Reconfiguration of Hyperion after DB moved from Solaris to Linux

Similar Questions

• After migration from Solaris to Linux reports do not work properly

  Oracle e-Business 11.5.10.2 - seeds pdf reports

  Some do not run giving error:

  EMSG: led by Signal 11

  Others work but are formatted incorrectly.

  Background:

  Migrated from solaris to linux. -11.2.0.4 database.  Upgrade from Solaris to dev 6i group patch 28 - everything works.

  On linux, install techstack then switch to dev 6i patchset28 also.

  
  

  I checked the support and apply a hotfix that was a possible fix-

  Bugs: 5232832 - APPS6: BLANKS INSERTED IN the CHARACTER MODE OUTPUT

  subsequently found out that it's just for the report of the bitmap.

  
  

  Check all the notes I've found, but nothing seems to apply.
  

  
  

  My character set is the same on Solaris and Linux-
  

  US7ASCII NLS_CHARACTERSET

  NLS_NCHAR_CHARACTERSET AL16UTF16

  Anyone have any ideas? Thank you!

  11 signal problem is resolved as follows:

  The reporting engine, on the Linux server upgraded, is not able to parse an sql validation using a table via dblink only at a specific location in the report. There are several other places in the report where it is able to analyze the same sql, it is so inconsistent and there is no error message relevant to this effect. The solution has been applied through rewriting of these validations to validate within the EBS itself and therefore, the functionality remains unchanged.

  Formatting problem was solved by re copy the rdf from the source in binary mode.  Something must have happened to the file to archive original, OR a nobody messed with the report on the target of unknown to me!

  Also, I set up printing blocks and drivers for the system and styles, so maybe it was a combination of the two actions.

  Thank you for all your help.

• 11i Migration from Solaris to Linux - utilities AD does not

  Hi Experts,
  
  After the migration of the application layer (11.5.10.2) of Solaris 10 for Linux 5 (32-bit) make error when running the utility of AD.
  
  adpatch: cannot execute binary file
  ADadmin: cannot execute binary file.
  
  
  I'm after the MOS notes 238276.1 and everything was smooth until Chapter 2, step 6. But when I need to apply the customer specific patch, I got to know that none of the utility work AD and all of them throw same error cannot execute the binary file.
  
  Once I left the appl Solaris to Linux directory, I transferred in binary mode.
  
  Looking forward for your valuable suggestions please.
  
  Thank you
  Shashi

  Good to hear that the problem is now solved.

  And, you're welcome!

  Thank you
  Hussein

• HP Officejet Pro 8600 Plus: HP Officejet 8600 does not scan to computer more - after having moved from the House

  Equipment:

  HP Officejet Pro 8600 more

  MacBook Air mid 2011

  Mac OS X Lion 10.7.5

  ASUS router DSL - N16 (new)

  I moved home and brought my computer and printer with me. I chose a new access provider and sent the new router.

  My old House my computer and the printer/scanner worked fine. Now set up at the new House and I can print but it won't scan. The computer and peripheral HP are connected to the router. I uninstalled all the HP software and reinstalled. On the front of the printer if I select Scan of the computer he says not 'found computer.... ' Make sure that the feature is enabled"using the HP utility. But in the HP utility there is not the option "Scan to Computer" more. I used to be able to scan to the computer to the printer, and I used to have a scanning tab in system preferences / print and scan - but not more!

  Details of what I tried:

  1. Uninstalled HP software.
  2. System preferences / Print & Scan - removed all printers.
  3. On the front of the printer: you click Network and disconnected.
  4. Off, computer, printer and router.
  5. Tour of router on. The printer is turned on.
  6. Used the wireless configuration wizard.
  7. Chose my router - "Found WPS router".
  8. The router WPS button is pressed. 'Network connection' 'successful connection' (n.b. left wireless live 'Off').
  9. Turned computer on - check the connection to the router OK.
  10. System preferences / print and scan - Add printer. He sees my printer - I select this one.
  11. Option to download and install the software of Apple-selected.
  12. Printer appears in Print & Scan-Idle / green spot. There is a print tab and a scanning tab.
  13. Click on the power levels: "Information not available". Click the HP utility: "unable to communicate with the device selected. Try to print: "the printer is not connected.
  1. Go to support.hp.com/gb-en/drivers - type in the printer model.
  2. Download the installation software "HP Officejet Pro driver software and full functionality" version 12.23.0. Save the dmg file.
  3. HP download and install the wizard downloads files on computer. Click on dmg download, double click on HP Installer.app.
  4. Click the HP Installer dialog box. Ignored HP ePrint offer.
  5. "Select the device you want to install" - no device is listed. Click on «my device is not listed...» "and"continue ".
  6. Select model device drivers - 8600 network / wireless Officejet Pro. Installation options: checked HP recommended software and additional software.
  7. Software installed with success, but still need to configure the device. Press to continue.
  8. Device not shown yet. Add device manually, using the IP address of the printer. Printer is displayed.
  9. 'Add the Print Queue' box - must add the printer to the system by using the "add a printer".
  10. Click IP in the toolbar. Protocol: HP Jetdirect - outlet. Enter the IP address of the printer. "Print using" field shows my device. 'Add '.
  11. Back to the installer - congratulations! Successfully installed.
  12. Utility HP ok - prints ok.
  13. On the front of the printer: select Scan / scan to computer: «no Found computer...» Make sure that the feature is enabled. Mac OS X: open utility HP. Under scan settings, click Scan of the computer, and then make sure Enable Scan to computer is selected. »
  14. In the HP utility, there is no "Analysis settings" or "Scan to Computer". There is "scan to E-mail and"Scan to Network".
  15. In the system preferences / print and scan - it doesn't have the printing tab and the tab analysis (see 12 above)
  16. Check the built-in Web server. Wireless status is connected. On the scanning tab I can Webscan to computer (but only 1 page at a time - not good for multi-page documents!)
  17. Try Apple Image capture - no devices specified in the list of devices.

  Hello

  First, make sure you have the latest firmware installed as follows:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series---N911/4322915/model/4323647/document/c02919168/

  Then, try the following:

  1. Of the printer, click on the right arrow / left and press the ion of the configuration of the printer.
  2. Select Network Configuration.
  3. Select direct Wireless Configuration.
  4. Ensure the Direct wireless is enabled and take one step of his password if such a value.
  5. Click on the WiFi icon from your Mac and connect to the SSID 8600 spirit "live / Print" in its name.
  6. Go to System Preferences > print and scan and click on the plus sign to add the printer - you see it listed as Hello via the direct wireless connection?

  Please let me know the results, if it not listed as Hello with Direct wireless, which clearly show that the new router interrupts the multicast connection, this is the same as the connection through a different router.

  On your screenshot, it seems that your router do not transfer packets to multicast to the need...

• Comment to recover missing components after having moved from "Adobe" from program files and program files on another hard drive internal?

  Hello

  I know that the title is long, but I'll try to be clear. I am currently working a lot on Premiere Pro CS6, since I else riding between movies and my drive Windows C is saturated. Jso got the real good idea to create an Adobe folder on one of my other internal drives and y 'cut and paste' (the thing never to do...) "Adobe" from program files and program files, in order to address space. So I created a file Program Files and another program with them each in a subfolder 'Adobe'. Following this bad initiative, opening again my firstsoftware, you can imagine that I had several bugs no one telling me that it lacked components (obviously) and my renderings, which once on two resulted in a "the software has stopped Monday and needs to close" (trickier).

  I have the coup d'etat switched back the folders on drive C (story of a little more drive the nail), the missing components error message no longer appears, however problems rendering and stop persistent software.  Knowing that about 15 GB is miraculously freed himself... not what is more difficult, but also probably explains the bugs...:)

  My question is the following should I uninstall and reinstall (Creative suite) where there's a you it another solution pour everything in order? Knowing it will take anyway that my C drive is dé-sature a bit.

  Thanking you sincerely pour your help, your guidance, your time.

  You cannot move a folder from one drive to another program (as you know) because that destroys the links that the operating system must have in order to run a program

  Disable this feature to unlock your serial number... Uninstall... Install fresh... also, the Adobe programs do not LIKE to install other drivers

  Move the data files to another disk to free up space on your C drive

  C drive space http://forums.adobe.com/thread/1007934?tstart=0 see answer 4 for the parameter that you must manually change... and then delete the old temporary files

• moving from windows to linux host host

  Does anyone have any experience with workstation pro 12 comments mobile from windows to a linux host computer host?

  If Yes, can it be done?

  Thanks for your time.

  Hello

  Yes, this is no problem at all.

  Your VMS even will run on a Linux machine as they did under a windows host.

  The only problem is that if you link to a resource that explicitly is windows-only.

  For example. A share under a numbered car won't work, or not a cdrom on D:\

  Your VM will indicate on startup. BTW, when he asked 'have you move or copy' then choose 'move' otherwise your virtual hardware will get new hardware ID and for windows which means triggering activation.

  --

  Wil

• HP Officejet Pro 8500 has: WIFI connection to printer after moving from a computer in another city

  I recently moved from Nevada to California with my printer.  I can't go to the printer.  The wireless light is lite. The printer has worked with this computer I Nevada. Promp in window says "printer is unable to connect to the server.

  "You can connect to the server through a proxy server" what is a proxy server address

  Hi @Raggetty ,

  I understand that you are having problems with the printer via the wireless network. I will definitely do my best to help you.

  Since you have moved, you must install the printer on the network.

  If you haven't already done so, restore the default settings of the network printer. Go to configuration, network, restore default network.

  Then set up the printer on the network again.

  Follow this document:

  Configure the printer to a wired network or wireless for the HP Officejet Pro 8500 has e-all-in-One Printer Series.

  If you need help to set up the printer on the network, let me know.

  Good day!
  Thank you.

• Messages do not automatically moved from the Outbox to the sent items

  Hello. Everything worked fine until 08:00 this morning.

  Now, when I send an email, it is sent but is not automatically moved from Outbox sent items. So, I get an error message (but no error code. He says only: "some errors occurred while processing the requested tasks"). Because the message remains in the Outbox if there is another message to send that it will send the first once again, and then the second, then the first again, then the second again, etc. The only way I can work around it must manually move each e-mail sent from the Outbox to sent items. The messages are efinitely goes recipients because they are responding to their

  I am running Windows XP Professional Version 2002 Service Pack 3 and Outlook Express

  Any thoughts would be very welcome

  Best regards

  You have apparent dbx file corruption.
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 

• Files becomes locked after be moved. Help, please!

  I am running XP Home SP3. I recently had to repair my OS of the OSDisk from my computer, because of an accident of BONE. Almost everything works fine now, except when I move any kind of file or folder (regardless of the means of transport [copy, cut or slip]). After I moved the file or folder, whenever I try to open it, it tells me access is denied, and I can't remove items without using external programs like FileAssassin.

  Although I realize that there are many people who will say "go in safe mode and give yourself permissions... '. "That can allow me to delete THESE files, but it will not solve the problem and allows me to move files here on out.

  Any help would be greatly appreciated.

  I would have to question the way that files have been placed on the disk after the accident of the OS.  It is possible that these files are still attached to the owner under the old system.  Even if your user name is the same on the new system, the owner as determined by Windows is based on the SecureID (SID) on the file, that will be different on the two systems.  My first step would be to go to the top of the page directory of these restored files and take possession of them to make sure that your new user has:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  If this does not help, you can get some clues in this article:

  "How permissions are handled when you copy and move files and folders.
    <>http://support.Microsoft.com/kb/310316 >

  HTH,
  JW

• Cannot change the number of laptop Apple ID because I moved from the India

  I can't change the number of mobile for notifications in my Apple/iCloud account, it shows my old Indian number but I moved from the India and now Iam in Tanzania. He asked security questions that I don't even remember...

  I can not yet implemented iCloud keychain...

  Need help, he cannot set up on my Mac, the iPhone or iPad

  You can change preferences/iCloud/Keychain/options of the system?

• I'm moving from PC to iMac. I think that I have brought successfully my profile. My work id of addressbook, but no mail received file is obvious.

  I'm moving from PC to iMac. I think that I have brought successfully my profile. My work id of addressbook, but no mail received file is obvious. The Mail subfolder in the profile of 'new' - "Mail" - is about the same size - 1.6 GB - as it was on the PC, so I guess that the mail has not moved, however, there is no sign of what I can find on the page "news" of Thunderbird. I did move by copying the profile folder of the PC on the Mac desktop, raise the profile of Mac beside him folder and dragging the PC Mail subfolder to the mail folder in the Mac profile. I think I am way over my head here; I really want to solve the problem, so I can mothball the PC. Thanks is advance for your help.

  OK, the ini file will be

  MacHD>Users>RKW (me)>Library>Thunderbird
  

  The profile folder will be in MacHD > users > RKW (me) > library > Thunderbird > profiles with a name like d1234pg. By default. When copying content. It is this lower level folder called. Not MacHD > users > RKW (me) > library > Thunderbird > profiles.

  To simplify a little (I hope so.

  Install Thunderbird. go to the Help menu in Thunderbird and select troubleshooting information.
  In this tab, click on the button show the frlder for the profile.
  Finder will open with the open current profile folder.
  Close Thunderbird.

  Now, locate the old profile folder, it will be contains pref.js as a file among many others.
  Copy the files and folder to this folder, and place them in the new folder Thunderbird open in the Finder for you. To replace the files.

  Open Thunderbird and you should have it all.

• I lose my apps apple makes such as numbers, pages, imovie, garageband etc after restoring backup from my iphone recently brought 6 s

  I lose my apps apple makes such as numbers, pages, imovie, garageband etc after restoring backup from my iphone recently brought 6 s why? I just brought a new phone and restore from backup, but after the restoration of my new devices I don't see it.and I pick up on the app store and its application to pay... its happened... there please help me anyone... Thanks in advance

  new phone iphone 6s 128 GB

  iOS 9.2.3

  Are you logged in using the same as before Apple ID? Under the "iTunes and App Store", you can check in the settings menu.

• Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not what should be checked in t

  Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not, what needs to be checked in the menu options for mode 2 window window... I use Version 23.0.1

  Hi gordie, you could use an addon to restore this configuration of the user interface: https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/

• If I move my pictures from my macbook air to the icloud storage remove them from my disk hard mac without them moved from the icloud?

  If I move my pictures from my macbook air to the icloud storage remove them from my disk hard mac without them moved from the icloud?

  Hello there, bfo4nne.

  Looks like you are trying to manage your iCloud-storage space to save space on the hard drive of your MacBook Air. The following Knowledge Base article provides a well rounded explanation of managing storage iCloud:

  Manage your iCloud-storage space

  Thank you for reaching out to the communities of Apple Support.

  Sincerely.

• Issues - his sound is moved from external sources to portable speakers when in a call

  So, I had this problem for quite a while now - what happens is when I receive a Skype call and continue to play a game, listen to music, watch a video, nothing that involves her; this noise is moved from my headphonees/speakers to my crappy Laptop speakers. I want that all my sounds playing through the computer source from one office and Skype. How would I do that?

  Try this:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-audio-splits-to-both-headphones-and-speak...