After doing a failover and failback - store of data replicated

Similar Questions

• failover and failback on the physics of the standby database.

  Hi all
  
  I use the EE 10.2.0.4.I oracle version have a configuration database and named prim and Everelief. I tried the method of failover. I liquidated low primary eve and convert to the new primary database.
  
  
  •Arretez repeat applies.
  Run the following SQL statement on the database waiting for target:
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
  Standing by applying all the data received to redo.
  In this we give indication to the standby database primary database is no more.
  
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH;
  Once the order of FINISH is completed, the mode of protection of the primary database is lowered to optimum performance, regardless of its original protection mode. This is done because the new primary can be activated with on a standby
  SQL > select protection_mode, protection_level from database v$
  Level of Protection for the protection Mode
  ——————– ——————–
  PERFORMANCE WITHOUT PROTECTION
  
  •Check that the standby database target is ready to become a primary database.
  
  Query column SWITCHOVER_STATUS of the view V$ DATABASE on the database waiting for target.
  •If the physical database ensures the main role.
  SQL > ALTER DATABASE COMMIT to THE MOVE to THE PRIMARY WITH the STOP of the SESSION;
  •Open the new primary database
  SQL > ALTER DATABASE OPEN;
  •At this point the level of protection is passed to Max Performance "Unprotected".
  Circuits the new primary database.
  
  
  
  How can I see this previous situation?

  Hello;

  I can share my test notes (Oracle 11) should work even in 10:

  http://www.Visi.com/~mseberg/Data_Guard_Failover_Test_using_SQL.PDF

  Best regards

  mseberg

• Migration of virtual machines from a data store, and then delete the data store?

  Hello

  I have a future deployment this month and my Director wants to build a new RAID 6 array, create a store of data with the new table and then move all the VMS to the newly created data store.

  Then he asked me to take the old data store and remove it and the available space between the deleted data store and other stores of data in our shared environment. The question is when the new raid is created and vm has migrated to the new data store, which is the best way to remove the data store empty and make sure that the space available for other data stores? Any help would be appreciated...

  Greg ~.

  If all controls are met, you can go ahead and take it apart without any problem.

  I have re-iterate below checks:

  -No virtual machine is in the data store

  -The data store is not part of the cluster data store

  -The data store is not managed by the DRS storage

  -IGCS is disabled for this data store

  -The data store is not used for vSphere HA heartbeat.

  Especially highlighted 2 controls. Please note that SIOC can be enabled on the data without SDR photo store

• After 24 hours my second episode of my Podcast still does not appear in the store even if it shows to subscribers. Should I be worried?

  Hello!

  I recently published my podcast and my podcast and first episode both published to the store without any problem.  However, I posted my second podcast to my RSS feed yesterday and although he shows to my subscribers, it has not yet posted to the store after 24 hours. I updated my feed with Itunes and validation to check for errors, and everything seems to go well on my end.  Should I be concerned about or will I be impatient?

  Thank you!

  When you add a new episode to your stream and download it, it immediately appears for subscribers because their iTunes application reads the stream directly and the store is not involved.

  However, due to the multiplicity of the podcasts in the store (in thousands) the store caches the flow and it checks updates periodically. For this reason, there are usually 1-2 days for new episodes to appear in the store: sometimes it can be lower, and sometimes the whole process seems stuck and it may take several days.

  24 hours is a bit early to be worrying - it will be available for subscribers, it must appear in the store to another day or two. If it doesn't, go to Podcasts Connect, log in, choose your podcast and click 'Refresh Feed'. Give it time - the store can take a day or two to update. If that does not work, contact support and ask for a re-indexing: who can solve it. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• iTunes and app store menu missing from missing settings after put 9.3 updated ios (iphone 6)

  Today, that I update my iPhone to iOS 9.3 6. I noticed that itunes and App Store menu missing from missing settings after (usually presents below iCloud)

  Is anyone else having same issue?

  Check the settings > general > Restrictions > less help to ensure that iTunes store and install apps are on. -AJ

• Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.

  Bought a second hand iphone 5 and my seller did not remove device to find my iphone and im too poor to buy a fresh iphone and my country does not have a retail store, so how do I get it removed icloud? Its imei is *.

  Nobody here can help, and Apple will not help you to overcome the blocking of activation.  If the seller does not cooperate and remove the unit from their iCloud account, then you will never be able to use this device yourself.

  See disable find my iPhone Activation Lock - Apple Support

• Why have I not to close a file refnum after doing a file before a file of reading and writing

  Looking at the example of read-write text file I noticed on the Refnum case after making the text file write she closes the refnum and to read the text file opens again. Why must you close and reopen?

  Why can´t you use open file with the option create/open with read/write access, write to the file and then read it (and close the reference only after doing the reading? I try to do it but I Don t get all the data when I read from the file...

  OK, I assume you mean case #1 in the example I have just mentioned.

  If you do not close the file, you need to set the file position at the beginning before reading, otherwise it will read from the current position in the queue, which is after the stuff that you just wrote.

  (Re-opening and closing will be reset to zero position of ot, of course.)

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have a samsung galaxy s2 sprint phone and I just did an update for my phone. After doing so, I am unable to get my phone to register with my computer to get my music files off of it?

  I have a samsung galaxy s2 sprint phone and I just did an update for my phone. After doing so, I am unable to get my phone to register with my computer to get my music files off of it? How can I fix this problem? It worked absolutely fine before the update.

  Contact your cellular provider or Samsung with this problem.

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• After that I put my password, it indicates that my personal profile does not load and it gives me a temp

  original title: Login - personal profile

  After that I put my password, it says that my personal profile does not load and it gives me a temp.  He told me to go in the event log or contact administrator

  Your computer has recently made an update? There are now three consecutive profile simillar problems in this forum. I checked my update and there are 13 important updates, I invited I have to wait. I hope that someone could come up with the cause. The problem is serious, which can lead to loss of your files.

  Vista - user - logged on with a temporary profile profile error

  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  I hope I could help

• Upgrades - during the procedure, my PC says it is install updates - but after doing what he wonyt restart and I need to go to restart from the last successful to get windows to restart - ideas?

  Upgrades - during the procedure, my PC says it is install updates - but after having done this, she does not restart and I need to go to restart from the last successful to get windows to restart - ideas?

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick