After installation of the update, I get a folder on my desktop.  Can I delete it?

Similar Questions

• After you install the update, I get this message on an application Facebook '502 Bad Gateway nginx' what is the problem and what should I do to solve the problem?

  After you install the update, I get this message on a Facebook '502 Bad Gateway application
  Nginx' what is the problem and how do I solve the problem?

  See also:

  • http://en.kioskea.NET/FAQ/15289-Google-nginx-404-error
  • [811399/questions/811399]

• After you install the update, I get script error box popping up

  original title: after installing the update I get error script to appear, box what the sam Hill I do?

  I installed an update that recommended the bulk of security on my computer and now I get a script on the screen error message. When I tried to install a gamebar, so that the site wasn't ready yet so my update was unable to download the toolbar. This seems to be the script error that keeps popping up on my screen. I'm not an expert, far from it, in computer science, so I hope someone out there can help you.

  Thanks for your quick response and I appreciate the suggestion, but the person getting impatient that I am, I went to the backup and restore functionality and configure the computer a moment before I started to have trouble and that seems to have solved the problem. If I have problems in the future I will definitely use this site to ask questions, thanks again.

• 52 for USB Composite device driver code (can't check signature of driver) after installation of the updates of August 2014 on Windows 7 x 64

  After you install the updates of August 2014, my keyboard/USB wireless mouse has stopped working, and the receiver is marked as "Device USB Composite" with code 52 - cannot verify the signature of the driver.

  Really, the usbccgp.sys to Windows 7 file is not signed (unlike Windows 8.1), but I've never had a problem with this until recent updates.

  Unfortunately, these values are not in the key "reg" you have asked. (Note: I no longer feel the question).

  I managed to solve the issue of the restoration of a restore point, and at that time system that has pulled the update KB2982791 - I wonder if the problem has been caused by that.

  With all the other August 2014 updates installed, the issue did not reappear.

  

• Cannot download update KB973593, KB973704, KB976416 and KB974561. Installation of the updates fail - getting error 646. Is there a fix for these updates?

  Have not been able to install recent updates. Get a code error and notice 646. Cannot download update KB973593, KB973704, KB976416 and KB974561.

  Hello

  Make sure you have need of updates (in fact have are programs) and if not control panel - Windows
  Updates - click right on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• during the installation of the updates I get error message 646 codes & 643

  need help with error 646 & 643 messages

  need help with error 646 & 643 messages

  Error 643:

  http://support.Microsoft.com/kb/KB976982

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Error 646:

  http://support.Microsoft.com/kb/2258121/en-AU

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Error 0 x 80040154 whe updated after installation installed the update KB915597

  Original title: since kb915597 was installed are not able to update defender and windows

  Since the updates 18/04/2012 for defender and windows update KB915597 I was not able to make updates to get the error code 0 x 80040154 even when I try down loading Microsoft fixit

  Hi Charlie,

  I suggest you try the following and see if it helps.

  Step 1: Clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 to article

  In addition, perform the steps in the following Microsoft KB articles.

  http://support.Microsoft.com/kb/2509997

  http://support.Microsoft.com/mats/windows_update/

  Step 2:

  Temporarily disable the security software.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note:  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

   

  Step 3:

  Uninstall update KB915597.

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Once the update is removed, restart the computer.

  Step 4:

  Try to download the default manually updates on the Microsoft Download site and install the same.

  http://www.Microsoft.com/en-us/download/default.aspx

  If the problem persists, then follow step 4.

  Step 5:

  Reset Windows Update components.

  Run the fixit in aggressive mode, restart the computer and then look for the updates.

  http://go.Microsoft.com/?linkid=9665683

  Hope this information is useful.

• Publish with the installation of the updates and get a code error 80072EFD

  problem checking the updates

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• Blue screen after installation of the updates of Windows in Windows 8.

  Original title: does not

  I clicked on the option Update and shut down and out... when I got home and he lit his does not... its simply display a blue color... what should I do?

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of WIndows/source here
  You can learn more about BSOD here
  You will learn how to test your memory here 
  An effective question gets help more quick read how here
  
  
  
  
  Team Zigzag3143.com  

• After you load the update, I get an error message saying minversion > = and maxversion = < 6.0.2

  I tried to install from scratch and the upgrade and after the upgrade, it comes up with this error and won't load. I have to remove and reload 6.0.

  If you use ZoneAlarm Extreme Security then try turning off virtualization.

  • http://KB.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update

  See:

  • [869951/questions/869951]
  • [869812/questions/869812]
  • [880170/questions/880170]

• Windows Vista unable to boot after installation of the update

  Hello.. I don't know where to ask this question... About 3 days ago my computer was working fine with Vista.  I closed the lid of my laptop, and when I opened it, it is stuck on the green scroll of the taskbar with Microsoft Corporation under him, as when you start up.  I run a system check, startup repair, restored to an earlier date... all I can think about... short reformatting and reloading... suggestions?  I am a teacher and my notebook (which is due by next Friday) is caught in the trap in the confusion!  Thank you
  Jenn

  Hi KieransMon08,

  Thank you for using answers Forum.

  Do you mean the computer freezes on this screen, forcing you to restart the computer from the laptop power button?
  You can log in in safe mode?

  Are there any error messages, that you can post on this forum?
  What happened when you tried to do system restore, did it fail or simply not to solve this problem?
  You have a Vista installation disc, or you use a recovery disk?
  How were you running the System File Checker and system restore?

  Impatience back on your part.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All icons are shaded and wavy after installation of the patch and restart (win xp sp3). How can I fix it?

  After you have installed the latest patches, all icons are shaded with vertical lines undulate on them.  Computers desktop and in Windows Explorer.  Application windows appear clear, but icnos in their midst are the same way.  What should I do to fix this anomaly?

  -J' tried the obvious desktop refresh. No change.
  -J' rebooted in safe mode, and then back to standard mode. No change.

  What else can I try?

  Hi JimGoode,

  Unfortunately, the screenshots are not available in the post.

  Given that the question does not appear in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then use SkyDrive download screenshots of icons.

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

  I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

  Adobe Audition: For Macintosh

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• HP Director launch even after the installation of the updated software. HP Officejet 5510.

  Problem launching HPdirector even after the installation of the updated driver.  Also not scan; message machine wants software installed.  Did not have this right?

  Any ideas?

  [Personal information]

  Hello drudgedread

  Follow the steps below and let me know what happens? These instructions will be clean your temporary folder (a folder that contains temporary data such as data configuration / installation) and rub the printer software with the most recent uninstall.bat utility for your printer.

  First step: clear temp directory
  Type %temp% term or search programs and files of field
  Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  Proceed to step 2 below
  Second step: downloaded and extracted to your system:
  1 download the drivers and full software features
  Complete features Officejet 5510 software
  2. once the download is complete, double-click the file to extract the software.
  3. when the installation window opens, press the Cancel button to stop the installation
  4. tap folder in the race or search programs and files of field
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. right click on the folder and select copy
  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
  8 open the 7z, that you just copied on your desktop
  9 open the Util folder
  10 open the CCC folder
  11 start the uninstall_L4
  12. once the uninstall is complete, restart the computer
  13. run disk cleanup from the tools Accessories\ system under all programs folder
  14. download and install the latest version of Adobe flash player
  Adobe Flash Player
  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan? Also, if there are errors or messages just them down and let me know.