happens when I try to export a scanned image of my scanner, to a file.
I get no error with the exception of this shimmering when one would expect to see a dialog box.
But, it happens when I create a new file in Notepad, which is a weird exception
It started to arrive 3 days ago, and I have not loaded any new software changed the settings I can think. (with the exception of mcAfee who has downloaded an update almost everyday)
I restarted my computer several times since and searched the net to find answers, but it seems I'm the only one afflicted.
I would appreciate if someone can shed some light on this.
Thank you
I ran scandisk and check sfc, but that did not help. Instead of trying a system restore, I tried the opposite: installed at every possible update available.
Result: Problem solved!I installed 14 updates:
KB974306
KB976325
KB905866
KB943729
KB960362
KB969058
KB971512
KB971514
KB972036
KB975364
KB976470
KB933713
KB971513
and Windows Internet Explorer 8 -
I can't open literally all the files .exe on my computer
I don't know what's wrong, but the .exe file only I can open is my mozilla firefox, something fails.
It all started when my AVG found a malware and I put on quarantine, the next thing I know, not to run all my .exe files.
so I thought that I just restarted my computer and I did. always without success.
I ran the restore of the system, but no, it did not work because it is a .exe file...
has ran that AVG did not work.
has run all the files and nope nothing works, he always asks to choose from a list, and the only option I have chosen is "Windows Home Media.
and I was so mad as to what really happened.Fortunately, firefox is still working so now I'm here asking for help on my situation.
I don't want to use my recovery disc since I got precious files on my hard drive, I don't want to lose. and I can not burn any disk since already well you know, all the .exe which my burning program, went nuts and don't obey me.
I hope that someone help me ASAP:(je vous saurais donc.)
Thank you in advance!
Restore the .exe Windows Vista file association, after badly with another application
http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html---------------------------------------
If necessary after the foregoing:
Define your main program associations, and then you can edit any type of file to the correct program.
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.htmlHow to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html
How to view and change an Extension of filename on Vista
http://www.Vistax64.com/tutorials/103171-file-name-extension.htmlHow Unassociate a Type of Extension file in Vista and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.htmlRestore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
When I do a search in all the files, for example "kick" after closing en reopen the browser to search mij disappeared. This behavior is normal?
Yes - unfortunately, others have commented on this behavior and what you can do is to submit the application to apple for an improvement.
It is the behavior designed for now... need to re - kick it...
-
My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?
In fact, it can be easier...
If you have the old drive connected as, say, drive E, go to:
E:\Users\username
Then click in the address bar and paste it after this and press ENTER to open it:
\AppData\Roaming\Mozilla\Firefox\Profiles
Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.
If you find multiple profile folders, look inside to find the most recently updated backups.
To restore the backup files, see: restore bookmarks from a backup or move them to another computer
Maybe you are looking for
-
Where Thunderbird stores emails and attachments?
Eudora is suffering from problems of certificate expired - but I know where to find all e-mail attachments and emails so that I can save them. I installed Mozilla Thunderbird, but I can't find the files that look like attachments or e-mail records al
-
which adapter for MBP 2009 (MD565LL/A)
I just got back my 2009 mbp which I use primarily as a backup machine or to run a CD rom, now that I have a more recent tune. Unfortunately the person that I lent lost the power cord. It seems that I need an adapter model T in FORM 60 W magsafe power
-
We have an office p7 - 1370t with the mouse wireless keyboard and #mg0982 mod #kg1061, the left button getting more tempermental so want to replace, I can use the original usb receiver and just buy a mouse or what I need to replace the keyboard and u
-
Question of Bootcamp, even after the restoration process...
Hello I still have this problem Bootcamp launch even after trying restore OS X via Internet and Time Machine Please can someone help me rebuild my disk of any merger manually? Here is my list under terminal diskutil: / dev/disk0 (internal, physical):
-
Convert .wpt .doc
Original title: convert .wpt I need to convert brother .wpt doc