After the use of helmet - no sound
Everyone knows who after the use of the helmet, when it came out it is not through the speakers of Treo 680?
I couldn't hear the phone ringing, incoming audio or ringtones playing. System sounds (beeps, etc.) seems to work. I have reinserted the helmet along with the helmet. I tried jiggling the plug and at the end of a few moments, has been able to recover the loudspeaker.
There is a small switch inside the plug on your device, sometimes when a headphone is inserted and then picked up on this switch is not back to external sound more. The resolution is simply re - insert the plug and remove a few times to get the changeover to folding and the sound should return.
Message relates to: Centro (Sprint)
Tags: HP Tablets
Similar Questions
-
After the use of Seagate BACK, I've now lost 48 GB hard drive
Hi after the use of seagate for BACK, I lost 48 GB of my hard disk, seagate response did not work?
I found it earlier.
You may try it and see what you told the utility:
157734, http://www.PCWorld.com/downloads/file/FID, 4/description.html
-
Right click menu disabled
My right click menu is missing after the use of security of Kaspersky application control settings.My right click menu is missing after the use of security of Kaspersky application control settings.
This tutorial will help?
Context menu - enable or disable
http://www.Vistax64.com/tutorials/140508-context-menu-enable-disable.html
Option One is the easiest.
-
After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems------------------------------------------------------------------------------------------
If no joy, see Toshiba Support and/or their forums:
Toshiba support and drivers
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba Support Forums
http://laptopforums.Toshiba.com/Contact Toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good. -
where are my data after the use of Dell backup and recovery
Three check marks displayed on a Dell backup and recovery, which, I suppose, finishing meant that my backup was successful (using Windows on a Dell Inspiron 8.1). Where my data is sent to after the use of Dell backup and recovery?
Click on the 02:22 mark of the video.
-
blocks of ightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015
Turning off graphics acceleration. Go to preferences-> Performance tab and uncheck the box there.
-
What to do after the use of reflow
Hello
I started using reflow to achieve a responsive design. Although I'm not sure what comes after the use of reflow. Can I get html and css and I should edit them in Adobe Code and will be my Web site?
Or will I get CSS Media Queries? Or do only CSS? Where can I get just CSS that is messy and that I need to change? How the reflow fits in my Photshop to Adobe Code workflow?
I hope you guys understand my question, if not, please tell me and ill explain more clearly.
Thank you
Mark
Hi Mark,
I totally understand what you are looking for. As of today, I have a couple of these questions that can help.
First, the initial goal is to help designers to create sensitive compositions that can help receipts communicate their vision of design and behavior tailored to developers and stakeholders. You might think that this as offering one more web friendly PSD. We offer CSS extraction in reflow means you can incorporate, during development. You can choose to use a variety of frames that we could not antisipate in code-gen, causing the code to come into conflict. Because of these challenges, we take our time to learn the best way to repair as much as possible workflow.
An alternative at the beginning was recently released by Terry Ryan to allow you to consume by reflow of the files on the media. Check out his blog here - http://blog.terrenceryan.com/reflow-cleaner/
Solve some of the challenges Terry stresses and work better product integrations is top of mind for our teams. If all goes well, we will have more information for you in the coming months.
Thanks for the post!
-
Layer merged after the use of convert to RGB to CMYK profile
Hi all
I'm converting a drawing printed in photoshop cs5 from RGB to CMYK. My layer merged after the use of convert to RGB to CMYK profile.
After this, I save the file and close it, and I didn't have a backup of this file.
Now please suggest how can I recover my all layers
I don't need that my layers back... Please help me
Finally you all say there is no way back...
because I checked flattened when I convert.
No Way Back, I'll take care of it in the future
Thank you all
-
Left speaker not working is not after the use of windows speech recognition
I use Windows 7 Professional. Yesterday, I used Windows speech recognition & after reboot my left speaker stopped working. I checked with headphones, but not sound in the left speaker. I uninstalled the audio drivers & installed back, but still no change. I'm sure that there are no hardware problem. I think I need to recreate the image on my OS. Please suggest if there are other options other than the new image of my laptop
Hi Kitenge,
The problem may occur due to the sound on your computer settings.
Check the levels of the speakers, see the following steps:
- Type in mmsys.cpl in the Windows 7 start menu search box and press ENTER.
- In the sound Properties window, double-click on the speakers (icon) option.
- Then, in the newly opened speakers properties
- Double-click speakers.
- Under playback, double-click speakers.
- Click the levels tab, and then click the Balance.
- Make sure that the left speaker volume is set properly.
If the problem persists, refer to the following suggestion.
This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones. Check out the following link and check the status of the issue.
No sound in Windows.
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
-
How to find edited a photo folder after the use of Photos
Hello, I'm new to using a Mac. I uploaded the photos to Photos and then made changes to multiple images, cropping etc... Now I can't find the image file on the hard drive after the change of the use of the Photos app, I find only the original file. I went to the finder, then the photo file and I find the file "Library.photoslibrary photos" so I right click and select "Show package content" then I click on the master file and look for the file in a folder. However, the file I find does not changes that I made, it is only the original file. I'm not sure what I am doing wrong? Thank you
What you're doing wrong is fiddling in the Photo library package, this will lead to tears. What exactly you are trying to achieve by finding the original.
-
Hard drive does not start after the use of the recovery on USB Manager
The hard drive on HP G62t - 350 CTO Notebook to my newphew failed. I could create a USB recovery in the Recovery Manager. I installed a new 120 GB SSD. The original hard drive was bigger, do not remember now but 250 or 500 GB. I know that the recover the system after the hard is replaced (Windows 7) said "to avoid problems, install a hard drive as big or bigger than the replaced hard disk", but that's a question for later.
Computer started fine of USB (in fact, is set to boot from USB if present by default). Recovery Manager starts. I choose minimum installation. He goes through the process of partitioning the SSD and copying files. Said so to remove the external media and restart, the computer will restart several times during the process, blah, blah, blah. I get out of USB and restarted, but after POST I get "no bootable media present.
If I try to reboot, leaving the USB in, it starts in USB and that we are at the beginning. I am able to confirm with a rescue disk, the SSD has an NTFS partition that had Windows files copied to it and a large amount of unallocated space. (Something like 60% / 40%).
So:
- How make bootable hard drive for, and if it was bootable, recovery processes complete?
- What is happening with the partitions? He creates the partition recovery first, and then after the start, the recovery partition installs the operating system? If so, I might have to give up this process because since I'm moving to smaller storage, I don't want to devote half of the drive to a recovery partition.
- Official recovery media help? A technician told me that he would do so, but couldn't explain to my satisfaction why the USB I created with Recovery Manager does not work, so I'm suspicious of the assertion that the media created by HP as opposed to media created by me using the own HP software would be better, and since the computer is under warranty I don't want to spend $30 + to find out.
Most of the people who have installed an SSD that was smaller than the reader of the factory were unable to use any medium recovery HP with the SSD.
As an alternative, if you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 family, by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Please note that this facility is not all customizations of HP or HP value-added that was original installed on your computer. Also note that you will need to download and install most of the pilots of the HP G62t - 350 CTO Notebook PC Drivers page.
Windows 7 SP1 can be found HERE and HERE.
Direct link to Windows 7 USB/DVD Download tool. Use this tool to create a bootable DVD or USB Flash drive from windows. ISO
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
Problem of scanning even after the use of HP print &; scan doctor
Hello
I have printer HP Deskjet 2050 J510 which gives me an error message "scanner communication cannot be established. I had visited the HP support portal & downloaded HP print & scan doctor. After you run this tool, it is said that it cannot solve the problem. It detects the first two steps of pilot (or can be) Manager & pilot agreed. But in the third stage it gets stuck to the top (win scanning can be, even after the restaring the computer). I use 32-bit windows.
It seems that HP can't valer'evne fix bugs in its own products. It's pathetic.
A real quick help will be appreciated...
Hi alb7039,
Follow the steps below to update the software to the latest version.
First step: clear temp directory
1. tap folder in the race or search programs and files of field
2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
3. proceed to step 2 below
Second step: downloaded and extracted to your system:
1 download the drivers and full software features
2. once the download is complete, double-click the file to extract the software.
3. when the installation window opens, press the Cancel button to stop the installation
4. tap folder in the race or search programs and files of field
5. Locate and open the folder starting with 7z (example: 7zS2356)
6. right click on the folder and select copy
7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
8 open the 7z, that you just copied on your desktop
9 open the Util folder
10 open the CCC folder
11 start the uninstall_L4
12. once the uninstall is complete, restart the computer
13. run disk cleanup from the tools Accessories\ system under all programs folder
14. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.
Let me know what you find?
-
The desktop icons do not respond after the use of IE
Hello
Anyone got a solution for this? When the computer is turned on I can use the icons on the desktop, no problem. However, after I used Internet Explorer from the desktop icons don't respond well the pograms can be opened from the start menu. As the recent problem I tried uninstalling some updates recently installed, without solving the problem. Using Windows Vista and IE9
After that I used Internet Explorer from the desktop icons do not respond
Does that mean exactly? For example, what do you see? For the best answer to this question, you could use ProcMon and know what modules are involved when you do what these are. ; )
However, without using ProcMon you can check with the Manager task or resource or ProcExp monitor if there is always a hidden background iexplore.exe processes running or anything related to IE which started as a result of your using IE. If so then try to kill these processes. Etc.
Related to this, you could also consider what you used IE before your symptoms occurred. This means that would understand that make your "desktop icons" and change it to something more neutral. For example, if you had clicked on was a shortcut Internet (aka the .url file) that requires a network connection, change for people who only runs locally, such as about: blank. So if you could close the window that has opened and always use the shortcut you would have refined your description of symptom to involve the network connections.
Related to that, would be your security package, for example, some are trying to act as a hidden proxy to "analyze" the HTTP traffic. Then the problem would not be IE but the hidden proxy. Etc.
You can't wait for a "fix" until you have a fully understood symptom. More details and diagnosis is necessary IMO.
---
-
After run Trojan Killer to clean up my computer after infection the installation "captured files" did not restore my system properly, namely files connected to the bar of tasks IE icons missing also no staus bar
Hello
Method 1:
I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.Method 2: Run SFC scan.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Run system restore by keeping the computer in the boot.
Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting steps, follow step 7 link to return the computer to a Normal startup mode -
I have a Sony XAV-701HD installed in my 09 Ram. I have had for a while now and still have problems even after the last update of the firmware. Since I installed the radio, the stations would change when I turn off the key and then restart the truck. Ususally a station off where I was listening. Then I noticed that when you listen to a CD, if I stop the truck, stop, and restart, I have sometimes no sound from the CD unit that change source to something else then back to CD. In addition, it seems to take an eternity for the CD start playing when I insert one, or when I start the truck every morning. Sometimes the CD start just up, other times not. Now, I've added SiurisXM to the unit, and I noticed that when I turn the key off the coast, and then back on, the device will not be playing Sirius Music until I have changing source, let the next launch of source for play, then switch back to sirius. I'm a professional installer, I know all my wiring is good, everything works. My Kenwood has worked perfectly in the same truck for 2 years before I changed to the Sony. Any ideas?
Maybe you are looking for
-
In iOS, we can add multiple accounts to: email, contacts, calendar and so on. Why we can not choose which iCloud account we want for our photos? My wife and I have separate apple ID, you can easily share contacts that we can simply use some iCloud/
-
DV6775US: HP DV 6775US two other devices listed 10 windows Device Manager
I was reading the Forum and see many posts similar but not specific to my problem. Please see screenshots of the device ID someone can tell me what device or devices that you referiing at? My card reader works probably isn't that the only things left
-
Replace wireless card for laptop G62?
Hi all I have a laptop G62-18sa HP with standard RT3090 wifi + bluetooth combo card in and I was wondering if I can replace it at all? I was looking at this map http://is.gd/nNjsK8 I ask because the RT3090 card has very, VERY poor support for Linux
-
How install us Windows 7 which is download from Microsoft Store on XP Pro
How install us Windows 7 which is download from Microsoft Store on XP Pro
-
Basic information. on my computer. > Right to copy of WINDOWS 7 HOME PREMIUM 2009 SERVICE PACK 1 System = Model = HP PRO DESK GI 400 MT Processor = Intel Core i5 - 4690 S CPU @ 3.20 GHz 3,20 GHz Installed memory (RAM): 8.00 GB System type = 64 - bit