After reloading, I installed a lot of updates from my Update Manager said I didn't need

Similar Questions

• I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried re-installing 12 items three times in case there was something missing, but this has not solved the problem and save the enemy

  I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried to reinstall 12 items three times where it was missing something, but this has not solved the problem and enemy Save Web feature is always gray on. How can I get this feature too much work. I contacted the home and they have happened to you. I have 20 minutes to make a customers web work and if I don't work (about £500). Please advise/help.

  You are on the Expert tab in the editor?

• If I don't use that works I need to install Office are there updates to the common files, I need

  From the Internet, I received several updates of Office files with 'security update' in the name of the file.  I don't have room to keep loading these updates, if I don't need them for other programs to work properly

  Hi nancymosley,

  Works updates appear sometimes as Office updates.   If you do not have Office installed, then the automatic update feature should not offer updates for Office - but if you have installed works, it will offer to those that apply to the works.  If you wish, you can learn more about the update before installing it (and it should tell you whether it applies to works or office and what it does); However, if they apply to the works and updates of security you really have to install them to your system's security.  If this is the case and you have doubts about a particular update, after the name and the number here and we'll see if we can help determine you if it is necessary for the work.

  If you have not installed Office but simply do not use it, then you will receive updates for Office as well as works.  If you do not have an office, to avoid this problem I suggest you uninstall Office (all versions you have installed) and who can fix the problem (except as noted above).  If you want to have something like office works also available "in case", then after you have uninstalled Office, ask the free OpenOffice www.openoffice.org and you will be covered and will not get not the Microsoft updates specifically for the office.  This release also lots of space on your disk space seems to be a matter of concern.

  Although it is extremely unlikely for a security issue to occur through office if you are not using Office and it is just installed, it is remotely possible (but very, very unlikely-, I'm almost tempted to say it wouldn't happen).  But if you never use it, then you can cause problems without these updates installed.  If really, you do not want to install the updates and want to stay safe, and are certain that you do not use Office (if you decide to do, then you will need to install all updates before you do anyway to avoid security problems and other), then I highly recommend that uninstall you it simply.  I guess you have discs re - install if you ever decide that you need.  If not, then you can always still use (install if you don't have it already) the free OpenOffice which covers most of the common programs of office (with the exception of Outlook).

  I hope this helps.

  Good luck!

• After you have installed the KB2707511 and updates KB2724197, error in execution of NTVDM.exe.

  Original title: problem with KB2707511 and KB2724197 updates.

  When you enter a DOS program I get a failure of execution of NTVDM.exe. Remove these updates restores normal operation. Anyone know if there are risks in doing this?

  Hi LeRoy,

  If I understand correctly you will receive an error by, NTVDM.exe running, after having installed the updates KB2707511 and KB KB2724197. However once you uninstall the updates, the problem is resolved, is that correct?
  I apologize for the inconvenience, please note that it is a known problem and Microsoft released a supported fix to help solve the problem.
  Please follow the links below to help troubleshoot-made the question.

  I suggest you reinstall the security updates that you uninstalled and then run the fix as suggested to solve the problem.

  KB2707511 and KB2724197

  MS12-042: Description of the update of security for Windows XP and Windows Server 2003: 12 June 2012
  http://support.Microsoft.com/kb/2707511

  According to the section more information under, known issues with this security update.
  

  
  

  The hotfix update is available,

  "NTVDM. EXE has encountered a problem and needs to close"error message when you use 16-bit applications in Windows XP
  http://support.Microsoft.com/kb/2732488

  Once you run the hotfix you can continue to install the rest updates normally.

  Please let me know if the problem has been resolved, or if you need additional help on the issue.

  I hope this helps.

• After you have installed the latest Windows updates, Lenovo T60 laptop running Vista takes 30 minutes to start

  I have Vista Home Premium installed on a Lenovo T60 laptop. The machine is
  3-4 years.

  Although the system has never been quick to start, after the latest Microsoft
  update has been downloaded and installed, it now takes about half an hour to start
  the system of cold starts and 20 minutes from the sleep position.
  It also takes a long extra time to get the Explorer running

  What happened during the update may cause this extra on drag
  performance? How can I change?

  I tried the system restore, but it would allow me to go back only to the point
  When the MS Update has been installed.

  Thank you.

  HR Sirois

  Is your system error free?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• After you have installed the latest Windows updates, my Bluetooth stopped working

  I installed the last set of updates to the window and it caused my Bluetooth to stop working.  Reinstalled drivers from the dell website and it still does not work. Fact a restore point and devices have started working again. Updates were the only changes. No other programs or updates installed.
  What updates do interfere.

  Dell E6530, Windows 7 64-bit, Intel core i5, office 10

  Original title: bluetooth

  Are you set for Important updates only (which is recommended)?  If not, was an updated device driver?  It is best not to let Windows Update process device drivers.
  If you cannot reduce it any other way, you can try to install the updates again one at a time.  I have not heard about recent blue tooth switn of the problems Windows updates recently.

• Cannot install Windows in bulk updates

  After a major update (back to top), my computer will only install updates MS 131and I know there are more than 100 more, they have obviously downloaded but have NOT installed. For updates they show has failed, and in the updates installed, they are nowhere to be found. Does this mean "that they have been downloaded, but NOT installed?"  Because I continue to check the updates because I know they are NOT installed and it telling me there is no. To download more than 100 updates one is ridiculous, if it can still be done. After the update it downloaded 1.5 GB of MS updates and the other half has failed. I don't have a choice on my date of restoration, a mouse driver crashed, so the update was important. And the next day he downloaded more than 100. "Should I download these one? If Yes, I switch to Apple.

  Original title: amount of updates

  Hello

  I've seen a number of messages about this problem, so I spent the evening reload an image of two year, perform a new installation of Win 8 who had never had Windows updates...

  For the most part just out of curiosity I guess... and the fact that you mentioned 200 + updates that seemed much too much for me.

  There were 109 updates for my machine. After installation of these groups, I checked once again more updates to Windows, and there is more than 18... A couple less than your total actually. And after checking again once there is no more...

  Your total of 131 is probably correct... I think that you have a gap in your numbers it's because a lot of the first failed and redownloaded again.

  If I go on my updates installed page, it lists 137, even if I downloaded only 127...

  This is because some updates are 'Cumulative' who have more than an update of the package.

  I don't know if I mentioned this in another thread or not, but don't try to do all the updates at the same time... It SHOULD work, but according to the actual updates, they can actually interfere with each other.

  Especially if the .net Framework updates are included. .NET 3.5 in particular. This issue has been much come on the forum, and I'm little tired of repeatedly typing, so I wrote a few notes...

  This is just my opinion, for what it's worth, it's here...

  I just did a test installation 109 updates Windows in groups. All groups have continued the installation process even if they were supposed to be finished, and showed the RESTART...

  You must run the Task Manager to see this.

  I did thirteen .net Framework 3.5.1 updates totaled 206 MB. At least 20 minutes after the RESTART appeared several process continued to run.

  Because I have an application that displays all internet activity, I have seen that Windows Installer would go several times, and when it ran, it would trigger a download of a certain type.

  Two other processes that are running are Windows Module Installer and Windows Module Installer Worker.

  In Win 7, they are called "mscorsvrs" and after you have installed a .net Framework update there are sometimes up to three who take turns running. The best I can describe their function, they're afflicted a compiler.

  Even if the installation is supposed to be completed according to Windows Update, it is not. Not until the end of the process...

  This is the source of many problems with the updates of Windows not... Over the years, I saw countless times in which an update failed after that these processes started to run... To the beautiful environment of the rest updates.

  It's the sequence, I used to install updates 109 @ 1.22 GB on a computer where Windows Update had never been performed...

  Group #1... @ 128 MB's malicious software removal tool and Windows Defender... Then restart

  Group #2... Graphics, internet explore ActiveX

  (Updates of seven first in the list before the .net start) 7 @ 188 MB...  Then restart

  Group #3... .NET framework 3.5.1...  13 @ 105 MB...  It took about 20 minutes for the CPU go to zero before rebooting, as mentioned above...

  Group #4...  .NET framework 4.5...   11 @ 162 MB...   It took about 45 seconds for the CPU to zero before the reboot even if reboot was not required.

  Group #5...  Updates to security...   45 @ 105 MB...     Once again, reboot only after zero CPU

  Group #6...  Important updates...  30 @ 419 MB...     Once again, reboot only after zero CPU

  After installing the first 109, I checked for new updates, and 18 were found @ 579 mb. None were .net Framework... All were successful.

  I actually did this process twice to check it again and with no failure... He managed both times.

  BTW... I have 1.01 GB of updates of Windows to be 'cleaned '... This does mean that they have failed. What is cleaned is the old files that have been replaced and the left on the packages that are no longer needed.

  Kinda like your TEMP folder where a large number of programs store the installation files... After a week, disk cleanup will allow you to remove...

• Re: Satellite L650-11F, DVD drive disappeared Windows 7 after that BIOS installed

  Hello

  I would like to ask for help about this problem:

  Today one of the programs from TOSHIBA, that came with my laptop (L650-11F), warned me about an update of the BIOS (v1.80) after download and install my DVD drive disappeared from Win7 and it has a continuous yellow light on it. It does not even open when I press the eject button.

  I have however maybe install the old version 1.60 back would help, but TOSHIBA does not keep older drivers version apparently.

  Any help would be greatly appreciated.

  Hello!

  Restart your computer. During the startup, at the beginning, press the F2 key to enter the BIOS Setup. In the configuration, press F10 to restore all the default BIOS settings. Save the changes and exit.

  Post here if your problem solved.

  Kind regards.

• VMWare Update Manager Server does not work after changing name of host/IP

  I have Virtual Center 2.5 update 4 and Manager Update on two separate servers.

  I had to rename and change the IP of the Server Manager to update, and now the Server Update Manager does not work.

  Here are two mistakes that I get, when you try to activate the plugin Update Manager:

  "The server took too long to respond" or "VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  That's what I did to change the host name:

  -J' uninstalled virtual UpdateManager 1.0 Clients Center customer.

  -I stopped the Service VMware Update Manager on the update server

  -J' I renamed the update server changed its IP address and the host name and then rebooted the server (without starting the VMware Update Manager Service)

  -J' changed the value of the fields

  dbo. VPX_EXT_CLIENT. URL

  dbo. VPX_EXT_SERVER.UR

  -in the vCenter (on the vCenter server) database reflecting the new name of the server (the new hostnameis to pings to the vCenter server)

  -J' restarted the vCenter Server

  -J' started the Service VMware Update Manager on the update server

  -J' installed the client plugin update manager Virtual Infrastructure client

  -J' have TRIED to activate the plugin, but I got a warning about an untrusted certificate (I guess it happened also when I installed the client for the first time, and everything worked) and then I got two errors:

  sometimes "the server has taken too much time to react" and a few other times "the VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  I think that there are a few other references to the host name of the Update Manager, which I have not changed, on the vCenter server or Manager Update server...

  Does anyone have an idea what do I do?

  Thank you in advance.

  I would try just reinstalling the update on existing installation manager.  Do not overwrite the database in the process so that you shouldn't really lose anything.  Not the plugin, but since the Update Manager vCenter installation media.

  Give that a try and let us know how it goes.

• Get the message of sufficient permissions to retrieve the data when I try to access Update Manager vCenter 5.5

  I've recently upgraded to VMware 5.5 and I'm having a problem with the Update Manager for where it says I don't have permissions to use it.  The plugin installs fine without errors.  I myself install as administrator, but it still doesn't let me use it.  I am using vCenter to manage my guests.  Any suggestions?  Thank you!

  Ty

  To resolve this problem, update manager must be registered for the vCenter Server. This can be done by reinstalling Update Manager, but it can also be done without having to re - install.

  Step 1.

  Remove vCenter update manager plugin by following VMware KB: suppression of the unwanted plugins to vCenter Server

  Step 2.

  To connect to the server on which the Update Manager is installed

  Open the Update Manager utility that is located in your Update Manager installation directory: VMwareUpdateManagerUtility.exe (located by default in C:\Program Files (x 86) \VMware\Infrastructure\Update Manager\)

  Select Save again with vCenter Server

  Enter your credentials to the vCenter server and select apply

  Once the operation is completed successfully, you are prompted to restart the Update Manager service.

• VMware Update Manager

  Hi all

  I need to ask questions about VMware update manager, where I can download the plugin for it.

  I can't find this plugin.

  Thank you

  concerning

  Yousif

  Hope that you have installed the server vsphere Update Manager correctly.

  If so, den you must update your .net framework Microsoft.NET Framework 3.5 SP1 or higher version.

  Installation of Update Manager VMware vSphere 5.1 guidelines are here. hope, it will help you.

  Troubleshooting:VMware KB: troubleshooting when you cannot activate or download the vCenter Update Manager plugin

• vCenter Update Manager IP address

  Hi people,

  Recently, we had a controller failure on our HP DL360 G5 server and operating system does not start as the disks are not available. We managed to install vCenter Server 5.U 3 quickly on a nearby spare server and the existing DB point. The new server has preserved the old IP address of the server that we do not want to bring intellectual property changes affecting our client connectivity.

  I reinstalled Update Manager from scratch and get option details vCenter IP and connect and everything seems normal, except that when I installed the plugin and the configuration of the Access tab, the specified IP address is old IP of the spare server had and don't watch not the IP that I expect. To implement the details

  VC1 - 192.168.170.101

  VC1 - DR - 192.168.170.102

  VC1 crashed and we raised quickly VC1 - DR, changed the IP 192.168.170.101 and installed vCenter Server. Update Manager for some reason any shows me 192.168.170.102 where I guess que.101.

  I followed the instructions on 101322 KB and extension.xml right ip (. 101) and may not know where that IP address is stored. Enjoy a counselor who could help me solve this problem.

  I managed to find the cause of this problem.

  There was a static host to vCenter DR & old IP entry. Once removed, reinstalled VUM and happy now.

• After win7sp1 clean install on a new hard drive, Windows Update runs forever - have tried MANY fixes

  April 2, 2016

  For several days, I have reproduced this problem by starting with a W7Sp1 drive and also start with a considerably older drive of W7.  The old installation of W7 is going very well, first run of WUpdate receives a few fixes, apply and restart.  Rerun WUpdate and she finds Sp1.  Installation of Sp1.  Rerun Wupdate and it says to upgrade to a new Wupdate.

  After the SP1 update and the new windows update, this system offers the same WUpdate symptoms as if from the W7Sp1 disk.  Immediately after the installation of the drive, run the wupdate.  He said: it must be updated to a new Wupdate.

  (PS in each Installer Win7, I authenticated the product key and activated windows.)

  After that, Windows Update never runs you want fixed.  (Left running 10 hours overnight).

  (NO OTHER programs or anything like that is installed after installing Win7 and starting with Windows Update problems).

  =============================================================

  I found 2 programs: FixitAllUp.

  http://support.microsoft.com/kb/971058 - downloading "MicrosoftFixit.wu.MATSKB.Run". (Chasing a "minimal boot"). The last time I have raced, he said if found 2 problems, but only fixed a.  I hit the button Details where he says that he finds the same 2 problems and fixed them BOTH.  It corrects "Missing or damaged registration Service" he said: he can't solve 'Installation problems of the recent updates' - but when you hit details it button show both under "green checkmark" FIXED.  (I also tried to run this several times, and he always finds and he said exactly the same thing, as did the first round).

  Also have run "WindowsUpdateDiagnostic" downloaded from the microsoft site.  It's the same notes 2 problems and fixed one or both depending on if you are looking the summary or detail.

  I read many many cases of a problem that dates back to 2011 and with various assumptions for this problem.

  AND YET, Windows Update checks the updates for EVER and EVER.

  Help

  There is a solution and it works very well...

  Windows Update problem (new)

  The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

  I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

  NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

  1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
  2. Start and end the re - install Windows 7 SP1
  3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.  The system should NOT have access to the Internet when it starts.
  4. Install KB3083710 and reboot manually.
  5. Install KB3102810 and reboot manually.
  6. Restore the Internet connection, and run Windows Update as usual.
  7. After a few minutes, you should have a lot of updates to download and install.

  Thanks to Ken Morely

• Win 7 Pro 64 install, after good connection install & internet Microsoft Update hangs forever

  A failed hdd on HP 6515 b required new hdd & install Win 7 Pro 64. After the proper installation & connection internet Microsoft Update hangs forever. Otherwise the computer works fine. We need .net updated for special application.

  Unfortunately, this happens to a lot of people lately.

  Windows Update problem (new)

  The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

  I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

  NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

  1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
  2. Start and end the re - install Windows 7 SP1
  3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.
  4. Install KB3083710 and reboot manually.
  5. Install KB3102810 and reboot manually.
  6. Restore the Internet connection, and run Windows Update as usual.
  7. After a few minutes, you should have a lot of updates to download and install.

  Thanks to Ken Morely

  Note: When you search for the 64-bit version of these KB specify 64-bit.  The 32-bit versions do not say what version they are.

• iPhone 4S.  Stuck on request to post a link to iTunes.  Has started after installing the recent software update.  Tried to turn but the iTunes link keeps coming.

  iPhone 4S.

  Stuck on request to post a link to iTunes.

  Has started after installing the recent software update.

  Tried to turn but the iTunes link keeps coming.

  You can not connect the phone to iTunes as requested?