After Expression

Similar Questions

• I can animate individual characters in a block of text using the Wiggle Expression?

  I'm new to after Express and just diving in expressions. I was trying to understand if there was a simple way to use the wiggle expression so that he would wiggle of the individual characters in a text block independently of each other.

  Certainly appreciate any help.

  Have you tried the earthquake selector? Alternatively, you could add a selector expressions and add and raise the expression as follows:

  seedRandom (textIndex, true);

  Wiggle (1,100)

  Dan

• How to change step.result.status

  Hello

  I know just how I can configure the result step to something else state that "passed" or "failed". I know that I've done it before, but now I can't get this to work.

  Simple sequence attached file to demonstrate what I'm trying. Report as text in my machine looks like this:

  Start the sequence: MainSequence
  (Text of C:\Temp\status change test.seq)

  Pass/fail test: skipped
  Pass/fail test: failed
  TEST
  Test digital limit: failure
  Measurement: 0
  Limits:
  Low:                   9
  High: 11
  Comparison type: FROZEN (> =)<>

  Complete the sequence: MainSequence

  No reference to what we are missing?

  BR

  Petri

  Petri,

  http://zone.NI.com/reference/en-XX/help/370052K-01/tsfundamentals/infotopics/step_execution/ contains a list of action a step performs when it is executed.

  As you can see, State Expression is evaluated after the Expression. Therefore, you can not use after Expression to set the Step.Result.Status property.

  The following two options, you can try to change the status of the step:

  Option 1:

  Create the custom step type and modify state Expression.

  Option 2:

  You can use the reminder of step motor after updating the result of step

  Option 3:

  Stage results will be added to the Locals.ResultList table. Therefore, after a stage performance, you can change the result container in the table if necessary.

  -Shashidhar

• order of events in a step?

  Hello

  Regarding the expressions pre, post, pre-sous- and post-sous-steps expressions, what is the order of execution and evaluation?

  Thank you

  Hi David,

  There

  The Expression

  Step first substep

  (Calling Code module)

  Step after step

  After Expression

  But see running Chapter 3 - performance stage 3-14

  Concerning

  Ray Farmer

• Phone call on Thursday, May 16.

  I got a problem maybe a virus that could cause serious damage to my P.C. The young man with an Asian accent says that his name is James Anderson(Phone Number 099991001) tried to lead me through a series of pages, and finally I wanted access to www.ammyy.com. I was asked to press a button and it would allow me to achieve a success of solving my problem. Seeing that I was a suspect he put me on his technician. After expressing reservations, he hung up quickly brutally saying words to the effect of MS was finished with me because I was thinking of getting a computer architect to help me solve problems with my PC. Comments on a course of action?

  Hi Hugh,.

  Cybercriminals often use the names of well-known companies, such as ours, in their scams. They think it will convince you to give them money or your personal information. While they usually use email to deceive you, they sometimes use the phone instead.

  Click on the link below and see if it helps.

  Fraudulent emails and credit scam advice cards | Microsoft Security

  Hope this information helps.

  Just reply to us if you encounter any concerns.

• Substitution string literal

  Hi all.
  
  I'm moving a datetime value in a link on the page, using substitution strings:
  
  #DD #/ #MM #/ # YYYY # #HH24 #: #MI #.
  
  He does not understand the ': ' literal. If I type #DD #/ #MM #/ # YYYY # #HH24 #. #MI #, it works. How can I use the ': ' literal in a substitution string?
  
  Thanks in advance.

  Hello

  Item values cannot include colons
  

  Spend for example value

  #DD#/#MM#/#YYYY# #HH24#;#MI#
  

  Then use after expression header process or calculation pl/sql type to format the value for example

  REPLACE(:Px_MY_ITEM,';',':');
  

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

  Published by: jarola on 24 Sep 2012 20:29

  Published by: jarola on 24 Sep 2012 20:30

• setting up time capsule and express wired after disconnection of the airport

  I have a 2 TB Time Capsule and three 3 wired express airport throughout my house.  I know that when I added first the cable express, that I had to call apple to change some settings.  Now I can't service because they are more than a year and after a recent quick breakdown (two or three) power is the airport expresses link is more and a bunch of my settings seem to have changed on the Time Capsule.  Any help would be greatly appreciated.  Thank you

  If you think there are setting changes, then it would be better to start over.

  • First of all, you want to make a 'factory' reset on all of your base stations. This will return them to their "out-of-the-box" configuration Once finished, leave them turned off.
  • Then, we put up the Time Capsule (TC). Since it has been reset, it will broadcast a Wi - Fi unsecured network with a network name of something like: Apple network NNNNNN.
  • Use AirPort Utility on your iPhone, Mac or PC to configure the TC as a stand-alone wireless router. In other words, configure it to provide a secure WiFi network.
  • Once the TC has been configured, verify that the clients on your network can access the Internet with it.
  • If he succeeds, proceed to the next step. If this is not the case, stop and post back with your results.
  • We will now configure all of your base stations for a roaming network.
  • Power-up one of the three stations based AirPort Express.
  • Once again, you will need to use AirPort Utility to continue. The utility must now find the Express, and if all goes well, it will offer to the Express allows to extend the TC using Ethernet. It's what you want and just go through the steps automated window 'Installation '. And then on actually.
  • Do the same for the other two express base stations.

• Yesterday my AirPort express (2nd generation) wanted to update to be r 7.6.7. After that the speed of the aircraft fell sharply. Everyone has experienced similar behavior? Tips to solve the problem are welcome.

  Yesterday my Airport Express wanted to updated, I did. (from 7.4.6 to 7.6.7).

  After that, he started to behave erratically with big drops in speed. Anyone have similar experiences? How can I fix this without having to buy a new one.

  Stop your Mac. Turn off your Airport Express and stop the modem from your ISP. Wait 10 minutes, then turn on the modem to ISP, and then the Airport Express base station. Power on your Mac. Re-evaluate your performance problems.

  Run thisor that in this preference order to assess your latency time, download and bandwidth. You may need to modify the server or the other.

  I have upgrade 7.6.7 on my 4th gen Airport Extreme and observed no performance degradation to before the update.

  Sometimes the ISP gets their DNS in a tangle and makes the network almost Catatonic until they have to fix things. Nothing to do in this case at the user level. Did you call your ISP and asked them to check their equipment on your premises?

• Old Airport Express lost after reset of the router, the connection cannot be seen/accessed

  the train:

  -Mid 2009 Macbook Pro, OS Yosemite airport 6.3.5 10.10.5, utility

  -Existing wifi network via a former Ubiquiti AC wifi or router which gets internet radio antenna on the roof of the local ISP.

  -old (1st gen.) A1084 Airport Express used only as a customer to listen to the music of the said Macbook.

  I am a musician who has been using my old AEX to listen to the music and the recording via Airplay and Airfoil for my Roland onstage for years without problem. I don't remember how I initially put in place, but I think it's as a customer only... IE, it broadcast as its own wireless network, or extend my network wifi etc, I just use it for listening to music.

  Well, a week earlier, a disgruntled rogue ex-my local ISP hacked their radio tower and all the customer routers turned into useless bricks (and also all our wifi network names changed to a name that begins with "mother" and ends by "-ers", but that's another story).

  Local ISP technicians have managed to get my router all re - set up and working, but I had to reconfigure my wireless devices (example: wifi printer) from scratch to be able to connect again.

  The tenacious hold on is this old Airport Express.

  I try to use the instructions found online to get connected again, but nothing does.

  Yes, I tried pressing the Reset button for 10 seconds, etc... He just goes at once orange flashing or sometimes solid orange light, and don't see the Airport utility. I tried to plug its ethernet port to the router's LAN port to see if the Airport utility, would see no change, Airport utility requires no base stations found. It has no Airport icon in my menu bar and no Airplay icon in any relevant application such as iTunes.

  Remember that in past I was able to reset/reconnect after network changes, it seems to me (I don't remember how). BTW, its location is located a few feet from the router, in order to hang it up through ethernet is easy if need be.

  Once again, I only want to not to listen to the music and the tracking records of my Macbook. Roland aren't in a convenient place for an electrician. As you can tell the age of my stuff, I'm a starving musician, don't want to have to buy something new.

  Help?

  Hello lisajoy,.

  Thank you for using communities of Apple Support. I see that you are having some connection problems with your AirPort Express Terminal. You did a great job trying to get this resolved on your own! I'm happy to help you.

  To solve problems, get connected Airport please try the steps in this link:

  AirPort Express: How to join an existing Wi - Fi network in client mode

  If you connect and are experiencing problems using AirPlay and iTunes heres some more information:

  Wi - Fi base stations: how to install and configure AirPort Express for AirPlay and iTunes

  Have a fantastic day!

• migration from Outlook Express loses everything after 'group '.

  Hello
  I migrated from Outlook Express to Thunderbird on XP, then moved the files to Windows 8.
  I had a 'group' in my OE address book. Nothing after that that group name (which began with an H) has been migrated to the new address book. In other words, I lost everything after H.

  I also have these contacts on Gmail. Y at - it an easy way recover of EO (I guess I could remove the Group and start over, but it's a long process and I'm afraid to lose the mail I already sent on tuberculosis), or y at - it an easy way to get from gmail?

  Thank you.

  S

  There are several solutions to your problem, which is the best for you which I do not pretend to know.

  There is the possibility of simply to copy the WAB to outlook express for Windows 7 and double click it to him bringing in the windows contacts folder. I have instructions here http://thunderbirdtweaks.blogspot.com.au/2013/12/windows-contacts.html that include the Windows Contacts folder in Thunderbird.

  Alternatively, you can install one of the Add-ons to gmail contact sync. I use https://addons.mozilla.org/en-US/thunderbird/addon/google-contacts

• Airport Express stops working after that put 7.7.7 upgraded to Time Capsule

  I was able to update my firmware for my Time Capsule airport, but now my two devices Airport Express, which gave me "an unexpected error has occurred", seem to be in 'brick' and I can not even time Capsule to recognize after a reset.  I even spent my firmware to see if that was the problem... nothing.  Please help

  At this point, is the time Capsule still loaded with an earlier version of the firmware or is it still in 7.7.7? Nevertheless, I would say that you do a ' default ' reset on each of the affected AirPort Express base stations to their "out-of-the-box" configurations

  Depending on your answer to the first question, we can proceed from there.

• Firefox takes more than a minute to open after clicking on a link of e-mail in Outlook Express.

  When I click on a link in Outlook Express, Firefox takes more than a minute to open the page. I have 2 other computers running the same operating system (XP) and the same versions of Firefox and Outlook Express that do not have this problem. Firefox is my default browser.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• My HP 6500 AirPrint printer does not print after re plug AirPort Express

  After finding my Airport Express 802.11n flashing yellow I unplugged and then plugged back.  Green light came.  Then nothing would print to my HP

  Printer officejet 6500 has.  I said that it is connected. I have installed and reinstalled the printer, run diagnostics, turned off the firewall and it will still not print fron ipad iphone or computer Dell with Windows 10

  I have

  After finding my Airport Express 802.11n flashing yellow I unplugged and then plugged back.  Green light came.  Then nothing would print to my HP

  How your HP Officejet printer is connected to the terminal of the AirPort Express base station... by Ethernet, USB, or wireless? If you run the HP utility on your PC from Win10, can we find the printer? The 6500 is NOT an AirPrint-compatible printer. You should not be able to print from an iOS to this printer device.

• Satellite A100-813 - Express media buttons no longer work after XP install

  Hello

  I have a laptop Satellite A100 - 813 (PSAA8E). After you have reinstalled the operating system (XP), it's on purpose media buttons do not work. I don't have a recovery CD express media when I bought it. When I checked in the Toshiba Web site, it is not available.

  Please give me a solution.
  Concerning
  Prasanth

  Hello

  For these special buttons, you must install the tools of Toshiba. Did you check that?

  On the Toshiba site I founded the document setup instructions for your laptop and XP. It is a list for recommended order of installation of drivers.
  This means that you will also install Toshiba common Modules, Hotkey Utility, enabling/disabling Touchpad utility, utilities, etc.

• Express Media Player stopped working after Windows recovery with partition

  Hi people

  I'm new to this forum. We hope to get some tips on your part I recently got a laptop A100. It comes with the Media of Express Player (EMP) installed. Given that my HARD drive is 160 GB, I need to make a few partition to protect my data should WinXP crashes and needed recovery. I used Toshiba Windows restore CD to restore windows to a 40 GB partition and set up the other as an extended partition. This is the final State of my laptop after that.
  C: 40GB (contains WinXP)
  D: ~ 108 GB (for my data)
  I can see an unknown partition of ~ 250 MB, which is for EMP. I turned off my PC and turn it on using the button of the EMP. It did not work! EMP does not start. Can you guys advise? Anyone tried the partition their HARD drive and for the EMP to work?

  Hello

  Usually, if you want to use the functions of player Media Express that the Mediaplayer Express Recovery CD should be performed before performing recovery of recovery, DVD-ROM.

  You know you can't run Express Media player after performing a recovery!

  But it seems that you have not formatted the disk around and packed only the extra partition. Eventually, you n t need to reinstall the drive Media Express.

  I studied a little more on the technical knowledge of Toshiba and found this:

  In rare cases, Windows XP starts instead of the Media Express Player
  http://support.toshiba-tro.de/KB0/TSB6B01N70015R01.htm