Get the message of sufficient permissions to retrieve the data when I try to access Update Manager vCenter 5.5

Similar Questions

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• internet access - I always get 'pending on the cache' when you try to access the Internet

  Why do I always get 'pending on the cache' when you try to access the internet

  Hi reneamayo,

  1 Windows operating system you are using?

  2. what browser do you use?

  3. If you are using Internet explorer, what version of IE are you using?

  4. When did you start to question?

  If you use IE, then you can try to run the Fixit mentioned in the link below and check:

  Improve performance and security in Internet Explorer

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  You can also check out the following link and try the steps:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• I get the following when you try to run programs such as Nero "this program requires the file AdvrCntr6.dll, which is not on this system."

  I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."

  Please can you help me?

  Original title: AdvrCntr6.dll

  Hello.

  There is a guide for fixing here:

  http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm

• I tried to update my windows Explorer, but I get a message saying "Service Pack is not supported". When I try the link to get an update, it fails.

  My e-mail link has a s aying of message that the system is no longer supported with a link to get an update. When I try the link, I get a message saying "Service Pack is not supported" with a link to get an update. When I try the link, it fails.

  Hello

  1 did you change on your computer before this problem?

  2. update you are trying to install?

  3 are. what email link you referring?

  4. you receive an error message?

  Follow the suggestions and see if it helps.

  Method 1

  Run the system update readiness tool, and then check.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  Method 2

  You can reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• I get a message that says: "this connection is not approved" whenever I try to access ANY Web site

  I looked through previous questions and remove any software suspicious (it was not really, just a Bing bar). I deleted firefox and reloaded it. I bought Norton Antivirus and ran a scan - nothing. Date and time on my computer are correct. Explorer works very well. Help! I prefer firefox, but I can't access ANY Web site. I get this message every time.

  I've been down all the instructions on the Firefox support forum, and nothing has worked. The question may not be the Web site certificate, because it happens to EVERY SINGLE website I try to access. Nevertheless, I have add an exception for Facebook according to the instructions. That caused a strange page, not formatted to come. Since, I have read that to make an exception is dangerous because it can cause MORE unwanted malware to infect the computer.

  However, I did figure it out on my own so maybe this will help those who are facing this problem in the future: after reading the past messages from those who have experienced the same thing, I realized that, in all cases, the solution was to remove some kind of unwanted software (malware). I'm very careful NOT to download the software and I noticed that another victim of this says the same thing, so it's sneaky. I even bought new software (Norton) antivirus, performed a scan and the problem has not been found.

  I went to programs "to uninstall programs," sorted by date and anything that looked suspicious that was recently removed. I had something with the word "rocket" in it. It looked like a game. There is also another program that I removed (don't remember the name of it now). Removing those does not solve the problem, so I returned through all programs on my list and removed something that said "toolbar" on this topic, even if it was reliable (I had a bing and google toolbar). That doesn't seem to work either so I sort the programs by date again and I noticed that the software "rocket" was ALWAYS THERE.

  I have a click with the right on it and then click on 'uninstall' button again. It takes unusually LONG for this program uninstall AND nothing appears on the screen. The computer has just sort of is there and does nothing. I left and when I came back (about an hour later) the program had disappeared from the list.

  Firefox now works. I no longer receive this message, but here's the deal: I'm not 100% sure what program was the problem. It was this software of rocket or one of the toolbars. Nevertheless, the answer always seems to be some kind of unwanted malware, so I recommend that any victim of this problem try to uninstall the suspicious programs initially. And this means that ALL suspicious programs are RECENT, regardless of if they resemble games or antivirus or another. If it is new and you do not download it, uninstall it.

• Get the error when you try to write to a file using java script in my Metro app

  I'm discovering a problem in my App Metro and thought that I will create a file to copy all log messages in ther... I tried the following

  var LogFile = "LogFile.txt";

  () Windows.Storage.DownloadsFolder.createFileAsync("LogFile.txt").done

  {function (file)

  LogFile = file;

  });

  Windows.Storage.FileIO.appendLinesAsync (log file, "Test") .done ();<-- line="">

  but then, I get the following error:

  Unhandled exception, line 26, column 5 in ms-appx://windowsmultimediaperformanceapplication/js/default.js

  0x800a000d - JavaScript runtime error: Type mismatch

  It creates the file correctly, but it fails to write to it. Any help will be appreciated. I looked at the code example provided and talked about when writing this.

  Hey Kajal,

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en-us/winappswithhtml5/threads

• Error message 'invalid base64 in continuous response data' when you try to access the mail server

  Under Thunderbird 16.0.2 Mac running OS 10.5.8 that worked perfectly for 6 years. Today I suddenly can't connect to the mail server Westnet (Western Australia). Automated or manual sending my password Gets the response "the password sending has failed. "Mail server mail.westnet.com.au replied: data not valid base64 in continuous response.

  I always have access to the web and can access my email via the web portal of Westnet or using the Mail from Mac client. Using Thunderbird but I can not connect.

  This sounds like the server think your already logged in. Try to turn off the machine for 10-15 minutes and have a cup of tea. This should be long enough to force a timeout if there is something hung up at the end of westnet and try again.

• Get the error when you try to connect to the application of HFM of FDM (like Targe)

  Hello
  
  can someone help me when I open FDM and click metadata-> order pictures... and try to get focused on that time period, it generates an error "unable to authenticate the specified user %0. »...
  
  Log file of this...
  
  * Start the journal entry for the Runtime Error FDM [2008-11-07-06: 41:05] *.
  -------------------------------------------------------------
  ERROR:
  Code...-2147220966
  Description... Could not authenticate the specified user. %0
  Error reference number: {06CFB6AF-0B83-40DC-8E32-EBD1275318D8}
  NUM: 0x8004021a; Type: 0. DTime: 2008-07-11 06:41:05; SVR: DEV-HFM-APPS1; File: CHsxClient.cpp; Online: 2272; Worm: 9.3.1.0.1502;
  Online: 391
  Process... clsBlockProcessor.ActConnect
  The component... upsWBlockProcessorDM
  Version...................................... 931
  Thread....................................... 4752
  
  IDENTIFICATION:
  User... osadashiv
  Name of the computer... DEV-HFM-APPS1
  App name... fdmapps
  Client App................................... WebClient
  
  CONNECTION:
  Provider..................................... SQLOLEDB
  Database server... 172.20.160.185
  Name of the database... fdmapps
  Trust connect... Fake
  Connect status... Open connection
  
  GLOBALS:
  Location..................................... Sample
  Location ID... 748
  Location Seg... 2
  Category..................................... WLCat
  ID of the category... 12
  Period....................................... Oct - 2008
  Period ID.................................... 2008-10-31
  POV Local.................................... Fake
  Language..................................... 1033
  User Level................................... 1
  All Partitions... True
  Is Auditor................................... Fake
  
  
  I put the machine, global session logon information profile, etc... and already download 2 adapters... but still getting the same error...
  
  Please help me...
  Thanks in advance...

  Hello

  It seems that something is wrong when FDM tries to connect to HFM.

  You need to understand:
  -To connect with FDM which user are you using
  -Do you use unified or comprehensive as your method of connection (settings of integration)
  -Have you attended a user in the profile of the machine?
  -You entered a domain anywhere?

  The user you are using must have the access rights to HFM. Test it directly in the client.

  Kind regards

  Marc

• Unable to choose the Date when you try to schedule

  Hello
  I created a report with date setting where I can choose a date before to display the report, but ehrn I am planning the report that I am not able to select the date but I not see the parameter here but doen't calendar pop up... any suggestions please...

  It is an Oracle BI publisher Bug in 10.1.3.4.1... this should work in Firefox... I'm wrong? His problem in IE 7.0

• Get the error when you try to burn Windows 7 pro disc: 0 x 8004005

  I downloaded windows 7 Professional (download 2 GB) and when I click on "launch" said to insert the DVD to burn to the disc. I put the disc in, it gets all the way to the end and then gives me this error code: 0 x 8004005 so I can't complete installation. what I'm doing.

  Download Windows 7 proper. ISO file

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  = Upgrade to Vista =.

  First run the Windows 7 Compatibility Checker
  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  Windows 7 Upgrade Advisor
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
  http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  clean startup in Windows Vista and try the upgrade to Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Disable or uninstall your anti-virus software and firewall temporarily.

  How to upgrade from Vista to Windows 7 Home Premium: http://www.howtogeek.com/howto/6892/how-to-perform-an-upgrade-from-vista-to-windows-7/

  Upgrade Windows Vista to Windows 7 (custom installation)
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

  Also: Windows XP to Windows 7 Migration Guide
  http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx

  = XP update =.

  Upgrade Windows XP to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  How to move from XP to Windows 7 in 4 easy steps
  http://www.MakeUseOf.com/tag/how-to-upgrade-from-XP-to-Windows-7-in-4-easy-steps/

  ===============  Keyless Install  ===============================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Get the error when you try to rebuild StoreFrontModule.jpr

  Hi friends,
  
  New IAM came into the world of the ADF. IAM folllowing steps to create a schema of DOM from the link http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html
  
  The scheme was built successfully, iam now get many erros when the StoreFrontModule.jpr has been rebuilt.
  
  C:\FODSchema\StoreFrontModule\StoreFrontService\src\oracle\fodemo\storefront\entities\WarehouseEOImpl.Java
  Error (3,18): package oracle.jbo does not exist
  Error (4.18): package oracle.jbo does not exist
  Error (5,18): package oracle.jbo does not exist
  Error (6.25): package oracle.jbo.domain does not exist
  Error (7.25): package oracle.jbo.domain does not exist
  Error (8.25): package oracle.jbo.server does not exist
  Error (9.25): package oracle.jbo.server does not exist
  Error (10.25): package oracle.jbo.server does not exist
  Error (11.25): package oracle.jbo.server does not exist
  Error (17,38): cannot find symbol
  Error (29,20): could not find the class EntityDefImpl
  Error (38,32): could not find the class EntityDefImpl
  Error (104,12): unable to find the class Date
  Error (125,12): unable to find the class Date
  Error (143,44): cannot find class AttributeDefImpl
  Error (179,42): cannot find class AttributeDefImpl
  Error (219,12): cannot find class RowIterator
  Error (226,12): cannot find class RowIterator
  Error (234,19): unable to find the Key class
  Error (242,27): cannot find class AttributeList
  C:\FODSchema\StoreFrontModule\StoreFrontService\src\oracle\fodemo\storefront\entities\AddressEOImpl.Java
  Error (3,18): package oracle.jbo does not exist
  Error (4.18): package oracle.jbo does not exist
  Error (5,18): package oracle.jbo does not exist
  Error (6,18): package oracle.jbo does not exist
  Error (7.25): package oracle.jbo.domain does not exist
  Error (8.25): package oracle.jbo.domain does not exist
  Error (9.25): package oracle.jbo.domain does not exist
  Error (10.25): package oracle.jbo.server does not exist
  Error (11.25): package oracle.jbo.server does not exist
  Error (12.25): package oracle.jbo.server does not exist
  Error (13.25): package oracle.jbo.server does not exist
  Error (19,36): cannot find symbol
  Error (21.20): could not find the class EntityDefImpl
  Error (304.32): could not find the class EntityDefImpl
  Error (314,12): unable to find the class DBSequence
  Error (321,30): unable to find the class DBSequence
  Error (454,12): unable to find the class Date
  Error (476,12): unable to find the class Date
  Error (496,44): cannot find class AttributeDefImpl
  Error (507,29): unable to find the class TransactionEvent
  Error (515,5): cannot find the RowSet class
  Error (539,42): cannot find class AttributeDefImpl
  Error (550,12): cannot find class RowIterator
  Error (557,12): cannot find class RowIterator
  Error (564,12): cannot find class RowIterator
  Error (571,12): cannot find class RowIterator
  Error (579,12): cannot find the RowSet class
  Error (589,40): unable to find the class DBSequence
  Error (589,19): unable to find the Key class
  Error (596,12): unable to find the class EntityImpl
  Error (603,34): unable to find the class EntityImpl
  Error (612,24): cannot find class AttributeList
  C:\FODSchema\StoreFrontModule\StoreFrontService\src\oracle\fodemo\storefront\store\queries\OrdersVOImpl.Java
  Error (6,18): package oracle.jbo does not exist
  Error (7,18): package oracle.jbo does not exist
  Error (8,18): package oracle.jbo does not exist
  Error (9.18): package oracle.jbo does not exist
  Error (10,18): package oracle.jbo does not exist
  Error (11.18): package oracle.jbo does not exist
  Error (12.25): package oracle.jbo.domain does not exist
  Error (13.25): package oracle.jbo.domain does not exist
  Error (14.25): package oracle.jbo.server does not exist
  Error (20,35): cannot find symbol
  Error (57.38): could not find the local class
  
  This list is long... .i was a little bit upset to see so many mistakes :(
  
  Is someone can pls tell me where he has gone wrong?
  
  IAM using Jdeveloper 11.1.2.1
  
  Concerning
  Goutham

  You must have the role of Developer Studio in order to use the ADF.

• Intalled CC but get the error when you try to install the apps?

  Any ideas? be p * ssed off now. About to cancel the subscription

  Hi Davidg9319675,

  Please let us know if you still experience the problem.

  If so, then please refer to the below links:

  • If you receive a specific error code during the installation of an application, see error download or update creative Cloud applications.
  • If this does not resolve the installation problem, you can find the Setup log that generate creative Cloud applications. For more information, see troubleshoot installation problems with the log files.

• I've just updated my CC Apps and Noah l get the following when you try to start Dreamweaver: the application failed to start correctly (0xc000007b). Click OK to close the application.  Help!

  The application was unable to start correctly (0xc000007b). Click OK to close the application.  Help!

  Please see:

  Flash.exe & Dreamweaver.exe error 0xc000007b

  How to repair (0xc000007b) error easily for all the works of Windows 7/8/8.1/10 (resolved) - YouTube

  I hope this helps.

  Concerning

  Megha Rawat

• The requested operation is not implemented by the server when you try to access the VI Client with ESX hosts

  Hello

  We have problems with the VirtualCenter (which someone else works).  I need to access some of the virtual machines and tried to connect through the VI client to all ESX hosts.  I get this error after I give him password, username, and hostname:

  The requested operation is not implemented by the server.

  I'm sure I got this race last year.

  A reflection as to why it does not work?

  Thank you!

  Hello.

  How you launch the client?  Is it a shortcut with possibly a few settings in there?  If so, try running it without parameters.

  Good luck!