Can deploy us Anyconnect from a specific network?

Similar Questions

• I can't receive attachments from a specific sender in Outlook Express.

  I use Outlook Express.  Spare crossed for everyone except a specific contact.   My colleague, however, can get the attachment if sent by email to us two.  What could be the problem?

  original title: Outlook express and attachments

  It's weird.  Especially if you still have other parts.  Make sure that under Tools | Options | Security (in OE) that you have not configured to block attachments and also make sure that you don't have some sort of interference antivirus or anti-spam (see www.oehelp.com/OETips.aspx#3) - which would block the attachment.

  Otherwise, click file | Identities and together a new identity and then add your email account it and then see if this identity, you get messages with attachments.  If it works fine, then go to file | Import | Messages and import them from the old identity.

  Steve

• Problems with NAT? Can't access internet from inside the network?

  I was intrigued with this problem for a few days now. I'm stuck on what could be the issue. The problem is that I can ping my router, G0/0 and G0/1, to the internet. However, since the switch and my PC, I can not ping Internet. I'm sure that everything is configured correctly, but here is my setup for the switch and the router:

  Router 1:

  version 15.1 no service button horodateurs service debug datetime msec Log service timestamps datetime msec encryption password service ! hostname LAN_Router_1 ! boot-start-marker boot-end-marker ! ! enable secret 5 *. ! No aaa new-model ! no location network-clock-participate 3 ! dot11 syslog no ip source route ! IP cef ! ! ! ! domain IP MyTestLab.com 8.8.8.8 IP name-server IP-server names 8.8.4.4 No ipv6 cef ! Authenticated MultiLink bundle-name Panel ! ! ! ! ! voice-card 0 ! ! ! ! ! ! ! Crypto pki token removal timeout default 0 ! ! ! ! license udi pid CISCO3845-MB sn FOC105013BA username * secret privilege 15 5 *. ! redundancy ! ! property intellectual ssh time 60 property intellectual ssh authentication-2 retries property intellectual ssh event logging property intellectual ssh version 2 ! ! ! ! ! ! ! ! interface Loopback0 192.168.254.1 IP 255.255.255.255 ! interface GigabitEthernet0/0 DHCP IP address penetration of the IP stream stream IP output NAT outside IP IP virtual-reassembly in automatic duplex automatic speed media type rj45 ! interface GigabitEthernet0/1 the IP 192.168.0.1 255.255.255.248 penetration of the IP stream stream IP output IP nat inside IP virtual-reassembly in GLBP 100 ip 192.168.0.4 priority GLBP 100 115 GLBP 100 preempt automatic duplex automatic speed media type rj45 ! ospf Router 5 router ID - 192.168.254.1 network 192.168.0.1 0.0.0.0 area 1 192.168.254.1 network 0.0.0.0 area 0 ! IP forward-Protocol ND no ip address of the http server no ip http secure server ! ! IP nat inside source list 10 interface GigabitEthernet0/0 overload IP route 0.0.0.0 0.0.0.0 dhcp ! access-list 10 permit 192.168.94.32 0.0.0.15 connect access-list 10 permit 192.168.17.0 connect 0.0.0.7 access-list 10 permit 192.168.52.0 connect 0.0.0.7

  
  access-list 10 permit 192.168.0.0 0.0.0.7 connect
  access-list 10 deny any newspaper
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  !

  profile MGCP default
  !
  !
  !
  !
  !
  connection of the banner ^ C
  W A R N I N G

  THIS IS A PRIVATE COMPUTER SYSTEM.

  This computer system, including all related equipment, network devices
  (specifically including Internet access), are provided only for
  authorized used.

  All computer systems may be monitored for all lawful, including purpose
  to ensure that their use is authorized, for management of the system, to
  facilitate protection against unauthorized access, and to verify security
  survival and operational security procedures.

  Monitoring includes active attacks by authorized personnel and their
  entities to test or verify the security of the system. During the surveillance,.
  information may be examined, recorded, copied and used for authorized
  purposes.

  All information, including personal information, placed on or sent over
  This system may be monitored. Uses of this system, authorized or
  unauthorized, constitutes consent to monitoring of this system.

  Unauthorized use may subject you to criminal prosecution. Evidence of
  any unauthorized use collected during monitoring may be used for
  administrative, criminal or other adverse action. Use of this system
  constitutes a consent to monitoring for these purposes.
  ^ C
  !
  Line con 0
  Synchronous recording
  local connection
  line to 0
  line vty 0
  local connection
  entry ssh transport
  output transport ssh
  line vty 1 4
  opening of session
  transport of entry all
  !
  Scheduler allocate 20000 1000
  NTP 198.60.73.8 Server
  NTP 13.85.70.43 Server
  SaveRunConfig event manager applet
  cron cron-event timer entry ' 0 0 * * ".
  command action 1.0 cli 'enable '.
  cli 2.0 action command "RAM".

  Router 2:

  version 15.1 horodateurs service debug datetime msec Log service timestamps datetime msec encryption password service ! hostname LAN_Router_2 ! boot-start-marker boot-end-marker ! ! ! card order type necessary for slot 1 Monitor logging warnings enable secret 5 *. ! No aaa new-model ! clock timezone CST - 5 0 ! dot11 syslog IP source-route ! IP cef ! ! ! ! domain IP MyTestLab.com 8.8.8.8 IP name-server IP-server names 8.8.4.4 No ipv6 cef ! Authenticated MultiLink bundle-name Panel ! ! ! ! type of parameter-card inspect global Select a dropped packet newspapers ! voice-card 0 ! ! ! ! !

  
  !
  !
  Crypto pki token removal timeout default 0
  !
  !
  !
  !
  license udi pid CISCO3845-MB sn FOC1411592J
  username * secret 5 *.

  !
  redundancy
  !
  !
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  property intellectual ssh event logging
  property intellectual ssh version 2
  !
  !
  !
  !
  !
  !
  !
  !
  interface Loopback0
  192.168.254.2 the IP 255.255.255.255
  !
  interface GigabitEthernet0/0
  DHCP IP address
  penetration of the IP stream
  stream IP output
  NAT outside IP
  IP virtual-reassembly in
  automatic duplex
  automatic speed
  media type rj45
  !
  interface GigabitEthernet0/1
  IP 192.168.0.2 255.255.255.248
  penetration of the IP stream
  stream IP output
  IP nat inside
  IP virtual-reassembly in
  GLBP 100 ip 192.168.0.4
  priority GLBP 100 110
  automatic duplex
  automatic speed
  media type rj45
  !
  ospf Router 5
  router ID - 192.168.254.2
  network 192.168.0.2 0.0.0.0 area 1
  0.0.0.0 network 192.168.254.2 area 0
  !
  Default IP gateway 192.168.0.1
  IP forward-Protocol ND
  no ip address of the http server
  no ip http secure server
  !
  !
  IP nat inside source list 10 interface GigabitEthernet0/0 overload
  IP route 0.0.0.0 0.0.0.0 dhcp
  !
  SSH extended IP access list
  permit tcp host 192.168.52.2 any eq 22 log
  permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
  permit tcp host 192.168.17.18 any eq 22 log
  any eq 22 host tcp 192.168.0.1 newspaper permit
  permit tcp host 192.168.0.2 any eq 22 log
  permit tcp host 192.168.0.3 any eq 22 log
  permit tcp host 192.168.0.5 any eq 22 log
  denyip a session
  !
  access-list 10 permit 192.168.94.32 0.0.0.15 connect
  access-list 10 permit 192.168.17.0 connect 0.0.0.7
  access-list 10 permit 192.168.52.0 connect 0.0.0.7
  access-list 10 permit 192.168.0.0 0.0.0.7 connect
  access-list 10 deny any newspaper
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  !
  profile MGCP default
  !
  !
  !
  !
  !
  connection of the banner ^ C
  W A R N I N G

  THIS IS A PRIVATE COMPUTER SYSTEM.

  This computer system, including all related equipment, network devices
  (specifically including Internet access), are provided only for
  authorized used.

  All computer systems may be monitored for all lawful, including purpose
  to ensure that their use is authorized, for management of the system, to
  facilitate protection against unauthorized access, and to verify security
  survival and operational security procedures.

  Monitoring includes active attacks by authorized personnel and their
  entities to test or verify the security of the system. During the surveillance,.
  information may be examined, recorded, copied and used for authorized
  purposes.

  All information, including personal information, placed on or sent over
  This system may be monitored. Uses of this system, authorized or
  unauthorized, constitutes consent to monitoring of this system.

  Unauthorized use may subject you to criminal prosecution. Evidence of
  any unauthorized use collected during monitoring may be used for
  administrative, criminal or other adverse action. Use of this system
  constitutes a consent to monitoring for these purposes.
  ^ C
  !
  Line con 0
  session-timeout 360
  exec-timeout 360 0
  7 password *.
  Synchronous recording
  local connection
  line to 0
  opening of session
  line vty 0 4
  SSH access class in
  Synchronous recording
  local connection
  entry ssh transport
  output transport ssh
  !
  Scheduler allocate 20000 1000
  NTP 198.60.73.8 Server
  NTP 13.85.70.43 Server
  SaveRunConfig event manager applet
  cron cron-event timer entry ' 0 0 * * ".
  command action 1.0 cli 'enable '.
  cli 2.0 action command "RAM".

  Switch:

  version 12.2 no service button tcp KeepAlive-component snap-in service a tcp-KeepAlive-quick service horodateurs service debug uptime Log service timestamps uptime encryption password service ! hostname LAN_Switch ! boot-start-marker boot-end-marker ! ! username * secret privilege 15 5 *. ! ! ! No aaa new-model clock timezone CST - 6 1 supply ws-c3750-24ts switch mtu 1500 routing system IP routing IP - domain name MyTestLab.com 8.8.8.8 IP name-server IP-server names 8.8.4.4 ! ! ! ! ! ! ! ! ! spanning tree mode rapid pvst spanning tree logging spanning tree extend id-system ! internal allocation policy of VLAN ascendant ! property intellectual ssh time 60 property intellectual ssh authentication-2 retries property intellectual ssh event logging property intellectual ssh version 2 ! ! interface Loopback0 192.168.254.5 the IP 255.255.255.255 ! interface FastEthernet1/0/1 switchport access vlan 17 switchport mode access spanning tree portfast spanning tree enable bpduguard ! interface FastEthernet1/0/2 switchport access vlan 10 switchport mode access spanning tree portfast spanning tree enable bpduguard ! interface FastEthernet1/0/3 switchport access vlan 666 switchport mode access Shutdown spanning tree portfast spanning tree enable bpduguard ! interface FastEthernet1/0/4 switchport access vlan 666 switchport mode access Shutdown spanning tree portfast spanning tree enable bpduguard

  
  !
  interface FastEthernet1/0/5
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/6
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/7
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/8
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/9
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/10
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/11
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/12
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/13
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/14
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/15
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/16
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/17
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/18
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/19
  Description # PC #.
  switchport access vlan 10
  switchport mode access
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/20
  Description # X_BOX #.
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/21
  switchport access vlan 94
  switchport mode access
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/22
  switchport access vlan 5
  switchport mode access
  !
  interface FastEthernet1/0/23
  switchport access vlan 5
  switchport mode access
  !
  interface FastEthernet1/0/24
  switchport access vlan 5
  switchport mode access
  !
  GigabitEthernet1/0/1 interface
  switchport access vlan 666
  Shutdown
  !
  interface GigabitEthernet1/0/2
  switchport access vlan 666
  Shutdown
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  interface Vlan5
  IP 192.168.0.5 255.255.255.248
  !
  interface Vlan10
  address 192.168.10.2 255.255.255.0
  !
  interface Vlan17
  IP 192.168.17.17 255.255.255.248
  !
  interface Vlan52
  IP 192.168.52.1 255.255.255.248
  !
  interface Vlan94
  IP 192.168.94.33 255.255.255.240
  !
  ospf Router 5
  router ID - 192.168.254.5
  Log-adjacency-changes
  network 192.168.0.5 0.0.0.0 area 1
  network 192.168.10.2 0.0.0.0 area 2
  network 192.168.17.17 0.0.0.0 area 2
  network 192.168.52.1 0.0.0.0 area 2
  network 192.168.94.33 0.0.0.0 area 2
  0.0.0.0 network 192.168.254.5 area 0
  !
  IP classless
  IP route 0.0.0.0 0.0.0.0 192.168.0.4 permanent
  no ip address of the http server
  no ip http secure server
  !
  !
  SSH_IN extended IP access list
  permit tcp host 192.168.52.2 any eq 22 log
  permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
  permit tcp host 192.168.17.18 any eq 22 log
  any eq 22 host tcp 192.168.0.1 newspaper permit
  permit tcp host 192.168.0.2 any eq 22 log
  permit tcp host 192.168.0.3 any eq 22 log
  permit tcp host 192.168.0.5 any eq 22 log
  deny ip any any newspaper
  !
  !
  connection of the banner ^ C
  W A R N I N G
  THIS IS A PRIVATE COMPUTER SYSTEM.
  This computer system, including all related equipment, network devices
  (specifically including Internet access), are provided only for
  authorized used.
  All computer systems may be monitored for all lawful, including purpose
  to ensure that their use is authorized, for management of the system, to
  facilitate protection against unauthorized access, and to verify security
  survival and operational security procedures.
  Monitoring includes active attacks by authorized personnel and their
  entities to test or verify the security of the system. During the surveillance,.
  information may be examined, recorded, copied and used for authorized
  purposes.
  All information, including personal information, placed on or sent over
  This system may be monitored. Uses of this system, authorized or
  unauthorized, constitutes consent to monitoring of this system.
  Unauthorized use may subject you to criminal prosecution. Evidence of
  any unauthorized use collected during monitoring may be used for
  administrative, criminal or other adverse action. Use of this system
  constitutes a consent to monitoring for these purposes.
  ^ C
  !
  Line con 0
  session-timeout 60
  exec-timeout 60 0
  Synchronous recording
  local connection
  line vty 0
  access-class SSH_IN in
  local connection
  line vty 1 4
  access-class SSH_IN in
  opening of session
  line vty 5 15
  access-class SSH_IN in
  opening of session
  !
  NTP 198.60.73.8 Server
  Event Manager environment suspend_ports_config flash: / susp_ports.dat
  Event Manager environment suspend_ports_days 7
  Event Manager user Directorystrategie "flash: / policies /.
  Event manager session cli username "stw".
  political event manager sl_suspend_ports.tcl
  political event manager tm_suspend_ports.tcl
  SaveRunConfig event manager applet
  cron cron-event timer entry ' 0 0 * * ".
  command action 1.0 cli 'enable '.
  cli 2.0 action command "RAM".

  Well, I totally forgot the keyword "log" and NAT:

  Cisco IOS NAT support ACLs with a keyword "log"?

  A. When you configure Cisco IOS NAT translation dynamic NAT, an ACL is used to identify the packages that can be translated. The current NAT architecture does not support the ACL with a keyword "log".

  http://www.Cisco.com/c/en/us/support/docs/IP/network-address-translation...

  If your problem is not the mask with joker, but the command "log"...

• You can block e-mail from a specific sender reciving

  reciving a Junk Sender emai

  Hello

  MSE is an antispyware/antivirus program and has nothing to do with the blocking of senders on your email.

  You should check with your e-mail provider, as most have methods to block senders on their webmail
  site. Information on Hotmail and Windows Live Mail are below, and other similar

  Answers is a peer group supported and unfortunately has no real influence on Hotmail and Windows
  Live Mail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/
  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  ---------------------------------------------------------------------------------

  Unfortunately the answers is a site of support of peers supported and has no real influence
  with Windows Live.

  Check with Windows Live Support and Forums

  Windows Live Mail Forums
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solutions
  http://www.windowslivehelp.com/solutions.aspx?ProductID=15

  Windows Live Solution Center
  http://www.windowslivehelp.com/

  I hope this helps.

• New to SSL VPN, can I tunnel specific networks without specifying the list of applications with Smart tunnels?

  Hello

  I'm all new to SSL VPN, and I am a bit lost... I tried to get SSL VPN to go for our company and we have been asked to deploy a completely clientless solution that will provide access to our network based on subnets. Is this possible with the chip-tunnels? I tried a few different configurations and it doesn't seem to work. It works with ANYCONNECT but we have to go without a client. They feel that we can do without customer access to destination networks. Is this possible?

  Thank you in advance...

  That's what you can do with a solution without a client:

  1. Allow access to web resources (using the url list)
  2. Allow access to the application of TCP based (using java-port forwarding or smart tunnels)

  If you have to give access to all subnets, then you will need to go full tunnel effect which is Anyconnect SSL.

  HTH

• Can I stream movies from my phone without being on a WiFi network?

  I want to stream movies from my iPhone to my TV, I bought the tv i and when I try setting up it tells me that I can't without being on a WiFi network. I have no Internet and I would watch a movie on my phone on the TV. What should I do?

  If your TV using the HDMI connection:

  7 http://www.Apple.com/shop/product/MD826AM/A/lightning-Digital-AV-adapter?FNODE=9 & fs = f % 3Dcable % % 3D458e % 252B45c4 26fh

  If your TV uses VGA:

  http://www.Apple.com/shop/product/MD825AM/A/lightning-to-VGA-adapter?FNODE=97&FS = % 3Dcable % % 3D458e % 252B45c4 26fh f

• Can I use private as Source IPs from a remote network IP addresses while building the IPSec tunnel?

  Can I use private as Source IPs from a remote network IP addresses while building the IPSec tunnel? If not why? If so, how?

  Your explanation is much appreciated.

  Hi Deepak,

  In such a situation, you usually NAT traffic that goes to the internet, but exempt traffic that goes through the VPN, because it will be wrapped in packages with public IP (tunnel) addresses. You can use the same IP address on your interface in the face of internet for the NAT/PAT and source of IPSEC Tunnel.

• We purchased complete team CC w/One (1) license. If we can deploy specific applications to separate computers, for example the Photo-Design-Acro on a windows computer and first-After effects to a Mac, or license allows - as in recent CS - instalation on 2

  We purchased complete team CC w/One (1) license. If we can deploy specific applications to separate computers, for example the Photo-Design-Acro on a windows computer and first-After effects to a Mac, or license allows - as in recent CS - installation on separate computers of two 2?

  You can activate the subscription creative cloud on two machines, however, you cannot use both machines at the same time. Please check: http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf

  I hope this helps.

• How can I find the index from a specific container?

  How can I find the index from a specific container?

  For example, if I'm crossed by officials texts bound like so (example, not yet tested):

  var doc = app.activeDocument;
  
  var story = doc.pages[0].textFrames[0].parentStory;
  
  for (var i=0, l=story.textContainers.length; i<l; i++) {
       var textFrame = story.textContainers[i];
       if (textFrame.constructor.name == "TextFrame") {
            
            var lastPara = textFrame.paragraphs.lastItem();        //How can I find the index of this in relation to the story?
            
       }
  }
  

  How can I find the index of "lastPara" with regard to history rather than the current container?

  I tried:

  var newPara = story.paragraphs[lastPara.index];
  

  but this translates an object not valid...

  alert(newPara.isValid);      //returns false
  

  The .index property is the offset of the character. Then lastPara will start to story.characters [lastPara.index].

• Can IPS deployment limit political from the traffic speed or router?

  Hello

  I have a small question: can deploy IPS traffic rate limiting political to Cisco switch or router?

  As we know, IPS sensor can throttle suspected trafficking instead of block, don't know if IPS can send policy lever swtich cisco gases or the router.

  Thank you

  -Alejin

  You will find the following on what the PPE can do in terms of rate limiting (it also includes what signature and what routers, what must be configured and what not to set up, etc.):

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/IDM/idm_blocking.html#wp2005501

  The above is on IPS version 7.x.

  Hope that helps.

• Install HP Officejet 6500 E709n failure - can't see the printer on the network

  My HP Officejet 6500 E709n refuses to acknowledge that he is already on the network a specific IP address and used by other computers in my house. How can I get this software install to work?  I have to let Windows 7 install its own version, which worked (sort of).  I prefer having the center of solutions for scanning, but the HP install software (full version), in contrast to the MS Windows 7 software, can't find the printer on the network, even when I give the software the exact IP address.

  (Yes, I uninstalled all the pieces I had to uninstall in Control Panel by the NSB instructions re-re-re-install software page.)

  Hi rchimes,

  Thank you for the update. If you are unable to get the problem solved after using the doctor print and Scan follow the steps to scrub the software on the computer and then reinstall it.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77752-2&CC=US&DLC=en&LC=en&os=4063&Product=3795406&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?

• Can I transfer files from my computer to the iphone doc

  Can I transfer files from my computer to the iphone doc? If so, how?

  Thank you!

  iCloud drive. But you can transfer files that are supported by an installed application. If you mean specifically MS Word documents, you must install MS Office for iOS.

• How can I move movies from my iPhone to icloud

  How can I move movies from my iPhone to my iCloud?

  Can be a little more specific?

  Are you talking about real movies or videos you have taken?

  Where in the cloud you are trying to store?

  Bought films are already "in the clouds" as far as being always accessible - once bought, you should always be able to redownload them.

  Videos taken can be stored in iCloud photo library, but the library of Photo is not really designed to be a permanent storage solution.

  You could potentially upload videos on iCloud drive, but there is a limit to the size that can be downloaded.

• How is "Guest network" differs from the main network?

  I just purchased and installed a refurbished Airport Express. Everything works fine. In the installation program, it gave me the opportunity to create a network of comments, which I did and it works. My question: How is this different guest network from my main network?

  "Guests" that connect to the network comments can only access the Internet.  They cannot "see" devices on your main or private network.

  So if you want to not "invited" to see your personal devices and possibly see your private data on your computer or computers on your private network... or... you don't want to give "guest" password to your network private... it makes sense to leave the 'invited' to use the guest network.

• How can I transfer files from my old pc sony Vista for my laptop new HP 17-j003

  How can I transfer files from my old sony pc running vista for my laptop new HP 17-j003 Windows 8

  Welcome to the HP, Roodie forum.

  There is an easy way to do it using Microsoft Windows Easy Transfer :

  Transfer files and settings from another PC

  -------------------------------------------------------------------------------------------------------------------------------------

  If you do not want to transfer files using the easy transfer method, you can manually make the copy.

  1. You can connect the systems on the same network,
  2. Define the folders that contain your data transfer to 'Share' on the network
  3. Map the drive on your new Vista computer system network
  4. Copy the data you want to transfer

  On the Vista Machine:

  • Open a Windows Explorer window,
  • Right click on the folder that contains the data you want to 'share' (transfer)
  • Click Properties > share > share and follow the instructions to allow the folder to be shared on the network

  On the Machine Windows 8:

  • Windows key (opens the start screen) > anywhere type 'computer' >
  • Click on "computer" to open the "Computer" File Explorer window >
  • Click map network drive and follow the instructions to map the drive

  Don't forget: If your account name is different on the Vista computer, you will need to click on "Sign in using different credentials" and then enter the name of the account on the Vista computer AND the password for this account.

  You can do this with the upper or lower level folders folder level - as long as the folder is shared, you should have general access to the data it contains.

  There are cases where you will not end up being "owner" of the data transferred - you will have to perhaps enter and adjust the property for files / folders after they are copied to the computer of Windows 8.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts.

  Solved?  Click on my answer 'Accept as Solution' to help others to find a solution.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=