After the loading of El Capitan, my Epson V600 scanner cannot be opened; reload the software is ineffective.

Similar Questions

• How to keep the content of persistStore after the software upgrade?

  I use persistObject to store a variable in the program, once I changed some work and update the new version of the device, I found that the historical data are passed. How to store history data after the software upgrade? my software is auto-start at the start of the unit, in order to update you have to restart the device.

  If the size of the object you store changes, and then it gets deleted.

  If you change the name of the package where you saved the object, then it will fade.

  I usually have with ropes to keep them always upgrades throughout.

• BlackBerry Z10 problems after the software upgrade

  After the software upgrade on my z10 I not receive notification for my text, whatsup and other notifications in my hub. Pls help

  I would try to reset your Hub first.

  Open the Hub and from the upper right corner, with the fingers sliding down to the center of the screen five times.

  You will see quick white screen, then a black screen with the text that the hub is set to zero.

  If after a day which not resolves your notifications, remove the twitter account of your settings > accounts, restart the BlackBerry, and add the new account.

• problems with rv042g after the software upgrade

  After the software upgrade it reboot the router on every 45 seconds

  I tried this tool from Cisco RV0xxV3_FirmwareRescueUtility_v4.0.0.7 Web site without success, the problem is there, is one way that you can get the router up and running again?

  Can I run a TFTP server and download new software, or I ther a FirmwareRescueUtility for rv042g?

  Mogens Demmark

  The first firmware comes with RV042G is 4.2.0.03, so the firmware utility rescue v4.0.0.7 would not work.

  Given that your will to power cycle automatically RV042G every 45 seconds, and the problem has not disappeared after that you did a reset to factory default, the unit needs a new firmware downloaded. Please, try the following steps.

  1. disconnect the power cable to the unit.

  2. hold the reset (using a paperclip) button, while plugging in the power cable.

  3 look at the DIAG LEDS.

  4. release the reset button when you see the DIAG led are flashing.

  5. a flashing DIAG indicates that the unit runs in start mode, and a server tftp on the device is waiting for a picture of fresh firmware to the address 192.168.1.1.

  6. set up your PC with an IP address in the subnet 192.168.1.x, e.g. 192.168.1.100 and specify as default gateway 192.168.1.1.

  7. try to ping the unit with 192.168.1.1, and you should see a response from the unit.

  8. run a program client tftp (with a command line) and push an image good firmware, for example

  TFTP-I 192.168.1.1

  If the procedure above does not resolve the problem, contact the support center for RMA.

• My iPad air2 will not charge after the software update

  My iPad air2 will load after 30 per cent since the software update. The software says that it is up-to-date (10.01). Nobody knows how to solve this problem, until Apple makes in the next update?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo

  It may take 30 seconds

  See you soon

  Brian

• Cartridge HP stops working after the software update OS x 10.6.8 2.13)

  Hello.

  Yesterday I installed the automatic update of the software for my HP C4180 printer.

  03/02/13 18:24:44installd [4749] installed "HP Printer Software Update" (2.13)

  Immediately after that, I got an error message "faulty or incompatible print cartridge"

   

  It is a HP 343 Tri official Colour cartridge that I bought just two weeks ago.

  Date and serial number 1782519082603293 ' 07/04 / 2014 Y'

   

  I have reset the printer according to the instructions on the HP website. Now the error has changed

  "Ink cartridge problem, remove and check color cartridge '.

  Please tell me how HP will replace my cartridge or refund my money.

  Hi the tsaar, I answered your other post about it on the Apple support forum. I'll message you private here to follow further.

  Thank you

  Ciara

• After the software update HP Solution Center has only 3 activities

  After update the software and drivers for my HP Photosmart Premium C309A for my operating system of Windows 10, the House HP Solution Center has only 3 activities: image Scan, scan a Document and send a fax.

  Hi @jwilliamp and welcome to the community of HP!

  The Solution Center behave differently on Windows 10, somethings such as printing of CD are no longer supported in the new OS.

  Other CD print is there anything else that you see as missing that I can help you to find a workaround for? If you try to print on CD, you will need to find a 3rd party software that allows it.

  I'm sure this isn't the answer you were hoping for, but if it has solved at least your request, please click on the I accept as Solution button below to report your post as solved.

  If there is anything else I can help you with please do not forget to post again, I'll look for an answer.

  Thank you.

• HP Photosmart D110a does not connect after the software update of the router

  I'll try a restatement of my first message:

  Two days ago I had problems with my Internet service provider modem.  This problem has been solved, but leads to a second problem still does not connect to the internet.  Then with the help of technical support D-Link, an update of the software has been downloaded to my wireless router and installed and now I can connect to the internet.

  But today, I had to use my printer/scanner for 2 1/2 year, HP Photosmart D110a, it is not connected through the above wireless router.  (The blue light on the printer blinks just).  Tech support says I'm out of warranty, so I hope someone can help me here on this forum.

  Thank you!

  Glad you got it to work, please mark it as Solution accepted so that others can search and find the answer too.

• InDesign cs3 will not save after the software update

  I have more creative CS3 on my mac and sinnce the indesign adobe updater was complete I can save is no longer my files. I tired reinstalling the package full creative suite but the software now crashes when I try to open a file, as happens with photoshop and illustrator, as well.

  any help would be great

  Assuming you have already restarted have you tried to disable the version cue, and starting with the Apple + Option + shift key applications?

• 5742e: lost 2 sides scan option for HP5742e after the software update

  HP Support Assistant told me to update the drivers and software for my 5742 all-in-in-one. After I did that the scan dialog changed (from 2014 2015 version) and I can scan is more 2-sided, the dialog box allows only the selection 1-side. It's less convenient. How can I get 2-sided scanning back please?

  Hello

  Download and use HP Scan extended below, it will be orivde 2 sides scan capabilities:

  http://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  It will be installed in all applications > HP > HP Scan extended.

  Kind regards

  Shlomi

• BT symbol is red after the software update of the BT

  My laptop updated some bluetooth drivers yesterday and the little icon in the system tray that was blue is now red, it keeps telling me that bluetooth is not lit, anyone offer help any with this please.

  Just activate BT device and the symbol changes from red to white.

  If you have old machine Win7 move WLAN switch in position ONE and use the FN key combination to activate the BT device.

  

• How can I connect my printer of hp pavilion to the internet after the software update

  I've updated my software and now can't print at all. get the message that I am not connected to the internet. How to solve this please

  It was an update automatic hp with office assistant who does not jive with my hp printer. I put hands on technical support with my printer hp (still under warranty), and she had to be completely reconfigured. their recommendation does not take any more updates hp to update automatic, since there are so many printers it throws some offset printers. If it is finally fixed and I disabled updates from hp with hp office assistant

• 2 Smartband does not connect after the software update

  Hello

  So I upgraded my Xperia Z5 yesterday and now my Smartband connects.

  I've seen some other posts on this topic and I've tried everything mentioned there, but it still does not work.

  I tried to activate my Bluetooth and NFC and turn it on again and the phone as well.

  I force arrested two apps smartband and erased their data and cache.

  It will not pick up my smartband Bluetooth that is so impossible to connect in this way.

  Smartband is fully charged and I tried to turn that off and on again as well.

  So I don't really know what else to try?

  Have you also tried to reset the tape? It contributes generally to:

  http://support.sonymobile.com/global-en/smartband2ios/Userguide/resetting/

• How can I remove icons on the desktop after the software has been uninstalled from my computer?

  I get a message "cannot find this article. This item is no longer located C:\Users\Public\Public Office. Check the location of the components and try again. »

  Hello

  the desktop icons must be removed before the programs uninstalled in vista

  This is a very common problem in vista

  try to delete mode safe

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  or reinstall the program: remove the icon - then uninstall the program

  You can try ccleaner, but do not use the register option

  http://www.Piriform.com/CCleaner

• BlackBerry Blackberry Passport ID to the configuration after the software update

  Please help

  I bought a blackberry someone passport and was able to update my blackberry ID. I did a software update and the existing software was wiped out by blackberry link. Now when I try to do a Setup for the new software my ID is rejected and asking the ID used in the configuration of peripheral origin. I have more contacts of the person who sold me.

  Kindly help this, thank you.

  This is because the previous use had BlackBerry Protect enabled on the device.

  Overview of anti-theft Protection > http://blck.by/1Ethg83

  You will need to provide specific information (see below) for BlackBerry to get the camera in your full possession.

  You will need to find the original seller.

  (DO NOT POST SUCH INFORMATION IN THESE FORUMS)

  -Your BlackBerry ID
  -Proof of purchase such as a reception
  -A copy of your wireless bill that shows your phone #.
  -A copy of your ID issued by the Government

  Thank you!