After the last update of windows, I now shadows behide the fonts & photos

Similar Questions

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Unable to put the bookmark bar on the page after your last update

  MONITORING INDICATES TO BOOKMARK BAR BUT IT WON'T SHOW WENT TO CUSTOMIZE BAR BOOKMARK CHECKED AND CLICK ON CUSTOMIZE AGAIN WHICH SHOULD PLACE IT UNDER THE SEARCH BAR BUT DOES NOTHING. THIS HAS HAPPENED AFTER YOUR LAST UPDATE.
  ANY IDEA?
  Thank you

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  If this does not work, maybe it's time to try refresh (called "Reset" in older versions of Firefox) which can resolve many issues by restoring Firefox as his default from factory and save your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10

  After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10 - what is a solution?

  Hi patsyf58769691,

  Acrobat 9 is not compatible with Windows 10, but give it a try error "Serial number." incorrect Acrobat 9 | CS4.

  Kind regards
  Nicos

• Last updated on Windows 7 cause "Crash Dump" on my computer.

  Last updated on Windows 7 cause "Crash Dump" on my computer. Watch journal update KB2264107 and KB2454826 will not settle. I do a system restore to get back. I tried the "auto update" three times.

  
  KB2454826 was fired shortly after its initial release, January 11, 2011. Revised (for example, fixed) versions of KB2454826 have been re-published February 8, 2011.

  NB: KB2454826 is an update Important/recommended, it's always an option, not the security update (from this edition). That being said, we now know that KB2454826 is a prerequisite for the update for IE9. As it will probably be a prerequisite update for SP1 of Win7, too, you probably don't want to hide.
  

  KB2264107 is an option, not the security update. Feel free to hide it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Last update of Windows 7

  The last update of Windows 7 is installed automatically on my pc in the last days. After the reboot, the Internet Explorer connection is blocked. A system restore is necessary to return to the operation. There must be a mistake in the last update.

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• All plug-ins and Add-ons Adobe disappeared after this last update! I want to go back!

  I have 4 reviews "Topaz" plug-ins and modules to Adobe who make my job so much easier workflow, but after this last update they disappeared. I found the Adobe OD briefly in "Extensions" and functions necessary for an update, I did, and then he disappeared! I rebooted and now "Extensions" has NOTHING in it! I want that my stuff back! How can I do this?

  CC 2014 is a completely separate version. You need get the versions updated plug-ins from Topaz.

  Mylenium

• After your last updated... I can use Roboform... This makes you don't NEED Firefox for me... WHY?

  After your last update for Firefox, I can no longer use Roboform in your browser that makes Firefox USELESS for me as a browser... WHY?

  http://www.RoboForm.com/download

  http://www.roboform.com/support/news
  

  RoboForm is now compatible with Firefox 7.0

• On my desktop XP higher Dimension, after this last update, Firefox comes without any content in the content window, it's just all white.

  Since the last update, there is no content in my content window. I can see the items in the browser and see that it works, but the content page is empty, even after it has finished loading the page of the site.

  Edit: Sorry it was the wrong answer initially.

  You can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an acceleration addon or equipment is involved here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• WiFi connection issue after the last update of Windows

  After that the last Window XP updated, I faced a problem connecting wifi internet.

  I (and others I know) get the question when trying to connect to the wifi. One of my friends has windows 7 and had the same problem. Personally, I have two laptops (Thinkpad T43 and T60), the T43 has only been affected. I did a lot of tests (tests of ipconfig, ping, etc.) and found what could be the problem.

  I found that I was not able to conect to my router. I changed my wifi to no (no wep or wpa key) security configuration. At that time, I was able to connect to the internet. I changed my wireless security to WEP key with special characters again and wasn't able to reach my router connection. However, when I changed my WEP key of only alphanumeric characters that has worked. With the WPA key, I am not able to connect to my wifi.

  My laptop is an old but a friend to me as a new brand.

  I have the feeling that there could be a conflict with some brands of wireless cards. I have an Intel Pro 2200BG in the T43 a different in the T60. In my tests, I used the same configurations as my other laptop which doesn't have any problem. I used the same radio channel and values. I would like to get the thoughts of an expert to properly solve the problem

  Thank you

  Problem fixed

  With 2 other people with the same problem (one called me an hour ago!) after the last window xp SP3 update and glancing again Ipconfig. I found that the tcp/ip seem to have been corrupted by the update. Then, I applied the following command at the command prompt: netsh int ip reset resetlog.txt , and then restart the computer.

  This time, the command ipconfig showed information that makes sense! And three laptops with windows XP pro SP3 were able to successfully connect to any Protocol (wpa, wpa2, wep).

  I conclude this post by saying that, probably one of the last update of security for windows XP corrupted the TCP/IP Protocol and we had to reset correctly to solve the problem.

• Monitor flashes after the last update of Windows

  I use a newer computer that already had Windows 7 pre-installed.  After the last update my monitor started flashing.  It didn't happen in Mode safe and I could not diagnose any systemic changes that can occur.  He also doesn't seem to be a problem with the refresh rate.

  I ended up coming back to a restore point from before the update.  The problem occurred after the following updates have been installed: KB2719857, KB2735855, KB2736233 and KB2741355.  Someone knows that could have caused the problem, and if so do I really need?

  All updates have been classified as '' Important '' that's why I didn't question them.

  However, it seems that my monitor was kaput.  It happened to be a coincidence that he begins to not just after a Windows update.

  I thank everyone good help.  I'll keep updating in mind suggestions, in case something strange happens in the future.

• Mice are not appearing after the last update of Windows 8

  After update to the last version of windows 8, my mouse does not work on my computer no more. I use a "HAMA Optical Mouse AM-5000" and a 64-bit Windows 8 operating system to my office. Before the update, everything worked very well, but a little at the time (perhaps a week?) there was a software update that began when I shut down my computer for the night and after, my mouse wouldn't just appear. Then I want to restore my computer to before the update and everything would work fine. It happened maybe 3 times in the past week. Today, however, every time that I restored it to an earlier date, the mouse still does not. I tried the following things:

  Deactivation and reactivation of the mouse
  Uninstall the drivers and search for updates
  Try different mouse (2 USB, 1 green connector)
  Using the troubleshooting in the Device Manager tool, a fine of the question
  Non of them did it no matter what and I wonder if I'm the only one to receive the problem. and what I can do about it. Trying to navigate in windows using only the keyboard becomes very annoying XD.
  Thanks for the reply of Kevin,

  In the (Control Panel > system and security > Windows Update > View Update History) all there is "you have not tried to install the updates for this computer. There "18 updated important and 5 available optional updates to install, but I think that those who might be updates that have been the cause.

  In the (Control Panel > programs > programs and features > Installed Updates) there are a bunch of installed updates. The most recent is "Word Viewer 2003 Service Pack 3 (SP3): WDVIEWSP3" which has been installed on 26/09/13 and "update for Microsoft Windows (KB2889543)" which has been installed on 25/09/13.

  I downloaded the latest drivers from the mouse on the site that you have linked and no change. By chipset are you referring to the processor (Intel i7)?

• Questions after the last update of Windows 9 June

  Anyone had problems after pc recently crossed the Windows Update June 9? After the update my XP machine sporadically connects to MSN, AOL, as well as some websites that I often go to such as Yamaha, aol.com etc don't connect, nor do they ping. When you try on a pc that did not update, they work very well. I have machines here one XP and one Vista and both having the problem. What could be the problem?

  Hi Bronxbabie,

  Go to the Windows update history and check what was the update was installed on June 9, 2009.

  If you are able to find the update,
  Then, open programs and features in Control Panel
  Uninstall the updates that have been installed on June 9, 2009.

  If this is not the case, make a System Restore.
  
  Let us know if that helps. Clement Kumar.

• Last update of Windows 7 is hidden or corrupt all the drivers of USB devices on my system.

  Automatic update of Tuesday last Windows 7 has killed the mouse USB and almost all USB storage devices that I use on the system. I tried several mouse and all report an error that it cannot find a driver now and that I should replace the unit. Microsoft mouse works fine on other computers - tried on three other machines, 2 running Windows 7 that did not update and a Vista running. All USB storage devices work on the other two machines. It seems that the last update has trashed the directory or the USB driver cache because the system can not find more.

  Tried to run the software "fix it" Microsoft with no luck. Also tried several other suggestions Microsoft forum without success.  I am a student and having papers coming due next week so need to fix this quickly.

  Hello

  (1) what is the Microsoft FIXIT you have tried to solve this problem?

  (2) who is the last (KB) update installed on your computer?

  (3) have tried to run the system restore?

  Method 1: Uninstalland reinstall the USB controller

  Use Device Manager to disable and re-enable all the USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To disable and re-enable the USB controllers, follow these steps:

  (a) click Start, type device management in the start search box and press ENTER.

  (b) expand Bus USB controllers.

  Note You need to scroll the list to find this point.

  (c) right-click the first USB controller under Bus USB controllersand then click Uninstall to remove it.

  (d) repeat step 4 for each USB controller is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  (f) check the USB device to see if it works.

  Hope this information helps.

• HP ENVY 15-k163cl: HP ENVY 15 updated to Windows 10, now unable to connect to the network

  I've recently updated to Windows 10 with my laptop (from Windows 8) and remember, Windows 8 was working fine but now that I've updated for Windows 10, I can't connect to my home network.
  
  When I turn on my laptop, it is not automatically connect to my network and when I try to connect from the network settings, I get an error "Could not connect to this network" and I have to wait at least 30 minutes before it automatically logs. After waiting that it works, but my laptop goes to sleep or goes inactive for awhile, it disconnects again and I have to wait
  
  I connected via hotspot and it worked fine, but all of my other computers laptops HP connects very well and they are 10 Windows as well. Only this laptop is upward, so I guess it's a problem with a new driver.

  Hello:

  The only suggestion I can offer would be to install the latest driver for the Intel Dual Band Wireless-AC 3160 adapter - 802.11 and see if that helps any.

  The 2nd driver on the list is W10 x 64.

  https://Downloadcenter.Intel.com/download/25513/Intel-PROSet-Wireless-software-for-Windows-10