After restoring 2012 R2 standard Windows backup server, the server will not turn on

Similar Questions

• Windows stops but the laptop will not turn off or to sleep.

  Hello

  I have Hp Pavilion dv6-6120us and recently I noticed that windows 7 is off but my computer stays, the hard drive fan and lighting too, if I put my computer to sleep it won't wake up I have to hold the power button / 10 seconds, and then restart the computer. I uninstalled all the programs that are not needed and also uninstalled my virus protection, I have run the disk cleaner, fix the registry and ran a virus check and malware and no problem, I also ran a check air that comes with my Hp system and found no problem. I already turned off all controllers usb, video card, sound card, network card and still no luck, also on the safe mode, the custom of the computer turns off. I also ran msconfig and disabled all the startup programs, services, and still no luck. I uninstalled all updates of windows too and still have the same problem, any help, I'll take thank you.

  Hi Yemel,

  This question could be either software or hardware partners. Start safe mode and check if you can close properly.

  Method 1:

  Step 1:

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Mode safe mode appears in the corners of your monitor to identify which Windows mode you are using.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not persist in Mode safe then the problem may be due to a third-party program/application. To determine which program or application is causing the problem, try to place the computer in a clean boot state, and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: Follow the section 'More information' to reset the computer to start as usual after a clean boot troubleshooting.

  Please refer to:

  Solve problems with sleep and the night before extended Modes (Windows 7)

  The problems of wake the computer from sleep mode

  Note: changing the BIOS settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS settings can be solved. Changes to settings are at your own risk.

  Please post with the State of the question so that we can help you.

• After that I imported my photos and videos, the videos will not play. I click on them and I get a black picture with in a valid Image. I can't find a solution. Help

  I use a sony camera.  After the up-loading photos and videos to the computer that the videos will not open and the game.  I always get a sign of invalid picture

  What is the format of the video clips?

  You may need a compatible media player.

  The following media players freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (the name of the file to download is: vlc - 2.0.1 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (The name of the file to download is: "MPC-HomeCinema 1.6.1.4235.exe")

• the user removed windows xp, now the computer will not boot

  I have deleted 1 of 3 users on XP Pro.  The program allowed me to save the contents to a folder on the desktop, I did.  I checked the desktop, all data file and pix were there. Then I rebooted.  Open my user account.  All icons were present, but empty, no program.  Go to START - programs, all programs present but empty.  Could not run any program.  I restarted again, and after the Dell startup screen, the screen is black.  Cannot start in safe mode, will not open windows.  I have an XP Reinstall disk but not a recovery disk.

  Hello

  You can follow the steps from the link and check if it helps: computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

• HP ENVY 17-j020us Quad Edition: installed SSD and Windows 7, now the laptop will not boot

  I replaced my hard drive Windows 8.1 with a PNY 240 GB SSD and Windows 7 64-bit.  Everything worked very well! Installed all the drivers, everything has worked very well!  Restarted several times, everything worked fine!  Portable stop for the night, the next morning I turn on the laptop and get this error message:

  "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

  I've traveled different repair procedures using the ERD Windows 7 without change.  I have reinstalled Windows 7 with SSD formatted as GPT drive, received the same error message:

  "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

  I have reinstalled Windows 7 SSD formatted as MBR disk withs, received the same error message:

  "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

  I removed the SSD to the laptop and placed in a desktop pc, pc works fine, no problem with the SSD.  SSD in laptop, got the same error message: "boot device not found, please install an operating system on your hard disk, hard disk 3F0".   I don't know where to go from here.

  Help please...

  Okay, I'm running.  In the System Configuration UEFI clicked 'Load HP Factory Default keys', this restored "Secure Boot" who has restored the laptop as long as you work!  Thanks for the help.

• I have windows 7 and the computer will not open in safe mode. How can I fix this?

  I tried to use the configurations of systems, but this does not solve my problem. I use the F8 key and F10 keys but it always opens in safe mode.

  I need your help

  Claudia Hanks

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  ======================================================

  Diagnostics for use in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/diagnostic-tools-to-use-in-safe-mode

  J W Stuart: http://www.pagestart.com

• I just bought a Microsoft Surface Pro with Windows 8, and the cursor will not appear at certain points in time

  I recently bought the Microsoft Surface with Windows 8 Pro is installed, and sporadically the cursor disappears.  It doesn't matter if I use internet, Outlook or any other program.  Any ideas how to fix this?

  Clues in the present?

  The mouse cursor over where the Surface Pro and drift
  http://www.surfacetablethelp.com/2013/02/surface-Pro-mouse-cursor-unresponsive-and-drift.html

• I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How can I solve th

  I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How I can solve this problem.

  Hi abgolf3,

  The question may be how the new hard drive has been formatted.  Take a look at the way in which the reader is implemented by clicking Start > Control Panel > Administrative Tools > double-click on computer management > double-click storage.  Is all the space on the disk are responsible?  If so, take a look at these two documents for your problem:

  Mark a partition as active

  Format a hard drive or partition to NTFS format

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7 - KERNELBASE.dll exception 0xe0434352

  Hello

  Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7.  I use the window of the object but the detail of the objects window arrives and immediately SQL Server stops with the error below and then opens again.  I didn't find any help with this specific error is but suspect there is a problem between SLQ Server 2012 et.NET Framework 4.  Unfortunately, I do not know what it takes in this regard.

  Thanks, Deb

  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Deb - HP
  Description:
  Name of the failing application: Ssms.exe, version: 2011.110.3000.0, time stamp: 0x5081c1cd
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83c8a
  Exception code: 0xe0434352
  Offset: 0x0000c41f
  ID of the process failed: 0x13a8
  Start time of application vulnerabilities: 0x01ce609a6d3db991
  The failing application path: C:\tempSQLWOW\110\Tools\Binn\ManagementStudio\Ssms.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 1fb1cbfb-cc8e-11e2-b436-abd2bebb3f17

  Hi Claude,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Good day!

  Answer please if you face concerns.

• my laptop will not turn on after a recent windows update

  Windows recently did an automatic update on my laptop and need to reboot to complete. However, it will not turn on at all now. I tried to run the install disc and used to attempt to repair my system and yet it is said that it is not repairable. Ive also tried to restore to a previous point, and yet, he won't do that. Help!

  Hello

  1. the updates are was?
  2. what exactly happens when you try to start the computer? You get the error message?
  3. What are the error messages that you receive when trying to run the system restore or Startup Repair?

  Step 1: Use the option last good Configuration see and check if you are able to boot to the desktop.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

  Step 2: Check if you are able to boot into safe mode and send back the same.

• HP Photosmart premium c310, Windows 7 (64 bit) series will not work afterit is turned off and then on again

  I have photosmart all-in-one c310 printer and whenever we have a power outage, the printer will not print at startup power upward. I have spend hours trying to download drivers or updates and check the printer that says it's fine and the computer that says it can't find the driver. The last 2 times I finally got running again, but I did something different every time and I don't remember what it was. I just spent 2 hours on a hamster wheel keeps back me for a download, after you download it twice, I finally understood was the SAME download (the 3rd time I was directed here) and the printer STILL does not work. I'm pulling my hair out and I'm about to throw this worthless piece of scrap metal by the window. Help!

  Are you connected wireless? If so, you will need to reconnect the printer to the network of the SCW wireless on the printer itself. When you have power, he can hit just the printer off of the network from the router and just reconnect.

• Update error configuration Windows Updates... Do not turn off your computer. This is immediately followed by the default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer.

  OT: Windows Update failure 8.

  I recently re-installed Windows 8 using an old product key once I updated my PC using Windows 7 due to failure to boot Windows Technical Preview. The installation went smoothly, but when installation is finished, he told me that I had installed updates, for the most updated security. I installed them and restarting my PC, he has said configuration Windows Updates... Do not turn off your computer. It is immediately followed by updates default Windows configuration . Restoration of the changes. Do not turn off your computer. It accomplishes this task for like 10-15 minutes and then finally starts. Once my PC starts, this cycle starts again. So far, happened 4 times.

  Could someone please fix this? I want to update to Windows 8.1, but could end up, I'm stuck with Windows 8. (Also, why download from the store disappeared? "I'm not using a RT system).

  Thank you!

  -me15prg9926

  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

• I just restored my HD Mac from a time machine backup and PS 4 will not open. I get an error code 150:30. No idea what I need to do?

  I just restored my HD Mac from a time machine backup and PS 4 will not open. I get an error code 150:30. No idea what I need to do?

  Most likely your Photoshop installation was damaged by the restoration. Re-installing Photoshop CS4. You can find the latest version that has been published here: products CS4 download

  Benjamin

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Download latest towers "connecting to the update server", will not download

  I tried to download the latest version of Firefox for the last 5 days on different internet connections. He turns and hangs on "connecting to the update server". The download will not be completed. Can you please help? Thank you.

  To install Firefox on a Mac, follow these steps:

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Delete Firefox in the Applications folder.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  If the download is interrupted, check the reasons for it: if it's a low slow connection, it would be wise to seek a faster point to connect.

  Please report back to see if this helped you!