After the conversion of server 2012 system_thread_exception_not_handled winhv.sys

Similar Questions

• Help! VM does not start successfully after the conversion of Server VMware ESXi 4.1

  Hi, I have install my first server ESXi, everything seems OK and stable. Had a few PtoV machines, but to start I thought I propose our only current VM from VMWare server on our ESXi server.

  The VMware host is Win2003/32 running VMware server 1.0.6 and the prompt is also Win2003/32. I shut down the VM, installed the stand-alone converter on the VMware host and let it do it's thing. Successfully completed and took 20 minutes.

  When I try to start the virtual machine of the ESXi server, it looks OK, but hangs on "Application Startup Scripts", possibly the login screen appears, but then I get messages from "Remote RPC server not available" when you try to open an RDP session. A local login hangs right on the application of personal settings.

  Network everything seems fine, can ping the VM, etc.

  May not work on why the virtual machine should start any differently? Any ideas, anyone please. I am new to ESXi and migrate the virtual computer, but have used VMware Server a lot in the past.

  All advice appreciated...!

  That's good news.

  Which explains, normally, you must do the VMTools upgrade, then the virtual machine hardware, so if the converter upgrades the equipment, the order is bad. Of course, it is recommended to upgrade the hardware to ver 7. So now that it works you can improve the tools and then the vHardware. It might be interesting, if you have enough resources on the ESXi host, make a clone to the virtual machine and the test on the clone in a State (disconnect vNIC) offline.

  Please allow Points if it is useful

• Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

  Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

  Hi larrys57575985,

  To change a file that you converted to Word format, you will need to download it first and then open it in Word. To download your file, sign in to your account on https://cloud.acrobat.com/files, select the file you want to download and click download at the top of the list of files. Your file will be downloaded in the download on your computer folder. In Word, you may need to click Activate the change at the top of the document.

  Best,

  Sara

• Solaris VM is not running on ESX4.0 after the conversion of VMware workstation 6.5

  I have created Solaris VM on VMware workstation 6.5, but now I want to run it on ESX 4.0. After the conversion of Solaris VM from VMware workstation in format by converter 4.0.This VMware ESX VM restarts again and again on the boot of power.

  VMware workstation is running on Intel (R) Xeon (R) CPU E5420 and ESX 4 running on the Unisys ES3220L system

  Help, please...

  How was the original virtual controller?

  If it's IDE, you will need to also change SCSI to IDE on ESX 4.0.

  André

• some omitted spaces after the conversion of x 5

  I recently converted my 5 x aid project to version 7. After the conversion, some, not all, display of words merged compiled help, but does appear like that in Design view or when previewing in the topic. Normally, it happens after a word that is bold, or a hyperlink. When I look at the html code, it seems to be formatted correctly, in the following example, only the words Option display in bold management:
  
  Design/Preview menu screen - management Option
  HTML - < span style = "' make-weight: bold;" > </span > management option menu "
  Compiled help - Option Managementmenu
  
  The only way to add space is to insert a space before the/span tag. Of course, in the case of hyperlinks, it extends the hyperlink in space. It occurs sporadically throughout the project, and it will take me forever to try to capture all these occurrences. Anyone have any ideas on how to solve this problem? It also seems to be the case sometimes when I copy and paste from Word.
  
  Thank you very much for your help - Janet

  Yes, I always had the same results after you apply two patches. However, I installed version 8, and who took care of the problem. Thanks for the idea!

• Problems of mouse after the conversion of a hard drive file virtual Microsoft Virtual Server 2005 for ESXi 3.5

  Today I used VMWare Converter 3.0.3 to convert a file evaluation VHD Windows 2003 Enterprise Edition SP2 (Virtual Server 2005) ESXi 3.5. It seems to work without error. However, I have a pending issue. In other words, based on the results of pilot of "VMware Pointing Device" in my being rooted at the bottom right of the Virtual Console of the mouse. The mouse buttons seem to work, but the mouse itself will not move. I have VMware Tools installed and that you have reinstalled them several times, just in case. If I change the mouse driver to the driver "mouse Compatible PS/2", it works, sort of. It moves around the screen and the same slides perfectly in and out of the console window, as you'd like. However, it is jerky. Hardware acceleration is maximum. The video driver and all the other features seem to work perfectly.

  I converted a Windows 2008 VHD and it worked well.

  If I do a new installation of Windows 2003, it works perfectly, mouse and all. If the problem seems to be limited to a hard drive Windows 2003 virtual conversion. I don't have a Windows 2003 machine to test if the importation which would have the same bug or not.

  A very similar discussion was due in a previous thread several years ago http://communities.vmware.com/thread/36507.

  Any help to fix this annoying bug would be appreciated.

  Thanks in advance

  Normally uninstall us the services that we believe may conflict with VMware devices (such as mouse), so that these problems do not occur. But just to be sure, it would be nice if you could 'uninstall' as suggested CONTINIUM and see if that makes a difference. An only problem here, is that you will not be able to uninstall the present of the VMware VM and you may need to uninstall this VS VM before proceeding with the conversion.

  You can also see if this helps: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1002239

  Post edited by: paragsha

• Unable to use the service Windows Server 2012 EAP - MD5

  Hello

  I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

  Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

  I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

  Can you know me how to provide the password in 2012.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• One user away from the dashboard of the range Windows Server 2012 R2 Essentials

  We migrated from SBS 2008 for Windows Server 2012 R2 Essentials range. All users and computers have successfully migrated and their list is visible in the ADUC.

  However, a user is missing from the Windows Essentials Dashboard (users in the navigation bar, tab users).

  The user can work normally: connecting to Active Directory, it can see shared folders and so on. But it is not in the list above. Because of this, it cannot be administered in the dashboard (for Windows Server Essentials).

  What can be the problem? How can get us in the list? What other information should we supply for you to find the answer?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error in the application on server 2012

  I get these errors when launching an application.

  Server 2012

  Have reinstalled the app even result.

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: LTClient.exe
  Signature of the problem 02: 105.226.5832.35807
  Signature of the problem 03: 56774d 90
  Signature of the problem 04: LTClient
  Signature of the problem 05: 105.226.5832.35807
  Signature of the problem 06: 56774d 90
  Signature of the 07:9759 problem
  Signature of the 08:32 problem
  Signature of the problem 09: System.TypeInitialization
  OS version: 6.2.9200.2.0.0.272.7
  Locale ID: 1033
  Information additional 1:5861
  More information 2: 5861822e1919d7c014bbb064c64908b2
  3 more information: 5c1f
  Additional information 4: 5c1f554df00553b422a8baa03b19335a

  Event ID 1000

  The failing application name: LTClient.exe, version: 105.226.5832.35807, time stamp: 0x56774d90
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.17366, time stamp: 0x554d16f6
  Exception code: 0xe0434352
  Offset: 0 x 00010192
  ID of the process failed: 0x1d40
  Start time of application vulnerabilities: 0x01d15d2a8dfd6352
  The failing application path: C:\Program Files (x 86) \LabTech Client\LTClient.exe
  Path of the failing module: C:\Windows\SYSTEM32\KERNELBASE.dll
  Report ID: cbcb506f-c91d-11e5-943b-00155da87700
  Faulting full name of the package:
  ID of the failed package-parent application:

  Event ID 1026

  Source .net Runtime

  Application: LTClient.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  Exception info: System.TypeInitializationException
  Battery:
  at LTClient.modMain.StartMe (System.String [])
  at LTClient.modMain.Main (System.String [])

  Any help would be welcome.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• After moving to Windows server 2012 VPN connection error

  Hello world!

  Recently, I upgraded my Windows Server 2003 SB server to a new server running Windows Server 2012.

  I started from scratch by creating a new domain, user, accounts etc.

  The new server is using the same IP address as the old server.

  Since then, I can't connect through the VPN. I have already added the role of remote access on the new server.

  When I try to connect to my Windows 7 laptop, I get this error:

  "Error 800: the remote connection does not because attempts VPN tunnels failed." The VPN server is maybe inaccessible. "If this connection tries to use an L2TP/IPsec tunnel, the security settings required for IPsec negotiation is may not configured properly."

  Any help with this is appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. We have a separate team working on the server problem, so I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

  Hope this information is useful.

• Why my RAW file is removed from the grid of the library after the Conversion to DNG?

  Hi I'm new to LR and need to understand if this is a standard behavior.

  My goal was simply to convert a native file RAW to DNG and have two files in the catalog and visible in the same library.

  I imported a native heap of RAW + JPEG files in my catalog (as separate files). I did it from the inside of LR.

  Then I selected and converted a RAW file to DNG (using library, convert to DNG, with "Delete originals after successful conversion" DESELECTED)

  Against all odds, the RAW file (.) ORF in this case) is removed from the grid view library. A new DNG file appears in the view library, as expected.

  I expect that the. File RAW ORF would remain and the new DNG would be added, that is, I see two files.

  BTW I have Off filters.

  In alarm, I looked at the folder with the Explorer (inside the LR), and (to my relief), the folder contains the RAW format. ORF, JPEG as well as the new DNG format

  Suspecting that the RAW file has been removed from my catalog - I tried to import the RAW format. ORF again.

  Import using - I can view the RAW file, but it is grayed out. And give me the message "seems to be a duplicate of another picture already in the catalog.

  Since I DESELECTED 'Delete originals after successful conversion', I expect to stay visible in the library.

  Seems I did something wrong or I'm a bad interpretation of the process. Is this a normal behavior?

  Also, how to get back the RAW file in library view now that LR tells me that it is already in the catalog?

  Lightroom works as expected.

  I do not believe there is no option to keep the original gross as the dng in the same catalog. Maybe change the name of one of them is an option to consider.

  Explain what you are trying to reach?

• Keyboard does not not after the Conversion of VMWare

  Hello

  I'm trying to run a VMware Conversion of an old laptop as a backup. I run a conversion of VMware and converted in an image of VM® file 9.

  When it is opened in VMware Player, everything works except for the keyboard entries. The only way I can tap on the screen is using either on the keyboard of the screen or connection with TeamViewer.

  Research in Manager device indicates the following error message.

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Someone has encountered this before and whether a solution?

  Thank you

  Peter Sheridan

  Update:

  I got it to work. I followed the steps described in the following Article and it worked like a charm

  No keyboard or mouse after installing the Mouseware Drivers from Logitech 9.0 on Windows 2000

  • On the registry menu, click Select computer, and then type the computer name of the computer on which no keyboard or mouse.
  • After logging in, click on Hkey_Local_Machine on the Remote_Computer_Name in the menu window , and then navigate to the following key:
    SYSTEM\CurrentControlSet\Control\Class\ {4D36E96B-E325-11CE-BFC1-08002BE10318}
  • Double-click on the UpperFilters:REG_MULTI_SZ: Lkbdflt2 kbdclass value and then remove only the Lkbdflt2 entry.
  • Navigate to the following registry location:
    SYSTEM\CurrentControlSet\Control\Class\ {4D36E96F-E325-11CE-BFC1-08002BE10318}
  • Double-click on the UpperFilters:REG_MULTI_SZ: Lmouflt2 mouclass value and then remove only the Lmouflt2 entry.
  • On the registry menu, click close.
  • On the registry menu, click exit.
  • Restart
    the computer with keyboard and mouse problems. After the computer
    restarts, the mouse and the keyboard should be functional.

• How to activate the Hyper-V Server 2012 on Fusion 5?

  Dear members of the Forum,

  I have a Mac Pro early 2008 Intel Xeon, 16 GB under Snow Leopard and VMWare Fusion 5 installed, as well as a few virtual machines running perfectly. I decided to create a virtual computer that is running Windows Server 2012. The installation went well. However, when I tried to activate the Hyper-V technology I got in trouble.

  In the Virtual Machine settings > system settings > general: I chose "Hyper-V (not supported).

  In the processor and memory, I selected 4 cores, 4 GB and in advanced: enable applications to hypervisor...

  In other/advanced: the virtualization engine preferred: Intel VT - x with EFA

  and all the possible permutations of these selections. Nothing has worked.

  Error messages:

  Hyper-V cannot be installed. The processor has no virtualization required capabilities.

  Virtualized Intel VT-x/EPT is not supported on this platform.

  Preferred mode is unavailable. Using VT - x instead. This host does not support EFA.

  All this leads me to believe that my hardware configuration does not support the operation of computers virtual hyper-v in Fusion. According to your philosophy, we can consider this to be a reality: everything is always possible. However, what drives me nuts are guys on internet blogs, everybody saying he's working on their system! I would like to hear an authoritative voice if possible, or not.

  Thanks in advance

  EP

  Hi Eric and welcome on VMware communities!

  It is purely a matter of features of the CPU.  None of the processors that apple delivered in Early 2008 Mac Pro systems supports Extended Page Tables (EPT).  According to the list of the Mac Pro systems, the processor that you have will be E5462, E5472 or X 5482, as well as relevant on the (related) Intel Web site pages show no support for EFA everymac.com.

  Without EFA, we cannot virtualize VT - x.  In other words, the guest operating system cannot see and use virtualization assisted by material, although the merger itself will be able to make use of the hardware support of the functions of virtualization host to run the virtual machine: we can use VT - x, but cannot virtualize to make it available to a nested prompt.

  Hyper-V is entirely dependent on the hardware support for virtualization (VT - x for example), then it won't work as a guest nested in your configuration.

  Companions VMwarian jmattson produced a great entry on nested VMS requirements and functional combinations here: nested VMs running

  See you soon,.

  --

  Darius

• Flashing blue/black screen on installing the VM - Windows Server 2012 RC tools

  Hello

  I have a problem with the installation of the tools from the virtual machine to a new server RC VM Workstation v8.0.2 2012 both 8.0.3: when the graphics driver is installed the machine virtual display flashes blue and black and can not be recovered.

  Reboot safe mode allows the virtual machine to start with a working screen, where to find VM tools apparently not installed. I then had success removing the VM graphics card and from the virtual machine as usual. VM tools then displays correctly installed in the virtual machine, but there is no VM card in Device Manager.

  I tried the suggestion here (http://communities.vmware.com/message/2059062#2059062) nothing works.

  Someone at - he managed a successful VM Server 2012 RC tools installation?

  See you soon,.

  Conan.

  I had this same problem when installing Server 2012 RC x 64 on my new machine simply active and virtual 3D graphics acceleration in the preferences of the VM.  This solved my problem.

• Windows 2003 fails to start after the conversion from a virtual hard disk with vSphere Standalone Converter 4.0.1

  Hello

  I've recently updated my host to vSphere 4. I've also upgraded to vSphere Converter 4.0.1. However, when I convert a Microsoft Windows 2003 virtual hard drive in vSphere, the resulting virtual machine does not start. He gets just after the BIOS screen, then turns black with only a white line in the upper left corner of the console.

  I tried the hot and cold conversions. I tried changing the different settings of default conversion. I tried to remove the source machine and recreate.

  It worked well under ESX3.5, so I wonder what I'm doing wrong on vSphere.

  Any help appreciated.

  Thank you.

  In v4 disk are in SCSI format only.

  Probably also the source was in the SCSI format... so v7 to the IDE format give you not configured in the bootloader of the disks.

  André