order of events in a step?

Similar Questions

• Question of the order of events and functions

  Hello

  Sorry for the stupid question, but I'm working on something big and I would hate a small rock to thow me off in the end.

  So here it is:

  I not know how to operate the functions-> if you have:

  function function1() {}

  function3();

  }

  function function2() {}

  }

  function function3() {}

  }

  function1();

  function2();

  First runs function1 and function2 and function3. Is simple baptisms the function1 + everything it has nested functions again from the top to the bottom, then function2 etc.

  OK, so now I have this situation:

  If you have an INTERNAL component that is in the MAIN component. If you addEventListener (FlexEvent.CREATION_COMPLETE, test) inside of the INSIDE (class of the function of construction in my case) and also add the same event listener once again inside but the MAIN ingredient such as:

  public void main_creationCompleteHandler(event:FlexEvent):void {}

  inner.addEventListener (FlexEvent.CREATION_COMPLETE, test);

  addElement (inner);

  }

  Then you will have 2 event for the same event listeners. First one written to the INNER component will run, and then it will run in the MAIN component.

  Now if I set many many functions in INNER creationCompleteHandler, will all 100% complete before the creationCompleteHandler to HAND work?

  As I tested it, it looks like each treatment must be 100% made to the INNER creationCompleteHandler before it passes to the creationCompleteHandler of HAND.

  Can someone confirm that flash/flex works like that? Thank you!

  FM_Flame wrote:

  Hi Alex, guys,.

  so, I would like to summarize the question and if we can just say Yes or I guided even what is Yes, then there is no confusion

  Here are 2 scenarios:

  1) 2 headphones are added to the same same thing e.g. CREATION_COMPLETE - one for the component and the other to the container.

  It works like this:

  un) pane-> creationCompleteHandler starts to perform its functions/activities

  b) containing-> creationCompleteHandler starts to perform its functions/activities

  The question here is: will a) be 100% full before before flash moves to b) or b) could happen sometimes some time one) is running?

  Note: Yes this means a) will be 100% complete bofore b) occurs.

  2) for the second scenario allows to take 2 different events INITIALIZE and the FlexEvent CREATION_COMPLETE and add the listener both in the component only this time, so we do not complicate things.

  It works like this:

  un) pane-> initializeHandler starts to perform its functions/activities

  b) pane-> creationCompleteHandler starts to perform its functions/activities

  The question here is the same: will a) be 100% full before before flash moves to b) or b) could happen sometimes some time one) is running?

  Note: Yes this means a) will be 100% complete bofore b) occurs.

  Thank you very much

  (1) flash is currently single-threaded, so a Manager will end before the end of another Manager for the event itself. The processing order is not guaranteed and since your handlers are listening for the event attached to the same object, that it is imprudent to write code that depends on the order in which these handlers are called. Adobe are working to multi-threading the flash plugin, in the future any order that may now exist differrent in the future and any treatment that depends on a single completion handler until the other is called can also fail in the future because a multi-threaded player could activate the two managers simultaneously.

  It's nice to have answers Yes/No, but only if you want to write poor code that can work, by accident, until something changes that you have no control over.

  Do not write code that depends on the order this event handler is called for the same event.

  (2) initialize occurs before the complete creation. The answer is Yes.

• Order of execution in one step

  I'm relatively new to TestStand, and I am trying to debug a problem with a file of sequence.

  I have a stage, which is a .NET adapter (not sure if it's perhaps relevant).

  In these properties in a loop has been activated, and a post term has also been defined.

  The term post will run at the end of each iteration of the loop or just once, after that the loop has repeated 5 times?

  Thanks in advance.

  Andy

  Look in the TestStand reference manual in Chapter 3 in respect of the execution of the step.  It should be pretty clear.

  Start > all programs > National Instruments > TestStand > Documentation > manuals > NI TestStand Reference Manual

• Best order of events after the recovery of the system to the factory settings?

  I have done so recently a system recovery to the factory settings on my laptop and I was wondering just what I need to do and in what order to ensure the security of my computer.  Also, what is the best way to get Windows updates?  Should I open check updates from Control Panel or let them come as I go about my business or y at - it another option I should know about.

  Thanks in advance.

  Hello

  You can tell Windows to check the updates of their installation at a faster pace. You could
  Download and install Service Packs manually however allow updates as
  usual will allow still more special updates to install.

  In telling Windows to check updates or don't expect that the automatic update are essentially
  equal. Rob - bicycle - Mark Twain said it is good.

• Trigger event handler problem

  Hello
  I am facing a problem in the event handler, I'm pre process handler.bellow event is the steps that I followed and did all the steps correctly, but the event handler is not triggered.
  
  the steps that I follow is
  (1) develop a java class in which I will put middle name if the user does not have a middle name in the form of IOM in the CREATE operation.
  
  import java.io.Serializable;
  import java.util.HashMap;
  
  import com.thortech.util.logging.Logger;
  Import oracle.iam.platform.context.ContextAware;
  Import oracle.iam.platform.kernel.spi.PreProcessHandler;
  Import oracle.iam.platform.kernel.vo.AbstractGenericOrchestration;
  Import oracle.iam.platform.kernel.vo.BulkEventResult;
  Import oracle.iam.platform.kernel.vo.BulkOrchestration;
  Import oracle.iam.platform.kernel.vo.EventResult;
  Import oracle.iam.platform.kernel.vo.Orchestration;
  
  * / public class NamePreProcessEventHandlers implements PreProcessHandler {*}
  
  private logger = Logger.getLogger Logger ("logger name Handel");
  
  private String methodName ="";
  public NamePreProcessEventHandlers()
  *{*
  debug ("invoking NamePreProcessEventHandlers");
  *}*
  *@Override*
  public cancel Boolean (long arg0, arg1 is long,
  * AbstractGenericOrchestration arg2) {*}
  * / / TODO self-generated stub method *.
  Returns false;
  *}*
  
  *@Override*
  public void offset (long arg0, arg1 is long,
  * AbstractGenericOrchestration arg2) {*}
  * / / TODO self-generated stub method *.
  
  *}*
  
  * / / Write your implementation.*
  * Public EventResult run (long processId, long eventId, orchestration of the Orchestration) {*}
  * / / TODO self-generated stub method *.
  
  
  this.methodName = "execute";
  * / / This method get the parameters of the request of IOM form *.
  HashMap parameters = orchestration.getParameters ();
  
  debug ("settings" + settings);
  String operation = orchestration.getOperation ();
  debug ("operation process pre" + operation);
  
  If (operation! = null & & operation.equalsIgnoreCase ("create"))
  *{*
  String firstName = getParamaterValue (settings, "First name")
  If (firstName! = null & &! firstName.trim () .isEmpty ())
  *{*
  If (! parameters.containsKey ("Middle Name"))
  *{*
  orchestration.addParameter ("Name", firstName.substring (0,1));
  *}*
  *}*
  
  *}*
  return new EventResult();
  *}*
  
  *@Override*
  * Public BulkEventResult run (long arg0, long arg1, arg2 BulkOrchestration) {*}
  * / / TODO self-generated stub method *.
  Returns a null value.
  *}*
  
  *@Override*
  * public Sub initialize (HashMap arg0) {*}
  * / / TODO self-generated stub method *.
  
  *}*
  
  */***
  The value of request parameters obtaining *.
  **/*
  private String getParamaterValue (parameters HashMap,
  * String key) {*}
  String value = (parameters.get (key) instanceof ContextAware)
  *? (String) ((ContextAware) parameters.get (key)) .getObjectValue () *.
  *: (String) parameters.get (key); *
  Returns the value;
  *}*
  
  private void debug (String message)
  *{*
  Logger.Debug (this.) GetClass(). "GetName() +": "+ methodName +": "+ message);
  *}*
  *}*
  
  (2) create a jar named NamePreProcessEventHandlers.jar file and paste it into the LIB directory.
  
  (3) develpo a config to custom handler file as follows
  
  * < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" > *.
  "< * class =" test.eventhandlers.NamePreProcessEventHandlers action-Manager' entity-type = 'User' operation = "CREATE" name = "NamePreProcessEventHandlers" Stadium = "preprocess" order = "FIRST" sync = "TRUE" / >. *
  * < / eventhandlers > *.
  
  (4) create a plugin.xml file
  
  * < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" > *.
  "< * class =" test.eventhandlers.NamePreProcessEventHandlers action-Manager' entity-type = 'User' operation = "CREATE" name = "NamePreProcessEventHandlers" Stadium = "preprocess" order = "FIRST" sync = "TRUE" / >. *
  * < / eventhandlers > *.
  (5) make an Eventhandler of the zip file in which I placed the plugin.xml and lNamePreProcessEventHandlers.jar
  (6) save the plugin file to the server of the IOM
  (7) import of the event custom in the MDS.
  (8) clear the cache and restart the server of the IOM.
  
  (9) then create user page in free service, but the event handler is not triggered.
  
  Please help as I am with IOM 11gr2.was I miss some steps or above process is sufficient.
  
  Thank you and regars
  $

  All looks good, but your plugin.xml is not correct.

  Go to the format below and try again.

  
  
  
  
  
  

• Calendar, more a change event

  Hi all, I tried to change more then another event, (events of garbage this year, import the desktop) but without success. With the help of Automator, it shows me the events in this new year, but there is no script to change events. Next step, I was looking on the net, impossible to find solutions. I want to put a new recall for my calendar, so that I don't miss the events of Garbage.

  El Capitan 10.11.2 sytem

  You can set a reminder using the reminders app OR you can add an event in the calendar app and activate an alert for this event.

• Custom step and the step execution.

  Hello

  I need the solution for access to a stage performance

  The order of execution of a step to start as below.  How can I insert a call custom execution position before step 3 and after step 18?

  Can I create a custom step allow me to insert a function like that call

  1--> Allocate result

  2--> synchronization batch Enter

  3--> check Run for Skip mode

  4--> assessment

  ....

  17--> the Post expression evaluate

  18--> evaluate Expression of State

  Tphan wrote:

  Precondition can be used for dynamic defining the step to skip or fail, but limit to only Boolean

  The statement above is not correct, you can have any expression as long as they evaluate to true or false. Thus, for example, you can have a prerequisite:

  RunState.PreviousStep.Result.Status is "Passed"

  If the expression above to ensure that the step will run only if the previous test succeeded.

  I think that your problem can be solved using preconditions and post actions.

  Take a look at the attachment.

• How to insert a step to give the position?

  Hello

  I have the sequence with the Select Case structure and to insert steps within the business end. How to do this? I found the index step can be readable by the TS_SequenceGetStepIndex (SequenceHandle, & errorInfo, szTestType, TS_StepGroup_Main, & val), but how to insert new step after, for example the case? For the function TS_SequenceInsertStep (SequenceHandle, & errorInfo, view, iNumofSteps, TS_StepGroup_Main) is not available index (iNumofSteps sucks and does not work as an index of the step and cannot be applied to the order of insertion of the steps (first step on start or end)).

  Currently, I create all (Select, case, end and the steps that need to be in the end case), but if the basic structure can be a default (including case select this option, etc.), only content must be updated, not all construction.

  (LabWindows/CVI coding)

  Best regards

  branar

  Hi all

  Yes, it was the right solution. Only thing, it's that need to take iNumofSteps for the front step and if you want to insert the new stage (or stages), this index should be increased by 1.

  error = TS_SequenceGetStepIndex (SequenceHandle, &errorInfo, "TuningTimeAfterLNA", TS_StepGroup_Main, &val);
                  iNumofSteps=val+1;
                      //add
                      tsErrChkMsgPopup( TS_EngineNewStep (EngineHandle, &errorInfo, "", "Label", &actionStep));
                      tsErrChkMsgPopup( TS_StepSetName ( actionStep, NULL, szTestType));
                      tsErrChkMsgPopup( TS_SequenceInsertStep ( SequenceHandle, &errorInfo, actionStep, iNumofSteps, TS_StepGroup_Main ));
  

  Best regards

  branar

• logical AND with the structure of the event

  Hello world

  The structure of the event can manage several events at once to do the same thing: looks like an OR logical operator. But I have not found a way to sequence events to approach a logic and example: you must click on a button to draw, then enter the image would change the mouse cursor. With a structure of the event, I can handle these 2 events separately or together (i.e. change the cursor), but I can't do a sequence of events.

  Is this possible to do with a structure of the event?

  I hope that I am clear (sorry for English btw). And thanks in advance.

  Christophe

  I don't think this is possible directly. You will need to add status information to your event loop that could enforce the order of events and the rules of logic you want. Where transformation you would have to check whether the required event has occurred before this event. If that were the case, perform your treatment. If this isn't the case, ignore the event. Your first event would need set this status information. You can also include some kind of time-out for the second event were to occur within a specific period.

  This type of logic may be better treated with the help of producer/consumer architecture and a state machine in the task of the consumer.

• Custom event is not captured by the Task Scheduler and unable to trigger by e-mail for the event

  Hello world

  We have installed the 9.0 table in our windows 2008 R2 server and Scheduler tasks to send if you find error occurred for the application in it. That's why we created SMTP inside. First, we have implemented the Task Scheduler and generate an error in the application of the table and run the task manually and we receive by e-mail. But when we go for automation by the custom event. The steps below that I follow:

  1. click the Start button, and then select administrative tools > Task Scheduler.

  2. click on the task of creating in the Actions pane on the right.

  3. in the dialog box create a task in the name text box, type a name for the task and provide a description if you want.

  4. in the section security options, select run whether user is logged in or not.

  5. click on the triggers tab, and then click the new button.

  6 to start the task drop-down list, select an event.

  7. in the settings section, select custom and click the new event filter.

  8. for the event level, select the error box.

  9. selection of the Source, in the event source drop-down list, select the table server checkbox.

  10. click OK to close the new dialog box even filter and then click OK again to close the new trigger dialog box. The event trigger is now configured.

  11. in the dialog box create a new task, click the Actions tab and click the new button.

  12. in the Action new dialog box, in the drop Action, select send e-mail.

  13. under the settings section, fill in the form as required, including the SMTP server.

  Note: It is necessary to enter the valid e-mail addresses in the From and to text boxes.

  14. click OK to close the new dialog Action.

  15. click OK to close the dialog box create a task and finish configuring e-mail alert.

  If please see this and feel free to contact me if you have any information.

  Concerning

  Valerie

  Mob: 469 345 3625

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Popup event on the selection of rows in table tree

  I use jdev 11.1.1.7

  I followed below page to pass parameters between the regions. It works fine if I use a button to trigger the event & pass the id of selected in a table of the tree line.

  Tech Blog of Rohan Walia: events background - Basic step by step: ADF

  I wanted to avoid button, I'm trying to pass data directly on the selection of rows in the tree.

  < eventBinding id = "eventBinding".

  Listener = "org. Apache.MyFaces.Trinidad.Event.SelectionListener">

  " < events xmlns =" http://xmlns.Oracle.com/ADFM/contextualEvent "> "

  < name of event = 'FireEvent '.

  customPayLoad="#{pageFlowScope.ManageOrgsBean.selectedID}"/ >

  < / events >

  < / eventBinding >

  < / links >

  " < events xmlns =" http://xmlns.Oracle.com/ADFM/contextualEvent "> "

  < name of event = 'FireEvent '.

  customPayLoad="#{pageFlowScope.ManageOrgsBean.selectedID}"/ >

  < / events >

  I get a NPE in the 3rd line below:

  {} public void onTreeNodeSelect (SelectionEvent selectionEvent)

  BindingContainer DCBindingContainer = ADFUtils.getDCBindingContainer ();

  JUEventBinding eventBinding = (JUEventBinding) bindingContainer.get ("FireEvent");

  SelectionListener selectionListener (SelectionListener) = eventBinding.getListener (); NPE

  selectionListener.processSelection (selectionEvent);

  }

  Any idea? Thank you.

  Try with:

  JUEventBinding eventBinding = (JUEventBinding) bindingContainer.get ('eventBinding');

• Requisition internal &amp; internal sales order process

  I'm doing 'internal sales order' internal requisition. but stuck at the step 6.

  1. create element

  2 assign org. M1, M2

  3 - create on the amount in "M1".

  4. create internal forced.  (Destination is M1, the Source is M2) and approved it.

  5. create "inner order".

  internal 6-import order.

  When RUN step 6 and view the report log, it shows that.

  "
  Cannot perform the action request Book_order

  N ° orders found: 1

  Imported orders No.: 0

  N ° commands failed: 1
  "

  7-

  System-> profile-> user-> MSC administrator: profile 'YES' it works.

• Turn off the price list column in the sales order

  Hello
  
  I turn off the price list column to use the default value, using after customization of the form in the form of orders.
  
  Event trigger - WHEN-NEW-FOLDER-FORUM
  Trigger - ORDER object
  Condition - NULL
  Actions-
  UPDATE_ALLOWED - FALSE
  ALTERABLE_PLUS (APPLICATIONS COVER) - FALSE
  
  Even if the field is grayed out (disabled) and indicates the default as expected, the user is still able to change the list of prices by pressing Ctrl + L option and selecting desired value.
  How can I limit the LOV to populate the same?
  
  Thank you

  Thanks guys, I already fixed that using constraints of process.

• Order actions in case of amouse

  Hello

  My .swf file, when a mouse event occurs, I would like events to occur. However, I would like that they occur ion a certain order, instead of past all at once.

  My code has objects that appear and an object moving diagonally upward and left at the same time. However, I would like to have objects appear and then have the displacement of an object on the left, and then up.

  Here is my code:

  

  I have more code in the mouse event, but it is arbitrary.

  So is it possible to order the events?

  Thank you.

  It seems yopu use the Tween class, so what you can do, is have the interpolation of first occur and assign an MOTION_FINISHED event listener to the Tween so that you can use its event handler to trigger the following interpolation.

• Hide until a text event

  I'm doing a simple form with a few basic share in. I have a "quantity", the "unit price" and the field "total"; total displays the first 2 added. My problem is that I have multiple instances of these, the 'total' displays automatically £0.00 even when not in service. Is there a way to hide this until the first 2 boxes are filled?

  Let me warn you that I am a beginner and any script involved is probably dazzle me! Thank you in advance.

  It's just a small script. In the Validate event, follow these steps:

  // Custom Validate script for text field
  if (+event.value === 0) event.value = "";