After migration from Solaris to Linux reports do not work properly
Oracle e-Business 11.5.10.2 - seeds pdf reports
Some do not run giving error:
EMSG: led by Signal 11
Others work but are formatted incorrectly.
Background:
Migrated from solaris to linux. -11.2.0.4 database. Upgrade from Solaris to dev 6i group patch 28 - everything works.
On linux, install techstack then switch to dev 6i patchset28 also.
I checked the support and apply a hotfix that was a possible fix-
Bugs: 5232832 - APPS6: BLANKS INSERTED IN the CHARACTER MODE OUTPUT
subsequently found out that it's just for the report of the bitmap.
Check all the notes I've found, but nothing seems to apply.
My character set is the same on Solaris and Linux-
US7ASCII NLS_CHARACTERSET
NLS_NCHAR_CHARACTERSET AL16UTF16
Anyone have any ideas? Thank you!
11 signal problem is resolved as follows:
The reporting engine, on the Linux server upgraded, is not able to parse an sql validation using a table via dblink only at a specific location in the report. There are several other places in the report where it is able to analyze the same sql, it is so inconsistent and there is no error message relevant to this effect. The solution has been applied through rewriting of these validations to validate within the EBS itself and therefore, the functionality remains unchanged.
Formatting problem was solved by re copy the rdf from the source in binary mode. Something must have happened to the file to archive original, OR a nobody messed with the report on the target of unknown to me!
Also, I set up printing blocks and drivers for the system and styles, so maybe it was a combination of the two actions.
Thank you for all your help.
Tags: Oracle Applications
Similar Questions
-
11i Migration from Solaris to Linux - utilities AD does not
Hi Experts,
After the migration of the application layer (11.5.10.2) of Solaris 10 for Linux 5 (32-bit) make error when running the utility of AD.
adpatch: cannot execute binary file
ADadmin: cannot execute binary file.
I'm after the MOS notes 238276.1 and everything was smooth until Chapter 2, step 6. But when I need to apply the customer specific patch, I got to know that none of the utility work AD and all of them throw same error cannot execute the binary file.
Once I left the appl Solaris to Linux directory, I transferred in binary mode.
Looking forward for your valuable suggestions please.
Thank you
ShashiGood to hear that the problem is now solved.
And, you're welcome!
Thank you
Hussein -
Migration from windows to Linux - not able to activate maintenance mode
Salvation of DBA
After Migration from windows to Linux, I'm not able to activate maintenance mode, it gives the following error.
Please select an option:
1 activate the Maintenance Mode
2. turn off the Maintenance Mode
3. return to the main Menu
Enter your choice [3]: 1
sqlplus-s & un_apps / * @/s03/oracle/prodappl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
An error occurred while executing adsetmmd.sql.
Continue as if it was successful [No.]:
Please tell me the way farword.
Best regards
Suresh GeldaYou're welcome, Suresh.
Also thanks to Arnoud :)
-
Reconfiguration of Hyperion after DB moved from Solaris to Linux
Our Hyperion databases go from Solaris to Linux. We need to reconfigure Hyperion EPM to point to the new DB of Linux. We have 4 servers Hyperion A, B, C, D.
Server: Foundation Services, area of work, reporting & analysis, planning, Calc Manager, Shared Services, EAS, APS.
Server B: EPMA, Essbase studio
Server C: ODI, FDM
D: Essbase Server
Our intention is to do the steps below:
(1) stop all services of Hyperion.
(2) stop the databases on Solaris servers.
(2) configure Foundation first of all on the services server (Server A) basis, using the EMP system configurator.
(3) set the Foundation on others 3 (B, C, D) servers that are having EPMA, FDM, Essbase etc.
(4) Foundation-Foundation services server (Server A) application server deployment.
(5) configure / deploy DB for the rest of the products.
We tried to do similar steps the last time. We were able to make Foundation, but for other products, he failed. Please let us know if these measures are correct?
We are on version Hyperion 11.1.2.2.300. Operating system is Windows 2008 64 bit.
John, we could reconfigure Hyperion for the new DB of Linux. We used the connection to one up to set up the database and reuse the option existing tables. Thank you for all.
-
Migrated from DPM2010 to DPM2012 and reporting does not work
Original title: due tapes dpm powershell online
Hello
Can someone please? I migrated from DPM2010 to DPM2012 and reporting does not work. The mmc console crashes.
I intend to remove DPM and re - install, but in the meantime, I was wondering if anyone knows how to use Powershell to know which bands are due online and also the most Due strips to go?
I searched through Google on all day, but found nothing so thought I would ask here.
Thank you very much
Willie
Hello
It would be better if you reposted the question to the Forum 2012 DPM. Professionals will help you resolve the problem you are experiencing.
-
DB migration from windows to linux
Hi all
I need migration oracle db 6.2 RHEL 64-bit to 64-bit windows server 2007
DB versions are 11.2.0.3.0 (linux) 11.2.0.1.0 (windows)
Please give what strategies could be adapted to achieve this objective and what is recommended?
Also if possible steps.
Thank you
You can try following steps
List of the steps required to complete the Migration
The migration process is simple, but as there several steps it is convenient to become acquainted with them before you run it.
1. check the compatibility of platform between source and target OS
2. start the database in read-only mode
3. check the availability of database for the transport from Windows to Linux using DBMS_TDB. CHECK_DB
4. check if there are external objects
5 run the Rman Convert Database command
6. converted copy datafiles, generated Transport Script and file settings for Linux
7. change the init.ora for the new database
8. change the Script of carriage and the parameter file change the paths from windows to Linux paths
9. run the Script of Transport
10 change the database ID
11. check the integrity of the databaseStep by step for more information, please consult this document: Database Migration from Windows to Linux using RMAN
-
Original title: Vista update of July 2014
After July 2014 Vista Update orthographic corrector does not work on Windows Mail from 2006. Click on the "Edit" button to correct a GIS spelled the word, the screen goes gray and stop Mail. Uninstall Vista Security Updates (5 discount) on July 8 and the Explorer 9 Cumulative security update solves the problem. (Prove with this reinstallation and uninstallation twice) Have not yet had time to verify that updates 6 is the cause of the problem.
Updated Vista regularly since it was first released. First time I met this specific problem.
Would be grateful for any comments or advice.
I have this to happen on occasion and fix it tool.Try to compact and repair the database with this tool. -
SD card is not working properly after installing windows 10
I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.
Hello LorinMax,
Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!
If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:
1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.
Disk utility (El Capitan): a disc repair
2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.
Try safe mode if your Mac does not end commissioning
Graphics performance limited in recovery of OS X or in safe mode
3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.
Boot Camp Installation & Setup Guide
See you soon!
-
Satellite M40-110: WLan is not working properly after sleep mode
Hello, I have a M40-110. I have some problems with my wireless adapter. After I closed the screen (bed) and the computer goes into sleep mode, I open the computer screen becomes active, but this time the wireless adapter is not working properly and I can't connect to Internet with my wireless adapter. Sometimes, it seems that the wireless adapter has established a connection, but I can't send and receive data from the Internet. Sometimes after this case, the wireless adapter becomes invalid.
My Service offered to enable the bios wake-up-on-lan option. After doing this, the Internet worked properly.
But I am wary about this option:(1) not allowing this option cause draining my battery quickly?
(2) this option doesn't make that hides my hardware failure (wireless card) and it is really necessary to solve this problem?Thank you
Sinan.Cool, thanks for the info
-
Hey, I'm using windows XP on my IBM thinkpad T40.
I noticed after playing a game website (don't remember the URL) that my WSOCK32.dll did not work properly.It is sending a bunch of errors at startup and saying things are corrupt.I think it's a virus, but my scanner come clean. worse yet, I can't play minecraft!Please help me...original title: WSOCK32.dll errorsHello
-What happens when you try to play Minecraft in the computer now? Do you get any error messages or codes? If Yes, what is the error message or code?-What are the exact error messages / complete that appears at startup?Follow the steps mentioned below and check if the problem persists.Step 1: I suggest you perform the steps from the link below and check if it helps.How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista?Step 2: To be sure that there is no infection in the computer, you can try running the Microsoft Safety Scanner in it. The following link will help you get:Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.Hope this information helps. -
After updating IOS 10, hands-free BMW did not work
After updating IOS 10, hands-free BMW did not work
If I want to launch an appeal, all thinking looks like normally, but after 5 to 8 sek. the call will be abort. so I can't use the hands-free system! Others with the same problem?
-
I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?
My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.
-
After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and do not work properly (I already tried several keyboards and is not Firefox or Chrome). This behavior is exacerbated in Illustrator CC, but also affect all programs and even my office. It drives me crazy, does anyone know how I can fix this problem?
Mi IMac is a 27-inch, late 2013, 3.4 GHz Intel Core i5, and use a Wacom Intuos Pro.
Could possibly be interfering with the entry Wacom drivers.
Start safe mode and see if there are still have the problem there. Safe mode is slow and some things do not work, but it prevents some third-party boot loading software. If your keyboard works properly in Mode without fail, this would imply that some third-party software is causing the problem. If so, check the updates.
It also takes more time to start because the BONE is clean some system caches that can also help.
Try safe mode if your Mac does not end commissioning - Apple Support
-
Satellite L670 - after Win 8 upgrade WIFI does not work properly
Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.
The connection only works some time, usually only a few seconds before the connection is lost.
After a few seconds or minutes the connection is restored, just soon to be lost again.Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?
Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...
To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.
But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
The device was working properly under Win 7?I would recommend running a few Wlan test.
For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test. -
After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)
After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.
New Aspire E11, Windows 8.1
Help, please.
Here is how I fixed it:
Go to control panel > network and Internet > network sharing Center
Click on "Change adapter settings" in the left pane.
Right click on your map. Select "Properties".
There will be a box titled "this connection uses the following items."
Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:
KEEP THESE CHECKED:
Client for Microsoft networks
QoS Packet Scheduler
File and Printer Sharing
IP v6
Internet Protocol v4
Driver Link-Layer Topology Discovery map IO
Link-Layer Topology Discovery recallUncheck everything else.
Go to network and sharing, disable and re-enable the adapter.
Maybe you are looking for
-
Hello I also have a problem with this kind of application. I use multithreading communication between my evalboard (stm32F4) and NICVI (my PC with corei3 processor) I do not use a high speed baud rate (9600) but communication is always faster than ex
-
ENVY 4520 All - in - One Printer: Instant ink still holding!
Hello Our small company recently signed for the package monthly instant ink and we have lack of ink about a week ago. We received an email confirming that the ink is on its way; However 5 days later it still not been received and according to deliver
-
problem scanning with keithley 2420
Hello I'm having some trouble to configure the Keithley 2420 to sweep a range of Volt and measure the amps in a cell. The vi attached check the polarity of the voltage, then measure the short circuit current and then performs a scan. The program runs
-
When I try to change user my computer freezes and I just get a white screen
white screen
-
Change the directory to a xmldatamodel
Hello I write xml files with my application and try to define them as a source for some listviews in tabs created dynamically. According http://supportforums.BlackBerry.com/T5/native-development/XmlDataModel-and-QML-read-model-from-data-... This work