After clearing a jam on HP5520, the printer is offline, not coming back

Similar Questions

• ScanJet 4890 light bar trips at the end of the scanning glass and not coming back in the beginning

  My ScanJet 4890 sometimes does not work properly.  In preview mode, the light bar will sometimes travel to the end of the scanner with light on and not go back.  The engine receives a sharp wail.  I have to turn the scanner and then turn the GET the light bar to return to the starting position.  Sometimes, it works correctly.    How can I fix my scanner?

  I found an unusual solution to my own problem.  I drilled a hole of the housing of the scanner.  Then when the light bar gets stuck, I push a pencil into the hold and kick the light bar.  The bar is moving on its own and returns to its storage position. So, I can continue without turning the scanner on/off.  I suspect that the engine needs to be replaced, I can do later if I can find one that suits.

• The printer door does not shut down after printing

  HP Envy110 model D411c.    I printed out a page, the door opened, the extension arm is released, but was partially blocked. The printed page in the status bar and was recovered, the extension arm retracted, but the printer door has not closed completely.  I printed the pages since then, everything works well except for the door.  It closed partially and stops.  No warning appears on the screen.  I have to close to allow the doors close. Help!

  OK, I have a solution thanks to the autonomy and the helpline UK. At least, it works for my desire 120th All In One.

  The door / cover will always return to the position where the task was started. I don't remember to start work with the Panel in the raised position, but apparently I did.

  Solution: With the printer, gently push the door closed. Now print or copy. As the work that started with the door closed, he will return to this position even when the work is completed.

  Why oh why is anybody's guess. Good luck!

• 5610 cannot clear the print queue, will not print

  Windows 7

  Works very well, then work has been "caught" in the queue. I can't print and I can't delete the job.

  Windows troubleshooting tool said he found a print job in the queue that prevents other print jobs and that fixed the problem, but it has not fixed the problem. If I run againî, I get the same message. Diagnosis seems correct, but just what he thinks he's doing to solve the problem does not work.

  I tried the printer doctor, but even if she sees the printer it does not move to fashion, we're going to fix things.

  Manually, I went to "Cancel all Documets" but that the command was not enabled even if the printer displays the items in its queue.

  I went on the ' record of spooling "in the System 32 directory and it was empty.

  Thanks for your reply. I had who tried once or twice before posting and it has not fixed the problem.

  What I didn't know (and did not appear in the online resources I checked) that the document was in the C:\Windows\System32\spool\PRINTERS directory on ANOTHER computer - hosting the network printer.  Once I found that crime files it I deleted the manually and solved the problem.

• doing just that, means "the printer is offline"?

  There must be an easy way and foolproof to get the printer started, but what is? Sometimes I managed, and sometimes I'm not. I try to unplug the power cord and the cord to connect my printer to my computer. I also delete jobs displayed in the status window. Usually, I repeat these steps several times. Then, when my printer feels like to leave, he will eventually start... usually.

  While trying to fix my printer, I sometimes see the words, "the printer is offline. I guess that's one of the reasons why my printer does not work, but what it means, and what I can do about it?

  I must add that this problem arises usually when a print job is interrupted due to a paper jam.  In addition, you must know that I have a Macintosh running OS 10.6.7 and I have a HP psc 1350 all-in-one printer-scanner-copier -.

  Sea on May 18, 8:53 AM PST

  Hey!

  Printer offline medium. It is not active now.

  There could be a number of reasons...

  Printer is not communicating with the computer.

  The printer is in "sleep".

  Lost wireless connection. etc...

  Just to be safe. Your printer is ready (power light solid) mode

  Then, select the printer icon and click on - sign to remove it. And click on + sign add it again.

  It will search for the printer icon, and then will show you a list.

  Just select your printer and click on Add.

  However, I would like to know what type of connection you use.

  USB, ethernet or wireless.

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• Wireless printing error: "the printer is offline" appears when I try to print.

  When I first you have the printer (Canon MX340) and set up I was able to print wirelessly, but I am now getting the message "printer is off-line" even if this isn't the case.  I got a new router installed after the failure of the original.  What I need to change anything on my notebook (parameters) as a result of changes in the router?

  Hi Ron_Rowen,

  1. is the printer connected to the network?

  2. do you have security software installed on the computer?

  See the link below and run them the fixit tool available, check if it helps.

  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

  http://support.Microsoft.com/kb/2027593

  If the tool fixit above fails, then refer below link and run the fixit tool, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

• Photosmart HP 7520 - message that the printer is offline or there is a problem

  Trying to set up a new printer HP Photosmart 7520 wireless.  The test print off shows that everything was fine.  I closed my firewall and tried other diagnostic tests.  Everything tells me my printer is fine, but when I try to print anything I got a message saying that the printer is offline or there is a communication problem with the printer.  Can anyone help with this?

  Moved from feedback

  Original title: impression of the printer

  Hi Lala,

  1 did you changes to the computer before the show?

  2. what operating system you have installed in the computer?

  See the steps from this link:
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02221706

  I suggest you also following article to solve printer problems in Windows Vista and Windows 7:

  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• KMS server stops working after 1 month? Have activated the clients now show not activated.

  KMS server stops working after 1 month? Have activated the clients now show not activated.

  Hi QuinnQ,

  The question you have posted is related to Windows Server and would be better suited to the TechNet community like TechNet is more oriented to professional support. I have included a link below for the TechNet Windows Server community who will support ask you...

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• at the start of the printer is offline and before you print anything,.

  want to start line printer, how do I?

  for some reason any (computer grimilins) at the start of the printer is offline and before to print anything, I have to go through the assets click Start-control-printer/fax-rt and click that the printer off line reviews and the thing will print.  and never to what I stopped and then all over again.  surly, there is a way to put these at the start, that it comes online, it's a hpmedia M7467c HP xp and printer is a HPoffficejet pro 8500.  This condition exists sense any solutions thank you, we installed the 8500

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://support.Microsoft.com/kb/308028

  It will be useful.

• "Unable to connect to the printer operation was not successful"

  I use the operating system Win Xp I have the WiFi network and I can't connect to any shared printer on my computer. She has a massage error like
  "Unable to connect to the printer operation was not successful"
  Can you please help me solve this problem

  Thank you
  Ramil

  Hi RamilAnuja,

  ·         This is the first time that you connect a wireless printer?

  Method 1: See if you follow the steps as suggested here.

  Microsoft Windows XP - to connect to a printer on a network

  Method 2: Check to see if this article helps you.

  How to set up a wireless network (WLAN) in your home

  See also:

  Microsoft Windows XP - overview of network configurations

  Printer in Windows problems

• Removed from Garmin using MSconfig and now I can't print. The print spooler is not running

  I wanted to speed up my computer and remove an item off my msconfig.  Now I can't print. missing spooler.  What should I do?  I tried dating back to some time earlier, but all previous changes are missing

  Operation could not be performed.  The print spooler is not running

  the question I wanted to delete was for Garmin

  don101947

  Hello

  I don't know if you have already solved the problem of the other answer, but here's something you can try if your not confident using the command line.

  Go to [start],-> [Control Panel]-> [administrative tools]-> [Services]

  Depending on if your running XP, Vista or 7 you can have 2 tabs at the bottom of the window you see.

  Select [Standard] if its not already selected. If you already have a large list, skip this step.

  Scroll down and find the print spooler. Double click it, and then set the "Startup type" to [Auto]

  then click [OK] and then make a right click again print spooler and select [start]

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Hi my hp c309 photosmart will not print any document message that the printer is offline

  Hi my hp photosmart c309 doesn't work when I print a document a message come and tell the printer is offline but the work of fine print.

  Thant for your help

  Angie

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps from the link below and check if it helps.

  Method 1: Try to follow the steps below and check if it helps:

  a. open the start menu, click Control Panel, and click on the "printers and faxes". This will open a window with a list of the printers currently installed on your computer.
  b. double-click the icon of the printer that you want to change online. It will open a pop-up window describing all current print jobs.
  c. go to "Printer" in the menu bar of the pop-up window and uncheck "Use printer offline." This action will change the printer from offline to online mode.

  Method 2: Try to run the fix it from the link below.

   http://support.Microsoft.com/kb/2027593

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: Also, try the steps from the link below. http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=3984415&prodTypeId=18972

  Hope this information is useful.

• "Failed to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer

  I have Lexmark X 5410 printer with the installation CD. Installed perfectly on computer with Windows Vista 32 bit. Try to install on Vista 64 bit computer but get error message "unable to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer that blocks NT 4.0 drivers (1930). Tried using the compatibility in the computer. Without success. How can I fix?

  Original title:

  32-bit and 64-bit Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  Excerpt:
  Can I run a 32-bit program on a 64-bit computer?

  Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  .
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.