After migration of PCD problem

Similar Questions

• DRM after migrating to laptop problems

  Hi, I have a new MacBookPro and am running Windows XP SP3 via VMWare. I recently migrated the data on my new laptop from a former. Since then I've been doing a DRM fault trying to use Overdrive. I went through the steps to reset my DRM and failed. The option button in the security component page cannot be selected. All ideas

  Hi Michael,

  How have you tried resertting DRM?

  You can read the following article and try the steps to manually reset the DRM rights.

  When you try to use Windows Media Player 11 to play a digital camera digital rights management (DRM) - multimedia file protected, the media can not play

• Problem with WIFI after Migration

  Hello everyone

  I'm new here, I have the small problem after migration of 10.9.5 system.

  I migrad my files to a MacBook Pro start 2014 for a Mac mini mid-2012.

  After the migration is successful on the Mac mini, the WIFI does not work on the Mac mini.

  I think it's a fault of the driver, but how do I install the WLAN driver?

  Thanks for the support

  Best regards

  Demian Klee

  Were the two Macs on 10.9.5? If this is not the case, what were the OSX versions?

• Mail of the El Capitan grayed out after Migration Wizard menus

  The arrival of my new MacBook Pro (OS 10.11.5) I used the Migration Assistant (MA) to import the data from my old MacBook (OS 10.6). MY did not have identical usernames on both devices, so a new user has been created for the migration.

  After migration, everything seems to work very well in most mail (and some obsolete applications).

  Problem: some menu of messaging options are grayed out on and/or non-functional. Strange thing is that Mail works fine in the other user account, so I guess that's a conflict somewhere, sometimes, preferences will not open. New emails correctly, they appear in notifications and can be opened individually, but I can't open the message viewer.

  Grey of menu items:

    

  What I tried without success:

  -delete all e-mail accounts and add them manually

  -remove mail preferences

  -Remove user library: containers, mail, mail preferences folder

  -disable the user fonts

  -Disable items in user login

  Any suggestions much appreciated troubleshooting.

  Problems like this are sometimes caused by files that should belong to you but are locked or have the wrong permissions. This procedure will check for these files. It makes no changes and is therefore not, in itself, a solution.

  First, empty the trash, if possible.

  Triple-click any where in the line below on this page to select, then copy the selected text in the Clipboard by pressing Control-C key combination:

  find ~ $TMPDIR.. \( -flags +sappnd,schg,sunlnk,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing command + V. The command may take a significant amount of time to run.

  Wait for a new line ending with a dollar sign ($) to appear.

  The output of the command will be a number. It is automatically copied to the Clipboard. Please paste in a response.

  The Terminal window does not display the output. Please do not copy from there.

• Classic report shows wrong "could not parse the SQL query: ORA-00942" error after migrating app to the new environment

  After migrating my APEX 4.1 application to a new environment, one classic report displays a "cannot parse the SQL query: ORA-00942: table or view does not exist" error when the page is displayed. Change the region to report SQL source to somehow (e.g., remove spaces, changing the order of the variables in the WHERE clause) immediately solves the problem, but by returning to the source of the region causes the report error again (the source region valid code without error, however).

  Throw the error message:

  Select v.id,

  v.Col1

  of view_vw v

  where (: P1_FILTER is null or)

  v.col2 = :P1_FILTER)

  Do not throw error:

  Select v.id,

  v.Col1

  of view_vw v

  where (:P1_FILTER is null or)

  v.col2 = :P1_FILTER)

  Changing the order of column in the report has the same effect; i.e. He arranges, but return back to the original column order causes the error to display.

  It's as if a cached result for the correct select statement used by the report is displayed. However, the application does not use the caching of page/region. Any ideas of what could be the cause?

  He solved. Ultimately, all that was necessary was to clear the DB cache using:

  alter system flush shared_pool;

• After migrating to a new iMac, my applications Adobe CC back to trial versions

  After migrating to a new iMac, my applications Adobe CC back to trial versions. How can I fix this please?

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• Masking of rows/columns reappear after migration via LCM?

  Anyone know if there is a known issue or bug related to Web forms and then of the migration by LCM, hidden rows or columns suddenly reappear after migration? Were on 11.1.1.3.x
  
  
  Thank you

  Seems there is more connected to 11.1.1.3, which are not yet fixed bugs:

  BUG 9354660 - EXPORT OF WEBFORM WITH HIDDEN LINE NOT EXPORTED CORRECTLY

  Bug 10167989: BUG 8374286 is NOT RESOLVED FOR FORMS WITH ASYMMETRICAL COLUMN SELECTIONS

  Known problems section 11.1.1.4 Readme planning: ' after exporting to a destination application using life cycle management, Forms data containing hidden lines may not display correctly in the destination application.»

  HTH-
  Jasmine.

• After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  # Multimedia files are hardlinked.

  (141516)

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• Satellite C70D-B-307 - brightness keys stopped working after migration Windows 10

  The brightness keys have stopped working after migration Windows 8.1 to Windows 10 (Satellite C70D-B-307).

  How did solve you this?

• I looked under system restore points and the earlier it had was on March 27, which was still after that I got problems

  Good so my computer has some corrupted files... I looked under the system (Yes, including the section 5 days ago) restore points, and the earlier it had was on March 27, which was still after that I got problems... I want a later date... Help, please.

  Hello

  If there is no previous restore points until 27 March, including even more that 5 days more then they just do not exist

  and you can not do something which

  Follow these steps instead:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• SYS. Dbms_metadata - error after migrating to 11 GR 2

  Gurus,
  
  I get a SYS. Error dbms_metadata after migrating to 11 GR 2 10 gr 2 RAC RAC. its worked well to 10 GB but now throwing error.
  

  onnected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, Real Application Clusters, OLAP, Data Mining
  and Real Application Testing options
  
  
  SQL> select object_name,object_type from dba_objects where object_name='STUDENT';
  OBJECT_NAME          OBJECT_TYPE
  -------------------- -------------------
  STUDENT            SYNONYM
  STUDENT            MATERIALIZED VIEW
  STUDENT            TABLE
  
  SQL> select
  dbms_metadata.get_ddl(object_type => 'MATERIALIZED_VIEW',name =>'STUDENT',schema => 'SCOTT')
  from dual;
  
  ERROR:ORA-31603: object "STUDENT" of type MATERIALIZED_VIEW not found in schema "SCOTT"
  ORA-06512: at "SYS.DBMS_METADATA", line 5088
  ORA-06512: at "SYS.DBMS_METADATA", line 7589
  ORA-06512: at line 1

  How can solve us this error. I already gave the select_catalog_role SCOTT but id did not work. Need help.

  see the mos score:
  DBMS_METADAT. GET_DDL on a MV translates ORA-31603 [1467126.1 ID]

• Download to Excel after migration to 11g: Table losing formats

  Hello
  After migration to 11g, we do some tests.
  Download to Excel does not work correctly. Computed column losing the round, Table with green line loses the format of borders.
  Is this a known issue?
  
  Kind regards
  
  Stefan

  Yes. Refer to ID 1380981.1 and ID 1451127.1

  It depends on what version of OBIEE you are editing well and the locale set to Excel.

  Please assign points if helpful/correct.

• Fonts missing after migration to InDesign CS3

  After migration to InDesign CS to a new PC, a font is missing: Arial Narrow family. I've used this for large number of tables in a book, I need to find a method to retrieve this font. Arial Narrow police is listed in the installation of Windows fonts (Vista). The police is also listed in the font list of InDesigne CS3 on my old PC.

  Is there a way to fix this?

  Thanks, Joop

  http://InDesignSecrets.com/hotfix-corrects- arial-narrow- issue-on - windows.php

  If this does not work, you will need to copy the old policies of the other system and reinstall new versions.

• After migration

  Hi gurus
  
  
  Ive got a request from one of the users that the BD after migration to 9.2.0.8 to 10.2.0.4 in some tables, the order of the columns changed and if some errors are coming
  
  
  I searched documents but cannot find anything. I wanted to know that is what is actually happening and if that happens then how to rectify them.
  
  
  Thanks :(

  Hope that the migration has been successful and you have not all invalid objects after migration.

  In addition, take a look at the Oracle Metalink for known issues and references

  Note: 316889.1 - object: checklist complete for upgrades to 10 g 2 manuals

  Kind regards
  Sabdar Syed,
  http://sabdarsyed.blogspot.com