After the RAM, PC show me error "YOUR PC IS RUN INTO PROBLEM."

Similar Questions

• Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this?

  Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this? Is it a graphic file or a file from microsoft?

  Hi Jason,

  1. What is the number of brand and model of your system and graphics card?

  2 did you a recent software or hardware changes to the system?

  This error can be caused by an application, including any old games you have installed on your system.

  Because you tried to reinstall the drivers for video card, you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Can not start, after the logo window shows the screen empties.

  I tried safe mode. When pilots take care it stops a...\system32\drivers\mup.sys crashes then.

  Original title: after the logo window shows the screen turns off. I deleted the drivers and now I don't know how to reinstall if I can't see the windows or office. __

  Hi Hermmm,

  • Who were the drivers that you have deleted from your computer?
  • You have the Windows XP installation disk?

  Step 1

  You can try to boot the computer to the last good known Configuration and check if it helps to start the desktop. To boot to the desktop in Dungeon known, pressing F8 during restart last good Configuration. Once you see the startup option in the last good known Configuration and press ENTER. Check if you can access the desktop.

  You can also try to disconnect all external devices except the keyboard, mouse and monitor and check if you can boot to the desktop.

  Step 2

  If the steps above do not help, you can boot to the recovery console and try to disable the service or the device to the computer and check if it helps you to solve the problem. The links below for more information on how to boot to the recovery console and disable the service and the device in the access recovery console.

  How to install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  How to disable a Service or device that prevents Windows from starting
  http://support.Microsoft.com/kb/310602

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Satellite M200 does not start after the RAM 4 GB upgrade

  Hello

  I recently updated my RAM just to speed things up a bit as RAM is so cheap these days.
  I have a MEAC M200 T2130 Vista with 1 GB sticks (2 * 512).

  The new sticks are 2 * 2 GB Dane - elec DDR2 pc2-5300, when I put the two and restarted the hard drive light came briefly and then it is just options BIOS of Idol, no POST.

  I tried to use a single stick of 512 MB with two new sticks and they both work in a 2.5 GB configuration just not together that also this only works when the stick of 512 is in internal housing and not vice versa.

  So if someone has had a similar prob or can give me some advice that would be great, I'm not sure if the motherboard can support 4 GB?
  Thank you, Dave.

  Hello

  There are two possibilities why your M200 doesn't not start after upgrading RAM.
  First the RAM installed may be not compatible or could be faulty or the computer laptop doesn't support 4 GB of RAM.

  I put t know what M200 do you have exactly, but you can check the installed chipset and could check on the Intel page if this chipset would support 4 GB of RAM.

  Welcome them

• A lot of questions after the chkdsk in safe mode error.

  I did chkdsk in safe mode and for some reason now I can't connect to the internet, it takes 20/25 minutes at the start of my PC, cannot start applications like Itunes, microsoft word, outlook.

  I have Norton installed by comcast and it is not yet update of virus definitions more.
  Almost everything that takes very long so that it starts. If I could to restore to an earlier date, as I could without doubt it works again, but after more than four hours after the start of the restoration program, he returns with the error 0 x 80070570.
  I have tried many suggestions from many sites, but nothing helped.
  I am running Vista on a HP Pavilion m3830f. What has gone wrong? Can someone help me please?

  Hello

  You are able to start your computer in normal mode?

  Method 1:

  How to resolve performance issues during startup in Windows Vista

  http://support.Microsoft.com/kb/950684

  Method 2:

  for the problem with the system restore, I suggest you perform system restore in safe mode.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 3:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Method 4:

  I suggest you to contact Norton support and check.

  https://www-secure.Symantec.com/Norton-support/JSP/contact/contact.jsp?LG=English&CT=United+States&product=home&version=1&PVID=f-home

• EliteBook 9470 m stops after the Ram Upgrade

  Hey guys
  I bought 2 Kingston 8 GB of Ram for my HP Elitebook Folio 9470 m (Windows 8 Pro) be upgraded to 8 GB to 16 GB. According to "Memory search" of the Kingstons the RAM I bought should work with my laptop:

  Module 8 GB - DDR3 1600 MHz

  Weight: KTH - X3C / 8G

  Yes, it should work. I checked the site of Kingston and memory is specifically recommended for your model. I try every Kingston module separately with the HP module and run a comprehensive test of memtest on it.

  http://Memtest86.com/download.htm

  Create a bootable usb stick with memtest cd and run it on each module. I suspect that you got a bad stick of RAM. At least if it doesn't not Kingston is very reputable, and they will refund your money.  This is proposed by Crucial memory:

  http://www.crucial.com/search/searchresults.aspx?keywords=EliteBook%209470m

  If that's the answer you need, please click on accept as Solution so that others can find it on the road.

• The blue screen of death error your PC encountered a problem and needs to restart. and we will launch it for you

  I use a desktop computer, Dell XPS 8300, the blue screen looks like this

  " :( Your PC has encountered a problem and needs to restart. "and we will restart it for you.
  Then a blue screen that says:
  «Your pc is not properly start the automatic repair press on restart to reboot your PC, which can sometimes solve the problem.» Alternatively, you can press Advanced Options»
  NONE OF THESE WORK
  I can get the boot menu by pressing F12 at startup, NONE OF THESE OPTIONS WORK

  Help, my computer has been down for a week.

  Hello

  Thanks for posting your query to the Microsoft Community. Sorry for the delay in responding.
  Please go through the steps in this article and check if it helps.

  Resolve stop (blue screen) error in Windows 7

  Hope that the information provided has been helpful and let us know if you need more help. We will be happy to help you.

• Need Date must equal or after the date of beginning membership-error in po_requisitions_interface_all

  Hi all

  We have created an order forecast manuals for a purchase item in workbench CPSA for some qty and out.

  But, we are not able to get his requisition created in source.

  When we check the _Errors PO_Interface table, we found that it is wrong on with the error like -

  Need for a Date must be equal or after the apparent start date .

  Can someone please help me find the cause of this problem. Any help/pointer in this regard will be highly appreciated.

  Thank you

  Avinash

  Hi Abhishek,

  We have found the root cause of the problem.

  The BPA was not all count start date mentioned in its terms. So put us as BPA created and ran the data collection and the execution plan.

  After that, we could see its BPA release created without any errors.

  Thank you

  Avinash

• In the notifications area, shows an error "Intel my Wifi technology: card not found".

  I have a HP Pavilion dv6 6031-tx laptop running Windows 7 64 - bit, bought last month. I still have to use the technology wireless with this device, but have you noticed the error message ' Intel my Wifi technology: card not found "when plane on an icon in the notifcation area. First of all, I noticed this little time after the update from my computer through the program of support of HP, but it could be he leave early.

  Thanks for the follow-up, but after a bit of searching on Google, I managed to find a solution.

  In Device Manager, I have cahanged the the power management of wireless devices by unchecking the option "allow the computer to turn off this device to save power". When the computer reboots, the error message disappeared.

  Thanks anyway

• VWC plugin using sdk 5.1 is broken if running on the web client 6.0 with port 9443 - out could not connect to the Web Client vSphere. Contact your administrator to resolve this problem.

  We did a vwc with sdk 5.1 plugin, now, we want to make it work on the web client 6.0. before the race, we have changed the MANIFESTO. MF and services-config. XML responses such as the following:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  After that, we deployed our plugin on web client 6.0

  If access us using the URL with port: https:// < ipaddress >: client/vsphere-9443 /? csp, our plugin arises, our plugin function is also ok.

  If access us using the URL without port: https://< ipaddress > / vsphere client /? csp, our plugin is present, the function is broken (error occurred when flex user interface by calling the java service: "Could not connect to vSphere Web Client.) Contact your administrator to resolve this problem. »).

  Thank you very much

  Please change the CHANNEL_URL in your proxy classes to use 'amf' instead of 'amfsecure '.

  private static const CHANNEL_URI:String = "/" + YOUR_MODULE.contextPath + "/messagebroker/amf"
  

  This should solve your problem.

• After the last update, password synchronization error

  I've just updated to FF 35.0.1 for the immediately previous version. Had already updated the new synchronization and everything worked perfectly. Now on one computer, I get "sync has encountered an error during synchronization: Icorrect account name or password." Synchronize automatically retrying this action. " I check my preferences and it tells me to connect. I try to connect and I get the same error. I know my password is correct, because it works on my laptop and my camera android without error. At some point after trying to connect, I get a notification that "sync is enabled and will begin momentarily", however, I always shows as disconnected and the same error message. This is the computer on which I synchronize all the others, so it is more important that sync works here.

  I am running windows 7 SP1 with all latest updates. My last completed sync with one minute before the update to FF.

  f change your synchronization password, you see this error message on your other devices ' Sync has encountered an error when connecting: Incorrect name or password. "error message in the low error bar. You can update your password on your device by following these steps:

     * Click the menu button  and choose Options.
  

  • Select the Sync Panel.
  • Click on 'Connect ' and enter your password in the login page.
  • Click sign in to sign in Sync.

• Direct connection VMAgent: black / activity of the Client - logs show authentication error - please help

  If anyone has experience with this, I would appreciate the help.  I have tried everything I can find for three days, and it still does not.  I think I have a problem of local authentication on the Agent of the view.  The user is included in the Remote Desktop user group and the view group Agent direct connection to users.  There is no errors in the event logs, but there are errors in the logs VDM.  The suspect is the user 'WIN7B\user' unauthorized (non-local admin).  I can't find a solution to solve this error.  The firewall is disabled.

  Symptoms: Horizon View Client makes the initial connection logon sound, black screen, time-out.  User is logged on to the remote computer after failure of connection of Horizon view, then part of the logon process ends.

  Capture of logs on the Agent computer:

  2015-12 - T 11, 14: 21:16.102 - 06:00 DEBUG (04DC-0E10) < MessageFrameWorkDispatch > [MessageFrameWork] added worker MessageFrameWork, Name = PCoIPVChan-APP (3608), Description = PCoIPVChan, channel = 0000000003F0E960

  2015-12 - T 11, 14: 21:16.102 - 06:00 DEBUG (0E18-0A3C) < 2620 > [TPAutoConnect] pcoip_vchan_plugin_app_init2(): loan on the session 1

  2015-12 - T 11, 14: 21:16.102 - 06:00 DEBUG (04DC - 0 C 84) < MessageChannel ReceiveThread > [MessageFrameWork] 'WIN7B\user' unauthorized (non-local admin) user, tail = PCoIPVChan-SVR (1) tip = MESSAGE_IPC

  2015-12 - T 11, 14: 21:16.102 - 06:00 DEBUG (04DC - 0 C 84) < MessageChannel ReceiveThread > [MessageFrameWork] 'WIN7B\user' unauthorized (non-local admin) user, tail = PCoIPVChan-SVR (1) tip = MESSAGE_IPC

  2015-12 - T 11, 14: 21:16.102 - 06:00 DEBUG (04DC - 0 C 84) < MessageChannel ReceiveThread > [MessageFrameWork] 'WIN7B\user' unauthorized (non-local admin) user, tail = PCoIPVChan-SVR (1) tip = MESSAGE_IPC

  2015-12 - T 11, 14: 21:16.102 - 06:00 DEBUG (0E18 - 110 C) < VChanConnectionMonitor > [TPAutoConnect] VChanConnectionMonitor(): failed to get the ID of process PCoIP (err = IPC_ERROR)

  2015-12 - T 11, 14: 21:16.102 - 06:00 DEBUG (04DC - 0 C 84) < MessageChannel ReceiveThread > [MessageFrameWork] 'WIN7B\user' unauthorized (non-local admin) user, tail = PCoIPVChan-SVR (1) tip = MESSAGE_IPC

  What works:

  RDP by Horizon View Client and RDP Windows Client connections.

  Installed on the server:

  ESXi 6.0

  Windows 7 64 bit

  And the following VMWare products:

  

  Installed on the Client:

  Office Window 8.1

  

  What I'm trying to demonstrate:

  

  Portscan on Agent computer:

  PORT	STATE SERVICE

  135/tcp open msrpc

  139/tcp open netbios-ssn

  443/tcp open https

  445/tcp open microsoft-ds

  554/tcp open rtsp

  2869/tcp open icslap

  3389/tcp open ms-wbt-server

  4000/tcp open remoteanything

  5357/tcp open wsdapi

  9427/tcp open unknown

  10243/tcp open unknown

  22443/tcp open unknown

  32111/tcp open unknown

  MAC address: 00: 0C: 29:92:C9:CF (VMware)

  The full debug log file is attached.

  It certainly works in other environments, so it must be something to do with your specific configuration.

  I know that in the beginning, it has not been enough video RAM configured and certainly causes a PCoIP black screen.

  2015-12 - 10T 14: 29:07.819 - 06:00 INFO (1074-041 C) [wsnm_xmlapi] video driver name = VMware SVGA 3D

  2015-12 - 10T 14: 29:07.819 - 06:00 INFO (1074-041 C) [wsnm_xmlapi] Version of the video driver = 8.15.1.32

  2015-12 - 10T 14: 29:07.819 - 06:00 INFO (1074-041 C) [wsnm_xmlapi] video = 8 MB RAM

  It seems that this problem has been corrected, because later we see:

  2015-12 - 10T 14: 56:55.626 - 06:00 INFO (04DC - 09C 4) [wsnm_xmlapi] video = 128 MB RAM

  I also see that the modified host name:

  2015-12 - 10T 15: 03:27.050 - 06:00 WARN (04 B 0-0858) [wsnm_xmlapi] default SSL server certificate is not for this host name. The name may have changed.

  VADC itself automatically corrects the server SSL certificate, but maybe it's the other parts of the Agent posed problems that we see:

  2015-12 - 11T 09: 16:15.351 - 06:00 WARN (04EC-0CB4) authentication ticket error [MessageFrameWork]

  2015-12 - 11T 09: 16:15.351 - 06:00 WARN (04EC-0CB4) [MessageFrameWork] unable to accept the connection, authentication failed

  This does not refer to the authentication of the user customer Horizon (which is successful). This authentication is internal within the messaging system.

  Given previous problems with this Setup, I can only suggest you uninstall VADC and Agent, restart, and then reinstall the Agent and the VADC. Don't change video RAM or change the name of host/computer name.

  Let us know if that fixes it.

• Error of w3 Acer after the partitioning of c: drive, error, "recovery disk starting with the help of the legacy bios"

  I want to do partition in acer w3 to make second and third disc... After a partition on the c: drive, I can't start windows. It is blue screen and restart, screen, reboot, blue and continue like that.

  I have the recovery disk.  It can start on a recovery disk. but when I choose the option system restore of operating or completely restore computer to factory settings.

  "He said,"Please THIS RECOVERY DISC using LEGACY BIOS BOOT MODE "

   

  When I pressed win key + power: a required devece is not connected or is not accessible
  

  0xc0000225 error code
  

  You must use the tools of recovery on your installation media.
  

   

   

  I try to reinstall using win 8.1 flashdisk dvd or usb, but acer w3 cannot start on it / acknowledges.
  

   

  My bios setting:
  

  v1.07
  

  active F12 boot menu
  

  D2D recovery active
  

  FTPM active support
  

  start the order of priority: 1 cdrom usb 2. hard drive USB 3. Windows Boot Manager
  

   

  can anyone help?
  

   

  I can start to win 8 installation usb flashdisk

  I use rufus software to create bootable win8. in the parameter use: GPT partition for computer uefi, fat32, 16 KB

  If I repair windows, I'll let you know

• BlackBerry smartphone app world update does not work after the update of hourglass and error

  I've recently updated blackberry app world on my 8350i curve to the latest version

  and after that all I get is an hourglass and after 10 minutes, I get java.lang eception exception on error memory

  I tried to remove it from the applications menu, battery pulls and all that and I reinstall I get the same thing. is it possible to completely do a fresh install or recover the old version or restore the old version from an another bberry... help this has been driving me crazy for a while now... thanx

  Sorry for the late reply, I've been away for a few days.

  I think that your device operating system may be corrupted. You can try the following:

  1. Backup cell phone: http://www.blackberry.com/btsc/KB12487
  2. Backup 3rd party applications: http://forums.crackberry.com/f3/how-back-up-3rd-party-applications-53201/
  3. Perform a new installation of your operating system: www.blackberry.com/btsc/KB11320

  You can restore the 3rd party applications using Add/Remove program and accessing the file alx for step 2: http://www.blackberry.com/btsc/KB15172

  Try to install app world now.