After formatting of vista management linux disk & disk restart does not start

Similar Questions

• CHKDSK freezes and Disk Defragmenter does not start

  CHKDSK would not normally start as it says that the hard disk was used?  Asked if I wanted chkdsk to run when you restart the computer.  Selected Yes.  Restarted.  CHKDSK has begun.  A frozen one hour in the audit process and would not move for hours.  Disk Defragmenter does not start also.

  Looks like you need run the diagnostics by the hard drive manufacturer, or
  the diagnostics that came with your computer and see what's happening with
  This hard drive.

  wrote in message
  News: * e-mail address is removed from the privacy... *

  CHKDSK would not normally start as it says that the hard disk was used?
  Asked if I wanted chkdsk to run when you restart the computer. Selected
  Yes. Restarted. CHKDSK has begun. A frozen one hour in the audit
  treat and would not move for hours. Disk Defragmenter does not start also.

• What can I do to correct premierepro CS5.5 after win 7 to win 10 update? It does not start.

  What can I do to correct premierepro CS5.5 after win 7 to win 10 update? It does not start.

  An idea that MAY work to install or run some programs in Windows old 10

  -read what to do in https://forums.adobe.com/thread/1945740

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• After the new installation Mobo and CPU, HDD IDE does not start in XP.

  I have improved my Athlon XP a new motherboard with an Athlon XII after 5 years. XP does not start and gives the following error:

  0x0000007B (0xF789E528, 0xC0000034, 0x00000000)

  I guess that's due to the used on the boards of different drivers. I can't boot mode safe. How can I fix?

  Help, please. Thank you!

  Hello Riggs614

  After Exchange of this type of major equipment, you will have to make at least a "repair" of XP.

  A repair will not lose any data, other that the Service Pack (if not on CD), no matter what Windows updates and unsigned, drivers that will need to be re-installed later.

  Stay offline for repairs and not go online again without a firewall is activated. After the repair of XP, install the Service Pack (if necessary), firewall, then you must install to the all the critical updates then.

  How to fix XP.

  1. start the computer from your Windows XP CD.

  2. When you see the "Welcome" screen press [Enter] to start the configuration of Windows.

  Note: Do not choose "to repair a Windows XP installation using Recovery Console, press R", not wanting to load the Recovery Console.

  3. accept the license agreement and Windows will search for existing installations of Windows.

  4. Select the XP installation that you want to repair in the list, and then press [R] to start the repair. Setup copies the necessary files to the hard drive, and then restart.

  5. do not press a key to boot from CD when the message appears. Setup then continues as if she were doing a clean install, but your applications and settings are preserved.

  http://www.theeldergeek.com/repairing_windows_xp.htm

  Way to scroll to the bottom of page for

  Windows installation CD - repair current Installation

   

  http://michaelstevenstech.com/XPrepairinstall.htm

  .

• After the deployment of a Windows 7 image, pc does not start after Windows logo

  Hello

  I tried to install a laptop via a Windows Image. After that I deployed the image, the laptop does not start past the Windows logo. Normally I had to change the SATA AHCI setting to solve this problem, but he was already on AHCI.

  I tried to install it via a Windows 7 installation CD and it works, but I want to fix the laptop / image to work on this laptop.

  The logo of Windows get stuck, then I get a blue screen very quickly and it restarts. Also when I try to start in safe mode, it's the same thing. loading everything, then it gets stuck and also a really fast blue screen and reboot.

  Someone at - it an idea may be what the problem?

  BR,

  Jim

  I did restore by image much, many times without ever a problem.

  • I only use the integrated Windows 7 image creating installation
  • I only use a DVD + R White, never-r
  • I create the image ONLY on install brand new to be absolutely certain, there is no corruption

  I've heard of this kind of problem does not happen when the image was made from a damaged disc.  Which simply transfers the corruption.

• VMware Vista support physical disk device does not not for some VM.

  I handle Win2k8 64 bit vm on esx5.5 Update 2 which are evidence of "Disk of Vista VMware help" have the error "this device is not present, is not working properly or is not all its drivers installed." (Code 24) ». Versions of VMware Tools vary, either 9.4.0 9.4.5 build-1585188, build-1598834 or 9.4.10 build-2068191.

  Google missed most of the time. I can't find any information on what concrete this virtual device is or what it does in particular, except that it may be involved in the creation of snapshots suspended.

  In addition, the device seems to be attached to the vmrawdsk service, which does not exist on the server. These virtual machines were not P2V, they have been created since iso win.

  One guess what it is and how I might be able to fix it?

  I got it on a working server my copy on the file vmrawdsk.sys missing a server well-known, uninstall VMware Tools, restart, reinstall it and restart again. Then the VMware Vista support physical disk device / service vmrawdisk are working normally.

• Additional HARD disk, PC does not start.

  I'm under a Dimension 9200 on Windows Vista Ultimate Edition.

  I just bought a 1 TB Western Digital Caviar Green Power drive.  I plugged on one of the locations additional sata on the motherboard and pc market.  I have an IDE installed RAID card normally shows directly after the dell logo, and detects my old three disks IDE and their config raid which is fine.

  Reference Dell also provided me with two drives of 320 GB in a raid configuration, using my C drive, which he would then normally detect.  However, when the new drive is connected it just displays an error message, something can not find bios.  I have not disconnected or changed their cables somehow.

  When I disconnect the new drive again, the pc boots fine.

  I tried to enter in the configuration with the drive connected to change the boot sequence, but it won't let me enter the configuration.  I can enter the installer without a connection, and I assured my normal C drive is the first boot drive, but it still does not work.

  I'm not trying to add it to one of the raid configs current sport im, I want just that he's a player, I thought that it would be virtually plug-in, turn on, format and leave, but no luck!

  Someone made me what I am doing wrong?

  Message edited by BiggyG on 09/09/2008 13:39
  
  

• disk cleanup does not start 'Microsoft has encountered an error.

  I am running Win XP Pro SP3.  I tried to do a disk cleanup.  I tried to go through system tools and also start, run the cleanmgr.  Neither one would go.  I get the standard Microsoft window that says an error has occurred and I would like to send a report.  I tried running malware analysis and restart also. Any ideas?

  I'm sorry, that I couldn't find useful on this topic.  For the most part, the suggestion is either give up and download/install Ccleaner or to extract a new copy of cleanmgr.exe.  The latter usually does not have contributed.

  CCleaner is a good utility, but if you go this route, do not use record cleaning option.

  The current version of cleanmgr.exe, which should be located in C:\Windows\system32, is 6.00.2900.5512 that there should be a copy of the same version of the file in C:\Windows\ServicePackFiles\i386.  On my XP Pro system, I have an earlier version 6.0.2900.2180, C:\Windows\$NTServicePackUninstal$ and I have 'the original' in compressed form in C:\i386 (this is the version 6.0.2600.0).

  I saw a suggestion of semi-utile troubleshooting in the latest post (LasseA123) here: http://forums.techguy.org/windows-vista/789412-disccleanup-will-not-run-2.html note, however, that the problem discussed in this thread was in Vista, and that the two keys under this says LasseA123 caused his problem are not present in XP.  If you follow the suggestion here and actually isolate the problem to one or two subkeys, include this information in the post that I am proposing in the next paragraph.

  My only suggestion is to start a new thread, either here, most likely in the Forum of Technet XP3: http://social.technet.microsoft.com/Forums/en-us/itproxpsp/threads with the subject 'Event 1000 Cleanmgr ID' and focus on the disciplines that you pasted here.  If you try to replace the current copy of the cleanmgr.exe with one or more of the files in the location I mentioned above but still have the problem, include this information in your message as well.

• After the updates installed for xp edition family, computer does not start even in safe mode (or in any other mode)

  computer does not restart after installing updates for xp home edition - does not restart in any mode (including safe mode)

  HiRonKlip,

  If you have the Windows XP installation disk, you can perform a manual system restore by following this link.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• interrupted vistas system restore and now it does not start at the top. The only way I can access advanced boot options is by pressing F8

  Then I tried to start Windows normally or in Mode safe and it does not work.

  None of these advanced startup options work effectively.

  When I turn on the laptop, the VAIO large appears and then Microsoft corporation and then a quick start of blue, then it tries to restart again again and again until I hit F8.

  I hope this can be repaired.  Thanks in advance for anyones help.

  Hello

  as none of the advanced startup options does work, try this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• access to the "My Documents" folder on the HARD disk that does not start

  Recently, I got 2 hard drives put in place into a monster of table (SATA) on me. I had an IDE hdd hooked that I had just never deleted. My "mirrored array' failed me so I ended up replacing my MB & CPU and started from scratch. The IDE hard disk has some very relevant info, I need to recover. I can get to basic files in there, but my most important stuff is in my folder 'My Documents' but as far as I can get is to open "Documents & settings". Another thing I try to open fails. I made a password but have no way to enter (at least AFAIK), I would appreciate greatly any help on this problem. Thank you

  Please see how appropriating a file or a folder in Windows XP .
  Boulder computer Maven
  Most Microsoft Valuable Professional

• After formatting my computer pavilion laptop dv6 2171ee wifi does not work

  as what I said in the topic

  the wifi doesn't work do not

  I did some research but I couldn't find the right driver

  This my Fri

  PCI\VEN_8086 & DEV_4239 & SUBSYS_13118086 & REV_35

  any help please?

  Hello

  The support site shows nothing for reader to Intel, which means machine you need to pick up automatically:

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01973748&lang=en&cc=us&TaskID=101&prodSeriesId=4041735&prodTypeId=321957

  Anyway, you can use the following link to download the driver for your machine:

  http://www.Intel.com/p/en_US/support/highlights/wireless/can-6200

  Kind regards.

• Oracle Enterprise Manager 12 c SGD Server does not start every time that I reboot

  Hello

  appreciate your help and your advice on this matter.

  I have a box of Oracle VM configured with windows 2008 R2 Server OS.

  Installed Oracle Database 11g, created a database instance and set the requirements to install more Oracle Enterprise Manager 12 c.

  Every time when I reboot my Windows Server 2008, I have a very hard time from the SGD server

  do a few permutations and combinations for the start of services and get the login page of EM 12 c

  Below error is more frequently encountered:-

  E:\EnterpriseMgr\middleware\oms\BIN > emctl start SGD

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Service Windows what oraclemanagementserver_emgc_oms1_1 could not be started

  Management Server Oracle is down

  Please see E:/EnterpriseMgr/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for the details of the error

  E:\EnterpriseMgr\middleware\oms\BIN >

  In the services I checked for all the permutations, (start the service automatically / manually / automatic with time delay, etc.) but no permit far.

  Can someone Guide please on a solution to this challenge.

  Before shooting the emctl above of the admin command. Prompt BACK, I always make sure to check the database and Stanley are running - connect to it and query.

  Oracleagent12c1Agent - is also started.

  Oraclee_enterp ~ 1_middle ~ 1_omse_enterprisemgr_gc_inst_em_emgc_oms1ConfigurationManager - started

  Oraclee_enterp ~ 1_middle ~ 1_oracle ~ 2e_enterprisemgr_gc_inst_webtierih1ConfigurationManager - started

  OracleManagementServer_EMGC_OMS1_1-> fails to start after several attempts.

  Also, I tried to stop webtier and restart who.

  emctl stop who and then run emctl start SGD

  This model was used to work earlier, somehow its not working as on this day.

  Technically, I'm not a database / Enterprise Manager Administration background - but an Automation tester.

  Try to explore the Real Application Testing and Test data management n hide the Packs of Enterprise Manager 12 c.

  Kindly help

  Kind regards

  Nayan Jacob

  ()[email protected]( )

  Hey Xaheer,

  It worked this time!

  Thanks a lot for a helping hand... Appreciate your prompt response and help to...

  one last thing, can you please suggest what might happen some possible causes of this repeatedly.

  I was faced with this problem for quite some time now and all costs of Reboot Server me almost 30-45 minutes trying to start the EM to get em login screen.

  Can I set up these services to manual start and follow it each time?

  E:\EnterpriseMgr\middleware\oms\BIN>emctl stop who-force

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Stopping WebTier...

  WebTier successfully stopped

  Stop at Oracle Management Server...

  Error: error at shutdown SGD. Please check the error and logs

  Please check E:/EnterpriseMgr/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log to erro

  Details of r

  E:\EnterpriseMgr\middleware\oms\BIN>emctl start from SGD

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Service Windows what oraclemanagementserver_emgc_oms1_1 started successfully

  Management Server Oracle is in place

  E:\EnterpriseMgr\middleware\oms\BIN >

• After installing 17.0.1 on Windows XP, firefox does not start, go to the Mozilla Crash Reporter

  I installed firefox on Windown XP Professional Version 2002 Service Pack 3...

  When I try to start Firefox after installation, it goes to the Mozilla Crash Reporter...

      bp-549b7e51-5401-46fb-9783-c1b692130103
  

  I tried to boot into Safe Mode, but the same results...

  Please help solve...

  Digital Guardian is the source of the problem...