My HP 6500 AirPrint printer does not print after re plug AirPort Express

Similar Questions

• VAMT 3.0 does not appear after installation of SQL Express 2012 and Powershell separately of ADK

  Hello

  I tried to install 3.0 the VAMT tool on a server for a week now and after that installation of the pre-reqs VAMT 3.0 option is gone to install.

  I installed powershell 3.0 and the guys installed DB 2012 SQL express and SQL 2008 management tool.

  It won't let me download pictures, so I guess you'll just I think the VAMT 3.0 is not displayed when I run adksetup.exe the VAMT tool tool 3.0 is not installed. I already rebooted the server.

  The only thing I can think is that I have to delete SQL and install it in pair. That is not sensible, but as Microsoft article says you can install VAMT without SQL express tool.

  My date limit is the end of this month, so any help would be greatly appreciated,

  Thank you!

  Hi Jeff,

  Thank you for your response.

  The problem is related to Powershell 3.0. As this is a complex question, you must post your query in Microsoft TechNet forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  It will be useful.

• Windows Photo Viewer does not properly after installing Spyder 4 Express

  I installed Spyder 4 Express.    Open photoshop and got message this - original use - incorrect color profile so used original and all the images look OK.   But the photos opened through Explorer files (correct thumbnails), but when I preview with Windows Photo Viewer, the images are all very tinted orange.    I then removed Spyder 4 Express hoping to remove the colour profile info, no luck.   All other photo in other software and wallpaper moniter views are correct.   What should I do to correct the display color in the Windows Photo Viewer.

  Hello

  Thanks for posting your concern on the forum.

  According to the description of the question when you preview with Windows photos Photo Viewer are all very tinted orange. Maybe this is a chance that display drivers are getting corrupted or need to be updated.

  As you are referring to the Windows Photo Viewer, I suggest you to check the Windows Photo Viewer is defined as program default for Open the images. You can follow the steps mentioned below to check that.

  1. Press on the the window key + W.

  2. In Search box type in default programs , and then press enter.

  3. Click on Sand your default program.

  4. Now right-click on the Windows Photo Viewer, and then select set this program as default.

  For more details, you can refer to the following Microsoft article mentioned.

  Choose the apps Windows uses by default

  If the problem persists, try to update the drivers and install Windows updates. Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install. Windows warns you if it detects a suspicious or dangerous driver, you should not install.

  Download and install the drivers

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• HP deskjet 3510 does not work after windows 8.1

  My printer HP Deskjet 3510 cannot be detected after windows 8.1.  My computer is a HP Pavilion g6. Now, I would never, I clicked to install, I wish they would send me just windows 7. Laughing out loud

  @klb75,.

  Thanks for posting.

  The cardinal rule of when something does not work after update to 8.1 is put it back in place. This applies to the printing software and all other software. Uninstall from the control panel configuration, programs and features. Then, restart the computer.

  After that, download and install this software: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-108718-3&cc=ca&dlc=en&lc=en&os=4158&product=5157483&sw_lang=

  * Thus, before installing the software, disable all Firewall/antivirus software. This software can create conflicts with the printer software.

  If reinstalling it does not help, run print and scan doctor. He could fix it... http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=CA&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/printer_diag/&softwareitem=MP-135113-1

• HP DESKJET 4645: HPdeskjet 4645 paper jam error does not disappear after a clear path completely according to the internet, ask

  HPdeskjet 4645 paper jam error does not disappear after a clear path completely according to the internet, ask

  Hello, @ghlowell,

  Thank you for the update. You can get the serial number of the printer using the HP utility on your computer. You must have the printer software installed to get the same thing.

  Try the following steps to get the serial number.

  • Go to 'Finder' - select 'Applications' - folder Select "HP" or "Hewlett Packard".
  • Now find and open the "HP utility.
  • Click on "device information. Ideally, this should give details of the printer including the serial number.

    

  Let me know if this helps. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• Does not start after the reload of the operating system

  OK, this is my story of boredom.  I have a Lenovo T61 Type 6463-5BU, S/N L3-xxxxx.  The hard drive died a few weeks ago, and since then, I have received a replacement drive under warranty, that is the exact same drive type.  We had a backup image of the old system under Norton Ghost and managed to get the image to the new disk once it has been installed.  To do this, we used a utility called OS
  'BartPC '.

  Since then, I did pretty much everything I can think of to get the system to boot, including playing with the BIOS settings, setting the drive to 'boot' and 'active' with the help of a number of public services, including the good old "diskpart" and many others.  The reader will just not start.  A few times I could read the disc using Bart in command prompt mode, but I never managed to boot from it.

  The laptop has a finger print reader, but I was told several times that this has nothing to do with the problem.  So... before I cut off the finger of a person and drag in the player... What am I doing wrong here?

  Note of the moderator; s/n, under the direction of protection own members

  AGoodSolutionideas can save I hope as your image.

  For later use, take a look at this document from Lenovo on the use of Ghost; Partition does not start after being restored with Norton Ghost - NetVista / ThinkCentre / ThinkPad...

  I know it says 'prior to 2004 systems', but it is still topical.

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• Bitmoji keyboard does not work after last update iOS 10

  My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

  the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.