After dual boot Windows 7 and Windows 8, get error 0xC004E003 and Windows are not authentic

Similar Questions

• Wat (windows activation technologies)... I have windows 7 rtm... when I install this update, my windows are not authentic... why?

  Wat (windows activation technologies)... I have windows 7 rtm... when I install this update, my windows are not authentic... why?

  Here is a possible explanation:

  Windows 7 displays "Windows is not genuine" with the code 0x80070005 error
  http://support.Microsoft.com/kb/2008385 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Re: Tecra S11 - Dual boot Windows 7 and XP

  I installed Windows 7 (from the hidden to the hardrive recovery section) on my new Tecra S11. I would like to know if I can use the Windows XP
  recovery media provided by Toshiba to create a dual boot Windows 7/Windows XP rather than go back to XP?

  Hi dualboot.

  As far as I know it of not possible to create a dual boot with XP and Windows 7 Toshiba Recovery disk. The problem is that the recovery disk erases the entire HARD disk, so there is no option to create a dual boot with another operating system.

  If you want XP too you need to a normal XP installation disk Microsoft or you use virtualization of Windows 7 XP mode, if some n t applications run on Windows 7. ;)

• How much better the partition of the HARD drive for dual boot: Windows 8 and Linux

  Hello

  I am a newbie in Windows 8, linux, Partition...

  I want to use my new laptop with windows 8 pre-installed on the following:

  Create a Dual Boot Windows 8 / Ubuntu
  Create on my drive C (single disk on my laptop):

  * a partition for the system
  * one for Windows 8
  * one for data and
  least for Ubuntu OS

  My goal is:

  -to install VmWare on Windows 8 and run Splat Checkpoint with virtual machines to make the FCTC laboratories.

  to install GNS3 on Ubuntu for CCNP Labs but with GNS3 to access the files in the data partition

  I have a Toshiba Satellite with 750 GB and 8 GB of RAM.

  According to you, what is the best size for my scores?
  Is there a better way to partition my C drive on my goal?

  Best regards

  I don't know if this is the right section, sorry for that. Feel free to move this thread in the appropriate section *.

  I think the size of partitions depends of the you want to use and install other software.
  So if you have a lot of software which runs under the Windows System I recommend to choose a larger size to win 8 partition.

  However, given that you have a 750 GB HARD drive, you could take 200GB for Win 8, 100 GB to Linux and the rest of the HARD drive size, that you can use for data.

  By the way: I found Nice YouTube video how to create a dual boot using 8 Win and Linux http://www.youtube.com/watch?v=E_Yd2jK-7Jg

  Welcome them

• CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Tile: CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Hello everyone.  My computer is adjustable having the dual boot with Windows 7 Pro on disk 0 (320 GB SATA Seagate Barracuda 7200.11) and XP Pro disk 1 (40 GB SATA Samsung SP0411C). As the two systems are available at the start but most all the time Windows 7 Pro would use. The computer is Compaq 7100, WCL PP255US, 3.2 GHZ Intel Pentium 4, 3 GB of ram, Council ch h 0968, bios HP 78 1 v01.05 16/06/2004, chip Intel 915 G Express.  According to the website of Seagate Barracuda 320 GB with (quote), ' he not there no master/slave because every player relationship is considered to be a master in a relationship from point to point.» If two drives are connected to a Serial ATA host adapter, the host operating system considers that the two devices as if they were the two "masters" on two ports separated. Both drives behave as if they were device 0 (master) devices.  On the drive Samsung (SP0411C) I put a jumper for master, it is connected to the motherboard instead of disk 1. Used rider illustrated for Samsung SP0411N since I did not see the SP0411C listed. When selecting information for Samsung Seagate site sometimes showed data for their readers. This is perhaps due to the recent acquisition of Samsung or maybe my mistake.  Tried swapping around wiring of each drive but that didn't work of course. Looked at the settings in the BIOS but did not see a way to create the dual boot.  Please let me know if you need more information. If you know how this can be done or have some suggestions, please let me hear it. As always, thank you very much for your comments.

  Oscar

  Hello oscarmint, I checked the specifications of your system and it does not show the system supports two types of hard drives.

  The system supports only Serial ATA (Sata) synchronous Maximum 150 MB/s transfer rate

  You would need to make the jumper on the Seagate 320 GB Sata Drive pin, set at 150 MB/s.

  You are right that the Seagate would not Cable Select or slave settings and it would be the master and only on cable.

  If the 40 GB hard drive is a type of ATA (IDE), you'd better put as selection of cables (CS).

• windows upgrade xp to vista in dual boot windows xp home and windows 7 ultimate

  Hello, I was wondering if it was possible to upgrade from windows xp home edition to windows vista in dual boot windows xp home edition and windows 7 ultimate.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Here is some information on my computer
  Dell dimension 2400
  Intel celeron 2.40 ghz
  80 GB ide hard drive
  DVD player and cd player
  pre installed windows xp 36 GB 8 GB free
  Make a new partition for windows 7 34 gb free 18
  integrated graphics (60.5 MB)
  Thank you

  Yes you can.

• Dual boot windows 7 and windows 8

  I would like to know how I would do a dual boot Windows 7 Ultimate for Windows download e-8 for 32 bit?

  How dual boot Windows 7 and Windows 8
  http://www.PAGESTART.com/win8cpdb02171201.html

  The goal here is to create a Windows 7 and Windows 8 Dual Boot computer while protecting your investment in Windows 7 (if problems arise) or do you simply not not to continue to use Windows 8.

  J W Stuart: http://www.pagestart.com

• How can I partition my hard drive for dual boot Windows 7 and Windows XP?

  I installed Windows 7.  How do I get a partition or virtual hard disk the hardrive and then install a different OS, so that I can dual-boot between 7 and XP?

  I only know of the VHD, 7 has a "virtual machine" option or is a long process that requires a third-party software?

  Not longer than the partitioning of the HARD drive and install XP - actually quite a bit more fast I should think and gives you the ability to move from one OS to the other without having to reboot the machine. You don't need to have enough RAM but... If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Remove dual-boot windows partitions 8

  Hi, I have a Hp probook 4530 s with windows 7 64 bit and I want to dual-boot windows 8 but I have the authorized maximum of partitions and I bought the recovery disc for windows 7 so I don't no if I should remove the recovery partition or the tools of hp, hp is pretty much empty is only using 1 mb to 5 GB , but I've heard that there a few updates to the BIOS, so safely remove one of these parties (recovery, tools, or both) to dual-boot windows 8?

  

  What I do is get a 3 TB external hard drive, or a size larger than your 500 GB. Create a widnows system repair disc 7. Use Macrium reflect free, all partitions (snapshot of the disk) backup, delete the ones that aren't needed. Tools and recovery are not necessary (but you should keep a copy so that you can go back to where you are now). The first partition contains startup information so don't get ride of that one. But even if you did and only restored the great OS partition, you could always use the system repair disc, do a startup repair and replace the boot on this single partition files and you're on your way again (it's just an extra step).

  After you remove the 2 partitions have not yet enough space to install windows 8. Go to disk management in windows 7 and shrink the partition and create a new partition in the remaining space.

• Dual Boot windows Linux 8.1 on Pavilion 17-e157eo

  Will there be a completely safe way for a dual-boot Windows 8.1 and Linux on a Pavilion 17-e157eo?

  I searched the dualboot topics, but solutions do not seem to apply in this case.  Secure boot has been disabled. Quick start has been disabled. In this PC disk partitions are not dynamic but simple.

  Starting from a Live Linux DVD results in a blank screen even if the DVD player is clearly read something.  Is the problem due to the fact that this PC has the INTEL 4600 graphics chip and an AMD Radeon 8670 M?

  A better solution would be to use VMware or VirtualBox, set up a Linux guest operating system, the host system is of course Windows 8.1?

  No problem, glad I could help. If you could mark one of my posts with an acceptable Solution and congratulations if this information was useful, it would be much appreciated and it would be useful to other institutions. Thank you and have a great day!

  Mario

• Dual-boot windows 7 on Windows 8 Hp Pavilion Desktop

  Hello
  I need help Dual-boot Windows 7 on my desktop Windows 8. I know it's 'public' to format the hard drive and install windows 7 on windows 8; So I decided to dual-boot. I have found no guides on the internet about how to do this. My computer model: PC p7-1414. I already have a DVD of windows 7 to install Windows 7 with. If you can help me it would be greatly appreciated dual-boot.

  If there is something similar to the line "UEFI" (something like "hp DVD...) in the image below? If so, boot from this line item UEFI.

  

  Please send Bravo

• Dual Boot Windows?

  I have a dual boot Windows 7 and Windows 8. I was wondering if I could increase the size of the space of hard disk for Windows 8?

  There are 333 GB of space available for Windows 7 and 20.8 GB available for Windows 8.
  I would like to know if its possible to increase space for Windows 8?

  You must use a third-party tool such as Easeus Partition Master Home Edition - http://download.cnet.com/Easeus-Partition-Manager-Home-Edition/3000-2248_4-10863346.html

  This will allow you to resize the boot partition by dragging the button to allocate the extra space for Windows 7 or Windows 8.

  Attention, create a recovery for Windows 7 and Windows 8 disk before doing this:

  Windows 8:

  http://winsupersite.com/article/Windows8/Windows-8-tip-create-recovery-media-144098

  Windows 7:

  http://notebooks.com/2011/02/09/how-to-create-a-system-repair-disc-in-Windows-7/

• Can I dual-boot windows 7 with windows 8?

  Hello

  Currently I'm with Windows 8 enterprise edition and now I want to dual boot into windows 7 to be part of my software work. For example my TV tuner software.

  Don't forget that now I'm on windows 8. So, what I can dual boot Windows 7? If so, how?

  And, I can access all the drives and folders with two BONES? will I have to install the software in the two BONES? Can I access photos and videos of these two BONES?

  Hi Laxmi,

  Thanks for posting your query in Microsoft Community.

  I regret the inconvenience caused to you.

  I suggest you to check with our TechNet forum to improve assistance to the question.

  Click on, https://social.technet.microsoft.com/Forums/en-US/home

  If you have additional questions about Windows operating systems, please do not hesitate to contact us again. We will be happy to assist you accordingly.

  Thank you.

• I can convert pdf to word format adobe acrobat, DC but my version of word is not correct because after conversion, fonts and lines are not correct in the original pdf document.  I am currently using version 6.1 of windows 7 service pack 1 build 7601. Is -

  I can convert pdf to word format adobe acrobat, DC, but my version of word may not be correct because after conversion, fonts and lines are not correct in the original pdf document.  I'm currently using version 6.1 of windows 7 service pack 1 build 7601 Home Premium. Is it possible that I might have to upgrade my windows 7 in order to get good conversions of PDF files in word files?

  No, it won't be linked to your version of Windows. Probably, you wait too long. Conversion cannot be perfect except for the files very easy.

• Can't get running dual boot Linux (Fedora) and Win8.1 in UEFI Duo 11 & secure boot mode

  Hello people,

  last year, I bought a 11 (Intel i5, 1.8 MHz, 8 GB RAM, 128 GB SSD) Duo with Win8 (64-bit) installed in secure boot mode. December 2013 I updated the OS 8.1 with a new license and curled UEFI & secure mode active, a few days after I installed Fedora 20 64-bit.

  Installing linux running properly, but I don't get any what startup, or UEFI GRUB menu and only earn 8.1 starts automatically. I checked the EFI partition: all files are installed in the appropriate directories.

  Can someone help me get the dual boot running?

  Thanks in advance

  Michael Wachs

  Hello again,
  Mission accomplished, I have a dual boot win8/fedora20.

  Well, it was much more difficult than expected.

  First of all, thanks to this guy, it's a bit more clearly how noncompliant efi bios on vaio actually works:

  so, let's keep in mind that the start process seems to:
  Look in /EFI/Microsoft/Boot/bootmgfw.efi; If present, it starts.
  Search in all subdirectories of /EFI/ for grubx64.efi. If present, it starts.
  Start /EFI/Boot/bootx64.efi
  Displays an error such as "The OS not found" message.

  Now, that's how I managed to do so, please note that:

  • It's more a hack here-I-fixed-it rather than a clean solution, but it works
  • There is probably a more easy/better way to do
  • a step may be unnecessary (I will say that when I suspect, but I will definitely not return to test)
  • I'm Italian and my English is awkward

  (1) enter the bios settings, select the boot from cd/dvd and disable secure boot (this may be unnecessary and can be re-enabled at the end of the process, I don't really know at the moment)

  (2) use the Fedora dvd installation (NOT 'live' one since you will need the feature of 'rescue') (Finally, you can use a direct to start and then go up and chroot for installed partitions, but it is longer)

  (3) save the system installed, this should mean pressing enter three times and ending up in a shell

  (4) if all goes well, run:

  chroot /mnt/sysimage
  

  (5) go to/boot/efi/EFI and follow these steps

  mv Boot Boot.old
  mv fedora Boot
  cp Boot/grubx64.efi Boot/bootx64.efi
  mv Microsoft/Boot/fwbootmgr.efi Microsoft/Boot/bootmgfwFUBAR.efi
  

  Now, this way our graceful bios not compliant will not find Microsoft file and will head to Boot/boot64.efi (fedora one). Unfortunately, grub scripts does not detect windows, so we need to manually add Windows entry in grub conf.

  (6) take note of the UID of the EFI partition:

  grep /boot/efi /etc/fstab
  

  (Well Yes, there are safer ways)

  (7) edit /etc/grub.d/40_custom and add this:

  menuentry "Windows 8" {
  insmod part_gpt
  insmod fat
  insmod search_fs_uuid
  insmod chain
  search --fs-uuid --no-floppy --set=root A609-3B1E
  chainloader (${root})/efi/Microsoft/Boot/bootmgfwFUBAR.efi
  }
  

  (8) now we will (re) making our new config (in our new location):

  grub2-mkconfig -o /boot/efi/EFI/Boot/grub.cfg
  

  I fear that this step will be necessary whenever there is an update to the kernel

  9) restart with fingers crossed

  Oh, I currently have a working dual boot windows 8 / 20 on my vaio fedora.

  My biggest fear this time, it's some obscure windows update could restore the original Microsoft/Boot/fwbootmgr.efi. Finally, I could rename it again, still, it would be boring. We'll see.

  What a great way to spend a Saturday morning.