After Effects intermittently CPU usage spikes and stalls of

Similar Questions

• XP Media Center Edition became totally unstable in the last weeks 3 - to ehrec.exe CPU usage spikes and it stops responding.

  I use this Dell original XPS systems is Windows XP MCE 2002 for 5 years now. The machine is fully patched and all drivers are up to date.

  A symptom is that it will start a program at 7:00 pm registration and registration of the status bar icon always displays this name of program even if by 21:00, it should have recorded 3 other programs and began a 4 t at 21:00. When it does this the minute 30 original program will be more than 2 hours of broadcast recorded on the original channel tuner would not turn stations by the configuration of the scheduled recording.

  ehrec.exe go out randomly to a State where it uses all the CPU resources available without using more memory or to all disk reads or writes. This will normally make ehshell.exe become desensitized and seem to be hung up in taskman. Doing an endtask on ehrec make ehshell to resume working properly. kill ehrec but may end up trashing all current record. I tried the solutions suggested on other forums (C:\Documents and Settings\All Users\Application Data\Microsoft\eHome\EPG purge and empty the E:\Recorded TV\TempRec directory), they have not helped and basically just made me have to reconfigure the program guide. I record only out of local air HD broadcasting stations.

  ehrecvr.log started the recording of these errors:

  [2010-07-14 22:14:52.357] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005
  [2010-07-14 22:14:52.357] CDigitalRecorder::Initialize: Get_Init failed 0x80004005
  [2010-07-14 22:14:52.357] CDigitalRecorder (0): initialize: adding Services
  [2010-07-14 22:14:52.357] CDigitalRecorder (0): AddServices: No. GLID Plugin corresponds to this recorder, 0 x 0
  [2010-07-14 22:34:02.691] CRecorder (0): FireTuningChanged:
  [2010-07-14 22:34:02.722] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005
  [2010-07-14 22:34:03.753] CRecorder (0): FireTunerStateChanged: 0, 2
  [2010-07-14 22:34:03.753] CDigitalRecorder (0): StartServices: impossible to get for recorder, 0 x 80004002 GLID.
  [2010-07-14 22:34:03.753] CRecorder (0): RunProc: could not start Services, 0 x 80004002
  [2010-07-14 23:00:43.984] CDigitalRecorder::ChannelAvailable - Pat is getting old by Mrs. 1047 table
  [2010-07-14 23:00:43.984] CRecorder (0): FireChannelAvailable (FALSE): 0
  [2010-07-14 23:20:54.120] CDigitalRecorder::ChannelAvailable - Pat is getting old by Mrs. 1062 table
  [2010-07-14 23:20:54.120] CRecorder (0): FireChannelAvailable (FALSE): 0
  [2010-07-14 23:35:19.469] CRecorder (0): FireTuningChanged:
  [2010-07-14 23:35:19.500] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005
  [2010-07-14 23:41:14.231] CDigitalRecorder::ChannelAvailable - Pat is getting old by Mrs. 1672 table
  [2010-07-14 23:41:14.231] CRecorder (0): FireChannelAvailable (FALSE): 0
  [2010-07-15 00:03:04.276] CRecorder (0): FireTuningChanged:
  [2010-07-15 00:03:04.276] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005

  I tried to apply again the Rollup2 patch that was published several years with the hope that run a subsequent manual WindowsUpdate would repatch all but which did not help. The machine has currently a Hauppauge WinTV 418 BDA Tuner (single channel HD) tuner card is installed. The machine came with an Angel TvTuner (dual channel analog) tuner card. I use the HD map for more than a year.

  I really don't want to move this machine to Win7, what other options can I try to do to return MediaCenter work properly again?

  Thank you

  DF

  DF

  I tried all the suggestions above and nothing seemed to clear up the same problem for me. Then I found this proposal it was v4 framework recently developed as a Windows update that may have broken my Windows XP Media Center Edition 2005 on my HP box. http://thegreenbutton.com/forums/p/91307/471286.aspx#471286

  I tried to uninstall the v4 of network and my Media Center works perfectly again since. Not sure if this is the only solution for the others, but of course, it worked on mine.

• A few days ago, I received to date on first pro and AfterEffects.  After which I could not open either. After effects had an another update and I could open it.  But first pro is still not open.

  received error message - the application could not start properly (0xc000142. Click OK to close the application.

  Hi Kammeron,

  Sorry for the inconvenience!

  The update broke the AMD CPU feature. Premiere Pro team working on a fix and will come out a patch soon as After Effects.

  Thank you

  Regalo

• After effects CC don't launches and displays the following error "the common suite Extensibility Platform (CEP) could not be loaded." and I have to re - install? What caused that?

  Just tried to open After Effects and got the error above - all my other apps CC seem to well.  Could do without having to re - install and reading a few posts to say that a reinstall didn't work?

  Concerning

  Alan

  Solved by adobe support - I'm on windows and if you "run as Administrator" that solved the problem.  You can make that permanent by right-clicking on the shortcut, select "Properties", select the Properties tab and check "run this program as an administrator". I get a box now when I open AE saying: "do you want to allow this application to make changes to your PC" but can live with.

  Alan

• After Effects cs5 - need to Dodge and burn tool effects in an area of an image

  Hello
  
  Y at - it Tools in After Effects CS5 having the same effect as " "Dodge tool" and " " "Burn tool"I have Photoshop?
  I have 2 faces de fade de "layer . « 1 "to"2 " but there are a few dark regions of layer " layer 1 " I need to clarify, because is dark. » Is there a solution or tool for the work ?

  
  

  
  

  
  

  
  

  Compose the layer 2, 4 and 5, and then add an adjustment layer or use masks that I demonstrated.

• I get errors after effects CC 2015, Media Encoder, and also Cineware

  Hello

  I have problems with 2 things.  First of all, when I try to go to Adobe Media Encoder I get the following error:

  

  It works perfectly well first Pro CC.  If I open Media encode and import a legacy file that works fine as well.

  And when I try to create new cinema 4 D file:

  

  There is NO movie theater that installed 4 d I can see on my system - where it is and how to download?  I tried to use import Photoshop 3D, but apparently we cannot do that more with CC?

  System: Windows 7

  Thanks in advance

  Dave

  The update fixes after effects CC 2015 (13.5.1) and Adobe Media Encoder CC 2015 (9.0.1) update are available: http://adobe.ly/1Il5JYe

• Intermittently after the reboot, the option "Hide when minimized" in the Task Manager Win XP is too effective; the CPU usage icon does not appear in the notification area. Sometimes restart heals, sometimes not.

  The Options menu of the Windows Task Manager includes "hide when minimzed ', to display an icon in the area of notification, but not on the traskbar. I leave that option checked all the time to control the percentage of processor; but sometimes without apparent cause, after I reboot there is no icon in the area. Is there a way to fix this?

  Hello ronks,

  Thank you for visiting the Microsoft answers community.

  The reason for which the icon is not in the system tray is because the Task Manager is closed not minimized when you start your computer. To do this, you could do the following:

  -Go to my computer > C: > Windows > System32
  -Locate in Taskmgr
  -Create a shortcut > right click on the shortcut > click on cut
  -Navigate to my computer > C: > Documents and Settings > username (your username) > Start Menu > programs > startup
  -Paste in the startup folder

  -Right click on the shortcut > click Properties
  -Less run > pull down the menu and select Minimized > click OK > close window

  Now every time that you restart the Task Manager will be launched in a minimized state.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer is undergoing intermittent blockages - CPU usage spikes in the Task Manager but cannot say what makes spike. My internet connection closes, mouse freezes, the keyboard is blocked.

  I closed the unnecessary processes without result. I removed all non-essential programs to start. No virus.

  Once when this happened, I went to start > connect to > show all connections and the wireless, then activated and fixed network connection disabled and stopped freezing. When it happened again, I tried the same (x 2) and computer shuts down. When the error report is returned that it took me to a page that says problem with a driver. I reinstalled wireless (x 3). I know very little material. Can someone point me in the right direction?

  LaDonna3,
  You can take a look at this article which deals to restore the performance of your PC.  Also, you should make sure your system is up-to-date with the Windows updates and then check with the PC manufacturer for drivers that are updated for your system. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Im trying to download After effects, it fails each time and wrote a problem with the download server?

  Im trying to download the effects after trial, but each time it starts to download fails and told them something wrong with the download server?

  Hi d3signerg3y,

  What operating system are you using. You are on a managed network.

  Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html .

  Kind regards

  Romit Sinha

• memory leak Winlogon.exe and high CPU usage

  I use Windows XP SP3. I'm leaking memory in winlogon.exe (about 5 M/hour). In addition, the CPU usage spikes to 50% of all 6 seconds. The file is properly signed so probably not a virus.

  This problem started after the application of last weeks patches.

  I seriously doubt that winlogon has a memory leak or people around the world would be screaming about it... and they are not.

  If this is what a thing look like, then you have another problem - probably a malware infection, or what you are currently using antivirus/antimalware protection is afflicted.

  Looking at previous answers, I would say that McAfee is afflicted, and it is already a well know that McAfee is a memory and CPU hog and you may want to consider replacing with something of less intrusive as Microsoft Security Essentials (do you use McAfee?).

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  What do you see (exactly) that you don't think you should see, and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans by operating clean, restart and fix any problems.

• Hello! I try to install After Effects and PS extended, but I can not... I have a Mac. Please help me

  Hello! It is what appears after trying to install After Effects on my Mac

  Exit code: 6

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DF015, DW063... WARNING: DS012...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 4 (s), 5 warning (s)

  -Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (11)

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (12)

  -Payload: {02EFB598-92AB-4DCB-A417-FE0FCBCD2266} AdobeColorVideoProfilesAE CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (10)

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (11)

  -Payload: {4758849A-8C03-4F90-A024-3D4C7A035B5A} AdobeMotionPicture CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (26)

  -Payload: {4817D846-700B-474E-A31B-80892B3E92E3} Adobe After Effects CS6 11.0.0.0.

  ERROR: DF015: cannot delete the symlink "/ Applications/Adobe After Effects CS6/Adobe After Effects CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 1405).

  ERROR: DW063: ARKDeleteSymlinkCommand of command failed. SEQ (1405)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe After Effects CS6: due to a lack of Language Pack installation

  ERROR: DW050:-Adobe after effects CS6_AdobeAfterEffects11es_ESLanguagePack: installation failed

  And cela PS extended:

  Exit code: 6

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DF015, DW063... WARNING: DS012, DW016...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 4 (s), 10 warning (s)

  WARNING: DW016: NOTE: cannot set the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {C346BBCF-A687-4500-BB19-EE9C2D6FF284} payload Suite Shared Configuration CS6 3.0.0.0

  WARNING: DW016: NOTE: cannot set the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {C346BBCF-A687-4500-BB19-EE9C2D6FF284} payload Suite Shared Configuration CS6 3.0.0.0

  WARNING: DW016: NOTE: cannot set the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {C346BBCF-A687-4500-BB19-EE9C2D6FF284} payload Suite Shared Configuration CS6 3.0.0.0

  WARNING: DW016: NOTE: cannot set the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {C346BBCF-A687-4500-BB19-EE9C2D6FF284} payload Suite Shared Configuration CS6 3.0.0.0

  -Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (21)

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (22)

  -Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (11)

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (12)

  -Payload: {48623899-C152-457D-9B30-1F957332AC2F} AdobeColorPhotoshop CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (3)

  -Payload: {78E38D75-4D92-4F6E-B631-17A436BED680} AdobeColorVideoProfilesCS CS6 4.0.0.0 -.

  WARNING: DS012: LocalizeFile: localized string not found for locale 'es_ES' try to get for en_US Seq (5)

  -Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0.

  ERROR: DF015: cannot delete the symlink "/ Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Frameworks/amtlib.framework/Resources"Seq (524).

  ERROR: DW063: ARKDeleteSymlinkCommand of command failed. (524 Seq)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe Photoshop CS6 Core: due to a lack of Language Pack installation

  ERROR: DW050:-Adobe Photoshop CS6 Spanish language Pack_AdobePhotoshop13-es_ES: installation failed

  -------------------------------------------------------------------------------------

  Please, I beg you! Help me I need it quickly

  Hello

  Please see errors ' Exit Code: 6 "," Exit Code: 7 "|"» CS5.5 CC, CS6, and error 'Output 6' or ' exit 7 "|"» Install log | Read, write, file system errors. CS5, CS5.5

  Hope that helps!

  Kind regards

  Sheena

• Which is the latest version of After Effects and Premiere Pro. Can you tell me the exact Version number please

  Thank you!

  The current version for both is 2014.2

  Exact version numbers

  After Effects 13.2.049

  and

  First Pro 8.2.0

  But this info will probably outdated very soon...

  The best way to check if you have the most recent version is to open your application client creative cloud and see if there are updates available.

• CS6 Premiere Pro and Adobe After Effects Download

  Is Premiere Pro and After Effects, part of the Design and Web Premium download CS6? I can't find PP and AE in my downloads / programs after that I downloaded the Creative Suite 6 software. Where can I find them and how to install to use?

  Premiere Pro and After Effects are included in the Production Premium and Master Collection, creative cloud.

  http://www.Adobe.com/products/creativesuite/buying-guide.html

  Both require hardware operating system and 64-bit.

• What is the difference between After Effects and Premiere Pro?

  (note; Cross posted in other forums there)

  Okay, that's the substance of my question, now for clarification and the reasons behind it.

  Imagine for a moment that there is a person who has heard of all these amazing products and wants to work with them to possibly change careers. Now imagine that person is a noob and has only a little creativity, a pinch of imagination and absolutely no experience whatsoever in what anyone who resembles a professional graphic arts, media, career, etc. with the exception of a few dabbling autour with paintings in oil, watercolor, pastel, acrylic and sometimes charcoal.

  Unfortunately, or fortunately depending on your persepctive I work on computers, these basics are covered. So now you understand my absolute lack of knowledge.

  I was check and finally purchased Production Premium thinking I am able to express something in Flash. The problem I have is (other than an obsolete computer) what is the real difference between the two programs, I asked? It seems some overlap in their functions. Sort of a different route to accomplish the same thing. I read the text of presentation on the Web site and the two sound very similar to my ears without instruction (eyes? alert mixed simile).

  If someone could kindly explain the reasons for using either of the two products and what they can do differently to me I would be very happy. I bought CS5.5 Production Premium and currently have loaded on my laptop before installing Windows 64-bit on the desktop (both at 32 bits at the moment) so I currently have the trial on the laptop. I understand the difference between Illustrator and photoshop, but these two are confounding. I also understand the differences between After Effects/Premier Pro 32-bit and 64-bit seems to be the spiffy Mercury playback engine. (a quick thank you to Adobe for versions 32 bit CS4 for these programs for the luddites such as I have, including!).

  I'm waiting for your wisdom.

  Premiere Pro is a video editing solution.

  After Effects is a video compositing solution.

  http://en.Wikipedia.org/wiki/compositing

  http://en.Wikipedia.org/wiki/Video_editing

• I installed the full version of After Effects, but as MPEG2 and DVD MPEG2 codecs are always miss

  The title explains little. I installed Master Collection CS5.5 as a full version, but After Effects and Adobe Media Encoder are still missing to the protected content. I rebooted and updated and restarted again. I installed as a trial and then entered the serial number later, and I also tried to use the serial number during installation. It seems that no matter what combination I try, I can't get MPEG2 if poster in the list to export.

  I just spoke with one of the software engineers, and he said that this could be the problem:

  If an exporter plugin ever to load, then After Effects try to load it again. It is possible that MPEG-2 exporters could not load a moment and then marked in this way.

  I recommend quiting After Effects, remove this entire directory and then restart After Effects:

  /Users/ /Library/Preferences/Adobe/After effects/10.5

  (No, this directory is not deleted during the uninstallation, unless explicitly say you to remove preferences, so it may have been left in your previous attempts to uninstall and reinstall.)