After RAM upgrade disk HARD is not visible on Satellite A660 - 11M

Similar Questions

• After RAM upgrade my A60 will not start

  Today I attemed to install new RAM in my A60. It didn't go very well and when he was in and I tried to start the computer, it would have started with amd before turning off again a few seconds later.

  So I took the new RAM and tried to start it and it was fine. I then put the new ram back in and had the same problem, so he pulled out again, but once again with the new RAM it wouldn't start.

  How can I get to do it again?

  Hello

  Of course, you use the incompatible module and because of this unit do not start correctly. Please, send it back and order form.

  Compatible modules are:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Good bye

• Disk groups are not visible cluster. vSAN datastore exists. 2 guests (on 8) cluster do not see the vSAN data store. Their storage is not recognized.

  http://i.imgur.com/pqAXtFl.PNG

  http://i.imgur.com/BnztaDD.PNG

  Do not know how even tear it down and rebuild it if the disk groups are not visible. The discs are in good health on each host storage adapters.

  Currently the latest version of vCenter 5.5. Hosts running 5.5 build 2068190

  Just built. Happy to demolish and rebuild. Just do not know why it is not visible on the two hosts and the disk groups are only recognized 3 guests when more are contributing. Also strange that I can't get the disk groups to fill in vCenter. I tried two different browsers (chrome and IE).

  I have now works.

  All the identical 5.5 relies on ESXi hosts. All hosts are homogeneous CPU/sum of the prospects for disk controller / installed RAM/storage.

  I have work. I had to manually destroy all traces of the vSAN on each single to help host node:

  (1) put the hosts in maintenance mode and remove the cluster. I was unable to disable vSAN in the cluster, I made on each node host (manually via the CLI below) then disconnected web client vCenter and return to finally refresh the ability to disable on the cluster.

  esxcli vsan cluster get - to check the status of each host.

  esxcli vsan cluster drop - the vSAN cluster host.

  storage of vsan esxcli list - view records in the individual host group

  esxcli vsan storage remove-d naa.id_of_magnetic_disks_here - to remove each of the disks in the disk group (you can ignore this using the following command to remove the SSD only falling each disc in this host group).

  esxcli vsan storage remove s naa.id_of_solid_state_disks_here - this is the SSD and all the magnetic disks in a given disk group.

  After that, I was able to manually add hosts to the cluster, leave maintenance mode and configure the disk groups. Aggregated data of the vSAN data store is correct now, and everything is functional.

  Another question for those of you who still read... How to configure such as the VM storage strategy that migrates towards (or inspired) the vSAN data store will immediately resume the default storage policy, I built for VSANs?

  Thanks for anyone who has followed.

• After the upgrade to IE 10, not able to download/export users excellent reports in Oracle EBS 12.0.6 forms order orgranizer

  After the upgrade to IE 10, not able to download/export users excellent reports in Oracle EBS 12.0.6 forms order orgranizer. It of something to do with the settings of internet explore, please advise to solve this problem.

  The new window opens and immediately disappears.

  Thanks for your replies.

  We can get the exported file now. In IE 10, all results export are saved temporarily in the download options, press Ctrl + J (view downloads) and save the results and open it.

• Hard drive not visible after installing Windows 7

  My second hard drive is no longer visible in 'My Computer' since the installation of Windows 7 (new installation).   The two drives appear in Device Manager, and apparently both work correctly.  The hard drive I have Windows 7 on is the first SATA and the second hard drive (which is not visible) is the first IDE.  Any ideas?  Thank you!

  Right-click on my computer, select manage.  On the next page, click Disk Management.  It will be displayed on the right side, just assign it a drive letter.

• Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

  I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

  Thank you

  > I would like to know whether to extend the warranty for laptop RAM is maintained.
  RAM upgrade does NOT affect the warranty.

  Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
  [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

• XP is no longer valid after the upgrade of hard drive.

  Help me please

  I upgraded my hard drive and uploaded my old xp but it tells me this isn't a valid xp, what hurts

  What is the EXACT error you get and when message?

  How did did you transfer the old "xp"?

  If you managed to install it, but are unable to activate, try to use telephone activation - do not meet the request of ansafone for the service that you need, and you should be transferred to a live operator who can help.

• Data from external hard drive not visible

  My computer has been recently infected with the virus to restore Windows. As soon as I was aware, I unplugged my network cable and a drive external hard (without using to remove the device safely), who has all my data. I then used a previous restore point to get rid of the virus, which was apparently with success, because there is no remaining trace.

  Now, the external hard drive is not visible in Explorer. Other utility programs say that the data is always there, but I can't see it or access it in the usual way. This drive worked perfectly up to this point. I tried to restart, unplug the external drive and reconnect it and using a different USB port, but so far nothing has worked.

  How can I get Vista to recognize my external drive?

  Hello

  Run the system restore will be not delete or remove the virus on the computer. System Restore helps you restore system files from your computer to an earlier point in time.

  First I suggest you to run the check, and online virus scan if no malware or viruses detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  For the problem with the external hard drive, follow the methods below:

  Method 1:

  Check if the device is detected in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window, locate the drive

  Method 2:

  Run the fix it from the link below and check if it helps. Link: Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/

• Adobe Acrobat 2015.016.20041 after updating toolbutton 'replace text' are not visible

  Hello

  After updating Acrobat dc 2015.016.20041 in the commentmenu the toolbutton is not visible.

  Please yiou can tell where is the button.

  for my work is important button, because I m making the text for a magazine.

  Please contact me: [email protected]

  Hi stefanf65894335,

  There are a few changes to the annotation tool. You can select the text and then right-click on it, you will get "Add a note to replace the text" option in the drop-down list.

  Refer to this thread for more information:

  'Enable shortcuts for text correction.

  Commenting tools disappeared in the update

  See also this KB doc: Annotations: Text Correction commenting Tools Update

  Kind regards

  Meenakshi

• After R12 Upgrade login page is not displayed.

  After R12 Upgrade from 11.5.10.2 login page is not displayed.

  I still believe that it's something with the compilation of JSP.

  Please review these documents (search for 'oracle.classloader.util.AnnotatedClassNotFoundException')-[454178.1 ID], [ID 467562.1], [435550.1 ID]

  Please make sure that you compile JSP files successfully and bounce enforcement then.

  Thank you
  Hussein

• solution found for the disk hard main not press f1 to continue

  I need a solution for, primary hard drive not found (press F1) continue.
  my Dell Dimension 4550 system.

  When you start your computer to the screen Dell should be the first screen that you see. When it seems to get instructions on which key press to enter the bios. It must be something similar to "Press F2 to enter the set - up" (F2 is the right key for many Dell but is just one example). Your computer may require you to press Del or some other. Once you are in the bios first of all make sure that the hard drive is listed. If not, then either you have a bad cable connecting the drive to the Office, a bad hard drive or a bad (probably not the Council... Breathe now... lol). If the hard drive is detected in the bios, then navigate to the boot menu order (sequence) and make sure the hard drive is set as the boot device. It should normally be set to be the second boot device with the cd/dvd rom being the first device.

• 3 USB ports on 4 does not work on Satellite A660-12th

  Hi, I have a problem with my laptop french: 3 or 4 of my usb ports does not work.

  My laptop is a:
  Satellite A660-12th
  Reference: PSAW3E-02700GFR

  I almost tried everything:
  -reinstall all drivers
  -Uninstalling the root USB controller and restart the computer
  -Finally to format my laptop and clean reinstall.

  -3 ports still does not work and I do not know how to solve them.

  I bought an of 2 TB external HARD drive and its driver is installed but not recognized by the last working USB port. I really need to fix the other 3. Could you help me?

  Wait a moment have you tested all 3 USB ports only for external 2 TB HDD?
  How USB ports do not work if you connect a USB mouse or a USB flash memory stick?

  Page plug Toshiba says that this laptop supports 3 2.0 USB ports: 1 left, 2 right
  The one on the left is a port eSATA/USB 2.0 supporting sleep and fresh.

• BT does not work on Satellite A660-13D

  Hello

  I have a Toshiba Satellite A660-13D, and since a few days, Bluetooth does not work.
  In device manager it tells me everything is executed, but BT does not open.
  Can someone help me with this?

  Message was edited: assignment has been translated

  Hello

  It is not easy to say what the problem is here. What you need to do is to activate the BT module correctly and software BT must start properly.
  Are you using the original operating system that you got with your laptop satellite? BT Stack (software) is installed on your machine?

• Switch signals and Wireless does not work on Satellite A660

  I have laptop Satellite A660 17 M AND I am facing a PROBLEM THAT IS THE WIRELESS DO SWITCH NOT RUN AND did not SWITCH THE WIRELESS ADAPTER ON or OFF
  AND ALSO ON THE TOP OF THE KEYBOARD FUNCTION BUTTONS DOES NOT WORK

  AFAIK, the utility Vap and flashcard support are responsible for these functions. You can try to download and install them

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Note, first you must install the utility of vap and restart the support belt utility and Visual support cards, then

• Windows 7 Home Premium OEM upgrade does not not after RAM upgraded FRO 1 GB to 4 GB

  New installation Windows 7 Home Premium 64 bit OEM worked the 1st time on workstation Dell Precision 380 (Pentium 4, 3.0GH, 1 GB RAM, Windows XP), so I registered with Microsoft.  PC worked too slowly, so I upgraded the RAM from 1 GB to 4 GB.  PC will not start now.  Nothing on the website of dell, or the PC manual led me to believe that there could be a problem.

  After I had already performed several tests, PC manufacturer said to install Windows 7 AFTER upgrading the RAM.  However, as the installation before the upgrade of RAM and joined already, can I now reinstall the OS without affecting the OEM license.

  You can reinstall Windows OEM on the same computer. Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  If you have trouble activating Windows 7 you can call Microsoft to activate it by following these steps:
  1. with the operation of Windows, click Start, then in the search box type: slui.exe 4
  2. press enter on your keyboard
  3. Select your country.
  4. Select the telephone activation option, then dial the given number and hold for a real person.

  For more details: http://www.sevenforums.com/tutorials/18715-activate-windows-7-phone.html

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses