After having removed the Vonage modem, computer can't find Linksys router

Similar Questions

• Wireless acting funny after having removed the PC on the home network - router WRT54G

  Lately I had a strange problem with my wireless. Internet works fine on my laptop and computer laptop of my fiance, but I have the following questions:

  1 Vonage phone works not properly. When the phone rings, it rings a very long cycle, and then when we pick up, the line is dead.

  2 X - Box Live connection interrupts the connection once every 2 or 3 minutes about, constantly.

  3. I can't connect to my linksys config site, and when I ping 198.168.1.1, I get 100% packet loss.

  Here is my situation and how it has changed recently Wireless:

  Set - original up: Desktop connected to the linksys router, laptop of fiance the wireless, no problem at this stage. The modem is Motorola if it matters. Office calculated was used initially to set up the wireless network.

  Computer for office died and I bought my current laptop (which I use to write this post). I connected to the wireless network without existing, although during the first week, there was some notable slowly down on me and my fiance wireless from time to time. I played around with some parameters in the linksys config page and reset the router and things are back to normal.

  However, I recently bought an xbox wireless adapter and was very disappointed by the loss of connection. When I test the connection it says I am connected but my "NAT" is moderate. My config is set so that uPNP is enabled, but I still have this problem. At the same time, we noticed that our Vonage has been screwed up and had the above mentioned problem.

  Today, I tried to connect to the site 192.168.1.1 to access my linksys config page, but I can't access it and as I said, when I ping the IP, I got 100% packet loss.

  I'm at a total loss about what to do and I do not understand how internet our computer can act very well while having all these problems with XBL and Vonage.

  Any help is GREATLY appreciated. Please tell me if you need info to Add ' l and I'm going there as soon as POSSIBLE.

  To check the address IP connect a computer/laptop computer directly to the router on its ethernet port and click on Start > all programs > Accessories > guest... A black box will appear (command prompt)... In the command prompt window type ipconfig and press "Enter"... Look for Ethernet adapter Local Area Connection address IP, subnet mask, and default gateway...

  The address of a default gateway should be the IP address of your router...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - x.x.x.x (where x.x.x.x is the default gateway address), and then on enter. Let the empty user name & password use admin lowercase... It should open the configuration of your router... If it does not accept the default user name or the password then you need to reset your router to the factory settings...

  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  To open the NAT-

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and the type of box in 53, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (2) on the second line in the box, type Application in PQR, in the start box, type 88 and type of box in 88, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (3) on the third line in the box, type Application in XYZ, in the start box, type in 3074 and end in 3074 box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings...

  (4) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  5) click on Setup and change the size of the MTU to 1452 and click on save settings...

  (6) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (7) also assign addresses DNS on Xbox
  Primary DNS:-4.2.2.2... Secondary dns:-192.168.1.1

  (8) turn off your modem, router and Xbox... Wait a minute...

  (9) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

  IP address: part 192.168.X. [last intellectual property in your device] for example if static ip given to the unit's 192.168.X.10 get the last part and put it in the empty box...

  For the without wire that -.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• My HP desktop computer can not find my router wireless already in line with the other 2 computers. Help?

  Vista HP Desktop shows cable with a new Linksys E1200 as connected to 'Unidentified network', 'Local' only without an internet connection.  Same computer, same Ethernet cable connected directly to the ISP modem works fine. Router has been implemented by drive and works very well for a 2nd office direct by cable and wireless laptop.

  Use exhausted with Cisco and they believe that there may be configuration problems they can not help me solve.  Map network shows "works correctly. With current Ipv4 set to auto configure I get very little connectivity at startup until the weather window says service not available.

  Can someone help me to get these two talking?

  Hi FrankeyeAm,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• I got the Adobe after effects of the school, and I can't finde my softwere mocha.

  I started to school and received my adobe package, but I can't finde the Mocha softwere

  You open Mocha inside aftereffects by clicking your footage layer, then will follow-up and follow in mocha.

• After having removed the Spanish language to off the computer I still Spanish not showing, how can I get rid of it?

  I write in Spanish for some letters and some messages and required special letters and accents of the language, so I installed the language pack for Spanish on my Win 7 ultimate, now I took it because he took some orders essentially has no sense and I always left overs and cannot remove them! Example: loads of I-tunes update in Spanish recalls, some applications of the internet are in Spanish, my calendar is in Spanish and have no option to change it, it's like a virus!

  His default. You can try to use English in the United States and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/install-or-change-a-display-language

• sound is very low and after having checked all ALL OF YOU can't find volume upward.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  • Ideas:
  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Your question does contain all the required information necessary for us to help you. Please help us with the following information for a better understanding of the issue:

  1. the problem happens with Windows Media Player, Windows Media Center, or is it whatever the request?

  2. what changes have been made before you encountered the problem?

  3. you have newer and compatible driver for the operating system installed on the computer?

  4. you are using external speakers, or is it the internal speakers?

  Please visit the link mentioned for further assistance on the issue below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• need to remove the old updates, how can I know which ones who?

  I have so many updates in my computer, I think they use a lot of space - I don't have "have a lot of memory left. I have updates dating back to 2002. If I can delete some, can you tell me where?

  Thank you very much!

  E-mail address is removed from the privacy *.

  You should not remove the update but you can delete the uninstall information.

  I'll assume you mean the hard drive space.  You can also use Disk Cleanup to help the removal of junk. You can uninstall old programs is no longer, you use or alternatively, get a bigger hard drive.

  As to your question about updates - see: http://taurarian.mvps.org/WU_XP/removing_old_windows_updates.htm

  Folders that have uninstall as part of the name (for example $NtUninstallKB282010$ who reside in C:\windows (hidden files) are window Hot difficulty updating folders/files) can be removed safely (providing ever, you wish to uninstall the updates). I recommend you leave these records for a period of at least one month to make sure that the update works correctly.

  These updates can be removed individually or together. To learn more about the update/s go on:
  http://support.Microsoft.com/kb/xxxxxx
  NB: XXXXXX = the actual number, not to mention the "Q" or "Ko."

  Once you have removed the uninstall folders/files, then go to control panel, add/remove programs. Select the title of the corresponding Windows fix on the folder/file of the patch you just deleted, and select Delete. You will get a Windows error. This is because you deleted the uninstall folder/files. Simply choose OK and the entry will be removed from the Add/Remove Programs list.

  Don't NOT delete the folder $ $hf_mig

  Cleaning after installation of SP2
  http://aumha.org/win5/a/sp2faq.php#after

  and/or

  XP SP3: Post Installation Cleanup
  http://aumha.NET/viewtopic.php?f=62&t=33827

  Please note this is only for Windows XP and is not on Vista or Windows 7

• I received this error message after you remove the address something about Cloud.app

  I received this error message after you remove the address something Cloud.app.   Can you tell me how to fix this error message. "  '/'  "  ?

  Hello Phyllis,

  When you receive this error now?

  Let's run boot minimum troubleshooting to find the cause.

  Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Windows Vista and Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• I bought Windows XP to my computer at home and I am having to reload XP but I can't find my license key.

  I bought Windows XP to my computer at home and I am having to reload XP but I can't find my license key. Is there a way to get it renounces to buy another copy?

  original title: license key

  Saturday, July 31, 2010 19:23:36 + 0000, jajovik wrote:

  I bought Windows XP to my computer at home and I am having to reload XP

  Why? It is very rarely necessary and is often a bad thing to do. What
  you get problems? There is often much better than solutions
  Reinstall Windows from scratch.

  but I can't find my license key. Is there a way to get it renounces to buy another copy?

  You can find the product key with any of them:

  ProduKey http://nirsoft.net/utils/product_cd_key_viewer.html

  AIDA32 http://www.aumha.org/freeware.htm

  Everest http://www.lavalys.com/index.php?page=product&view=1

  Magic Jellybean www.magicaljellybean.com/keyfinder.shtml

  Belarc Advisor www.belarc.com/free_download.html

  Ken Blake

• I bought the photo College as long as on the photo gallery I down loaded it does not find low .i loaded in my other computer, no problem, I searched in this computer can not find it helps.

  I bought the College picture for my other computer, no problem, I tried to do the same thing with yhis computer can't find it. I went where it should be, but it isn't here.

  Hello, Dorian,

  If you have downloaded in Internet Explorer, go to tools, click View downloads, and you'll see the directory where it has been downloaded. Not visible? Look down, in the bottom left of the word 'options', click on this and it will display the current default folder for downloads, but after writing it down, you can change it to any folder of your choice (mine is C:\__Downloads - always watch first!).

  If you use another browser, go to this toolbar for browsers and search for the download folder and display it. You should find similar settings for the other locations.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available

  Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.

  If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

  Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

• you need to remove the license from computer to move to another PC.

  you need to remove the license from computer to move to another PC.

  It is all the information that I have and you can get on the product. I don't know when and who has been sold, or whose key is. Asked me to pass the software of an older laptop to a new laptop.

  Good luck with that.  Without a legitimate serial number, you're stuck.

  Download the Pro or Standard of X, XI or Acrobat DC versions

  Nancy O.

• How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  You can not.  You must check 'install' to install and run it.

• A computer is visible on the network, but I can't find another computer on the home network.

  Networking troubleshooting maxed out. Need help

  2 running XP Pro Machines on the same network home. At the Working Group under the same name. Check the properties of LAN connection sharing to share. My firewall except for sharing/printer. PING was successful at both. A computer is visible on the network, BUT I can't find another computer on the home network. Any help would be appreciated.

  Hello

  Check if you are able to access the computer.

  (a) press the Windows key + R.

  (b) type the name of the other computer in the open: box in this format:

  \\computer

  (c) press on enter

  You can also try the steps of troubleshooting provided in the link below.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  See also;

  Network map doesn't display your Windows XP computers

  http://TechNet.Microsoft.com/en-us/library/cc754938 (WS.10) .aspx