My wireless will not connect WIN8/8.1/10

Similar Questions

• After these recent MS Update, Wireless will not connect XP PRO Dell Inspiron 510 M

  After a recent Update MS, my wireless is not connecting to my home network.

  I've set up as a network secured using WEP.  I checked that the key/password is correct.  He gets in that the acquisition of the IP address, & goes no further.

  I downloaded what I believe to be the latest driver for the Intel Pro/Wireless LAN 2100 3 device has.

  Deleted & reinstalled the device (network connections now watch as Wireless connection 3..)

  MS security Esentials finds no viruses, Defender detects no problem either.

  You b uninstall Norton Security Suite AND THEN (b) download/run the Norton removal tool [1] & restart (c) BEFORE you installed MSE?

  Note: most Windows XP computers came with a Norton or McAfee free trial pre-installed. When you perform a clean installation of Windows XP by using the disks that came with the computer or the hidden restore partition, the free trialware is reinstalled (but invalid). You MUST (a) uninstall the free-trial version AND THEN (b) download/run the appropriate removal tool & restart (c) PRIOR to installation of a legitimate antivirus application (for example, Norton Security Suite freebie) AND BEFORE install any update of Windows (including the Service Packs & IE8).

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Additional references may include:

  Checklist for installation of Microsoft Security Essentials
  http://answers.Microsoft.com/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

  ==================================================================
  [1] ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

• Wireless will not connect winxp - sp3

  I just do a restore on a compaq presario v4000.  network cable and internet works fine.  Unable to get a wireless ip address.  have updated driver, bought an external wireless-card will get an ip address.  When I put a static ip address, it says it's connected, but still not recognized by the router or can not access the internet.  other devices on the network are very good.  Reset everything, adjusted the settings of the card, disabled wzc, reactivated, rebooted the router and laptop computer, uninstalled and reinstalled the wireless devices.  turned off the firewall and anti-virus-no joy.  congested DNS, winsock reset, rebooted... nothing.  It's driving me crazy.

  C:\>ipconfig

  Windows IP configuration

  Ethernet card 3 wireless network connection:

  The connection-specific DNS suffix. :

  ... Autoconfiguration IP address: 169.254.5.95

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : domain_not_set.i

  IP address...: 192.168.1.70

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.1.1.
  I don't know what else to try... any suggestions?

  If disabling all security features on the router (encryption, MAC filters, etc.) does not work, then check the router use the same mode of wifi as your wireless adapter.  It is most frequently observed with older wireless-B adapters where the router is configured for wireless - g only, but it could also be that you have a new router Wireless N only the value and your wireless - g adapter.

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• 305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

  A new router through Talktalk and since then my printer Wireless does not connect.  It shows on my chromebook as this has already been added as a printer of cloud, but blue light wireless flashes.  Not had any problems before this that he was that we got the new router.  Tired to connect by using the method of the button/PIN button still no joy.

  Please note using Toshiba chromebook on windows/mac.

  Please help as I am ready to scream! Laughing out loud

  Longess

  Hello @longess,

  Welcome to the HP support forums.

  I understand that you have acquired a new router and get your Deskjet 3050 has connected to your new network.

  I would like to help.

  The blue light is flashing on the printer indicates that the wireless radio is on, but the printer is not connected to a network. This is the situation. You have a new router. The printer must be on the network.

  So the next step is to get the printer on the network.

  The deskjet printers family is usually USB wireless setup.

  This causes an obstacle when you use only a Chromebook.

  Chromebook does not support the software needed to turn the printer on the network.

  If you have access to a Windows or Macbook notebook, the following link will help you place the printer on the network.

  Configure the printer to a wireless network for the HP Deskjet 3050 a and 3070 e-all-in-one printer series

  I have something you can try.

  Check out this post from Sunshyn2005.

  Re: Deskjet 3050 does not connect to my wifi network

  If this message does not help to get on the new network printer, you will need to borrow a Mac or Windows computer.

  Good luck

• HP 7520: HP 7520 will not connect to the wireless network

  There is some additional information to

  http://forums.Xfinity.com/T5/home-networking-router-WiFi/HP-7520-will-not-connect-to-wireless-networ...

  on this issue.

  Have several APs for a single wireless network allows the printer foolish law.  (Not a Repeater, a second AP connected to the local network with the same configuration of network for security, etc.).

  I solved this problem.  In accordance with the discussion on the link, the problem is that the printer cannot connect to a wireless network if there is greater than 1 for a wireless network (SSID) name wireless access point.

  This thread has had several useful suggestions, but what finally solved the problem, it's the second point has access to a mode where I can create a 'virtual' access point and, above all, a SSID associated.

  Note that not all access points or routers support virtual APs, but this function seems to be more common over time.  Older models is not able to do that.  However, a new access point is sometimes cheaper than a new printer.

  If you do not understand the jargon in the procedure below, I recommend that you find someone who does, then they can do it for you.

  Solution:

  1. On one of the wireless access on the network, create an a new virtual AP with a slightly different name SSID (for example < name of the network - > _1), on the same VLAN (usually VLAN 1).  You may need to put the AP in "multiple AP mode" or something similar, and then restart the AP.  All other settings (DHCP, security, mixed mode b/g/n, etc.) must be the same for the new SSID.
  2. Run the printer Wireless Setup and connect it to this new SSID
  3. Confirm that the printer can be seen by other devices on the network

  Tips:

  • Check the security is the same as the original SSID, Alternatively you can create a vector of insecurity in your network.  Do not WEP-128 when the other SSID uses WPA2 AES, for example.
  • The AP I had had several resets to make it work because of the mode and parameter changes.
  • If you connect the SSID but cannot connect to or be seen by anything on your network, check the new SSID/AP is in the same VLAN as the original.
  • Because the printer is not roaming, and the speed is not a problem for me, I used the access point that could support this solution, which is deeper and slower than my primary AP.  I have not noticed any problems.

  The printer has been reliable on the wireless now on the new SSID, 48 hours.

  I have not upgraded any software on a client of the printer (PC, Mac, phones).

  I think that it is a positive confirmation that the problem is with the implementation of the printer of the stack of network and not with the driver or client software on remote devices.  The 802.11 protocols provide for a network name (SSID) wireless with several access points using different MAC addresses.  I suggest this HP look into this as a potential bug with their network printer for the 7520 protocols stack.

• Apple wireless keyboard will not connect to mac mini

  Apple aluminum wireless keyboard will not connect to mac mini. He worked the other day and when you press the power button gives me a green light for a few seconds. I removed from my bluetooth devices and removed the batteries which did nothing. It will not go into the mode of discovery, but he recognizes the keyboard and fails to connect.

  So much for some reason any it plugged into my macbook of brothers.

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• my laptop will not connect wireless

  my new hp laptop windows 8 will not connect to my wireless internet. It will be after I restart, but after a few minutes, it goes with limited access. How can I fix?

  Hello erobb14,

  We will try to remove your Wi - Fi card and let Windows to install it again. This will reset any options or configuration errors that may have been applied.

  Press and hold the Windows key and press W.
  In the search bar, type "Device Manager" (without the quotes) and press ENTER.

  Once inside the Device Manager, please find and unfold the group named "network adapters".
  From there, to identify your wireless card (it will very probably include the word "wireless" or "802.11".

  Now, right click on the wireless network device and click "Uninstall".
  If you're facing a check box asking if you want to remove the driver as well, please let it be empty.

  After the device has been uninstalled, restart your device and try to connect to the wireless again.

  I would like to know how that works for you.

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• V525W printer will not connect wireless

  I just moved and had to change my ISP.  Now, my V525W printer which was working fine, will not connect wireless.

  When I try to reinstall the printer, the program stops after I connect the USB "put in place by cable".  The CONTINUE button dark rest.

  I tried every suggstion I find on the Board for more than three hours and still not get this piece of junk to work.

  I have an all-in-one Dell XPS running Windows 7 machine.

  Can someone please?

  Rick,

  After a few "cooling off" days, I decided to TANOE this problem again and it seems that I finally work!

  I went in the menu on the printer and restore the default settings.  I always had the same problem with the Installation of the Dell program I went into the Windows 7 Control Panel and clicked on "Add a wireless device to the network."  He immediately recognized the printer and I followed the steps until the light green enabled WiFi fixed.   Then, I went through the installation of Dell again and was able to print, scan, etc.

  Thanks again,

  Tom

• Windows 8 will not connect wireless automatically and sfc/scannow error

  Hey,.

  I have a problem and I hope that some of you may be able to answer. I have a desktop running Windows 8 x 64 which, no matter what I try, just usually don't forget I connect WIFI at home. Every time I start the PC I have to go into the details again once I tried everything (several times), new drivers and virtually all of the suggestions emanating from the research on various forums.
  I say this because when I tried to run the "sfc/scannow" in an elevated cmd, it comes up with an error.

  http://www.Neowin.NET/forum/uploads/monthly_05_2011/post-336322-0-01396700-1305440203.jpg

  Error is the same that above, looking in the CBS.log newspaper he does not mention that it is unable to repair the files of numerours including some relationships Wi - Fi so I don't know whether they are connected or not.

  The wireless network card is the USB - N13 by Asus.

  The wireless works fine on my laptop and my GFs Macbook.

  Anyone has any idea as how to fix WIFI details don't forget not the "sfc/scannow"?

  Kind regards
   
  Jens

  Hello

  I would have you try responses in the thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wireless-network-will-not-connect-automatically-on/4b34d624-81f6-4972-a34a-a74fd1825dd8

  Also applies to Windows 8.

  We know how it turns out for you.

• iPad will not connect to internet

  Hello

  Recently I replaced my router wireless with an old faithful that d-Link DSL - 502T cable modem as I have now 2 extreme airport to handle a Wi - Fi. I have now a much faster internet access on my Macbook Pro, but my iPad 2 now will not connect to internet.

  Airport utility on the iPad shows that the internet is disconnected, but I don't know how to solve this problem.

  The two airports are configured in Bridge mode. Help someone?

  If you have LAN - 502T running as the main router.

  Bridge the airport should simply pass the DHCP via the Dlink but sometimes it's a failure.

  The two AE connected directly to the modem or the other?

  I would recommend the static method of intellectual property.

  https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

  In this method, you must first AE plugged directly to the Dlink and the second AE connected in the first and bridge... it will dhcp to EI and is often a better configuration with Apple gear. Worth a try.